linux-stable.git/include, branch v6.1.68

hugetlb: fix null-ptr-deref in hugetlb_vma_lock_write

2023-12-13T17:39:20+00:00

commit 187da0f8250aa94bd96266096aef6f694e0b4cd2 upstream.

The routine __vma_private_lock tests for the existence of a reserve map
associated with a private hugetlb mapping.  A pointer to the reserve map
is in vma->vm_private_data.  __vma_private_lock was checking the pointer
for NULL.  However, it is possible that the low bits of the pointer could
be used as flags.  In such instances, vm_private_data is not NULL and not
a valid pointer.  This results in the null-ptr-deref reported by syzbot:

general protection fault, probably for non-canonical address 0xdffffc000000001d:
 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000000e8-0x00000000000000ef]
CPU: 0 PID: 5048 Comm: syz-executor139 Not tainted 6.6.0-rc7-syzkaller-00142-g88
8cf78c29e2 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 1
0/09/2023
RIP: 0010:__lock_acquire+0x109/0x5de0 kernel/locking/lockdep.c:5004
...
Call Trace:
 
 lock_acquire kernel/locking/lockdep.c:5753 [inline]
 lock_acquire+0x1ae/0x510 kernel/locking/lockdep.c:5718
 down_write+0x93/0x200 kernel/locking/rwsem.c:1573
 hugetlb_vma_lock_write mm/hugetlb.c:300 [inline]
 hugetlb_vma_lock_write+0xae/0x100 mm/hugetlb.c:291
 __hugetlb_zap_begin+0x1e9/0x2b0 mm/hugetlb.c:5447
 hugetlb_zap_begin include/linux/hugetlb.h:258 [inline]
 unmap_vmas+0x2f4/0x470 mm/memory.c:1733
 exit_mmap+0x1ad/0xa60 mm/mmap.c:3230
 __mmput+0x12a/0x4d0 kernel/fork.c:1349
 mmput+0x62/0x70 kernel/fork.c:1371
 exit_mm kernel/exit.c:567 [inline]
 do_exit+0x9ad/0x2a20 kernel/exit.c:861
 __do_sys_exit kernel/exit.c:991 [inline]
 __se_sys_exit kernel/exit.c:989 [inline]
 __x64_sys_exit+0x42/0x50 kernel/exit.c:989
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

Mask off low bit flags before checking for NULL pointer.  In addition, the
reserve map only 'belongs' to the OWNER (parent in parent/child
relationships) so also check for the OWNER flag.

Link: https://lkml.kernel.org/r/20231114012033.259600-1-mike.kravetz@oracle.com
Reported-by: syzbot+6ada951e7c0f7bc8a71e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-mm/00000000000078d1e00608d7878b@google.com/
Fixes: bf4916922c60 ("hugetlbfs: extend hugetlb_vma_lock to private VMAs")
Signed-off-by: Mike Kravetz 
Reviewed-by: Rik van Riel 
Cc: Edward Adam Davis 
Cc: Muchun Song 
Cc: Nathan Chancellor 
Cc: Nick Desaulniers 
Cc: Tom Rix 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Greg Kroah-Hartman

kprobes: consistent rcu api usage for kretprobe holder

2023-12-13T17:39:17+00:00

commit d839a656d0f3caca9f96e9bf912fd394ac6a11bc upstream.

It seems that the pointer-to-kretprobe "rp" within the kretprobe_holder is
RCU-managed, based on the (non-rethook) implementation of get_kretprobe().
The thought behind this patch is to make use of the RCU API where possible
when accessing this pointer so that the needed barriers are always in place
and to self-document the code.

The __rcu annotation to "rp" allows for sparse RCU checking. Plain writes
done to the "rp" pointer are changed to make use of the RCU macro for
assignment. For the single read, the implementation of get_kretprobe()
is simplified by making use of an RCU macro which accomplishes the same,
but note that the log warning text will be more generic.

I did find that there is a difference in assembly generated between the
usage of the RCU macros vs without. For example, on arm64, when using
rcu_assign_pointer(), the corresponding store instruction is a
store-release (STLR) which has an implicit barrier. When normal assignment
is done, a regular store (STR) is found. In the macro case, this seems to
be a result of rcu_assign_pointer() using smp_store_release() when the
value to write is not NULL.

