linux-stable.git/kernel/bpf/helpers.c, branch linux-6.11.y

bpf: Check the validity of nr_words in bpf_iter_bits_new()

2024-11-08T15:30:48+00:00

[ Upstream commit 393397fbdcad7396639d7077c33f86169184ba99 ]

Check the validity of nr_words in bpf_iter_bits_new(). Without this
check, when multiplication overflow occurs for nr_bits (e.g., when
nr_words = 0x0400-0001, nr_bits becomes 64), stack corruption may occur
due to bpf_probe_read_kernel_common(..., nr_bytes = 0x2000-0008).

Fix it by limiting the maximum value of nr_words to 511. The value is
derived from the current implementation of BPF memory allocator. To
ensure compatibility if the BPF memory allocator's size limitation
changes in the future, use the helper bpf_mem_alloc_check_size() to
check whether nr_bytes is too larger. And return -E2BIG instead of
-ENOMEM for oversized nr_bytes.

Fixes: 4665415975b0 ("bpf: Add bits iterator")
Signed-off-by: Hou Tao 
Link: https://lore.kernel.org/r/20241030100516.3633640-4-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov 
Signed-off-by: Sasha Levin

bpf: Free dynamically allocated bits in bpf_iter_bits_destroy()

2024-11-08T15:30:48+00:00

[ Upstream commit 101ccfbabf4738041273ce64e2b116cf440dea13 ]

bpf_iter_bits_destroy() uses "kit->nr_bits <= 64" to check whether the
bits are dynamically allocated. However, the check is incorrect and may
cause a kmemleak as shown below:

unreferenced object 0xffff88812628c8c0 (size 32):
  comm "swapper/0", pid 1, jiffies 4294727320
  hex dump (first 32 bytes):
	b0 c1 55 f5 81 88 ff ff f0 f0 f0 f0 f0 f0 f0 f0  ..U...........
	f0 f0 f0 f0 f0 f0 f0 f0 00 00 00 00 00 00 00 00  ..............
  backtrace (crc 781e32cc):
	[<00000000c452b4ab>] kmemleak_alloc+0x4b/0x80
	[<0000000004e09f80>] __kmalloc_node_noprof+0x480/0x5c0
	[<00000000597124d6>] __alloc.isra.0+0x89/0xb0
	[<000000004ebfffcd>] alloc_bulk+0x2af/0x720
	[<00000000d9c10145>] prefill_mem_cache+0x7f/0xb0
	[<00000000ff9738ff>] bpf_mem_alloc_init+0x3e2/0x610
	[<000000008b616eac>] bpf_global_ma_init+0x19/0x30
	[<00000000fc473efc>] do_one_initcall+0xd3/0x3c0
	[<00000000ec81498c>] kernel_init_freeable+0x66a/0x940
	[<00000000b119f72f>] kernel_init+0x20/0x160
	[<00000000f11ac9a7>] ret_from_fork+0x3c/0x70
	[<0000000004671da4>] ret_from_fork_asm+0x1a/0x30

That is because nr_bits will be set as zero in bpf_iter_bits_next()
after all bits have been iterated.

Fix the issue by setting kit->bit to kit->nr_bits instead of setting
kit->nr_bits to zero when the iteration completes in
bpf_iter_bits_next(). In addition, use "!nr_bits || bits >= nr_bits" to
check whether the iteration is complete and still use "nr_bits > 64" to
indicate whether bits are dynamically allocated. The "!nr_bits" check is
necessary because bpf_iter_bits_new() may fail before setting
kit->nr_bits, and this condition will stop the iteration early instead
of accessing the zeroed or freed kit->bits.

Considering the initial value of kit->bits is -1 and the type of
kit->nr_bits is unsigned int, change the type of kit->nr_bits to int.
The potential overflow problem will be handled in the following patch.

