linux-stable.git/kernel/bpf, branch v5.8.4 Linux kernel stable tree bpf: Use get_file_rcu() instead of get_file() for task_file iterator 2020-08-26T09:49:17+00:00 Yonghong Song yhs@fb.com 2020-08-17T17:42:14+00:00 63f10205a215f9cdb527102ce394da03fa635ab3 [ Upstream commit cf28f3bbfca097d956f9021cb710dfad56adcc62 ] With latest `bpftool prog` command, we observed the following kernel panic. BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor instruction fetch in kernel mode #PF: error_code(0x0010) - not-present page PGD dfe894067 P4D dfe894067 PUD deb663067 PMD 0 Oops: 0010 [#1] SMP CPU: 9 PID: 6023 ... RIP: 0010:0x0 Code: Bad RIP value. RSP: 0000:ffffc900002b8f18 EFLAGS: 00010286 RAX: ffff8883a405f400 RBX: ffff888e46a6bf00 RCX: 000000008020000c RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8883a405f400 RBP: ffff888e46a6bf50 R08: 0000000000000000 R09: ffffffff81129600 R10: ffff8883a405f300 R11: 0000160000000000 R12: 0000000000002710 R13: 000000e9494b690c R14: 0000000000000202 R15: 0000000000000009 FS: 00007fd9187fe700(0000) GS:ffff888e46a40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 0000000de5d33002 CR4: 0000000000360ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> rcu_core+0x1a4/0x440 __do_softirq+0xd3/0x2c8 irq_exit+0x9d/0xa0 smp_apic_timer_interrupt+0x68/0x120 apic_timer_interrupt+0xf/0x20 </IRQ> RIP: 0033:0x47ce80 Code: Bad RIP value. RSP: 002b:00007fd9187fba40 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13 RAX: 0000000000000002 RBX: 00007fd931789160 RCX: 000000000000010c RDX: 00007fd9308cdfb4 RSI: 00007fd9308cdfb4 RDI: 00007ffedd1ea0a8 RBP: 00007fd9187fbab0 R08: 000000000000000e R09: 000000000000002a R10: 0000000000480210 R11: 00007fd9187fc570 R12: 00007fd9316cc400 R13: 0000000000000118 R14: 00007fd9308cdfb4 R15: 00007fd9317a9380 After further analysis, the bug is triggered by Commit eaaacd23910f ("bpf: Add task and task/file iterator targets") which introduced task_file bpf iterator, which traverses all open file descriptors for all tasks in the current namespace. The latest `bpftool prog` calls a task_file bpf program to traverse all files in the system in order to associate processes with progs/maps, etc. When traversing files for a given task, rcu read_lock is taken to access all files in a file_struct. But it used get_file() to grab a file, which is not right. It is possible file->f_count is 0 and get_file() will unconditionally increase it. Later put_file() may cause all kind of issues with the above as one of sympotoms. The failure can be reproduced with the following steps in a few seconds: $ cat t.c #include <stdio.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> #define N 10000 int fd[N]; int main() { int i; for (i = 0; i < N; i++) { fd[i] = open("./note.txt", 'r'); if (fd[i] < 0) { fprintf(stderr, "failed\n"); return -1; } } for (i = 0; i < N; i++) close(fd[i]); return 0; } $ gcc -O2 t.c $ cat run.sh #/bin/bash for i in {1..100} do while true; do ./a.out; done & done $ ./run.sh $ while true; do bpftool prog >& /dev/null; done This patch used get_file_rcu() which only grabs a file if the file->f_count is not zero. This is to ensure the file pointer is always valid. The above reproducer did not fail for more than 30 minutes. Fixes: eaaacd23910f ("bpf: Add task and task/file iterator targets") Suggested-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Link: https://lore.kernel.org/bpf/20200817174214.252601-1-yhs@fb.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit cf28f3bbfca097d956f9021cb710dfad56adcc62 ]

