linux-stable.git/include, branch v6.6.86 Linux kernel stable tree drm/dp_mst: Add a helper to queue a topology probe 2025-04-07T08:06:36+00:00 Imre Deak imre.deak@intel.com 2024-07-22T16:54:51+00:00 5f57a96e92c60f62da91d58ceb5e5acd40e7d594 commit dbaeef363ea54f4c18112874b77503c72ba60fec upstream. A follow up i915 patch will need to reprobe the MST topology after the initial probing, add a helper for this. Cc: Lyude Paul <lyude@redhat.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240722165503.2084999-3-imre.deak@intel.com Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit dbaeef363ea54f4c18112874b77503c72ba60fec upstream.

A follow up i915 patch will need to reprobe the MST topology after the
initial probing, add a helper for this.

Cc: Lyude Paul <lyude@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240722165503.2084999-3-imre.deak@intel.com
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
proc: fix UAF in proc_get_inode() 2025-03-28T20:59:55+00:00 Ye Bin yebin10@huawei.com 2025-03-01T12:06:24+00:00 63b53198aff2e4e6c5866a4ff73c7891f958ffa4 commit 654b33ada4ab5e926cd9c570196fefa7bec7c1df upstream. Fix race between rmmod and /proc/XXX's inode instantiation. The bug is that pde->proc_ops don't belong to /proc, it belongs to a module, therefore dereferencing it after /proc entry has been registered is a bug unless use_pde/unuse_pde() pair has been used. use_pde/unuse_pde can be avoided (2 atomic ops!) because pde->proc_ops never changes so information necessary for inode instantiation can be saved _before_ proc_register() in PDE itself and used later, avoiding pde->proc_ops->... dereference. rmmod lookup sys_delete_module proc_lookup_de pde_get(de); proc_get_inode(dir->i_sb, de); mod->exit() proc_remove remove_proc_subtree proc_entry_rundown(de); free_module(mod); if (S_ISREG(inode->i_mode)) if (de->proc_ops->proc_read_iter) --> As module is already freed, will trigger UAF BUG: unable to handle page fault for address: fffffbfff80a702b PGD 817fc4067 P4D 817fc4067 PUD 817fc0067 PMD 102ef4067 PTE 0 Oops: Oops: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 26 UID: 0 PID: 2667 Comm: ls Tainted: G Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:proc_get_inode+0x302/0x6e0 RSP: 0018:ffff88811c837998 EFLAGS: 00010a06 RAX: dffffc0000000000 RBX: ffffffffc0538140 RCX: 0000000000000007 RDX: 1ffffffff80a702b RSI: 0000000000000001 RDI: ffffffffc0538158 RBP: ffff8881299a6000 R08: 0000000067bbe1e5 R09: 1ffff11023906f20 R10: ffffffffb560ca07 R11: ffffffffb2b43a58 R12: ffff888105bb78f0 R13: ffff888100518048 R14: ffff8881299a6004 R15: 0000000000000001 FS: 00007f95b9686840(0000) GS:ffff8883af100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff80a702b CR3: 0000000117dd2000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> proc_lookup_de+0x11f/0x2e0 __lookup_slow+0x188/0x350 walk_component+0x2ab/0x4f0 path_lookupat+0x120/0x660 filename_lookup+0x1ce/0x560 vfs_statx+0xac/0x150 __do_sys_newstat+0x96/0x110 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e [adobriyan@gmail.com: don't do 2 atomic ops on the common path] Link: https://lkml.kernel.org/r/3d25ded0-1739-447e-812b-e34da7990dcf@p183 Fixes: 778f3dd5a13c ("Fix procfs compat_ioctl regression") Signed-off-by: Ye Bin <yebin10@huawei.com> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: David S. Miller <davem@davemloft.net> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 654b33ada4ab5e926cd9c570196fefa7bec7c1df upstream.

Fix race between rmmod and /proc/XXX's inode instantiation.

