linux-stable.git/include, branch v6.3.9

neighbour: delete neigh_lookup_nodev as not used

2023-06-21T14:02:18+00:00

commit 76b9bf965c98c9b53ef7420b3b11438dbd764f92 upstream.

neigh_lookup_nodev isn't used in the kernel after removal
of DECnet. So let's remove it.

Fixes: 1202cdd66531 ("Remove DECnet support from kernel")
Signed-off-by: Leon Romanovsky 
Reviewed-by: Eric Dumazet 
Reviewed-by: Nikolay Aleksandrov 
Link: https://lore.kernel.org/r/eb5656200d7964b2d177a36b77efa3c597d6d72d.1678267343.git.leonro@nvidia.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

Revert "media: dvb-core: Fix use-after-free on race condition at dvb_frontend"

2023-06-21T14:02:17+00:00

[ Upstream commit ec21a38df77a5aefbd2f70c48127003b6f259cf3 ]

As reported by Thomas Voegtle , sometimes a DVB card does
not initialize properly booting Linux 6.4-rc4. This is not always, maybe
in 3 out of 4 attempts.

After double-checking, the root cause seems to be related to the
UAF fix, which is causing a race issue:

[   26.332149] tda10071 7-0005: found a 'NXP TDA10071' in cold state, will try to load a firmware
[   26.340779] tda10071 7-0005: downloading firmware from file 'dvb-fe-tda10071.fw'
[  989.277402] INFO: task vdr:743 blocked for more than 491 seconds.
[  989.283504]       Not tainted 6.4.0-rc5-i5 #249
[  989.288036] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  989.295860] task:vdr             state:D stack:0     pid:743   ppid:711    flags:0x00004002
[  989.295865] Call Trace:
[  989.295867]  
[  989.295869]  __schedule+0x2ea/0x12d0
[  989.295877]  ? asm_sysvec_apic_timer_interrupt+0x16/0x20
[  989.295881]  schedule+0x57/0xc0
[  989.295884]  schedule_preempt_disabled+0xc/0x20
[  989.295887]  __mutex_lock.isra.16+0x237/0x480
[  989.295891]  ? dvb_get_property.isra.10+0x1bc/0xa50
[  989.295898]  ? dvb_frontend_stop+0x36/0x180
[  989.338777]  dvb_frontend_stop+0x36/0x180
[  989.338781]  dvb_frontend_open+0x2f1/0x470
[  989.338784]  dvb_device_open+0x81/0xf0
[  989.338804]  ? exact_lock+0x20/0x20
[  989.338808]  chrdev_open+0x7f/0x1c0
[  989.338811]  ? generic_permission+0x1a2/0x230
[  989.338813]  ? link_path_walk.part.63+0x340/0x380
[  989.338815]  ? exact_lock+0x20/0x20
[  989.338817]  do_dentry_open+0x18e/0x450
[  989.374030]  path_openat+0xca5/0xe00
[  989.374031]  ? terminate_walk+0xec/0x100
[  989.374034]  ? path_lookupat+0x93/0x140
[  989.374036]  do_filp_open+0xc0/0x140
[  989.374038]  ? __call_rcu_common.constprop.91+0x92/0x240
[  989.374041]  ? __check_object_size+0x147/0x260
[  989.374043]  ? __check_object_size+0x147/0x260
[  989.374045]  ? alloc_fd+0xbb/0x180
[  989.374048]  ? do_sys_openat2+0x243/0x310
[  989.374050]  do_sys_openat2+0x243/0x310
[  989.374052]  do_sys_open+0x52/0x80
[  989.374055]  do_syscall_64+0x5b/0x80
[  989.421335]  ? __task_pid_nr_ns+0x92/0xa0
[  989.421337]  ? syscall_exit_to_user_mode+0x20/0x40
[  989.421339]  ? do_syscall_64+0x67/0x80
[  989.421341]  ? syscall_exit_to_user_mode+0x20/0x40
[  989.421343]  ? do_syscall_64+0x67/0x80
[  989.421345]  entry_SYSCALL_64_after_hwframe+0x63/0xcd
[  989.421348] RIP: 0033:0x7fe895d067e3
[  989.421349] RSP: 002b:00007fff933c2ba0 EFLAGS: 00000293 ORIG_RAX: 0000000000000101
[  989.421351] RAX: ffffffffffffffda RBX: 00007fff933c2c10 RCX: 00007fe895d067e3
[  989.421352] RDX: 0000000000000802 RSI: 00005594acdce160 RDI: 00000000ffffff9c
[  989.421353] RBP: 0000000000000802 R08: 0000000000000000 R09: 0000000000000000
[  989.421353] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000001
[  989.421354] R13: 00007fff933c2ca0 R14: 00000000ffffffff R15: 00007fff933c2c90
[  989.421355]  

This reverts commit 6769a0b7ee0c3b31e1b22c3fadff2bfb642de23f.