With latest `bpftool prog` command, we observed the following kernel
panic.
    BUG: kernel NULL pointer dereference, address: 0000000000000000
    #PF: supervisor instruction fetch in kernel mode
    #PF: error_code(0x0010) - not-present page
    PGD dfe894067 P4D dfe894067 PUD deb663067 PMD 0
    Oops: 0010 [#1] SMP
    CPU: 9 PID: 6023 ...
    RIP: 0010:0x0
    Code: Bad RIP value.
    RSP: 0000:ffffc900002b8f18 EFLAGS: 00010286
    RAX: ffff8883a405f400 RBX: ffff888e46a6bf00 RCX: 000000008020000c
    RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8883a405f400
    RBP: ffff888e46a6bf50 R08: 0000000000000000 R09: ffffffff81129600
    R10: ffff8883a405f300 R11: 0000160000000000 R12: 0000000000002710
    R13: 000000e9494b690c R14: 0000000000000202 R15: 0000000000000009
    FS:  00007fd9187fe700(0000) GS:ffff888e46a40000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: ffffffffffffffd6 CR3: 0000000de5d33002 CR4: 0000000000360ee0
    DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
    Call Trace:
     <IRQ>
     rcu_core+0x1a4/0x440
     __do_softirq+0xd3/0x2c8
     irq_exit+0x9d/0xa0
     smp_apic_timer_interrupt+0x68/0x120
     apic_timer_interrupt+0xf/0x20
     </IRQ>
    RIP: 0033:0x47ce80
    Code: Bad RIP value.
    RSP: 002b:00007fd9187fba40 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13
    RAX: 0000000000000002 RBX: 00007fd931789160 RCX: 000000000000010c
    RDX: 00007fd9308cdfb4 RSI: 00007fd9308cdfb4 RDI: 00007ffedd1ea0a8
    RBP: 00007fd9187fbab0 R08: 000000000000000e R09: 000000000000002a
    R10: 0000000000480210 R11: 00007fd9187fc570 R12: 00007fd9316cc400
    R13: 0000000000000118 R14: 00007fd9308cdfb4 R15: 00007fd9317a9380

After further analysis, the bug is triggered by
Commit eaaacd23910f ("bpf: Add task and task/file iterator targets")
which introduced task_file bpf iterator, which traverses all open file
descriptors for all tasks in the current namespace.
The latest `bpftool prog` calls a task_file bpf program to traverse
all files in the system in order to associate processes with progs/maps, etc.
When traversing files for a given task, rcu read_lock is taken to
access all files in a file_struct. But it used get_file() to grab
a file, which is not right. It is possible file->f_count is 0 and
get_file() will unconditionally increase it.
Later put_file() may cause all kind of issues with the above
as one of sympotoms.

The failure can be reproduced with the following steps in a few seconds:
    $ cat t.c
    #include <stdio.h>
    #include <sys/types.h>
    #include <sys/stat.h>
    #include <fcntl.h>
    #include <unistd.h>

    #define N 10000
    int fd[N];
    int main() {
      int i;

      for (i = 0; i < N; i++) {
        fd[i] = open("./note.txt", 'r');
        if (fd[i] < 0) {
           fprintf(stderr, "failed\n");
           return -1;
        }
      }
      for (i = 0; i < N; i++)
        close(fd[i]);

      return 0;
    }
    $ gcc -O2 t.c
    $ cat run.sh
    #/bin/bash
    for i in {1..100}
    do
      while true; do ./a.out; done &
    done
    $ ./run.sh
    $ while true; do bpftool prog >& /dev/null; done

This patch used get_file_rcu() which only grabs a file if the
file->f_count is not zero. This is to ensure the file pointer
is always valid. The above reproducer did not fail for more
than 30 minutes.