Fixes: 4665415975b0 ("bpf: Add bits iterator")
Acked-by: Yafang Shao 
Signed-off-by: Hou Tao 
Link: https://lore.kernel.org/r/20241030100516.3633640-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov 
Signed-off-by: Sasha Levin

bpf: Add MEM_WRITE attribute

2024-11-01T01:02:36+00:00

[ Upstream commit 6fad274f06f038c29660aa53fbad14241c9fd976 ]

Add a MEM_WRITE attribute for BPF helper functions which can be used in
bpf_func_proto to annotate an argument type in order to let the verifier
know that the helper writes into the memory passed as an argument. In
the past MEM_UNINIT has been (ab)used for this function, but the latter
merely tells the verifier that the passed memory can be uninitialized.

There have been bugs with overloading the latter but aside from that
there are also cases where the passed memory is read + written which
currently cannot be expressed, see also 4b3786a6c539 ("bpf: Zero former
ARG_PTR_TO_{LONG,INT} args in case of error").

Signed-off-by: Daniel Borkmann 
Acked-by: Kumar Kartikeya Dwivedi 
Link: https://lore.kernel.org/r/20241021152809.33343-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov 
Stable-dep-of: 8ea607330a39 ("bpf: Fix overloading of MEM_UNINIT's meaning")
Signed-off-by: Sasha Levin

bpf: Zero former ARG_PTR_TO_{LONG,INT} args in case of error

2024-10-04T14:38:02+00:00

[ Upstream commit 4b3786a6c5397dc220b1483d8e2f4867743e966f ]

For all non-tracing helpers which formerly had ARG_PTR_TO_{LONG,INT} as input
arguments, zero the value for the case of an error as otherwise it could leak
memory. For tracing, it is not needed given CAP_PERFMON can already read all
kernel memory anyway hence bpf_get_func_arg() and bpf_get_func_ret() is skipped
in here.

Also, the MTU helpers mtu_len pointer value is being written but also read.
Technically, the MEM_UNINIT should not be there in order to always force init.
Removing MEM_UNINIT needs more verifier rework though: MEM_UNINIT right now
implies two things actually: i) write into memory, ii) memory does not have
to be initialized. If we lift MEM_UNINIT, it then becomes: i) read into memory,
ii) memory must be initialized. This means that for bpf_*_check_mtu() we're
readding the issue we're trying to fix, that is, it would then be able to
write back into things like .rodata BPF maps. Follow-up work will rework the
MEM_UNINIT semantics such that the intent can be better expressed. For now
just clear the *mtu_len on error path which can be lifted later again.

Fixes: 8a67f2de9b1d ("bpf: expose bpf_strtol and bpf_strtoul to all program types")
Fixes: d7a4cb9b6705 ("bpf: Introduce bpf_strtol and bpf_strtoul helpers")
Signed-off-by: Daniel Borkmann 
Link: https://lore.kernel.org/bpf/e5edd241-59e7-5e39-0ee5-a51e31b6840a@iogearbox.net
Link: https://lore.kernel.org/r/20240913191754.13290-5-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov 
Signed-off-by: Sasha Levin

bpf: Fix helper writes to read-only maps

2024-10-04T14:38:01+00:00

[ Upstream commit 32556ce93bc45c730829083cb60f95a2728ea48b ]

Lonial found an issue that despite user- and BPF-side frozen BPF map
(like in case of .rodata), it was still possible to write into it from
a BPF program side through specific helpers having ARG_PTR_TO_{LONG,INT}
as arguments.

In check_func_arg() when the argument is as mentioned, the meta->raw_mode
is never set. Later, check_helper_mem_access(), under the case of
PTR_TO_MAP_VALUE as register base type, it assumes BPF_READ for the
subsequent call to check_map_access_type() and given the BPF map is
read-only it succeeds.

The helpers really need to be annotated as ARG_PTR_TO_{LONG,INT} | MEM_UNINIT
when results are written into them as opposed to read out of them. The
latter indicates that it's okay to pass a pointer to uninitialized memory
as the memory is written to anyway.

However, ARG_PTR_TO_{LONG,INT} is a special case of ARG_PTR_TO_FIXED_SIZE_MEM
just with additional alignment requirement. So it is better to just get
rid of the ARG_PTR_TO_{LONG,INT} special cases altogether and reuse the
fixed size memory types. For this, add MEM_ALIGNED to additionally ensure
alignment given these helpers write directly into the args via * = val.
The .arg*_size has been initialized reflecting the actual sizeof(*).