The bug is that pde->proc_ops don't belong to /proc, it belongs to a
module, therefore dereferencing it after /proc entry has been registered
is a bug unless use_pde/unuse_pde() pair has been used.

use_pde/unuse_pde can be avoided (2 atomic ops!) because pde->proc_ops
never changes so information necessary for inode instantiation can be
saved _before_ proc_register() in PDE itself and used later, avoiding
pde->proc_ops->...  dereference.

      rmmod                         lookup
sys_delete_module
                         proc_lookup_de
			   pde_get(de);
			   proc_get_inode(dir->i_sb, de);
  mod->exit()
    proc_remove
      remove_proc_subtree
       proc_entry_rundown(de);
  free_module(mod);

                               if (S_ISREG(inode->i_mode))
	                         if (de->proc_ops->proc_read_iter)
                           --> As module is already freed, will trigger UAF

BUG: unable to handle page fault for address: fffffbfff80a702b
PGD 817fc4067 P4D 817fc4067 PUD 817fc0067 PMD 102ef4067 PTE 0
Oops: Oops: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 26 UID: 0 PID: 2667 Comm: ls Tainted: G
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:proc_get_inode+0x302/0x6e0
RSP: 0018:ffff88811c837998 EFLAGS: 00010a06
RAX: dffffc0000000000 RBX: ffffffffc0538140 RCX: 0000000000000007
RDX: 1ffffffff80a702b RSI: 0000000000000001 RDI: ffffffffc0538158
RBP: ffff8881299a6000 R08: 0000000067bbe1e5 R09: 1ffff11023906f20
R10: ffffffffb560ca07 R11: ffffffffb2b43a58 R12: ffff888105bb78f0
R13: ffff888100518048 R14: ffff8881299a6004 R15: 0000000000000001
FS:  00007f95b9686840(0000) GS:ffff8883af100000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffffbfff80a702b CR3: 0000000117dd2000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 proc_lookup_de+0x11f/0x2e0
 __lookup_slow+0x188/0x350
 walk_component+0x2ab/0x4f0
 path_lookupat+0x120/0x660
 filename_lookup+0x1ce/0x560
 vfs_statx+0xac/0x150
 __do_sys_newstat+0x96/0x110
 do_syscall_64+0x5f/0x170
 entry_SYSCALL_64_after_hwframe+0x76/0x7e

[adobriyan@gmail.com: don't do 2 atomic ops on the common path]
Link: https://lkml.kernel.org/r/3d25ded0-1739-447e-812b-e34da7990dcf@p183
Fixes: 778f3dd5a13c ("Fix procfs compat_ioctl regression")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David S. Miller <davem@davemloft.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bluetooth: hci_event: Fix connection regression between LE and non-LE adapters 2025-03-28T20:59:53+00:00 Arkadiusz Bokowy arkadiusz.bokowy@gmail.com 2025-03-12T19:09:43+00:00 59b683594ff39b75ee2bcaec1519567e4e0a6ce0 [ Upstream commit f6685a96c8c8a07e260e39bac86d4163cfb38a4d ] Due to a typo during defining HCI errors it is not possible to connect LE-capable device with BR/EDR only adapter. The connection is terminated by the LE adapter because the invalid LL params error code is treated as unsupported remote feature. Fixes: 79c0868ad65a ("Bluetooth: hci_event: Use HCI error defines instead of magic values") Signed-off-by: Arkadiusz Bokowy <arkadiusz.bokowy@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit f6685a96c8c8a07e260e39bac86d4163cfb38a4d ]

Due to a typo during defining HCI errors it is not possible to connect
LE-capable device with BR/EDR only adapter. The connection is terminated
by the LE adapter because the invalid LL params error code is treated
as unsupported remote feature.

Fixes: 79c0868ad65a ("Bluetooth: hci_event: Use HCI error defines instead of magic values")
Signed-off-by: Arkadiusz Bokowy <arkadiusz.bokowy@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
netfilter: nf_tables: allow clone callbacks to sleep 2025-03-22T19:50:50+00:00 Florian Westphal fw@strlen.de 2025-03-18T22:15:22+00:00 a561c6a034c9cbc9b85f8a587863898ab1455d89 commit fa23e0d4b756d25829e124d6b670a4c6bbd4bf7e upstream. Sven Auhagen reports transaction failures with following error: ./main.nft:13:1-26: Error: Could not process rule: Cannot allocate memory percpu: allocation failed, size=16 align=8 atomic=1, atomic alloc failed, no space left This points to failing pcpu allocation with GFP_ATOMIC flag. However, transactions happen from user context and are allowed to sleep. One case where we can call into percpu allocator with GFP_ATOMIC is nft_counter expression. Normally this happens from control plane, so this could use GFP_KERNEL instead. But one use case, element insertion from packet path, needs to use GFP_ATOMIC allocations (nft_dynset expression). At this time, .clone callbacks always use GFP_ATOMIC for this reason. Add gfp_t argument to the .clone function and pass GFP_KERNEL or GFP_ATOMIC flag depending on context, this allows all clone memory allocations to sleep for the normal (transaction) case. Cc: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit fa23e0d4b756d25829e124d6b670a4c6bbd4bf7e upstream.

