linux-stable.git/include, branch v6.6.9

9p: prevent read overrun in protocol dump tracepoint

2024-01-01T12:42:43+00:00

commit a931c6816078af3e306e0f444f492396ce40de31 upstream.

An out of bounds read can occur within the tracepoint 9p_protocol_dump. In
the fast assign, there is a memcpy that uses a constant size of 32 (macro
named P9_PROTO_DUMP_SZ). When the copy is invoked, the source buffer is not
guaranteed match this size.  It was found that in some cases the source
buffer size is less than 32, resulting in a read that overruns.

The size of the source buffer seems to be known at the time of the
tracepoint being invoked. The allocations happen within p9_fcall_init(),
where the capacity field is set to the allocated size of the payload
buffer. This patch tries to fix the overrun by changing the fixed array to
a dynamically sized array and using the minimum of the capacity value or
P9_PROTO_DUMP_SZ as its length. The trace log statement is adjusted to
account for this. Note that the trace log no longer splits the payload on
the first 16 bytes. The full payload is now logged to a single line.

To repro the orignal problem, operations to a plan 9 managed resource can
be used. The simplest approach might just be mounting a shared filesystem
(between host and guest vm) using the plan 9 protocol while the tracepoint
is enabled.

mount -t 9p -o trans=virtio  

The bpftrace program below can be used to show the out of bounds read.
Note that a recent version of bpftrace is needed for the raw tracepoint
support. The script was tested using v0.19.0.

/* from include/net/9p/9p.h */
struct p9_fcall {
    u32 size;
    u8 id;
    u16 tag;
    size_t offset;
    size_t capacity;
    struct kmem_cache *cache;
    u8 *sdata;
    bool zc;
};

tracepoint:9p:9p_protocol_dump
{
    /* out of bounds read can happen when this tracepoint is enabled */
}

rawtracepoint:9p_protocol_dump
{
    $pdu = (struct p9_fcall *)arg1;
    $dump_sz = (uint64)32;

    if ($dump_sz > $pdu->capacity) {
        printf("reading %zu bytes from src buffer of %zu bytes\n",
            $dump_sz, $pdu->capacity);
    }
}

Signed-off-by: JP Kobryn 
Message-ID: <20231204202321.22730-1-inwardvessel@gmail.com>
Fixes: 60ece0833b6c ("net/9p: allocate appropriate reduced message buffers")
Cc: stable@vger.kernel.org
Reviewed-by: Christian Schoenebeck 
Signed-off-by: Dominique Martinet 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE

2024-01-01T12:42:40+00:00

commit 59b047bc98084f8af2c41483e4d68a5adf2fa7f7 upstream.

If two Bluetooth devices both support BR/EDR and BLE, and also
support Secure Connections, then they only need to pair once.
The LTK generated during the LE pairing process may be converted
into a BR/EDR link key for BR/EDR transport, and conversely, a
link key generated during the BR/EDR SSP pairing process can be
converted into an LTK for LE transport. Hence, the link type of
the link key and LTK is not fixed, they can be either an LE LINK
or an ACL LINK.

Currently, in the mgmt_new_irk/ltk/crsk/link_key functions, the
link type is fixed, which could lead to incorrect address types
being reported to the application layer. Therefore, it is necessary
to add link_type/addr_type to the smp_irk/ltk/crsk and link_key,
to ensure the generation of the correct address type.

SMP over BREDR:
Before Fix:
> ACL Data RX: Handle 11 flags 0x02 dlen 12
        BR/EDR SMP: Identity Address Information (0x09) len 7
        Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
        Random address: 00:00:00:00:00:00 (Non-Resolvable)
        LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
        LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
        Key type: Authenticated key from P-256 (0x03)

After Fix:
> ACL Data RX: Handle 11 flags 0x02 dlen 12
      BR/EDR SMP: Identity Address Information (0x09) len 7
        Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
        Random address: 00:00:00:00:00:00 (Non-Resolvable)
        BR/EDR Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
        BR/EDR Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
        Key type: Authenticated key from P-256 (0x03)

SMP over LE:
Before Fix:
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
        Random address: 5F:5C:07:37:47:D5 (Resolvable)
        LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
        LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
        Key type: Authenticated key from P-256 (0x03)
@ MGMT Event: New Link Key (0x0009) plen 26
        BR/EDR Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
        Key type: Authenticated Combination key from P-256 (0x08)

