[ Upstream commit caff1fa4118cec4dfd4336521ebd22a6408a1e3e ]

I think there is something wrong with BPF_PROBE_MEM in ___bpf_prog_run()
in big-endian machine. Let's make a test and see what will happen if we
want to load a 'u16' with BPF_PROBE_MEM.

Let's make the src value '0x0001', the value of dest register will become
0x0001000000000000, as the value will be loaded to the first 2 byte of
DST with following code:

  bpf_probe_read_kernel(&DST, SIZE, (const void *)(long) (SRC + insn->off));

Obviously, the value in DST is not correct. In fact, we can compare
BPF_PROBE_MEM with LDX_MEM_H:

  DST = *(SIZE *)(unsigned long) (SRC + insn->off);

If the memory load is done by LDX_MEM_H, the value in DST will be 0x1 now.

And I think this error results in the test case 'test_bpf_sk_storage_map'
failing:

  test_bpf_sk_storage_map:PASS:bpf_iter_bpf_sk_storage_map__open_and_load 0 nsec
  test_bpf_sk_storage_map:PASS:socket 0 nsec
  test_bpf_sk_storage_map:PASS:map_update 0 nsec
  test_bpf_sk_storage_map:PASS:socket 0 nsec
  test_bpf_sk_storage_map:PASS:map_update 0 nsec
  test_bpf_sk_storage_map:PASS:socket 0 nsec
  test_bpf_sk_storage_map:PASS:map_update 0 nsec
  test_bpf_sk_storage_map:PASS:attach_iter 0 nsec
  test_bpf_sk_storage_map:PASS:create_iter 0 nsec
  test_bpf_sk_storage_map:PASS:read 0 nsec
  test_bpf_sk_storage_map:FAIL:ipv6_sk_count got 0 expected 3
  $10/26 bpf_iter/bpf_sk_storage_map:FAIL

The code of the test case is simply, it will load sk->sk_family to the
register with BPF_PROBE_MEM and check if it is AF_INET6. With this patch,
now the test case 'bpf_iter' can pass:

  $10  bpf_iter:OK

Fixes: 2a02759ef5f8 ("bpf: Add support for BTF pointers to interpreter")
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20220524021228.533216-1-imagedong@tencent.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 4b6313cf99b0d51b49aeaea98ec76ca8161ecb80 upstream.

The combination of jit blinding and pointers to bpf subprogs causes:
[   36.989548] BUG: unable to handle page fault for address: 0000000100000001
[   36.990342] #PF: supervisor instruction fetch in kernel mode
[   36.990968] #PF: error_code(0x0010) - not-present page
[   36.994859] RIP: 0010:0x100000001
[   36.995209] Code: Unable to access opcode bytes at RIP 0xffffffd7.
[   37.004091] Call Trace:
[   37.004351]  <TASK>
[   37.004576]  ? bpf_loop+0x4d/0x70
[   37.004932]  ? bpf_prog_3899083f75e4c5de_F+0xe3/0x13b

The jit blinding logic didn't recognize that ld_imm64 with an address
of bpf subprogram is a special instruction and proceeded to randomize it.
By itself it wouldn't have been an issue, but jit_subprogs() logic
relies on two step process to JIT all subprogs and then JIT them
again when addresses of all subprogs are known.
Blinding process in the first JIT phase caused second JIT to miss
adjustment of special ld_imm64.

Fix this issue by ignoring special ld_imm64 instructions that don't have
user controlled constants and shouldn't be blinded.

Fixes: 69c087ba6225 ("bpf: Add bpf_for_each_map_elem() helper")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220513011025.13344-1-alexei.starovoitov@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The eBPF name has completely taken over from eBPF in general usage for
the actual eBPF representation, or BPF for any general in-kernel use.
Prune all remaining references to "internal BPF".

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211119163215.971383-4-hch@lst.de

The comment telling that the prog_free helper is freeing the program is
not exactly useful, so just remove it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211119163215.971383-3-hch@lst.de

In the current code, the actual max tail call count is 33 which is greater
than MAX_TAIL_CALL_CNT (defined as 32). The actual limit is not consistent
with the meaning of MAX_TAIL_CALL_CNT and thus confusing at first glance.
We can see the historical evolution from commit 04fd61ab36ec ("bpf: allow
bpf programs to tail-call other bpf programs") and commit f9dabe016b63
("bpf: Undo off-by-one in interpreter tail call count limit"). In order
to avoid changing existing behavior, the actual limit is 33 now, this is
reasonable.