Fixes: eaaacd23910f ("bpf: Add task and task/file iterator targets")
Suggested-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/bpf/20200817174214.252601-1-yhs@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
bpf: Fix pos computation for bpf_iter seq_ops->start() 2020-08-19T06:26:44+00:00 Yonghong Song yhs@fb.com 2020-07-22T19:51:56+00:00 1e43aee1568e5ea9884111e02c3d1f722efaa192 [ Upstream commit 3f9969f2c040ba2ba635b6b5a7051f404bcc634d ] Currently, the pos pointer in bpf iterator map/task/task_file seq_ops->start() is always incremented. This is incorrect. It should be increased only if *pos is 0 (for SEQ_START_TOKEN) since these start() function actually returns the first real object. If *pos is not 0, it merely found the object based on the state in seq->private, and not really advancing the *pos. This patch fixed this issue by only incrementing *pos if it is 0. Note that the old *pos calculation, although not correct, does not affect correctness of bpf_iter as bpf_iter seq_file->read() does not support llseek. This patch also renamed "mid" in bpf_map iterator seq_file private data to "map_id" for better clarity. Fixes: 6086d29def80 ("bpf: Add bpf_map iterator") Fixes: eaaacd23910f ("bpf: Add task and task/file iterator targets") Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200722195156.4029817-1-yhs@fb.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 3f9969f2c040ba2ba635b6b5a7051f404bcc634d ]

Currently, the pos pointer in bpf iterator map/task/task_file
seq_ops->start() is always incremented.
This is incorrect. It should be increased only if
*pos is 0 (for SEQ_START_TOKEN) since these start()
function actually returns the first real object.
If *pos is not 0, it merely found the object
based on the state in seq->private, and not really
advancing the *pos. This patch fixed this issue
by only incrementing *pos if it is 0.

Note that the old *pos calculation, although not
correct, does not affect correctness of bpf_iter
as bpf_iter seq_file->read() does not support llseek.

This patch also renamed "mid" in bpf_map iterator
seq_file private data to "map_id" for better clarity.

Fixes: 6086d29def80 ("bpf: Add bpf_map iterator")
Fixes: eaaacd23910f ("bpf: Add task and task/file iterator targets")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200722195156.4029817-1-yhs@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf 2020-08-01T00:19:47+00:00 David S. Miller davem@davemloft.net 2020-08-01T00:19:47+00:00 69138b34a7248d2396ab85c8652e20c0c39beaba Daniel Borkmann says: ==================== pull-request: bpf 2020-07-31 The following pull-request contains BPF updates for your *net* tree. We've added 5 non-merge commits during the last 21 day(s) which contain a total of 5 files changed, 126 insertions(+), 18 deletions(-). The main changes are: 1) Fix a map element leak in HASH_OF_MAPS map type, from Andrii Nakryiko. 2) Fix a NULL pointer dereference in __btf_resolve_helper_id() when no btf_vmlinux is available, from Peilin Ye. 3) Init pos variable in __bpfilter_process_sockopt(), from Christoph Hellwig. 4) Fix a cgroup sockopt verifier test by specifying expected attach type, from Jean-Philippe Brucker. Note that when net gets merged into net-next later on, there is a small merge conflict in kernel/bpf/btf.c between commit 5b801dfb7feb ("bpf: Fix NULL pointer dereference in __btf_resolve_helper_id()") from the bpf tree and commit 138b9a0511c7 ("bpf: Remove btf_id helpers resolving") from the net-next tree. Resolve as follows: remove the old hunk with the __btf_resolve_helper_id() function. Change the btf_resolve_helper_id() so it actually tests for a NULL btf_vmlinux and bails out: int btf_resolve_helper_id(struct bpf_verifier_log *log, const struct bpf_func_proto *fn, int arg) { int id; if (fn->arg_type[arg] != ARG_PTR_TO_BTF_ID || !btf_vmlinux) return -EINVAL; id = fn->btf_id[arg]; if (!id || id > btf_vmlinux->nr_types) return -EINVAL; return id; } Let me know if you run into any others issues (CC'ing Jiri Olsa so he's in the loop with regards to merge conflict resolution). ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 
Daniel Borkmann says:

====================
pull-request: bpf 2020-07-31

The following pull-request contains BPF updates for your *net* tree.