After Fix:
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
        Random address: 5E:03:1C:00:38:21 (Resolvable)
        LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
        LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
        Key type: Authenticated key from P-256 (0x03)
@ MGMT Event: New Link Key (0x0009) plen 26
        Store hint: Yes (0x01)
        LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
        Key type: Authenticated Combination key from P-256 (0x08)

Cc: stable@vger.kernel.org
Signed-off-by: Xiao Yao 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Greg Kroah-Hartman

keys, dns: Allow key types (eg. DNS) to be reclaimed immediately on expiry

2024-01-01T12:42:33+00:00

[ Upstream commit 39299bdd2546688d92ed9db4948f6219ca1b9542 ]

If a key has an expiration time, then when that time passes, the key is
left around for a certain amount of time before being collected (5 mins by
default) so that EKEYEXPIRED can be returned instead of ENOKEY.  This is a
problem for DNS keys because we want to redo the DNS lookup immediately at
that point.

Fix this by allowing key types to be marked such that keys of that type
don't have this extra period, but are reclaimed as soon as they expire and
turn this on for dns_resolver-type keys.  To make this easier to handle,
key->expiry is changed to be permanent if TIME64_MAX rather than 0.

Furthermore, give such new-style negative DNS results a 1s default expiry
if no other expiry time is set rather than allowing it to stick around
indefinitely.  This shouldn't be zero as ls will follow a failing stat call
immediately with a second with AT_SYMLINK_NOFOLLOW added.

Fixes: 1a4240f4764a ("DNS: Separate out CIFS DNS Resolver code")
Signed-off-by: David Howells 
Tested-by: Markus Suvanto 
cc: Wang Lei 
cc: Jeff Layton 
cc: Steve French 
cc: Marc Dionne 
cc: Jarkko Sakkinen 
cc: "David S. Miller" 
cc: Eric Dumazet 
cc: Jakub Kicinski 
cc: Paolo Abeni 
cc: linux-afs@lists.infradead.org
cc: linux-cifs@vger.kernel.org
cc: linux-nfs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: keyrings@vger.kernel.org
cc: netdev@vger.kernel.org
Signed-off-by: Sasha Levin

net/ipv6: Revert remove expired routes with a separated list of routes

2024-01-01T12:42:33+00:00

[ Upstream commit dade3f6a1e4e35a5ae916d5e78b3229ec34c78ec ]

This reverts commit 3dec89b14d37ee635e772636dad3f09f78f1ab87.

The commit has some race conditions given how expires is managed on a
fib6_info in relation to gc start, adding the entry to the gc list and
setting the timer value leading to UAF. Revert the commit and try again
in a later release.

Fixes: 3dec89b14d37 ("net/ipv6: Remove expired routes with a separated list of routes")
Cc: Kui-Feng Lee 
Signed-off-by: David Ahern 
Reviewed-by: Eric Dumazet 
Link: https://lore.kernel.org/r/20231219030243.25687-1-dsahern@kernel.org
Signed-off-by: Paolo Abeni 
Signed-off-by: Sasha Levin

Bluetooth: hci_core: Fix hci_conn_hash_lookup_cis

2024-01-01T12:42:31+00:00

[ Upstream commit 50efc63d1a7a7b9a6ed21adae1b9a7123ec8abc0 ]

hci_conn_hash_lookup_cis shall always match the requested CIG and CIS
ids even when they are unset as otherwise it result in not being able
to bind/connect different sockets to the same address as that would
result in having multiple sockets mapping to the same hci_conn which
doesn't really work and prevents BAP audio configuration such as
AC 6(i) when CIG and CIS are left unset.

Fixes: c14516faede3 ("Bluetooth: hci_conn: Fix not matching by CIS ID")
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Sasha Levin

bpf: syzkaller found null ptr deref in unix_bpf proto add

2024-01-01T12:42:28+00:00

[ Upstream commit 8d6650646ce49e9a5b8c5c23eb94f74b1749f70f ]

I added logic to track the sock pair for stream_unix sockets so that we
ensure lifetime of the sock matches the time a sockmap could reference
the sock (see fixes tag). I forgot though that we allow af_unix unconnected
sockets into a sock{map|hash} map.

This is problematic because previous fixed expected sk_pair() to exist
and did not NULL check it. Because unconnected sockets have a NULL
sk_pair this resulted in the NULL ptr dereference found by syzkaller.