Fixes: 6769a0b7ee0c ("media: dvb-core: Fix use-after-free on race condition at dvb_frontend")
Link: https://lore.kernel.org/all/da5382ad-09d6-20ac-0d53-611594b30861@lio96.de/
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

net/sched: qdisc_destroy() old ingress and clsact Qdiscs before grafting

2023-06-21T14:02:17+00:00

[ Upstream commit 84ad0af0bccd3691cb951c2974c5cb2c10594d4a ]

mini_Qdisc_pair::p_miniq is a double pointer to mini_Qdisc, initialized
in ingress_init() to point to net_device::miniq_ingress.  ingress Qdiscs
access this per-net_device pointer in mini_qdisc_pair_swap().  Similar
for clsact Qdiscs and miniq_egress.

Unfortunately, after introducing RTNL-unlocked RTM_{NEW,DEL,GET}TFILTER
requests (thanks Hillf Danton for the hint), when replacing ingress or
clsact Qdiscs, for example, the old Qdisc ("@old") could access the same
miniq_{in,e}gress pointer(s) concurrently with the new Qdisc ("@new"),
causing race conditions [1] including a use-after-free bug in
mini_qdisc_pair_swap() reported by syzbot:

 BUG: KASAN: slab-use-after-free in mini_qdisc_pair_swap+0x1c2/0x1f0 net/sched/sch_generic.c:1573
 Write of size 8 at addr ffff888045b31308 by task syz-executor690/14901
...
 Call Trace:
  
  __dump_stack lib/dump_stack.c:88 [inline]
  dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106
  print_address_description.constprop.0+0x2c/0x3c0 mm/kasan/report.c:319
  print_report mm/kasan/report.c:430 [inline]
  kasan_report+0x11c/0x130 mm/kasan/report.c:536
  mini_qdisc_pair_swap+0x1c2/0x1f0 net/sched/sch_generic.c:1573
  tcf_chain_head_change_item net/sched/cls_api.c:495 [inline]
  tcf_chain0_head_change.isra.0+0xb9/0x120 net/sched/cls_api.c:509
  tcf_chain_tp_insert net/sched/cls_api.c:1826 [inline]
  tcf_chain_tp_insert_unique net/sched/cls_api.c:1875 [inline]
  tc_new_tfilter+0x1de6/0x2290 net/sched/cls_api.c:2266
...

@old and @new should not affect each other.  In other words, @old should
never modify miniq_{in,e}gress after @new, and @new should not update
@old's RCU state.

Fixing without changing sch_api.c turned out to be difficult (please
refer to Closes: for discussions).  Instead, make sure @new's first call
always happen after @old's last call (in {ingress,clsact}_destroy()) has
finished:

In qdisc_graft(), return -EBUSY if @old has any ongoing filter requests,
and call qdisc_destroy() for @old before grafting @new.

Introduce qdisc_refcount_dec_if_one() as the counterpart of
qdisc_refcount_inc_nz() used for filter requests.  Introduce a
non-static version of qdisc_destroy() that does a TCQ_F_BUILTIN check,
just like qdisc_put() etc.

Depends on patch "net/sched: Refactor qdisc_graft() for ingress and
clsact Qdiscs".

[1] To illustrate, the syzkaller reproducer adds ingress Qdiscs under
TC_H_ROOT (no longer possible after commit c7cfbd115001 ("net/sched:
sch_ingress: Only create under TC_H_INGRESS")) on eth0 that has 8
transmission queues:

  Thread 1 creates ingress Qdisc A (containing mini Qdisc a1 and a2),
  then adds a flower filter X to A.

  Thread 2 creates another ingress Qdisc B (containing mini Qdisc b1 and
  b2) to replace A, then adds a flower filter Y to B.