We've added 5 non-merge commits during the last 21 day(s) which contain
a total of 5 files changed, 126 insertions(+), 18 deletions(-).

The main changes are:

1) Fix a map element leak in HASH_OF_MAPS map type, from Andrii Nakryiko.

2) Fix a NULL pointer dereference in __btf_resolve_helper_id() when no
   btf_vmlinux is available, from Peilin Ye.

3) Init pos variable in __bpfilter_process_sockopt(), from Christoph Hellwig.

4) Fix a cgroup sockopt verifier test by specifying expected attach type,
   from Jean-Philippe Brucker.

Note that when net gets merged into net-next later on, there is a small
merge conflict in kernel/bpf/btf.c between commit 5b801dfb7feb ("bpf: Fix
NULL pointer dereference in __btf_resolve_helper_id()") from the bpf tree
and commit 138b9a0511c7 ("bpf: Remove btf_id helpers resolving") from the
net-next tree.

Resolve as follows: remove the old hunk with the __btf_resolve_helper_id()
function. Change the btf_resolve_helper_id() so it actually tests for a
NULL btf_vmlinux and bails out:

int btf_resolve_helper_id(struct bpf_verifier_log *log,
                          const struct bpf_func_proto *fn, int arg)
{
        int id;

        if (fn->arg_type[arg] != ARG_PTR_TO_BTF_ID || !btf_vmlinux)
                return -EINVAL;
        id = fn->btf_id[arg];
        if (!id || id > btf_vmlinux->nr_types)
                return -EINVAL;
        return id;
}

Let me know if you run into any others issues (CC'ing Jiri Olsa so he's in
the loop with regards to merge conflict resolution).
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
bpf: Fix map leak in HASH_OF_MAPS map 2020-07-29T23:30:22+00:00 Andrii Nakryiko andriin@fb.com 2020-07-29T04:09:12+00:00 1d4e1eab456e1ee92a94987499b211db05f900ea Fix HASH_OF_MAPS bug of not putting inner map pointer on bpf_map_elem_update() operation. This is due to per-cpu extra_elems optimization, which bypassed free_htab_elem() logic doing proper clean ups. Make sure that inner map is put properly in optimized case as well. Fixes: 8c290e60fa2a ("bpf: fix hashmap extra_elems logic") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20200729040913.2815687-1-andriin@fb.com 
Fix HASH_OF_MAPS bug of not putting inner map pointer on bpf_map_elem_update()
operation. This is due to per-cpu extra_elems optimization, which bypassed
free_htab_elem() logic doing proper clean ups. Make sure that inner map is put
properly in optimized case as well.

Fixes: 8c290e60fa2a ("bpf: fix hashmap extra_elems logic")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200729040913.2815687-1-andriin@fb.com
bpf: Fix NULL pointer dereference in __btf_resolve_helper_id() 2020-07-15T20:53:39+00:00 Peilin Ye yepeilin.cs@gmail.com 2020-07-14T18:09:04+00:00 5b801dfb7feb2738975d80223efc2fc193e55573 Prevent __btf_resolve_helper_id() from dereferencing `btf_vmlinux` as NULL. This patch fixes the following syzbot bug: https://syzkaller.appspot.com/bug?id=f823224ada908fa5c207902a5a62065e53ca0fcc Reported-by: syzbot+ee09bda7017345f1fbe6@syzkaller.appspotmail.com Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200714180904.277512-1-yepeilin.cs@gmail.com 
Prevent __btf_resolve_helper_id() from dereferencing `btf_vmlinux`
as NULL. This patch fixes the following syzbot bug:

