dmam_free_coherent() frees a DMA allocation, which makes the
freed vaddr available for reuse, then calls devres_destroy()
to remove and free the data structure used to track the DMA
allocation. Between the two calls, it is possible for a
concurrent task to make an allocation with the same vaddr
and add it to the devres list.

If this happens, there will be two entries in the devres list
with the same vaddr and devres_destroy() can free the wrong
entry, triggering the WARN_ON() in dmam_match.

Fix by destroying the devres entry before freeing the DMA
allocation.

Tested:
  kokonut //net/encryption
    http://sponge2/b9145fe6-0f72-4325-ac2f-a84d81075b03

Fixes: 9ac7849e35f7 ("devres: device resource management")
Signed-off-by: Lance Richardson <rlance@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Pull dma-mapping updates from Christoph Hellwig:

 - optimize DMA sync calls when they are no-ops (Alexander Lobakin)

 - fix swiotlb padding for untrusted devices (Michael Kelley)

 - add documentation for swiotb (Michael Kelley)

* tag 'dma-mapping-6.10-2024-05-20' of git://git.infradead.org/users/hch/dma-mapping:
  dma: fix DMA sync for drivers not calling dma_set_mask*()
  xsk: use generic DMA sync shortcut instead of a custom one
  page_pool: check for DMA sync shortcut earlier
  page_pool: don't use driver-set flags field directly
  page_pool: make sure frag API fields don't span between cachelines
  iommu/dma: avoid expensive indirect calls for sync operations
  dma: avoid redundant calls for sync operations
  dma: compile-out DMA sync op calls when not used
  iommu/dma: fix zeroing of bounce buffer padding used by untrusted devices
  swiotlb: remove alloc_size argument to swiotlb_tbl_map_single()
  Documentation/core-api: add swiotlb documentation

There are several reports that the DMA sync shortcut broke non-coherent
devices.
dev->dma_need_sync is false after the &device allocation and if a driver
didn't call dma_set_mask*(), it will still be false even if the device
is not DMA-coherent and thus needs synchronizing. Due to historical
reasons, there's still a lot of drivers not calling it.
Invert the boolean, so that the sync will be performed by default and
the shortcut will be enabled only when calling dma_set_mask*().

Reported-by: Steven Price <steven.price@arm.com>
Closes: https://lore.kernel.org/lkml/010686f5-3049-46a1-8230-7752a1b433ff@arm.com
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/lkml/46160534-5003-4809-a408-6b3a3f4921e9@samsung.com
Fixes: f406c8e4b770. ("dma: avoid redundant calls for sync operations")
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Steven Price <steven.price@arm.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>

Quite often, devices do not need dma_sync operations on x86_64 at least.
Indeed, when dev_is_dma_coherent(dev) is true and
dev_use_swiotlb(dev) is false, iommu_dma_sync_single_for_cpu()
and friends do nothing.

However, indirectly calling them when CONFIG_RETPOLINE=y consumes about
10% of cycles on a cpu receiving packets from softirq at ~100Gbit rate.
Even if/when CONFIG_RETPOLINE is not set, there is a cost of about 3%.

Add dev->need_dma_sync boolean and turn it off during the device
initialization (dma_set_mask()) depending on the setup:
dev_is_dma_coherent() for the direct DMA, !(sync_single_for_device ||
sync_single_for_cpu) or the new dma_map_ops flag, %DMA_F_CAN_SKIP_SYNC,
advertised for non-NULL DMA ops.
Then later, if/when swiotlb is used for the first time, the flag
is reset back to on, from swiotlb_tbl_map_single().

On iavf, the UDP trafficgen with XDP_DROP in skb mode test shows
+3-5% increase for direct DMA.

Suggested-by: Christoph Hellwig <hch@lst.de> # direct DMA shortcut
Co-developed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Some platforms do have DMA, but DMA there is always direct and coherent.
Currently, even on such platforms DMA sync operations are compiled and
called.
Add a new hidden Kconfig symbol, DMA_NEED_SYNC, and set it only when
either sync operations are needed or there is DMA ops or swiotlb
or DMA debug is enabled. Compile global dma_sync_*() and dma_need_sync()
only when it's set, otherwise provide empty inline stubs.
The change allows for future optimizations of DMA sync calls depending
on runtime conditions.

Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

After redefining alloc_pages, all uses of that name are being replaced. 
Change the conflicting names to prevent preprocessor from replacing them
when it's not intended.

Link: https://lkml.kernel.org/r/20240321163705.3067592-18-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Tested-by: Kees Cook <keescook@chromium.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andreas Hindborg <a.hindborg@samsung.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: "Björn Roy Baron" <bjorn3_gh@protonmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Gary Guo <gary@garyguo.net>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

There is an unusual case that the range map covers right up to the top
of system RAM, but leaves a hole somewhere lower down. Then it prevents
the nvme device dma mapping in the checking path of phys_to_dma() and
causes the hangs at boot.

E.g. On an Armv8 Ampere server, the dsdt ACPI table is:
 Method (_DMA, 0, Serialized)  // _DMA: Direct Memory Access
            {
                Name (RBUF, ResourceTemplate ()
                {
                    QWordMemory (ResourceConsumer, PosDecode, MinFixed,
MaxFixed, Cacheable, ReadWrite,
                        0x0000000000000000, // Granularity
                        0x0000000000000000, // Range Minimum
                        0x00000000FFFFFFFF, // Range Maximum
                        0x0000000000000000, // Translation Offset
                        0x0000000100000000, // Length
                        ,, , AddressRangeMemory, TypeStatic)
                    QWordMemory (ResourceConsumer, PosDecode, MinFixed,
MaxFixed, Cacheable, ReadWrite,
                        0x0000000000000000, // Granularity
                        0x0000006010200000, // Range Minimum
                        0x000000602FFFFFFF, // Range Maximum
                        0x0000000000000000, // Translation Offset
                        0x000000001FE00000, // Length
                        ,, , AddressRangeMemory, TypeStatic)
                    QWordMemory (ResourceConsumer, PosDecode, MinFixed,
MaxFixed, Cacheable, ReadWrite,
                        0x0000000000000000, // Granularity
                        0x00000060F0000000, // Range Minimum
                        0x00000060FFFFFFFF, // Range Maximum
                        0x0000000000000000, // Translation Offset
                        0x0000000010000000, // Length
                        ,, , AddressRangeMemory, TypeStatic)
                    QWordMemory (ResourceConsumer, PosDecode, MinFixed,
MaxFixed, Cacheable, ReadWrite,
                        0x0000000000000000, // Granularity
                        0x0000007000000000, // Range Minimum
                        0x000003FFFFFFFFFF, // Range Maximum
                        0x0000000000000000, // Translation Offset
                        0x0000039000000000, // Length
                        ,, , AddressRangeMemory, TypeStatic)
                })

But the System RAM ranges are:
cat /proc/iomem |grep -i ram
90000000-91ffffff : System RAM
92900000-fffbffff : System RAM
880000000-fffffffff : System RAM
8800000000-bff5990fff : System RAM
bff59d0000-bff5a4ffff : System RAM
bff8000000-bfffffffff : System RAM
So some RAM ranges are out of dma_range_map.

Fix it by checking whether each of the system RAM resources can be
properly encompassed within the dma_range_map.

Signed-off-by: Jia He <justin.he@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

This patch moves dma_addressing_limited() out of line, serving as a
preliminary step to prevent the introduction of a new publicly accessible
low-level helper when validating whether all system RAM is mapped within
the DMA mapping range.

Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jia He <justin.he@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

This function has a __weak definition and an override that is only used on
freescale powerpc chips. The powerpc definition however does not see the
declaration that is in a .c file:

arch/powerpc/kernel/dma-mask.c:7:6: error: no previous prototype for 'arch_dma_set_mask' [-Werror=missing-prototypes]

Move it into the linux/dma-map-ops.h header where the other arch_dma_* functions
are declared.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Provide a kconfig option to allow arches to manipulate default
value of dma_default_coherent in Kconfig.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>