BUG: KASAN: null-ptr-deref in unix_stream_bpf_update_proto+0x72/0x430 net/unix/unix_bpf.c:171
Write of size 4 at addr 0000000000000080 by task syz-executor360/5073
Call Trace:
 
 ...
 sock_hold include/net/sock.h:777 [inline]
 unix_stream_bpf_update_proto+0x72/0x430 net/unix/unix_bpf.c:171
 sock_map_init_proto net/core/sock_map.c:190 [inline]
 sock_map_link+0xb87/0x1100 net/core/sock_map.c:294
 sock_map_update_common+0xf6/0x870 net/core/sock_map.c:483
 sock_map_update_elem_sys+0x5b6/0x640 net/core/sock_map.c:577
 bpf_map_update_value+0x3af/0x820 kernel/bpf/syscall.c:167

We considered just checking for the null ptr and skipping taking a ref
on the NULL peer sock. But, if the socket is then connected() after
being added to the sockmap we can cause the original issue again. So
instead this patch blocks adding af_unix sockets that are not in the
ESTABLISHED state.

Reported-by: Eric Dumazet 
Reported-by: syzbot+e8030702aefd3444fb9e@syzkaller.appspotmail.com
Fixes: 8866730aed51 ("bpf, sockmap: af_unix stream sockets need to hold ref for pair sock")
Acked-by: Jakub Sitnicki 
Signed-off-by: John Fastabend 
Link: https://lore.kernel.org/r/20231201180139.328529-2-john.fastabend@gmail.com
Signed-off-by: Martin KaFai Lau 
Signed-off-by: Sasha Levin

wifi: ieee80211: don't require protected vendor action frames

2024-01-01T12:42:26+00:00

[ Upstream commit 98fb9b9680c9f3895ced02d6a73e27f5d7b5892b ]

For vendor action frames, whether a protected one should be
used or not is clearly up to the individual vendor and frame,
so even though a protected dual is defined, it may not get
used. Thus, don't require protection for vendor action frames
when they're used in a connection.

Since we obviously don't process frames unknown to the kernel
in the kernel, it may makes sense to invert this list to have
all the ones the kernel processes and knows to be requiring
protection, but that'd be a different change.

Fixes: 91535613b609 ("wifi: mac80211: don't drop all unprotected public action frames")
Reported-by: Jouni Malinen 
Link: https://msgid.link/20231206223801.f6a2cf4e67ec.Ifa6acc774bd67801d3dafb405278f297683187aa@changeid
Signed-off-by: Johannes Berg 
Signed-off-by: Sasha Levin

drm: Update file owner during use

2024-01-01T12:42:25+00:00

[ Upstream commit 1c7a387ffef894b1ab3942f0482dac7a6e0a909c ]

With the typical model where the display server opens the file descriptor
and then hands it over to the client(*), we were showing stale data in
debugfs.

Fix it by updating the drm_file->pid on ioctl access from a different
process.

The field is also made RCU protected to allow for lockless readers. Update
side is protected with dev->filelist_mutex.

Before:

$ cat /sys/kernel/debug/dri/0/clients
             command   pid dev master a   uid      magic
                Xorg  2344   0   y    y     0          0
                Xorg  2344   0   n    y     0          2
                Xorg  2344   0   n    y     0          3
                Xorg  2344   0   n    y     0          4

After:

$ cat /sys/kernel/debug/dri/0/clients
             command  tgid dev master a   uid      magic
                Xorg   830   0   y    y     0          0
       xfce4-session   880   0   n    y     0          1
               xfwm4   943   0   n    y     0          2
           neverball  1095   0   n    y     0          3

*)
More detailed and historically accurate description of various handover
implementation kindly provided by Emil Velikov:

"""
The traditional model, the server was the orchestrator managing the
primary device node. From the fd, to the master status and
authentication. But looking at the fd alone, this has varied across
the years.

IIRC in the DRI1 days, Xorg (libdrm really) would have a list of open
fd(s) and reuse those whenever needed, DRI2 the client was responsible
for open() themselves and with DRI3 the fd was passed to the client.

Around the inception of DRI3 and systemd-logind, the latter became
another possible orchestrator. Whereby Xorg and Wayland compositors
could ask it for the fd. For various reasons (hysterical and genuine
ones) Xorg has a fallback path going the open(), whereas Wayland
compositors are moving to solely relying on logind... some never had
fallback even.

