linux-stable.git/init/main.c, branch v4.12.2

Merge tag 'tty-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2017-05-09T01:49:23+00:00

Pull tty/serial updates from Greg KH:
 "Here is the "big" TTY/Serial patch updates for 4.12-rc1

  Not a lot of new things here, the normal number of serial driver
  updates and additions, tiny bugs fixed, and some core files split up
  to make future changes a bit easier for Nicolas's "tiny-tty" work.

  All of these have been in linux-next for a while"

* tag 'tty-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (62 commits)
  serial: small Makefile reordering
  tty: split job control support into a file of its own
  tty: move baudrate handling code to a file of its own
  console: move console_init() out of tty_io.c
  serial: 8250_early: Add earlycon support for Palmchip UART
  tty: pl011: use "qdf2400_e44" as the earlycon name for QDF2400 E44
  vt: make mouse selection of non-ASCII consistent
  vt: set mouse selection word-chars to gpm's default
  imx-serial: Reduce RX DMA startup latency when opening for reading
  serial: omap: suspend device on probe errors
  serial: omap: fix runtime-pm handling on unbind
  tty: serial: omap: add UPF_BOOT_AUTOCONF flag for DT init
  serial: samsung: Remove useless spinlock
  serial: samsung: Add missing checks for dma_map_single failure
  serial: samsung: Use right device for DMA-mapping calls
  serial: imx: setup DCEDTE early and ensure DCD and RI irqs to be off
  tty: fix comment typo s/repsonsible/responsible/
  tty: amba-pl011: Fix spurious TX interrupts
  serial: xuartps: Enable clocks in the pm disable case also
  serial: core: Re-use struct uart_port {name} field
  ...

Merge tag 'trace-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

2017-05-04T01:41:21+00:00

Pull tracing updates from Steven Rostedt:
 "New features for this release:

   - Pretty much a full rewrite of the processing of function plugins.
     i.e. echo do_IRQ:stacktrace > set_ftrace_filter

   - The rewrite was needed to add plugins to be unique to tracing
     instances. i.e. mkdir instance/foo; cd instances/foo; echo
     do_IRQ:stacktrace > set_ftrace_filter The old way was written very
     hacky. This removes a lot of those hacks.

   - New "function-fork" tracing option. When set, pids in the
     set_ftrace_pid will have their children added when the processes
     with their pids listed in the set_ftrace_pid file forks.

   - Exposure of "maxactive" for kretprobe in kprobe_events

   - Allow for builtin init functions to be traced by the function
     tracer (via the kernel command line). Module init function tracing
     will come in the next release.

   - Added more selftests, and have selftests also test in an instance"

* tag 'trace-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (60 commits)
  ring-buffer: Return reader page back into existing ring buffer
  selftests: ftrace: Allow some event trigger tests to run in an instance
  selftests: ftrace: Have some basic tests run in a tracing instance too
  selftests: ftrace: Have event tests also run in an tracing instance
  selftests: ftrace: Make func_event_triggers and func_traceonoff_triggers tests do instances
  selftests: ftrace: Allow some tests to be run in a tracing instance
  tracing/ftrace: Allow for instances to trigger their own stacktrace probes
  tracing/ftrace: Allow for the traceonoff probe be unique to instances
  tracing/ftrace: Enable snapshot function trigger to work with instances
  tracing/ftrace: Allow instances to have their own function probes
  tracing/ftrace: Add a better way to pass data via the probe functions
  ftrace: Dynamically create the probe ftrace_ops for the trace_array
  tracing: Pass the trace_array into ftrace_probe_ops functions
  tracing: Have the trace_array hold the list of registered func probes
  ftrace: If the hash for a probe fails to update then free what was initialized
  ftrace: Have the function probes call their own function
  ftrace: Have each function probe use its own ftrace_ops
  ftrace: Have unregister_ftrace_function_probe_func() return a value
  ftrace: Add helper function ftrace_hash_move_and_update_ops()
  ftrace: Remove data field from ftrace_func_probe structure
  ...