MEM_ALIGNED can only be used in combination with MEM_FIXED_SIZE annotated
argument types, since in !MEM_FIXED_SIZE cases the verifier does not know
the buffer size a priori and therefore cannot blindly write * = val.

Fixes: 57c3bb725a3d ("bpf: Introduce ARG_PTR_TO_{INT,LONG} arg types")
Reported-by: Lonial Con 
Signed-off-by: Daniel Borkmann 
Acked-by: Andrii Nakryiko 
Acked-by: Shung-Hsi Yu 
Link: https://lore.kernel.org/r/20240913191754.13290-3-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov 
Signed-off-by: Sasha Levin

bpf: Fix bpf_strtol and bpf_strtoul helpers for 32bit

2024-10-04T14:38:01+00:00

[ Upstream commit cfe69c50b05510b24e26ccb427c7cc70beafd6c1 ]

The bpf_strtol() and bpf_strtoul() helpers are currently broken on 32bit:

The argument type ARG_PTR_TO_LONG is BPF-side "long", not kernel-side "long"
and therefore always considered fixed 64bit no matter if 64 or 32bit underlying
architecture.

This contract breaks in case of the two mentioned helpers since their BPF_CALL
definition for the helpers was added with {unsigned,}long *res. Meaning, the
transition from BPF-side "long" (BPF program) to kernel-side "long" (BPF helper)
breaks here.

Both helpers call __bpf_strtoll() with "long long" correctly, but later assigning
the result into 32-bit "*(long *)" on 32bit architectures. From a BPF program
point of view, this means upper bits will be seen as uninitialised.

Therefore, fix both BPF_CALL signatures to {s,u}64 types to fix this situation.

Now, changing also uapi/bpf.h helper documentation which generates bpf_helper_defs.h
for BPF programs is tricky: Changing signatures there to __{s,u}64 would trigger
compiler warnings (incompatible pointer types passing 'long *' to parameter of type
'__s64 *' (aka 'long long *')) for existing BPF programs.

Leaving the signatures as-is would be fine as from BPF program point of view it is
still BPF-side "long" and thus equivalent to __{s,u}64 on 64 or 32bit underlying
architectures.

Note that bpf_strtol() and bpf_strtoul() are the only helpers with this issue.

Fixes: d7a4cb9b6705 ("bpf: Introduce bpf_strtol and bpf_strtoul helpers")
Reported-by: Alexei Starovoitov 
Signed-off-by: Daniel Borkmann 
Acked-by: Andrii Nakryiko 
Link: https://lore.kernel.org/bpf/481fcec8-c12c-9abb-8ecb-76c71c009959@iogearbox.net
Link: https://lore.kernel.org/r/20240913191754.13290-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov 
Signed-off-by: Sasha Levin

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2024-07-11T19:58:13+00:00

Cross-merge networking fixes after downstream PR.

Conflicts:

net/sched/act_ct.c
  26488172b029 ("net/sched: Fix UAF when resolving a clash")
  3abbd7ed8b76 ("act_ct: prepare for stolen verdict coming from conntrack and nat engine")

No adjacent changes.

Signed-off-by: Jakub Kicinski

bpf: Defer work in bpf_timer_cancel_and_free

2024-07-10T22:59:44+00:00

Currently, the same case as previous patch (two timer callbacks trying
to cancel each other) can be invoked through bpf_map_update_elem as
well, or more precisely, freeing map elements containing timers. Since
this relies on hrtimer_cancel as well, it is prone to the same deadlock
situation as the previous patch.

It would be sufficient to use hrtimer_try_to_cancel to fix this problem,
as the timer cannot be enqueued after async_cancel_and_free. Once
async_cancel_and_free has been done, the timer must be reinitialized
before it can be armed again. The callback running in parallel trying to
arm the timer will fail, and freeing bpf_hrtimer without waiting is
sufficient (given kfree_rcu), and bpf_timer_cb will return
HRTIMER_NORESTART, preventing the timer from being rearmed again.