Over the past few years, more projects have emerged which provide
functionality similar (be that on API level, Dbus, or otherwise) to
systemd-logind.
"""

v2:
 * Fixed typo in commit text and added a fine historical explanation
   from Emil.

Signed-off-by: Tvrtko Ursulin 
Cc: "Christian König" 
Cc: Daniel Vetter 
Acked-by: Christian König 
Reviewed-by: Emil Velikov 
Reviewed-by: Rob Clark 
Tested-by: Rob Clark 
Link: https://patchwork.freedesktop.org/patch/msgid/20230621094824.2348732-1-tvrtko.ursulin@linux.intel.com
Signed-off-by: Christian König 
Stable-dep-of: 5a6c9a05e55c ("drm: Fix FD ownership check in drm_master_check_perm()")
Signed-off-by: Sasha Levin

mm/damon/core: make damon_start() waits until kdamond_fn() starts

2024-01-01T12:42:23+00:00

[ Upstream commit 6376a824595607e99d032a39ba3394988b4fce96 ]

The cleanup tasks of kdamond threads including reset of corresponding
DAMON context's ->kdamond field and decrease of global nr_running_ctxs
counter is supposed to be executed by kdamond_fn().  However, commit
0f91d13366a4 ("mm/damon: simplify stop mechanism") made neither
damon_start() nor damon_stop() ensure the corresponding kdamond has
started the execution of kdamond_fn().

As a result, the cleanup can be skipped if damon_stop() is called fast
enough after the previous damon_start().  Especially the skipped reset
of ->kdamond could cause a use-after-free.

Fix it by waiting for start of kdamond_fn() execution from
damon_start().

Link: https://lkml.kernel.org/r/20231208175018.63880-1-sj@kernel.org
Fixes: 0f91d13366a4 ("mm/damon: simplify stop mechanism")
Signed-off-by: SeongJae Park 
Reported-by: Jakub Acs 
Cc: Changbin Du 
Cc: Jakub Acs 
Cc:  # 5.15.x
Signed-off-by: Andrew Morton 
Signed-off-by: Sasha Levin

mm/damon/core: use number of passed access sampling as a timer

2024-01-01T12:42:23+00:00

[ Upstream commit 4472edf63d6630e6cf65e205b4fc8c3c94d0afe5 ]

DAMON sleeps for sampling interval after each sampling, and check if the
aggregation interval and the ops update interval have passed using
ktime_get_coarse_ts64() and baseline timestamps for the intervals. That
design is for making the operations occur at deterministic timing
regardless of the time that spend for each work. However, it turned out
it is not that useful, and incur not-that-intuitive results.

After all, timer functions, and especially sleep functions that DAMON uses
to wait for specific timing, are not necessarily strictly accurate. It is
legal design, so no problem. However, depending on such inaccuracies, the
nr_accesses can be larger than aggregation interval divided by sampling
interval. For example, with the default setting (5 ms sampling interval
and 100 ms aggregation interval) we frequently show regions having
nr_accesses larger than 20. Also, if the execution of a DAMOS scheme
takes a long time, next aggregation could happen before enough number of
samples are collected. This is not what usual users would intuitively
expect.

Since access check sampling is the smallest unit work of DAMON, using the
number of passed sampling intervals as the DAMON-internal timer can easily
avoid these problems. That is, convert aggregation and ops update
intervals to numbers of sampling intervals that need to be passed before
those operations be executed, count the number of passed sampling
intervals, and invoke the operations as soon as the specific amount of
sampling intervals passed. Make the change.

Note that this could make a behavioral change to settings that using
intervals that not aligned by the sampling interval. For example, if the
sampling interval is 5 ms and the aggregation interval is 12 ms, DAMON
effectively uses 15 ms as its aggregation interval, because it checks
whether the aggregation interval after sleeping the sampling interval.
This change will make DAMON to effectively use 10 ms as aggregation
interval, since it uses 'aggregation interval / sampling interval *
sampling interval' as the effective aggregation interval, and we don't use
floating point types. Usual users would have used aligned intervals, so
this behavioral change is not expected to make any meaningful impact, so
just make this change.

Link: https://lkml.kernel.org/r/20230914021523.60649-1-sj@kernel.org
Signed-off-by: SeongJae Park
Signed-off-by: Andrew Morton
Stable-dep-of: 6376a8245956 ("mm/damon/core: make damon_start() waits until kdamond_fn() starts")
Signed-off-by: Sasha Levin