    https://syzkaller.appspot.com/bug?id=f823224ada908fa5c207902a5a62065e53ca0fcc

Reported-by: syzbot+ee09bda7017345f1fbe6@syzkaller.appspotmail.com
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200714180904.277512-1-yepeilin.cs@gmail.com
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2020-07-11T01:16:22+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-07-11T01:16:22+00:00 5a764898afec0bc097003e8c3e727792289f76d6 Pull networking fixes from David Miller: 1) Restore previous behavior of CAP_SYS_ADMIN wrt loading networking BPF programs, from Maciej Żenczykowski. 2) Fix dropped broadcasts in mac80211 code, from Seevalamuthu Mariappan. 3) Slay memory leak in nl80211 bss color attribute parsing code, from Luca Coelho. 4) Get route from skb properly in ip_route_use_hint(), from Miaohe Lin. 5) Don't allow anything other than ARPHRD_ETHER in llc code, from Eric Dumazet. 6) xsk code dips too deeply into DMA mapping implementation internals. Add dma_need_sync and use it. From Christoph Hellwig 7) Enforce power-of-2 for BPF ringbuf sizes. From Andrii Nakryiko. 8) Check for disallowed attributes when loading flow dissector BPF programs. From Lorenz Bauer. 9) Correct packet injection to L3 tunnel devices via AF_PACKET, from Jason A. Donenfeld. 10) Don't advertise checksum offload on ipa devices that don't support it. From Alex Elder. 11) Resolve several issues in TCP MD5 signature support. Missing memory barriers, bogus options emitted when using syncookies, and failure to allow md5 key changes in established states. All from Eric Dumazet. 12) Fix interface leak in hsr code, from Taehee Yoo. 13) VF reset fixes in hns3 driver, from Huazhong Tan. 14) Make loopback work again with ipv6 anycast, from David Ahern. 15) Fix TX starvation under high load in fec driver, from Tobias Waldekranz. 16) MLD2 payload lengths not checked properly in bridge multicast code, from Linus Lüssing. 17) Packet scheduler code that wants to find the inner protocol currently only works for one level of VLAN encapsulation. Allow Q-in-Q situations to work properly here, from Toke Høiland-Jørgensen. 18) Fix route leak in l2tp, from Xin Long. 19) Resolve conflict between the sk->sk_user_data usage of bpf reuseport support and various protocols. From Martin KaFai Lau. 20) Fix socket cgroup v2 reference counting in some situations, from Cong Wang. 21) Cure memory leak in mlx5 connection tracking offload support, from Eli Britstein. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (146 commits) mlxsw: pci: Fix use-after-free in case of failed devlink reload mlxsw: spectrum_router: Remove inappropriate usage of WARN_ON() net: macb: fix call to pm_runtime in the suspend/resume functions net: macb: fix macb_suspend() by removing call to netif_carrier_off() net: macb: fix macb_get/set_wol() when moving to phylink net: macb: mark device wake capable when "magic-packet" property present net: macb: fix wakeup test in runtime suspend/resume routines bnxt_en: fix NULL dereference in case SR-IOV configuration fails libbpf: Fix libbpf hashmap on (I)LP32 architectures net/mlx5e: CT: Fix memory leak in cleanup net/mlx5e: Fix port buffers cell size value net/mlx5e: Fix 50G per lane indication net/mlx5e: Fix CPU mapping after function reload to avoid aRFS RX crash net/mlx5e: Fix VXLAN configuration restore after function reload net/mlx5e: Fix usage of rcu-protected pointer net/mxl5e: Verify that rpriv is not NULL net/mlx5: E-Switch, Fix vlan or qos setting in legacy mode net/mlx5: Fix eeprom support for SFP module cgroup: Fix sock_cgroup_data on big-endian. selftests: bpf: Fix detach from sockmap tests ... 
Pull networking fixes from David Miller:

 1) Restore previous behavior of CAP_SYS_ADMIN wrt loading networking
    BPF programs, from Maciej Żenczykowski.

 2) Fix dropped broadcasts in mac80211 code, from Seevalamuthu
    Mariappan.

 3) Slay memory leak in nl80211 bss color attribute parsing code, from
    Luca Coelho.