Sven Auhagen reports transaction failures with following error:
  ./main.nft:13:1-26: Error: Could not process rule: Cannot allocate memory
  percpu: allocation failed, size=16 align=8 atomic=1, atomic alloc failed, no space left

This points to failing pcpu allocation with GFP_ATOMIC flag.
However, transactions happen from user context and are allowed to sleep.

One case where we can call into percpu allocator with GFP_ATOMIC is
nft_counter expression.

Normally this happens from control plane, so this could use GFP_KERNEL
instead.  But one use case, element insertion from packet path,
needs to use GFP_ATOMIC allocations (nft_dynset expression).

At this time, .clone callbacks always use GFP_ATOMIC for this reason.

Add gfp_t argument to the .clone function and pass GFP_KERNEL or
GFP_ATOMIC flag depending on context, this allows all clone memory
allocations to sleep for the normal (transaction) case.

Cc: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
netfilter: nf_tables: use timestamp to check for set element timeout 2025-03-22T19:50:50+00:00 Pablo Neira Ayuso pablo@netfilter.org 2024-02-05T23:11:40+00:00 7fa2e2960fff8322ce2ded57b5f8e9cbc450b967 commit 7395dfacfff65e9938ac0889dafa1ab01e987d15 upstream. Add a timestamp field at the beginning of the transaction, store it in the nftables per-netns area. Update set backend .insert, .deactivate and sync gc path to use the timestamp, this avoids that an element expires while control plane transaction is still unfinished. .lookup and .update, which are used from packet path, still use the current time to check if the element has expired. And .get path and dump also since this runs lockless under rcu read size lock. Then, there is async gc which also needs to check the current time since it runs asynchronously from a workqueue. Fixes: c3e1b005ed1c ("netfilter: nf_tables: add set element timeout support") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Jianqi Ren <jianqi.ren.cn@windriver.com> Signed-off-by: He Zhe <zhe.he@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7395dfacfff65e9938ac0889dafa1ab01e987d15 upstream.

Add a timestamp field at the beginning of the transaction, store it
in the nftables per-netns area.

Update set backend .insert, .deactivate and sync gc path to use the
timestamp, this avoids that an element expires while control plane
transaction is still unfinished.

.lookup and .update, which are used from packet path, still use the
current time to check if the element has expired. And .get path and dump
also since this runs lockless under rcu read size lock. Then, there is
async gc which also needs to check the current time since it runs
asynchronously from a workqueue.