Link: https://lore.kernel.org/all/20231122132058.3359-1-inwardvessel@gmail.com/

Fixes: d741bf41d7c7 ("kprobes: Remove kretprobe hash")
Cc: stable@vger.kernel.org
Signed-off-by: JP Kobryn 
Acked-by: Masami Hiramatsu (Google) 
Signed-off-by: Masami Hiramatsu (Google) 
Signed-off-by: Greg Kroah-Hartman

rethook: Use __rcu pointer for rethook::handler

2023-12-13T17:39:17+00:00

commit a1461f1fd6cfdc4b8917c9d4a91e92605d1f28dc upstream.

Since the rethook::handler is an RCU-maganged pointer so that it will
notice readers the rethook is stopped (unregistered) or not, it should
be an __rcu pointer and use appropriate functions to be accessed. This
will use appropriate memory barrier when accessing it. OTOH,
rethook::data is never changed, so we don't need to check it in
get_kretprobe().

NOTE: To avoid sparse warning, rethook::handler is defined by a raw
function pointer type with __rcu instead of rethook_handler_t.

Link: https://lore.kernel.org/all/170126066201.398836.837498688669005979.stgit@devnote2/

Fixes: 54ecbe6f1ed5 ("rethook: Add a generic return hook")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot 
Closes: https://lore.kernel.org/oe-kbuild-all/202311241808.rv9ceuAh-lkp@intel.com/
Tested-by: JP Kobryn 
Signed-off-by: Masami Hiramatsu (Google) 
Signed-off-by: Greg Kroah-Hartman

iommu: Avoid more races around device probe

2023-12-13T17:39:17+00:00

commit a2e7e59a94269484a83386972ca07c22fd188854 upstream.

It turns out there are more subtle races beyond just the main part of
__iommu_probe_device() itself running in parallel - the dev_iommu_free()
on the way out of an unsuccessful probe can still manage to trip up
concurrent accesses to a device's fwspec. Thus, extend the scope of
iommu_probe_device_lock() to also serialise fwspec creation and initial
retrieval.

Reported-by: Zhenhua Huang 
Link: https://lore.kernel.org/linux-iommu/e2e20e1c-6450-4ac5-9804-b0000acdf7de@quicinc.com/
Fixes: 01657bc14a39 ("iommu: Avoid races around device probe")
Signed-off-by: Robin Murphy 
Acked-by: Greg Kroah-Hartman 
Reviewed-by: André Draszik 
Tested-by: André Draszik 
Link: https://lore.kernel.org/r/16f433658661d7cadfea51e7c65da95826112a2b.1700071477.git.robin.murphy@arm.com
Cc: stable@vger.kernel.org
Signed-off-by: Joerg Roedel 
Signed-off-by: Robin Murphy 
Signed-off-by: Greg Kroah-Hartman

RDMA/core: Fix umem iterator when PAGE_SIZE is greater then HCA pgsz

2023-12-13T17:39:15+00:00

[ Upstream commit 4fbc3a52cd4d14de3793f4b2c721d7306ea84cf9 ]

64k pages introduce the situation in this diagram when the HCA 4k page
size is being used:

 +-------------------------------------------+ <--- 64k aligned VA
 |                                           |
 |              HCA 4k page                  |
 |                                           |
 +-------------------------------------------+
 |                   o                       |
 |                                           |
 |                   o                       |
 |                                           |
 |                   o                       |
 +-------------------------------------------+
 |                                           |
 |              HCA 4k page                  |
 |                                           |
 +-------------------------------------------+ <--- Live HCA page
 |OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO| <--- offset
 |                                           | <--- VA
 |                MR data                    |
 +-------------------------------------------+
 |                                           |
 |              HCA 4k page                  |
 |                                           |
 +-------------------------------------------+
 |                   o                       |
 |                                           |
 |                   o                       |
 |                                           |
 |                   o                       |
 +-------------------------------------------+
 |                                           |
 |              HCA 4k page                  |
 |                                           |
 +-------------------------------------------+

The VA addresses are coming from rdma-core in this diagram can be
arbitrary, but for 64k pages, the VA may be offset by some number of HCA
4k pages and followed by some number of HCA 4k pages.

The current iterator doesn't account for either the preceding 4k pages or
the following 4k pages.