 4) Get route from skb properly in ip_route_use_hint(), from Miaohe Lin.

 5) Don't allow anything other than ARPHRD_ETHER in llc code, from Eric
    Dumazet.

 6) xsk code dips too deeply into DMA mapping implementation internals.
    Add dma_need_sync and use it. From Christoph Hellwig

 7) Enforce power-of-2 for BPF ringbuf sizes. From Andrii Nakryiko.

 8) Check for disallowed attributes when loading flow dissector BPF
    programs. From Lorenz Bauer.

 9) Correct packet injection to L3 tunnel devices via AF_PACKET, from
    Jason A. Donenfeld.

10) Don't advertise checksum offload on ipa devices that don't support
    it. From Alex Elder.

11) Resolve several issues in TCP MD5 signature support. Missing memory
    barriers, bogus options emitted when using syncookies, and failure
    to allow md5 key changes in established states. All from Eric
    Dumazet.

12) Fix interface leak in hsr code, from Taehee Yoo.

13) VF reset fixes in hns3 driver, from Huazhong Tan.

14) Make loopback work again with ipv6 anycast, from David Ahern.

15) Fix TX starvation under high load in fec driver, from Tobias
    Waldekranz.

16) MLD2 payload lengths not checked properly in bridge multicast code,
    from Linus Lüssing.

17) Packet scheduler code that wants to find the inner protocol
    currently only works for one level of VLAN encapsulation. Allow
    Q-in-Q situations to work properly here, from Toke
    Høiland-Jørgensen.

18) Fix route leak in l2tp, from Xin Long.

19) Resolve conflict between the sk->sk_user_data usage of bpf reuseport
    support and various protocols. From Martin KaFai Lau.

20) Fix socket cgroup v2 reference counting in some situations, from
    Cong Wang.

21) Cure memory leak in mlx5 connection tracking offload support, from
    Eli Britstein.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (146 commits)
  mlxsw: pci: Fix use-after-free in case of failed devlink reload
  mlxsw: spectrum_router: Remove inappropriate usage of WARN_ON()
  net: macb: fix call to pm_runtime in the suspend/resume functions
  net: macb: fix macb_suspend() by removing call to netif_carrier_off()
  net: macb: fix macb_get/set_wol() when moving to phylink
  net: macb: mark device wake capable when "magic-packet" property present
  net: macb: fix wakeup test in runtime suspend/resume routines
  bnxt_en: fix NULL dereference in case SR-IOV configuration fails
  libbpf: Fix libbpf hashmap on (I)LP32 architectures
  net/mlx5e: CT: Fix memory leak in cleanup
  net/mlx5e: Fix port buffers cell size value
  net/mlx5e: Fix 50G per lane indication
  net/mlx5e: Fix CPU mapping after function reload to avoid aRFS RX crash
  net/mlx5e: Fix VXLAN configuration restore after function reload
  net/mlx5e: Fix usage of rcu-protected pointer
  net/mxl5e: Verify that rpriv is not NULL
  net/mlx5: E-Switch, Fix vlan or qos setting in legacy mode
  net/mlx5: Fix eeprom support for SFP module
  cgroup: Fix sock_cgroup_data on big-endian.
  selftests: bpf: Fix detach from sockmap tests
  ...
Merge tag 'kallsyms_show_value-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux 2020-07-09T20:09:30+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-07-09T20:09:30+00:00 ce69fb3b392fbfd6c255aeb0ee371652478c716f Pull kallsyms fix from Kees Cook: "Refactor kallsyms_show_value() users for correct cred. I'm not delighted by the timing of getting these changes to you, but it does fix a handful of kernel address exposures, and no one has screamed yet at the patches. Several users of kallsyms_show_value() were performing checks not during "open". Refactor everything needed to gain proper checks against file->f_cred for modules, kprobes, and bpf" * tag 'kallsyms_show_value-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: selftests: kmod: Add module address visibility test bpf: Check correct cred for CAP_SYSLOG in bpf_dump_raw_ok() kprobes: Do not expose probe addresses to non-CAP_SYSLOG module: Do not expose section addresses to non-CAP_SYSLOG module: Refactor section attr into bin attribute kallsyms: Refactor kallsyms_show_value() to take cred 
Pull kallsyms fix from Kees Cook:
 "Refactor kallsyms_show_value() users for correct cred.