Fixes: c3e1b005ed1c ("netfilter: nf_tables: add set element timeout support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Jianqi Ren <jianqi.ren.cn@windriver.com>
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bluetooth: L2CAP: Fix corrupted list in hci_chan_del 2025-03-22T19:50:50+00:00 Luiz Augusto von Dentz luiz.von.dentz@intel.com 2025-02-06T20:54:45+00:00 efc30877bd4bc85fefe98d80af60fafc86e5775e commit ab4eedb790cae44313759b50fe47da285e2519d5 upstream. This fixes the following trace by reworking the locking of l2cap_conn so instead of only locking when changing the chan_l list this promotes chan_lock to a general lock of l2cap_conn so whenever it is being held it would prevents the likes of l2cap_conn_del to run: list_del corruption, ffff888021297e00->prev is LIST_POISON2 (dead000000000122) ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:61! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 UID: 0 PID: 5896 Comm: syz-executor213 Not tainted 6.14.0-rc1-next-20250204-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 12/27/2024 RIP: 0010:__list_del_entry_valid_or_report+0x12c/0x190 lib/list_debug.c:59 Code: 8c 4c 89 fe 48 89 da e8 32 8c 37 fc 90 0f 0b 48 89 df e8 27 9f 14 fd 48 c7 c7 a0 c0 60 8c 4c 89 fe 48 89 da e8 15 8c 37 fc 90 <0f> 0b 4c 89 e7 e8 0a 9f 14 fd 42 80 3c 2b 00 74 08 4c 89 e7 e8 cb RSP: 0018:ffffc90003f6f998 EFLAGS: 00010246 RAX: 000000000000004e RBX: dead000000000122 RCX: 01454d423f7fbf00 RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000 RBP: dffffc0000000000 R08: ffffffff819f077c R09: 1ffff920007eded0 R10: dffffc0000000000 R11: fffff520007eded1 R12: dead000000000122 R13: dffffc0000000000 R14: ffff8880352248d8 R15: ffff888021297e00 FS: 00007f7ace6686c0(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7aceeeb1d0 CR3: 000000003527c000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __list_del_entry_valid include/linux/list.h:124 [inline] __list_del_entry include/linux/list.h:215 [inline] list_del_rcu include/linux/rculist.h:168 [inline] hci_chan_del+0x70/0x1b0 net/bluetooth/hci_conn.c:2858 l2cap_conn_free net/bluetooth/l2cap_core.c:1816 [inline] kref_put include/linux/kref.h:65 [inline] l2cap_conn_put+0x70/0xe0 net/bluetooth/l2cap_core.c:1830 l2cap_sock_shutdown+0xa8a/0x1020 net/bluetooth/l2cap_sock.c:1377 l2cap_sock_release+0x79/0x1d0 net/bluetooth/l2cap_sock.c:1416 __sock_release net/socket.c:642 [inline] sock_close+0xbc/0x240 net/socket.c:1393 __fput+0x3e9/0x9f0 fs/file_table.c:448 task_work_run+0x24f/0x310 kernel/task_work.c:227 ptrace_notify+0x2d2/0x380 kernel/signal.c:2522 ptrace_report_syscall include/linux/ptrace.h:415 [inline] ptrace_report_syscall_exit include/linux/ptrace.h:477 [inline] syscall_exit_work+0xc7/0x1d0 kernel/entry/common.c:173 syscall_exit_to_user_mode_prepare kernel/entry/common.c:200 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:205 [inline] syscall_exit_to_user_mode+0x24a/0x340 kernel/entry/common.c:218 do_syscall_64+0x100/0x230 arch/x86/entry/common.c:89 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f7aceeaf449 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 41 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f7ace668218 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: fffffffffffffffc RBX: 00007f7acef39328 RCX: 00007f7aceeaf449 RDX: 000000000000000e RSI: 0000000020000100 RDI: 0000000000000004 RBP: 00007f7acef39320 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003 R13: 0000000000000004 R14: 00007f7ace668670 R15: 000000000000000b </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:__list_del_entry_valid_or_report+0x12c/0x190 lib/list_debug.c:59 Code: 8c 4c 89 fe 48 89 da e8 32 8c 37 fc 90 0f 0b 48 89 df e8 27 9f 14 fd 48 c7 c7 a0 c0 60 8c 4c 89 fe 48 89 da e8 15 8c 37 fc 90 <0f> 0b 4c 89 e7 e8 0a 9f 14 fd 42 80 3c 2b 00 74 08 4c 89 e7 e8 cb RSP: 0018:ffffc90003f6f998 EFLAGS: 00010246 RAX: 000000000000004e RBX: dead000000000122 RCX: 01454d423f7fbf00 RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000 RBP: dffffc0000000000 R08: ffffffff819f077c R09: 1ffff920007eded0 R10: dffffc0000000000 R11: fffff520007eded1 R12: dead000000000122 R13: dffffc0000000000 R14: ffff8880352248d8 R15: ffff888021297e00 FS: 00007f7ace6686c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7acef05b08 CR3: 000000003527c000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Reported-by: syzbot+10bd8fe6741eedd2be2e@syzkaller.appspotmail.com Tested-by: syzbot+10bd8fe6741eedd2be2e@syzkaller.appspotmail.com Fixes: b4f82f9ed43a ("Bluetooth: L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ab4eedb790cae44313759b50fe47da285e2519d5 upstream.