After commit 874be05f525e ("bpf, tests: Add tail call test suite"), we can
see there exists failed testcase.

On all archs when CONFIG_BPF_JIT_ALWAYS_ON is not set:
 # echo 0 > /proc/sys/net/core/bpf_jit_enable
 # modprobe test_bpf
 # dmesg | grep -w FAIL
 Tail call error path, max count reached jited:0 ret 34 != 33 FAIL

On some archs:
 # echo 1 > /proc/sys/net/core/bpf_jit_enable
 # modprobe test_bpf
 # dmesg | grep -w FAIL
 Tail call error path, max count reached jited:1 ret 34 != 33 FAIL

Although the above failed testcase has been fixed in commit 18935a72eb25
("bpf/tests: Fix error in tail call limit tests"), it would still be good
to change the value of MAX_TAIL_CALL_CNT from 32 to 33 to make the code
more readable.

The 32-bit x86 JIT was using a limit of 32, just fix the wrong comments and
limit to 33 tail calls as the constant MAX_TAIL_CALL_CNT updated. For the
mips64 JIT, use "ori" instead of "addiu" as suggested by Johan Almbladh.
For the riscv JIT, use RV_REG_TCC directly to save one register move as
suggested by Björn Töpel. For the other implementations, no function changes,
it does not change the current limit 33, the new value of MAX_TAIL_CALL_CNT
can reflect the actual max tail call count, the related tail call testcases
in test_bpf module and selftests can work well for the interpreter and the
JIT.

Here are the test results on x86_64:

 # uname -m
 x86_64
 # echo 0 > /proc/sys/net/core/bpf_jit_enable
 # modprobe test_bpf test_suite=test_tail_calls
 # dmesg | tail -1
 test_bpf: test_tail_calls: Summary: 8 PASSED, 0 FAILED, [0/8 JIT'ed]
 # rmmod test_bpf
 # echo 1 > /proc/sys/net/core/bpf_jit_enable
 # modprobe test_bpf test_suite=test_tail_calls
 # dmesg | tail -1
 test_bpf: test_tail_calls: Summary: 8 PASSED, 0 FAILED, [8/8 JIT'ed]
 # rmmod test_bpf
 # ./test_progs -t tailcalls
 #142 tailcalls:OK
 Summary: 1/11 PASSED, 0 SKIPPED, 0 FAILED

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/bpf/1636075800-3264-1-git-send-email-yangtiezhu@loongson.cn

This patch is to fix an out-of-bound access issue when jit-ing the
bpf_pseudo_func insn (i.e. ld_imm64 with src_reg == BPF_PSEUDO_FUNC)

In jit_subprog(), it currently reuses the subprog index cached in
insn[1].imm.  This subprog index is an index into a few array related
to subprogs.  For example, in jit_subprog(), it is an index to the newly
allocated 'struct bpf_prog **func' array.

The subprog index was cached in insn[1].imm after add_subprog().  However,
this could become outdated (and too big in this case) if some subprogs
are completely removed during dead code elimination (in
adjust_subprog_starts_after_remove).  The cached index in insn[1].imm
is not updated accordingly and causing out-of-bound issue in the later
jit_subprog().

Unlike bpf_pseudo_'func' insn, the current bpf_pseudo_'call' insn
is handling the DCE properly by calling find_subprog(insn->imm) to
figure out the index instead of caching the subprog index.
The existing bpf_adj_branches() will adjust the insn->imm
whenever insn is added or removed.

Instead of having two ways handling subprog index,
this patch is to make bpf_pseudo_func works more like
bpf_pseudo_call.

First change is to stop caching the subprog index result
in insn[1].imm after add_subprog().  The verification
process will use find_subprog(insn->imm) to figure
out the subprog index.

Second change is in bpf_adj_branches() and have it to
adjust the insn->imm for the bpf_pseudo_func insn also
whenever insn is added or removed.

Third change is in jit_subprog().  Like the bpf_pseudo_call handling,
bpf_pseudo_func temporarily stores the find_subprog() result
in insn->off.  It is fine because the prog's insn has been finalized
at this point.  insn->off will be reset back to 0 later to avoid
confusing the userspace prog dump tool.