 Thread 1               A's refcnt   Thread 2
  RTM_NEWQDISC (A, RTNL-locked)
   qdisc_create(A)               1
   qdisc_graft(A)                9

  RTM_NEWTFILTER (X, RTNL-unlocked)
   __tcf_qdisc_find(A)          10
   tcf_chain0_head_change(A)
   mini_qdisc_pair_swap(A) (1st)
            |
            |                         RTM_NEWQDISC (B, RTNL-locked)
         RCU sync                2     qdisc_graft(B)
            |                    1     notify_and_destroy(A)
            |
   tcf_block_release(A)          0    RTM_NEWTFILTER (Y, RTNL-unlocked)
   qdisc_destroy(A)                    tcf_chain0_head_change(B)
   tcf_chain0_head_change_cb_del(A)    mini_qdisc_pair_swap(B) (2nd)
   mini_qdisc_pair_swap(A) (3rd)                |
           ...                                 ...

Here, B calls mini_qdisc_pair_swap(), pointing eth0->miniq_ingress to
its mini Qdisc, b1.  Then, A calls mini_qdisc_pair_swap() again during
ingress_destroy(), setting eth0->miniq_ingress to NULL, so ingress
packets on eth0 will not find filter Y in sch_handle_ingress().

This is just one of the possible consequences of concurrently accessing
miniq_{in,e}gress pointers.

Fixes: 7a096d579e8e ("net: sched: ingress: set 'unlocked' flag for Qdisc ops")
Fixes: 87f373921c4e ("net: sched: ingress: set 'unlocked' flag for clsact Qdisc ops")
Reported-by: syzbot+b53a9c0d1ea4ad62da8b@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/0000000000006cf87705f79acf1a@google.com/
Cc: Hillf Danton 
Cc: Vlad Buslov 
Signed-off-by: Peilin Ye 
Acked-by: Jamal Hadi Salim 
Signed-off-by: Paolo Abeni 
Signed-off-by: Sasha Levin

net/sched: act_ct: Fix promotion of offloaded unreplied tuple

2023-06-21T14:02:17+00:00

[ Upstream commit 41f2c7c342d3adb1c4dd5f2e3dd831adff16a669 ]

Currently UNREPLIED and UNASSURED connections are added to the nf flow
table. This causes the following connection packets to be processed
by the flow table which then skips conntrack_in(), and thus such the
connections will remain UNREPLIED and UNASSURED even if reply traffic
is then seen. Even still, the unoffloaded reply packets are the ones
triggering hardware update from new to established state, and if
there aren't any to triger an update and/or previous update was
missed, hardware can get out of sync with sw and still mark
packets as new.

Fix the above by:
1) Not skipping conntrack_in() for UNASSURED packets, but still
   refresh for hardware, as before the cited patch.
2) Try and force a refresh by reply-direction packets that update
   the hardware rules from new to established state.
3) Remove any bidirectional flows that didn't failed to update in
   hardware for re-insertion as bidrectional once any new packet
   arrives.

Fixes: 6a9bad0069cf ("net/sched: act_ct: offload UDP NEW connections")
Co-developed-by: Vlad Buslov 
Signed-off-by: Vlad Buslov 
Signed-off-by: Paul Blakey 
Reviewed-by: Florian Westphal 
Link: https://lore.kernel.org/r/1686313379-117663-1-git-send-email-paulb@nvidia.com
Signed-off-by: Paolo Abeni 
Signed-off-by: Sasha Levin

net: ethtool: correct MAX attribute value for stats

2023-06-21T14:02:15+00:00

[ Upstream commit 52f79609c0c5b25fddb88e85f25ce08aa7e3fb42 ]

When compiling YNL generated code compiler complains about
array-initializer-out-of-bounds. Turns out the MAX value
for STATS_GRP uses the value for STATS.

This may lead to random corruptions in user space (kernel
itself doesn't use this value as it never parses stats).

Fixes: f09ea6fb1272 ("ethtool: add a new command for reading standard stats")
Signed-off-by: Jakub Kicinski 
Reviewed-by: David Ahern 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

RDMA/mlx5: Fix affinity assignment

2023-06-21T14:02:15+00:00

[ Upstream commit 617f5db1a626f18d5cbb7c7faf7bf8f9ea12be78 ]

The cited commit aimed to ensure that Virtual Functions (VFs) assign a
queue affinity to a Queue Pair (QP) to distribute traffic when
the LAG master creates a hardware LAG. If the affinity was set while
the hardware was not in LAG, the firmware would ignore the affinity value.

However, this commit unintentionally assigned an affinity to QPs on the LAG
master's VPORT even if the RDMA device was not marked as LAG-enabled.
In most cases, this was not an issue because when the hardware entered
hardware LAG configuration, the RDMA device of the LAG master would be
destroyed and a new one would be created, marked as LAG-enabled.