This fixes the following trace by reworking the locking of l2cap_conn
so instead of only locking when changing the chan_l list this promotes
chan_lock to a general lock of l2cap_conn so whenever it is being held
it would prevents the likes of l2cap_conn_del to run:

list_del corruption, ffff888021297e00->prev is LIST_POISON2 (dead000000000122)
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:61!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 1 UID: 0 PID: 5896 Comm: syz-executor213 Not tainted 6.14.0-rc1-next-20250204-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 12/27/2024
RIP: 0010:__list_del_entry_valid_or_report+0x12c/0x190 lib/list_debug.c:59
Code: 8c 4c 89 fe 48 89 da e8 32 8c 37 fc 90 0f 0b 48 89 df e8 27 9f 14 fd 48 c7 c7 a0 c0 60 8c 4c 89 fe 48 89 da e8 15 8c 37 fc 90 <0f> 0b 4c 89 e7 e8 0a 9f 14 fd 42 80 3c 2b 00 74 08 4c 89 e7 e8 cb
RSP: 0018:ffffc90003f6f998 EFLAGS: 00010246
RAX: 000000000000004e RBX: dead000000000122 RCX: 01454d423f7fbf00
RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000
RBP: dffffc0000000000 R08: ffffffff819f077c R09: 1ffff920007eded0
R10: dffffc0000000000 R11: fffff520007eded1 R12: dead000000000122
R13: dffffc0000000000 R14: ffff8880352248d8 R15: ffff888021297e00
FS:  00007f7ace6686c0(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7aceeeb1d0 CR3: 000000003527c000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 __list_del_entry_valid include/linux/list.h:124 [inline]
 __list_del_entry include/linux/list.h:215 [inline]
 list_del_rcu include/linux/rculist.h:168 [inline]
 hci_chan_del+0x70/0x1b0 net/bluetooth/hci_conn.c:2858
 l2cap_conn_free net/bluetooth/l2cap_core.c:1816 [inline]
 kref_put include/linux/kref.h:65 [inline]
 l2cap_conn_put+0x70/0xe0 net/bluetooth/l2cap_core.c:1830
 l2cap_sock_shutdown+0xa8a/0x1020 net/bluetooth/l2cap_sock.c:1377
 l2cap_sock_release+0x79/0x1d0 net/bluetooth/l2cap_sock.c:1416
 __sock_release net/socket.c:642 [inline]
 sock_close+0xbc/0x240 net/socket.c:1393
 __fput+0x3e9/0x9f0 fs/file_table.c:448
 task_work_run+0x24f/0x310 kernel/task_work.c:227
 ptrace_notify+0x2d2/0x380 kernel/signal.c:2522
 ptrace_report_syscall include/linux/ptrace.h:415 [inline]
 ptrace_report_syscall_exit include/linux/ptrace.h:477 [inline]
 syscall_exit_work+0xc7/0x1d0 kernel/entry/common.c:173
 syscall_exit_to_user_mode_prepare kernel/entry/common.c:200 [inline]
 __syscall_exit_to_user_mode_work kernel/entry/common.c:205 [inline]
 syscall_exit_to_user_mode+0x24a/0x340 kernel/entry/common.c:218
 do_syscall_64+0x100/0x230 arch/x86/entry/common.c:89
 entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f7aceeaf449
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 41 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f7ace668218 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: fffffffffffffffc RBX: 00007f7acef39328 RCX: 00007f7aceeaf449
RDX: 000000000000000e RSI: 0000000020000100 RDI: 0000000000000004
RBP: 00007f7acef39320 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003
R13: 0000000000000004 R14: 00007f7ace668670 R15: 000000000000000b
 </TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:__list_del_entry_valid_or_report+0x12c/0x190 lib/list_debug.c:59
Code: 8c 4c 89 fe 48 89 da e8 32 8c 37 fc 90 0f 0b 48 89 df e8 27 9f 14 fd 48 c7 c7 a0 c0 60 8c 4c 89 fe 48 89 da e8 15 8c 37 fc 90 <0f> 0b 4c 89 e7 e8 0a 9f 14 fd 42 80 3c 2b 00 74 08 4c 89 e7 e8 cb
RSP: 0018:ffffc90003f6f998 EFLAGS: 00010246
RAX: 000000000000004e RBX: dead000000000122 RCX: 01454d423f7fbf00
RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000
RBP: dffffc0000000000 R08: ffffffff819f077c R09: 1ffff920007eded0
R10: dffffc0000000000 R11: fffff520007eded1 R12: dead000000000122
R13: dffffc0000000000 R14: ffff8880352248d8 R15: ffff888021297e00
FS:  00007f7ace6686c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7acef05b08 CR3: 000000003527c000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Reported-by: syzbot+10bd8fe6741eedd2be2e@syzkaller.appspotmail.com
Tested-by: syzbot+10bd8fe6741eedd2be2e@syzkaller.appspotmail.com
Fixes: b4f82f9ed43a ("Bluetooth: L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ASoC: ops: Consistently treat platform_max as control value 2025-03-22T19:50:48+00:00 Charles Keepax ckeepax@opensource.cirrus.com 2025-02-28T15:14:56+00:00 544055329560d4b64fe204fc6be325ebc24c72ca [ Upstream commit 0eba2a7e858907a746ba69cd002eb9eb4dbd7bf3 ] This reverts commit 9bdd10d57a88 ("ASoC: ops: Shift tested values in snd_soc_put_volsw() by +min"), and makes some additional related updates. There are two ways the platform_max could be interpreted; the maximum register value, or the maximum value the control can be set to. The patch moved from treating the value as a control value to a register one. When the patch was applied it was technically correct as snd_soc_limit_volume() also used the register interpretation. However, even then most of the other usages treated platform_max as a control value, and snd_soc_limit_volume() has since been updated to also do so in commit fb9ad24485087 ("ASoC: ops: add correct range check for limiting volume"). That patch however, missed updating snd_soc_put_volsw() back to the control interpretation, and fixing snd_soc_info_volsw_range(). The control interpretation makes more sense as limiting is typically done from the machine driver, so it is appropriate to use the customer facing representation rather than the internal codec representation. Update all the code to consistently use this interpretation of platform_max. Finally, also add some comments to the soc_mixer_control struct to hopefully avoid further patches switching between the two approaches. Fixes: fb9ad24485087 ("ASoC: ops: add correct range check for limiting volume") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250228151456.3703342-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 0eba2a7e858907a746ba69cd002eb9eb4dbd7bf3 ]