Fixes: 69c087ba6225 ("bpf: Add bpf_for_each_map_elem() helper")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211106014014.651018-1-kafai@fb.com

Alexei Starovoitov says:

====================
pull-request: bpf-next 2021-11-01

We've added 181 non-merge commits during the last 28 day(s) which contain
a total of 280 files changed, 11791 insertions(+), 5879 deletions(-).

The main changes are:

1) Fix bpf verifier propagation of 64-bit bounds, from Alexei.

2) Parallelize bpf test_progs, from Yucong and Andrii.

3) Deprecate various libbpf apis including af_xdp, from Andrii, Hengqi, Magnus.

4) Improve bpf selftests on s390, from Ilya.

5) bloomfilter bpf map type, from Joanne.

6) Big improvements to JIT tests especially on Mips, from Johan.

7) Support kernel module function calls from bpf, from Kumar.

8) Support typeless and weak ksym in light skeleton, from Kumar.

9) Disallow unprivileged bpf by default, from Pawan.

10) BTF_KIND_DECL_TAG support, from Yonghong.

11) Various bpftool cleanups, from Quentin.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (181 commits)
  libbpf: Deprecate AF_XDP support
  kbuild: Unify options for BTF generation for vmlinux and modules
  selftests/bpf: Add a testcase for 64-bit bounds propagation issue.
  bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit.
  bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off.
  selftests/bpf: Fix also no-alu32 strobemeta selftest
  bpf: Add missing map_delete_elem method to bloom filter map
  selftests/bpf: Add bloom map success test for userspace calls
  bpf: Add alignment padding for "map_extra" + consolidate holes
  bpf: Bloom filter map naming fixups
  selftests/bpf: Add test cases for struct_ops prog
  bpf: Add dummy BPF STRUCT_OPS for test purpose
  bpf: Factor out helpers for ctx access checking
  bpf: Factor out a helper to prepare trampoline for struct_ops prog
  selftests, bpf: Fix broken riscv build
  riscv, libbpf: Add RISC-V (RV64) support to bpf_tracing.h
  tools, build: Add RISC-V to HOSTARCH parsing
  riscv, bpf: Increase the maximum number of iterations
  selftests, bpf: Add one test for sockmap with strparser
  selftests, bpf: Fix test_txmsg_ingress_parser error
  ...
====================

Link: https://lore.kernel.org/r/20211102013123.9005-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

include/net/sock.h
  7b50ecfcc6cd ("net: Rename ->stream_memory_read to ->sock_is_readable")
  4c1e34c0dbff ("vsock: Enable y2038 safe timeval for timeout")

drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c
  0daa55d033b0 ("octeontx2-af: cn10k: debugfs for dumping LMTST map table")
  e77bcdd1f639 ("octeontx2-af: Display all enabled PF VF rsrc_alloc entries.")

Adjacent code addition in both cases, keep both.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Lorenzo noticed that the code testing for program type compatibility of
tail call maps is potentially racy in that two threads could encounter a
map with an unset type simultaneously and both return true even though they
are inserting incompatible programs.

The race window is quite small, but artificially enlarging it by adding a
usleep_range() inside the check in bpf_prog_array_compatible() makes it
trivial to trigger from userspace with a program that does, essentially:

        map_fd = bpf_create_map(BPF_MAP_TYPE_PROG_ARRAY, 4, 4, 2, 0);
        pid = fork();
        if (pid) {
                key = 0;
                value = xdp_fd;
        } else {
                key = 1;
                value = tc_fd;
        }
        err = bpf_map_update_elem(map_fd, &key, &value, 0);

While the race window is small, it has potentially serious ramifications in
that triggering it would allow a BPF program to tail call to a program of a
different type. So let's get rid of it by protecting the update with a
spinlock. The commit in the Fixes tag is the last commit that touches the
code in question.

v2:
- Use a spinlock instead of an atomic variable and cmpxchg() (Alexei)
v3:
- Put lock and the members it protects into an embedded 'owner' struct (Daniel)

Fixes: 3324b584b6f6 ("ebpf: misc core cleanup")
Reported-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211026110019.363464-1-toke@redhat.com

Restrict bpf_jit_limit to the maximum supported by the arch's JIT.

Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211014142554.53120-4-lmb@cloudflare.com