Fix the issue by extending the ib_block_iter to contain the number of DMA
pages like comment [1] says and by using __sg_advance to start the
iterator at the first live HCA page.

The changes are contained in a parallel set of iterator start and next
functions that are umem aware and specific to umem since there is one user
of the rdma_for_each_block() without umem.

These two fixes prevents the extra pages before and after the user MR
data.

Fix the preceding pages by using the __sq_advance field to start at the
first 4k page containing MR data.

Fix the following pages by saving the number of pgsz blocks in the
iterator state and downcounting on each next.

This fix allows for the elimination of the small page crutch noted in the
Fixes.

Fixes: 10c75ccb54e4 ("RDMA/umem: Prevent small pages from being returned by ib_umem_find_best_pgsz()")
Link: https://lore.kernel.org/r/20231129202143.1434-2-shiraz.saleem@intel.com
Signed-off-by: Mike Marciniszyn 
Signed-off-by: Shiraz Saleem 
Reviewed-by: Jason Gunthorpe 
Signed-off-by: Jason Gunthorpe 
Signed-off-by: Sasha Levin

drop_monitor: Require 'CAP_SYS_ADMIN' when joining "events" group

2023-12-13T17:39:12+00:00

[ Upstream commit e03781879a0d524ce3126678d50a80484a513c4b ]

The "NET_DM" generic netlink family notifies drop locations over the
"events" multicast group. This is problematic since by default generic
netlink allows non-root users to listen to these notifications.

Fix by adding a new field to the generic netlink multicast group
structure that when set prevents non-root users or root without the
'CAP_SYS_ADMIN' capability (in the user namespace owning the network
namespace) from joining the group. Set this field for the "events"
group. Use 'CAP_SYS_ADMIN' rather than 'CAP_NET_ADMIN' because of the
nature of the information that is shared over this group.

Note that the capability check in this case will always be performed
against the initial user namespace since the family is not netns aware
and only operates in the initial network namespace.

A new field is added to the structure rather than using the "flags"
field because the existing field uses uAPI flags and it is inappropriate
to add a new uAPI flag for an internal kernel check. In net-next we can
rework the "flags" field to use internal flags and fold the new field
into it. But for now, in order to reduce the amount of changes, add a
new field.

Since the information can only be consumed by root, mark the control
plane operations that start and stop the tracing as root-only using the
'GENL_ADMIN_PERM' flag.

Tested using [1].

Before:

 # capsh -- -c ./dm_repo
 # capsh --drop=cap_sys_admin -- -c ./dm_repo

After:

 # capsh -- -c ./dm_repo
 # capsh --drop=cap_sys_admin -- -c ./dm_repo
 Failed to join "events" multicast group

[1]
 $ cat dm.c
 #include 
 #include 
 #include 
 #include 

 int main(int argc, char **argv)
 {
 	struct nl_sock *sk;
 	int grp, err;

 	sk = nl_socket_alloc();
 	if (!sk) {
 		fprintf(stderr, "Failed to allocate socket\n");
 		return -1;
 	}

 	err = genl_connect(sk);
 	if (err) {
 		fprintf(stderr, "Failed to connect socket\n");
 		return err;
 	}

 	grp = genl_ctrl_resolve_grp(sk, "NET_DM", "events");
 	if (grp < 0) {
 		fprintf(stderr,
 			"Failed to resolve \"events\" multicast group\n");
 		return grp;
 	}

 	err = nl_socket_add_memberships(sk, grp, NFNLGRP_NONE);
 	if (err) {
 		fprintf(stderr, "Failed to join \"events\" multicast group\n");
 		return err;
 	}

 	return 0;
 }
 $ gcc -I/usr/include/libnl3 -lnl-3 -lnl-genl-3 -o dm_repo dm.c

Fixes: 9a8afc8d3962 ("Network Drop Monitor: Adding drop monitor implementation & Netlink protocol")
Reported-by: "The UK's National Cyber Security Centre (NCSC)" 
Signed-off-by: Ido Schimmel 
Reviewed-by: Jacob Keller 
Reviewed-by: Jiri Pirko 
Link: https://lore.kernel.org/r/20231206213102.1824398-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

netfilter: nft_exthdr: add boolean DCCP option matching

2023-12-13T17:39:10+00:00

[ Upstream commit b9f9a485fb0eb80b0e2b90410b28cbb9b0e85687 ]

The xt_dccp iptables module supports the matching of DCCP packets based
on the presence or absence of DCCP options.  Extend nft_exthdr to add
this functionality to nftables.

