Pull SCSI updates from James Bottomley:
 "This series consists of the usual driver updates (ufs, ibmvfc,
  megaraid_sas, lpfc, elx, mpi3mr, qedi, iscsi, storvsc, mpt3sas) with
  elx and mpi3mr being new drivers.

  The major core change is a rework to drop the status byte handling
  macros and the old bit shifted definitions and the rest of the updates
  are minor fixes"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (287 commits)
  scsi: aha1740: Avoid over-read of sense buffer
  scsi: arcmsr: Avoid over-read of sense buffer
  scsi: ips: Avoid over-read of sense buffer
  scsi: ufs: ufs-mediatek: Add missing of_node_put() in ufs_mtk_probe()
  scsi: elx: libefc: Fix IRQ restore in efc_domain_dispatch_frame()
  scsi: elx: libefc: Fix less than zero comparison of a unsigned int
  scsi: elx: efct: Fix pointer error checking in debugfs init
  scsi: elx: efct: Fix is_originator return code type
  scsi: elx: efct: Fix link error for _bad_cmpxchg
  scsi: elx: efct: Eliminate unnecessary boolean check in efct_hw_command_cancel()
  scsi: elx: efct: Do not use id uninitialized in efct_lio_setup_session()
  scsi: elx: efct: Fix error handling in efct_hw_init()
  scsi: elx: efct: Remove redundant initialization of variable lun
  scsi: elx: efct: Fix spelling mistake "Unexected" -> "Unexpected"
  scsi: lpfc: Fix build error in lpfc_scsi.c
  scsi: target: iscsi: Remove redundant continue statement
  scsi: qla4xxx: Remove redundant continue statement
  scsi: ppa: Switch to use module_parport_driver()
  scsi: imm: Switch to use module_parport_driver()
  scsi: mpt3sas: Fix error return value in _scsih_expander_add()
  ...

Pull cgroup updates from Tejun Heo:

 - cgroup.kill is added which implements atomic killing of the whole
   subtree.

   Down the line, this should be able to replace the multiple userland
   implementations of "keep killing till empty".

 - PSI can now be turned off at boot time to avoid overhead for
   configurations which don't care about PSI.

* 'for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: make per-cgroup pressure stall tracking configurable
  cgroup: Fix kernel-doc
  cgroup: inline cgroup_task_freeze()
  tests/cgroup: test cgroup.kill
  tests/cgroup: move cg_wait_for(), cg_prepare_for_wait()
  tests/cgroup: use cgroup.kill in cg_killall()
  docs/cgroup: add entry for cgroup.kill
  cgroup: introduce cgroup.kill

The current code only associates with the existing blkcg when aio is used
to access the backing file.  This patch covers all types of i/o to the
backing file and also associates the memcg so if the backing file is on
tmpfs, memory is charged appropriately.

This patch also exports cgroup_get_e_css and int_active_memcg so it can be
used by the loop module.

Link: https://lkml.kernel.org/r/20210610173944.1203706-4-schatzberg.dan@gmail.com
Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
Cc: Chris Down <chris@chrisdown.name>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add a new function, cgroup_get_from_id(), to retrieve the cgroup associated
with a cgroup id. Also export the function cgroup_get_e_css() as this is
needed in blk-cgroup.h.

Link: https://lore.kernel.org/r/20210608043556.274139-2-muneendra.kumar@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Muneendra Kumar <muneendra.kumar@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

PSI accounts stalls for each cgroup separately and aggregates it at each
level of the hierarchy. This causes additional overhead with psi_avgs_work
being called for each cgroup in the hierarchy. psi_avgs_work has been
highly optimized, however on systems with large number of cgroups the
overhead becomes noticeable.
Systems which use PSI only at the system level could avoid this overhead
if PSI can be configured to skip per-cgroup stall accounting.
Add "cgroup_disable=pressure" kernel command-line option to allow
requesting system-wide only pressure stall accounting. When set, it
keeps system-wide accounting under /proc/pressure/ but skips accounting
for individual cgroups and does not expose PSI nodes in cgroup hierarchy.

Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Tejun Heo <tj@kernel.org>

Fix function name in cgroup.c and rstat.c kernel-doc comment
to remove these warnings found by clang_w1.

kernel/cgroup/cgroup.c:2401: warning: expecting prototype for
cgroup_taskset_migrate(). Prototype was for cgroup_migrate_execute()
instead.
kernel/cgroup/rstat.c:233: warning: expecting prototype for
cgroup_rstat_flush_begin(). Prototype was for cgroup_rstat_flush_hold()
instead.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Fixes: 'commit e595cd706982 ("cgroup: track migration context in cgroup_mgctx")'
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

Fix some spelling mistakes in comments:
hierarhcy ==> hierarchy
automtically ==> automatically
overriden ==> overridden
In absense of .. or ==> In absence of .. and
assocaited ==> associated
taget ==> target
initate ==> initiate
succeded ==> succeeded
curremt ==> current
udpated ==> updated

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

This patch effectively reverts the commit a3e72739b7a7 ("cgroup: fix
too early usage of static_branch_disable()"). The commit 6041186a3258
("init: initialize jump labels before command line option parsing") has
moved the jump_label_init() before parse_args() which has made the
commit a3e72739b7a7 unnecessary. On the other hand there are
consequences of disabling the controllers later as there are subsystems
doing the controller checks for different decisions. One such incident
is reported [1] regarding the memory controller and its impact on memory
reclaim code.

[1] https://lore.kernel.org/linux-mm/921e53f3-4b13-aab8-4a9e-e83ff15371e4@nec.com

Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reported-by: NOMURA JUNICHI(野村　淳一) <junichi.nomura@nec.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Tested-by: Jun'ichi Nomura <junichi.nomura@nec.com>

After the introduction of the cgroup.kill there is only one call site
of cgroup_task_freeze() left: cgroup_exit(). cgroup_task_freeze() is
currently taking rcu_read_lock() to read task's cgroup flags, but
because it's always called with css_set_lock locked, the rcu protection
is excessive.

Simplify the code by inlining cgroup_task_freeze().

v2: fix build

Signed-off-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>