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

2017-05-03T02:09:35+00:00

Pull trivial tree updates from Jiri Kosina.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  tty: fix comment for __tty_alloc_driver()
  init/main: properly align the multi-line comment
  init/main: Fix double "the" in comment
  Fix dead URLs to ftp.kernel.org
  drivers: Clean up duplicated email address
  treewide: Fix typo in xml/driver-api/basics.xml
  tools/testing/selftests/powerpc: remove redundant CFLAGS in Makefile: "-Wall -O2 -Wall" -> "-O2 -Wall"
  selftests/timers: Spelling s/privledges/privileges/
  HID: picoLCD: Spelling s/REPORT_WRTIE_MEMORY/REPORT_WRITE_MEMORY/
  net: phy: dp83848: Fix Typo
  UBI: Fix typos
  Documentation: ftrace.txt: Correct nice value of 120 priority
  net: fec: Fix typo in error msg and comment
  treewide: Fix typos in printk

init/main: properly align the multi-line comment

2017-04-24T11:14:21+00:00

Add a tab before it to follow standard practices. Also add the missing
full stop '.'.

Signed-off-by: Viresh Kumar 
Signed-off-by: Jiri Kosina

init/main: Fix double "the" in comment

2017-04-24T11:14:21+00:00

s/the\ the/the

Signed-off-by: Viresh Kumar 
Signed-off-by: Jiri Kosina

console: move console_init() out of tty_io.c

2017-04-18T16:01:52+00:00

All the console driver handling code lives in printk.c.
Move console_init() there as well so console support can still be used
when the TTY code is configured out. No logical changes from this patch.

Signed-off-by: Nicolas Pitre 
Signed-off-by: Greg Kroah-Hartman

ftrace: Have init/main.c call ftrace directly to free init memory

2017-04-03T18:04:00+00:00

Relying on free_reserved_area() to call ftrace to free init memory proved to
not be sufficient. The issue is that on x86, when debug_pagealloc is
enabled, the init memory is not freed, but simply set as not present. Since
ftrace was uninformed of this, starting function tracing still tries to
update pages that are not present according to the page tables, causing
ftrace to bug, as well as killing the kernel itself.

Instead of relying on free_reserved_area(), have init/main.c call ftrace
directly just before it frees the init memory. Then it needs to use
__init_begin and __init_end to know where the init memory location is.
Looking at all archs (and testing what I can), it appears that this should
work for each of them.

Reported-by: kernel test robot 
Reported-by: Fengguang Wu 
Signed-off-by: Steven Rostedt (VMware)

mm: move mm_percpu_wq initialization earlier

2017-04-01T00:13:30+00:00

Yang Li has reported that drain_all_pages triggers a WARN_ON which means
that this function is called earlier than the mm_percpu_wq is
initialized on arm64 with CMA configured:

  WARNING: CPU: 2 PID: 1 at mm/page_alloc.c:2423 drain_all_pages+0x244/0x25c
  Modules linked in:
  CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.11.0-rc1-next-20170310-00027-g64dfbc5 #127
  Hardware name: Freescale Layerscape 2088A RDB Board (DT)
  task: ffffffc07c4a6d00 task.stack: ffffffc07c4a8000
  PC is at drain_all_pages+0x244/0x25c
  LR is at start_isolate_page_range+0x14c/0x1f0
  [...]
   drain_all_pages+0x244/0x25c
   start_isolate_page_range+0x14c/0x1f0
   alloc_contig_range+0xec/0x354
   cma_alloc+0x100/0x1fc
   dma_alloc_from_contiguous+0x3c/0x44
   atomic_pool_init+0x7c/0x208
   arm64_dma_init+0x44/0x4c
   do_one_initcall+0x38/0x128
   kernel_init_freeable+0x1a0/0x240
   kernel_init+0x10/0xfc
   ret_from_fork+0x10/0x20

Fix this by moving the whole setup_vmstat which is an initcall right now
to init_mm_internals which will be called right after the WQ subsystem
is initialized.

Link: http://lkml.kernel.org/r/20170315164021.28532-1-mhocko@kernel.org
Signed-off-by: Michal Hocko 
Reported-by: Yang Li 
Tested-by: Yang Li 
Tested-by: Xiaolong Ye 
Cc: Mel Gorman 
Cc: Vlastimil Babka 
Cc: Tetsuo Handa 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

ftrace: Move ftrace_init() to right after memory initialization

2017-03-24T17:08:44+00:00

Initialize the ftrace records immediately after memory initialization, as
that is all that is required for the records to be created. This will allow
for future work to get function tracing started earlier in the boot process.

Signed-off-by: Steven Rostedt (VMware)

tracing: Split tracing initialization into two for early initialization

2017-03-24T17:08:43+00:00

Create an early_trace_init() function that will initialize the buffers and
allow for ealier use of trace_printk(). This will also allow for future work
to have function tracing start earlier at boot up.

Signed-off-by: Steven Rostedt (VMware)