Link: https://bugzilla.netfilter.org/show_bug.cgi?id=930
Signed-off-by: Jeremy Sowden 
Signed-off-by: Florian Westphal 
Stable-dep-of: 63331e37fb22 ("netfilter: nf_tables: fix 'exist' matching on bigendian arches")
Signed-off-by: Sasha Levin

tcp: fix mid stream window clamp.

2023-12-13T17:39:09+00:00

[ Upstream commit 58d3aade20cdddbac6c9707ac0f3f5f8c1278b74 ]

After the blamed commit below, if the user-space application performs
window clamping when tp->rcv_wnd is 0, the TCP socket will never be
able to announce a non 0 receive window, even after completely emptying
the receive buffer and re-setting the window clamp to higher values.

Refactor tcp_set_window_clamp() to address the issue: when the user
decreases the current clamp value, set rcv_ssthresh according to the
same logic used at buffer initialization, but ensuring reserved mem
provisioning.

To avoid code duplication factor-out the relevant bits from
tcp_adjust_rcv_ssthresh() in a new helper and reuse it in the above
scenario.

When increasing the clamp value, give the rcv_ssthresh a chance to grow
according to previously implemented heuristic.

Fixes: 3aa7857fe1d7 ("tcp: enable mid stream window clamp")
Reported-by: David Gibson 
Reported-by: Stefano Brivio 
Signed-off-by: Paolo Abeni 
Reviewed-by: Eric Dumazet 
Link: https://lore.kernel.org/r/705dad54e6e6e9a010e571bf58e0b35a8ae70503.1701706073.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

net: stmmac: fix FPE events losing

2023-12-13T17:39:08+00:00

[ Upstream commit 37e4b8df27bc68340f3fc80dbb27e3549c7f881c ]

The status bits of register MAC_FPE_CTRL_STS are clear on read. Using
32-bit read for MAC_FPE_CTRL_STS in dwmac5_fpe_configure() and
dwmac5_fpe_send_mpacket() clear the status bits. Then the stmmac interrupt
handler missing FPE event status and leads to FPE handshaking failure and
retries.
To avoid clear status bits of MAC_FPE_CTRL_STS in dwmac5_fpe_configure()
and dwmac5_fpe_send_mpacket(), add fpe_csr to stmmac_fpe_cfg structure to
cache the control bits of MAC_FPE_CTRL_STS and to avoid reading
MAC_FPE_CTRL_STS in those methods.

Fixes: 5a5586112b92 ("net: stmmac: support FPE link partner hand-shaking procedure")
Reviewed-by: Serge Semin 
Signed-off-by: Jianheng Zhang 
Link: https://lore.kernel.org/r/CY5PR12MB637225A7CF529D5BE0FBE59CBF81A@CY5PR12MB6372.namprd12.prod.outlook.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

hrtimers: Push pending hrtimers away from outgoing CPU earlier

2023-12-13T17:39:03+00:00

[ Upstream commit 5c0930ccaad5a74d74e8b18b648c5eb21ed2fe94 ]

2b8272ff4a70 ("cpu/hotplug: Prevent self deadlock on CPU hot-unplug")
solved the straight forward CPU hotplug deadlock vs. the scheduler
bandwidth timer. Yu discovered a more involved variant where a task which
has a bandwidth timer started on the outgoing CPU holds a lock and then
gets throttled. If the lock required by one of the CPU hotplug callbacks
the hotplug operation deadlocks because the unthrottling timer event is not
handled on the dying CPU and can only be recovered once the control CPU
reaches the hotplug state which pulls the pending hrtimers from the dead
CPU.

Solve this by pushing the hrtimers away from the dying CPU in the dying
callbacks. Nothing can queue a hrtimer on the dying CPU at that point because
all other CPUs spin in stop_machine() with interrupts disabled and once the
operation is finished the CPU is marked offline.

Reported-by: Yu Liao 
Signed-off-by: Thomas Gleixner 
Tested-by: Liu Tie 
Link: https://lore.kernel.org/r/87a5rphara.ffs@tglx
Signed-off-by: Sasha Levin