This reverts commit 9bdd10d57a88 ("ASoC: ops: Shift tested values in
snd_soc_put_volsw() by +min"), and makes some additional related
updates.

There are two ways the platform_max could be interpreted; the maximum
register value, or the maximum value the control can be set to. The
patch moved from treating the value as a control value to a register
one. When the patch was applied it was technically correct as
snd_soc_limit_volume() also used the register interpretation. However,
even then most of the other usages treated platform_max as a
control value, and snd_soc_limit_volume() has since been updated to
also do so in commit fb9ad24485087 ("ASoC: ops: add correct range
check for limiting volume"). That patch however, missed updating
snd_soc_put_volsw() back to the control interpretation, and fixing
snd_soc_info_volsw_range(). The control interpretation makes more
sense as limiting is typically done from the machine driver, so it is
appropriate to use the customer facing representation rather than the
internal codec representation. Update all the code to consistently use
this interpretation of platform_max.

Finally, also add some comments to the soc_mixer_control struct to
hopefully avoid further patches switching between the two approaches.

Fixes: fb9ad24485087 ("ASoC: ops: add correct range check for limiting volume")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250228151456.3703342-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
io_uring/kbuf: use vm_insert_pages() for mmap'ed pbuf ring 2025-03-22T19:50:45+00:00 Jens Axboe axboe@kernel.dk 2024-03-13T02:24:21+00:00 46b1b3d81a7e99574e1a2f914086bc2fe382d79d Commit 87585b05757dc70545efb434669708d276125559 upstream. Rather than use remap_pfn_range() for this and manually free later, switch to using vm_insert_page() and have it Just Work. This requires a bit of effort on the mmap lookup side, as the ctx uring_lock isn't held, which otherwise protects buffer_lists from being torn down, and it's not safe to grab from mmap context that would introduce an ABBA deadlock between the mmap lock and the ctx uring_lock. Instead, lookup the buffer_list under RCU, as the the list is RCU freed already. Use the existing reference count to determine whether it's possible to safely grab a reference to it (eg if it's not zero already), and drop that reference when done with the mapping. If the mmap reference is the last one, the buffer_list and the associated memory can go away, since the vma insertion has references to the inserted pages at that point. Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Commit 87585b05757dc70545efb434669708d276125559 upstream.

Rather than use remap_pfn_range() for this and manually free later,
switch to using vm_insert_page() and have it Just Work.