However, there exists a UAF scenario where the callback arms the timer
before entering this function, such that if cancellation fails (due to
timer callback invoking this routine, or the target timer callback
running concurrently). In such a case, if the timer expiration is
significantly far in the future, the RCU grace period expiration
happening before it will free the bpf_hrtimer state and along with it
the struct hrtimer, that is enqueued.

Hence, it is clear cancellation needs to occur after
async_cancel_and_free, and yet it cannot be done inline due to deadlock
issues. We thus modify bpf_timer_cancel_and_free to defer work to the
global workqueue, adding a work_struct alongside rcu_head (both used at
_different_ points of time, so can share space).

Update existing code comments to reflect the new state of affairs.

Fixes: b00628b1c7d5 ("bpf: Introduce bpf timers.")
Signed-off-by: Kumar Kartikeya Dwivedi 
Link: https://lore.kernel.org/r/20240709185440.1104957-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov

bpf: Fail bpf_timer_cancel when callback is being cancelled

2024-07-10T22:59:44+00:00

Given a schedule:

timer1 cb			timer2 cb

bpf_timer_cancel(timer2);	bpf_timer_cancel(timer1);

Both bpf_timer_cancel calls would wait for the other callback to finish
executing, introducing a lockup.

Add an atomic_t count named 'cancelling' in bpf_hrtimer. This keeps
track of all in-flight cancellation requests for a given BPF timer.
Whenever cancelling a BPF timer, we must check if we have outstanding
cancellation requests, and if so, we must fail the operation with an
error (-EDEADLK) since cancellation is synchronous and waits for the
callback to finish executing. This implies that we can enter a deadlock
situation involving two or more timer callbacks executing in parallel
and attempting to cancel one another.

Note that we avoid incrementing the cancelling counter for the target
timer (the one being cancelled) if bpf_timer_cancel is not invoked from
a callback, to avoid spurious errors. The whole point of detecting
cur->cancelling and returning -EDEADLK is to not enter a busy wait loop
(which may or may not lead to a lockup). This does not apply in case the
caller is in a non-callback context, the other side can continue to
cancel as it sees fit without running into errors.

Background on prior attempts:

Earlier versions of this patch used a bool 'cancelling' bit and used the
following pattern under timer->lock to publish cancellation status.

lock(t->lock);
t->cancelling = true;
mb();
if (cur->cancelling)
	return -EDEADLK;
unlock(t->lock);
hrtimer_cancel(t->timer);
t->cancelling = false;

The store outside the critical section could overwrite a parallel
requests t->cancelling assignment to true, to ensure the parallely
executing callback observes its cancellation status.

It would be necessary to clear this cancelling bit once hrtimer_cancel
is done, but lack of serialization introduced races. Another option was
explored where bpf_timer_start would clear the bit when (re)starting the
timer under timer->lock. This would ensure serialized access to the
cancelling bit, but may allow it to be cleared before in-flight
hrtimer_cancel has finished executing, such that lockups can occur
again.

Thus, we choose an atomic counter to keep track of all outstanding
cancellation requests and use it to prevent lockups in case callbacks
attempt to cancel each other while executing in parallel.

Reported-by: Dohyun Kim 
Reported-by: Neel Natu 
Fixes: b00628b1c7d5 ("bpf: Introduce bpf timers.")
Signed-off-by: Kumar Kartikeya Dwivedi 
Link: https://lore.kernel.org/r/20240709185440.1104957-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov

bpf: helpers: fix bpf_wq_set_callback_impl signature

2024-07-08T17:01:48+00:00

I realized this while having a map containing both a struct bpf_timer and
a struct bpf_wq: the third argument provided to the bpf_wq callback is
not the struct bpf_wq pointer itself, but the pointer to the value in
the map.

Which means that the users need to double cast the provided "value" as
this is not a struct bpf_wq *.

This is a change of API, but there doesn't seem to be much users of bpf_wq
right now, so we should be able to go with this right now.

Fixes: 81f1d7a583fa ("bpf: wq: add bpf_wq_set_callback_impl")
Signed-off-by: Benjamin Tissoires 
Link: https://lore.kernel.org/r/20240708-fix-wq-v2-1-667e5c9fbd99@kernel.org
Signed-off-by: Alexei Starovoitov