  I'm not delighted by the timing of getting these changes to you, but
  it does fix a handful of kernel address exposures, and no one has
  screamed yet at the patches.

  Several users of kallsyms_show_value() were performing checks not
  during "open". Refactor everything needed to gain proper checks
  against file->f_cred for modules, kprobes, and bpf"

* tag 'kallsyms_show_value-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  selftests: kmod: Add module address visibility test
  bpf: Check correct cred for CAP_SYSLOG in bpf_dump_raw_ok()
  kprobes: Do not expose probe addresses to non-CAP_SYSLOG
  module: Do not expose section addresses to non-CAP_SYSLOG
  module: Refactor section attr into bin attribute
  kallsyms: Refactor kallsyms_show_value() to take cred
bpf: net: Avoid incorrect bpf_sk_reuseport_detach call 2020-07-09T20:03:31+00:00 Martin KaFai Lau kafai@fb.com 2020-07-09T06:11:10+00:00 c9a368f1c0fbe2e3a21ebf231caeae58b18b2681 bpf_sk_reuseport_detach is currently called when sk->sk_user_data is not NULL. It is incorrect because sk->sk_user_data may not be managed by the bpf's reuseport_array. It has been reported in [1] that, the bpf_sk_reuseport_detach() which is called from udp_lib_unhash() has corrupted the sk_user_data managed by l2tp. This patch solves it by using another bit (defined as SK_USER_DATA_BPF) of the sk_user_data pointer value. It marks that a sk_user_data is managed/owned by BPF. The patch depends on a PTRMASK introduced in commit f1ff5ce2cd5e ("net, sk_msg: Clear sk_user_data pointer on clone if tagged"). [ Note: sk->sk_user_data is used by bpf's reuseport_array only when a sk is added to the bpf's reuseport_array. i.e. doing setsockopt(SO_REUSEPORT) and having "sk->sk_reuseport == 1" alone will not stop sk->sk_user_data being used by other means. ] [1]: https://lore.kernel.org/netdev/20200706121259.GA20199@katalix.com/ Fixes: 5dc4c4b7d4e8 ("bpf: Introduce BPF_MAP_TYPE_REUSEPORT_SOCKARRAY") Reported-by: James Chapman <jchapman@katalix.com> Reported-by: syzbot+9f092552ba9a5efca5df@syzkaller.appspotmail.com Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: James Chapman <jchapman@katalix.com> Acked-by: James Chapman <jchapman@katalix.com> Link: https://lore.kernel.org/bpf/20200709061110.4019316-1-kafai@fb.com 
bpf_sk_reuseport_detach is currently called when sk->sk_user_data
is not NULL.  It is incorrect because sk->sk_user_data may not be
managed by the bpf's reuseport_array.  It has been reported in [1] that,
the bpf_sk_reuseport_detach() which is called from udp_lib_unhash() has
corrupted the sk_user_data managed by l2tp.

This patch solves it by using another bit (defined as SK_USER_DATA_BPF)
of the sk_user_data pointer value.  It marks that a sk_user_data is
managed/owned by BPF.

The patch depends on a PTRMASK introduced in
commit f1ff5ce2cd5e ("net, sk_msg: Clear sk_user_data pointer on clone if tagged").