This requires a bit of effort on the mmap lookup side, as the ctx
uring_lock isn't held, which  otherwise protects buffer_lists from being
torn down, and it's not safe to grab from mmap context that would
introduce an ABBA deadlock between the mmap lock and the ctx uring_lock.
Instead, lookup the buffer_list under RCU, as the the list is RCU freed
already. Use the existing reference count to determine whether it's
possible to safely grab a reference to it (eg if it's not zero already),
and drop that reference when done with the mapping. If the mmap
reference is the last one, the buffer_list and the associated memory can
go away, since the vma insertion has references to the inserted pages at
that point.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fuse: don't truncate cached, mutated symlink 2025-03-22T19:50:44+00:00 Miklos Szeredi mszeredi@redhat.com 2025-02-20T10:02:58+00:00 fcfb7ea1f4c62323fb1fe8a893c96a957ba19bea [ Upstream commit b4c173dfbb6c78568578ff18f9e8822d7bd0e31b ] Fuse allows the value of a symlink to change and this property is exploited by some filesystems (e.g. CVMFS). It has been observed, that sometimes after changing the symlink contents, the value is truncated to the old size. This is caused by fuse_getattr() racing with fuse_reverse_inval_inode(). fuse_reverse_inval_inode() updates the fuse_inode's attr_version, which results in fuse_change_attributes() exiting before updating the cached attributes This is okay, as the cached attributes remain invalid and the next call to fuse_change_attributes() will likely update the inode with the correct values. The reason this causes problems is that cached symlinks will be returned through page_get_link(), which truncates the symlink to inode->i_size. This is correct for filesystems that don't mutate symlinks, but in this case it causes bad behavior. The solution is to just remove this truncation. This can cause a regression in a filesystem that relies on supplying a symlink larger than the file size, but this is unlikely. If that happens we'd need to make this behavior conditional. Reported-by: Laura Promberger <laura.promberger@cern.ch> Tested-by: Sam Lewis <samclewis@google.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Link: https://lore.kernel.org/r/20250220100258.793363-1-mszeredi@redhat.com Reviewed-by: Bernd Schubert <bschubert@ddn.com> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit b4c173dfbb6c78568578ff18f9e8822d7bd0e31b ]

Fuse allows the value of a symlink to change and this property is exploited
by some filesystems (e.g. CVMFS).

It has been observed, that sometimes after changing the symlink contents,
the value is truncated to the old size.

This is caused by fuse_getattr() racing with fuse_reverse_inval_inode().
fuse_reverse_inval_inode() updates the fuse_inode's attr_version, which
results in fuse_change_attributes() exiting before updating the cached
attributes

This is okay, as the cached attributes remain invalid and the next call to
fuse_change_attributes() will likely update the inode with the correct
values.

The reason this causes problems is that cached symlinks will be
returned through page_get_link(), which truncates the symlink to
inode->i_size.  This is correct for filesystems that don't mutate
symlinks, but in this case it causes bad behavior.

The solution is to just remove this truncation.  This can cause a
regression in a filesystem that relies on supplying a symlink larger than
the file size, but this is unlikely.  If that happens we'd need to make
this behavior conditional.

Reported-by: Laura Promberger <laura.promberger@cern.ch>
Tested-by: Sam Lewis <samclewis@google.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://lore.kernel.org/r/20250220100258.793363-1-mszeredi@redhat.com
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
nvme-tcp: add basic support for the C2HTermReq PDU 2025-03-22T19:50:43+00:00 Maurizio Lombardi mlombard@redhat.com 2025-02-17T16:08:27+00:00 e9764289d7659ff995fcae327365f172becf0dec [ Upstream commit 84e009042d0f3dfe91bec60bcd208ee3f866cbcd ] Previously, the NVMe/TCP host driver did not handle the C2HTermReq PDU, instead printing "unsupported pdu type (3)" when received. This patch adds support for processing the C2HTermReq PDU, allowing the driver to print the Fatal Error Status field. Example of output: nvme nvme4: Received C2HTermReq (FES = Invalid PDU Header Field) Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 84e009042d0f3dfe91bec60bcd208ee3f866cbcd ]

Previously, the NVMe/TCP host driver did not handle the C2HTermReq PDU,
instead printing "unsupported pdu type (3)" when received. This patch adds
support for processing the C2HTermReq PDU, allowing the driver
to print the Fatal Error Status field.

Example of output:
nvme nvme4: Received C2HTermReq (FES = Invalid PDU Header Field)

Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>