The problem arises when a user configures Equal-Cost Multipath (ECMP).
In ECMP mode, traffic can be directed to different physical ports based on
the queue affinity, which is intended for use by VPORTS other than the
E-Switch manager. ECMP mode is supported only if both E-Switch managers are
in switchdev mode and the appropriate route is configured via IP. In this
configuration, the RDMA device is not destroyed, and we retain the RDMA
device that is not marked as LAG-enabled.

To ensure correct behavior, Send Queues (SQs) opened by the E-Switch
manager through verbs should be assigned strict affinity. This means they
will only be able to communicate through the native physical port
associated with the E-Switch manager. This will prevent the firmware from
assigning affinity and will not allow the SQs to be remapped in case of
failover.

Fixes: 802dcc7fc5ec ("RDMA/mlx5: Support TX port affinity for VF drivers in LAG mode")
Reviewed-by: Maor Gottlieb
Signed-off-by: Mark Bloch
Link: https://lore.kernel.org/r/425b05f4da840bc684b0f7e8ebf61aeb5cef09b0.1685960567.git.leon@kernel.org
Signed-off-by: Leon Romanovsky
Signed-off-by: Sasha Levin

RDMA/cma: Always set static rate to 0 for RoCE

2023-06-21T14:02:15+00:00

[ Upstream commit 58030c76cce473b6cfd630bbecb97215def0dff8 ]

Set static rate to 0 as it should be discovered by path query and
has no meaning for RoCE.
This also avoid of using the rtnl lock and ethtool API, which is
a bottleneck when try to setup many rdma-cm connections at the same
time, especially with multiple processes.

Fixes: 3c86aa70bf67 ("RDMA/cm: Add RDMA CM support for IBoE devices")
Signed-off-by: Mark Zhang 
Link: https://lore.kernel.org/r/f72a4f8b667b803aee9fa794069f61afb5839ce4.1685960567.git.leon@kernel.org
Signed-off-by: Leon Romanovsky 
Signed-off-by: Sasha Levin

netfilter: nf_tables: integrate pipapo into commit protocol

2023-06-21T14:02:13+00:00

[ Upstream commit 212ed75dc5fb9d1423b3942c8f872a868cda3466 ]

The pipapo set backend follows copy-on-update approach, maintaining one
clone of the existing datastructure that is being updated. The clone
and current datastructures are swapped via rcu from the commit step.

The existing integration with the commit protocol is flawed because
there is no operation to clean up the clone if the transaction is
aborted. Moreover, the datastructure swap happens on set element
activation.

This patch adds two new operations for sets: commit and abort, these new
operations are invoked from the commit and abort steps, after the
transactions have been digested, and it updates the pipapo set backend
to use it.

This patch adds a new ->pending_update field to sets to maintain a list
of sets that require this new commit and abort operations.

Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Sasha Levin

ASoC: Intel: avs: Account for UID of ACPI device

2023-06-21T14:02:06+00:00

[ Upstream commit 836855100b87b4dd7a82546131779dc255c18b67 ]

Configurations with multiple codecs attached to the platform are
supported but only if each from the set is different. Add new field
representing the 'Unique ID' so that codecs that share Vendor and Part
IDs can be differentiated and thus enabling support for such
configurations.

Signed-off-by: Cezary Rojewski 
Signed-off-by: Amadeusz Sławiński 
Link: https://lore.kernel.org/r/20230519201711.4073845-6-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown 
Signed-off-by: Sasha Levin

ASoC: soc-pcm: test if a BE can be prepared

2023-06-21T14:02:06+00:00

[ Upstream commit e123036be377ddf628226a7c6d4f9af5efd113d3 ]

In the BE hw_params configuration, the existing code checks if any of the
existing FEs are prepared, running, paused or suspended - and skips the
configuration in those cases. This allows multiple calls of hw_params
which the ALSA state machine supports.

This check is not handled for the prepare stage, which can lead to the
same BE being prepared multiple times. This patch adds a check similar to
that of the hw_params, with the main difference being that the suspended
state is allowed: the ALSA state machine allows a transition from
suspended to prepared with hw_params skipped.

This problem was detected on Intel IPC4/SoundWire devices, where the BE
dailink .prepare stage is used to configure the SoundWire stream with a
bank switch. Multiple .prepare calls lead to conflicts with the .trigger
operation with IPC4 configurations. This problem was not detected earlier
on Intel devices, HDaudio BE dailinks detect that the link is already
prepared and skip the configuration, and for IPC3 devices there is no BE
trigger.

Link: https://github.com/thesofproject/sof/issues/7596
Signed-off-by: Ranjani Sridharan