[ Note: sk->sk_user_data is used by bpf's reuseport_array only when a sk is
  added to the bpf's reuseport_array.
  i.e. doing setsockopt(SO_REUSEPORT) and having "sk->sk_reuseport == 1"
  alone will not stop sk->sk_user_data being used by other means. ]

[1]: https://lore.kernel.org/netdev/20200706121259.GA20199@katalix.com/

Fixes: 5dc4c4b7d4e8 ("bpf: Introduce BPF_MAP_TYPE_REUSEPORT_SOCKARRAY")
Reported-by: James Chapman <jchapman@katalix.com>
Reported-by: syzbot+9f092552ba9a5efca5df@syzkaller.appspotmail.com
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: James Chapman <jchapman@katalix.com>
Acked-by: James Chapman <jchapman@katalix.com>
Link: https://lore.kernel.org/bpf/20200709061110.4019316-1-kafai@fb.com
bpf: net: Avoid copying sk_user_data of reuseport_array during sk_clone 2020-07-09T20:03:31+00:00 Martin KaFai Lau kafai@fb.com 2020-07-09T06:11:04+00:00 f3dda7a679df183e798b86e7b6ec05ab35476de3 It makes little sense for copying sk_user_data of reuseport_array during sk_clone_lock(). This patch reuses the SK_USER_DATA_NOCOPY bit introduced in commit f1ff5ce2cd5e ("net, sk_msg: Clear sk_user_data pointer on clone if tagged"). It is used to mark the sk_user_data is not supposed to be copied to its clone. Although the cloned sk's sk_user_data will not be used/freed in bpf_sk_reuseport_detach(), this change can still allow the cloned sk's sk_user_data to be used by some other means. Freeing the reuseport_array's sk_user_data does not require a rcu grace period. Thus, the existing rcu_assign_sk_user_data_nocopy() is not used. Fixes: 5dc4c4b7d4e8 ("bpf: Introduce BPF_MAP_TYPE_REUSEPORT_SOCKARRAY") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20200709061104.4018798-1-kafai@fb.com 
It makes little sense for copying sk_user_data of reuseport_array during
sk_clone_lock().  This patch reuses the SK_USER_DATA_NOCOPY bit introduced in
commit f1ff5ce2cd5e ("net, sk_msg: Clear sk_user_data pointer on clone if tagged").
It is used to mark the sk_user_data is not supposed to be copied to its clone.

Although the cloned sk's sk_user_data will not be used/freed in
bpf_sk_reuseport_detach(), this change can still allow the cloned
sk's sk_user_data to be used by some other means.

Freeing the reuseport_array's sk_user_data does not require a rcu grace
period.  Thus, the existing rcu_assign_sk_user_data_nocopy() is not
used.

Fixes: 5dc4c4b7d4e8 ("bpf: Introduce BPF_MAP_TYPE_REUSEPORT_SOCKARRAY")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20200709061104.4018798-1-kafai@fb.com
bpf: Check correct cred for CAP_SYSLOG in bpf_dump_raw_ok() 2020-07-08T23:01:21+00:00 Kees Cook keescook@chromium.org 2020-07-02T22:45:23+00:00 63960260457a02af2a6cb35d75e6bdb17299c882 When evaluating access control over kallsyms visibility, credentials at open() time need to be used, not the "current" creds (though in BPF's case, this has likely always been the same). Plumb access to associated file->f_cred down through bpf_dump_raw_ok() and its callers now that kallsysm_show_value() has been refactored to take struct cred. Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: bpf@vger.kernel.org Cc: stable@vger.kernel.org Fixes: 7105e828c087 ("bpf: allow for correlation of maps and helpers in dump") Signed-off-by: Kees Cook <keescook@chromium.org> 
When evaluating access control over kallsyms visibility, credentials at
open() time need to be used, not the "current" creds (though in BPF's
case, this has likely always been the same). Plumb access to associated
file->f_cred down through bpf_dump_raw_ok() and its callers now that
kallsysm_show_value() has been refactored to take struct cred.

Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: bpf@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 7105e828c087 ("bpf: allow for correlation of maps and helpers in dump")
Signed-off-by: Kees Cook <keescook@chromium.org>