linux-stable.git/include, branch v5.4.97

net: sched: replaced invalid qdisc tree flush helper in qdisc_replace

2021-02-10T08:25:33+00:00

commit 938e0fcd3253efdef8924714158911286d08cfe1 upstream.

Commit e5f0e8f8e456 ("net: sched: introduce and use qdisc tree flush/purge helpers")
introduced qdisc tree flush/purge helpers, but erroneously used flush helper
instead of purge helper in qdisc_replace function.
This issue was found in our CI, that tests various qdisc setups by configuring
qdisc and sending data through it. Call of invalid helper sporadically leads
to corruption of vt_tree/cf_tree of hfsc_class that causes kernel oops:

 Oops: 0000 [#1] SMP PTI
 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.11.0-8f6859df #1
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014
 RIP: 0010:rb_insert_color+0x18/0x190
 Code: c3 31 c0 c3 0f 1f 40 00 66 2e 0f 1f 84 00 00 00 00 00 48 8b 07 48 85 c0 0f 84 05 01 00 00 48 8b 10 f6 c2 01 0f 85 34 01 00 00 <48> 8b 4a 08 49 89 d0 48 39 c1 74 7d 48 85 c9 74 32 f6 01 01 75 2d
 RSP: 0018:ffffc900000b8bb0 EFLAGS: 00010246
 RAX: ffff8881ef4c38b0 RBX: ffff8881d956e400 RCX: ffff8881ef4c38b0
 RDX: 0000000000000000 RSI: ffff8881d956f0a8 RDI: ffff8881d956e4b0
 RBP: 0000000000000000 R08: 000000d5c4e249da R09: 1600000000000000
 R10: ffffc900000b8be0 R11: ffffc900000b8b28 R12: 0000000000000001
 R13: 000000000000005a R14: ffff8881f0905000 R15: ffff8881f0387d00
 FS:  0000000000000000(0000) GS:ffff8881f8b00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000008 CR3: 00000001f4796004 CR4: 0000000000060ee0
 Call Trace:
  
  init_vf.isra.19+0xec/0x250 [sch_hfsc]
  hfsc_enqueue+0x245/0x300 [sch_hfsc]
  ? fib_rules_lookup+0x12a/0x1d0
  ? __dev_queue_xmit+0x4b6/0x930
  ? hfsc_delete_class+0x250/0x250 [sch_hfsc]
  __dev_queue_xmit+0x4b6/0x930
  ? ip6_finish_output2+0x24d/0x590
  ip6_finish_output2+0x24d/0x590
  ? ip6_output+0x6c/0x130
  ip6_output+0x6c/0x130
  ? __ip6_finish_output+0x110/0x110
  mld_sendpack+0x224/0x230
  mld_ifc_timer_expire+0x186/0x2c0
  ? igmp6_group_dropped+0x200/0x200
  call_timer_fn+0x2d/0x150
  run_timer_softirq+0x20c/0x480
  ? tick_sched_do_timer+0x60/0x60
  ? tick_sched_timer+0x37/0x70
  __do_softirq+0xf7/0x2cb
  irq_exit+0xa0/0xb0
  smp_apic_timer_interrupt+0x74/0x150
  apic_timer_interrupt+0xf/0x20
  

Fixes: e5f0e8f8e456 ("net: sched: introduce and use qdisc tree flush/purge helpers")
Signed-off-by: Alexander Ovechkin 
Reported-by: Alexander Kuznetsov 
Acked-by: Dmitry Monakhov 
Acked-by: Dmitry Yakunin 
Acked-by: Cong Wang 
Link: https://lore.kernel.org/r/20210201200049.299153-1-ovov@yandex-team.ru
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

mm: hugetlbfs: fix cannot migrate the fallocated HugeTLB page

2021-02-10T08:25:31+00:00

commit 585fc0d2871c9318c949fbf45b1f081edd489e96 upstream.

If a new hugetlb page is allocated during fallocate it will not be
marked as active (set_page_huge_active) which will result in a later
isolate_huge_page failure when the page migration code would like to
move that page.  Such a failure would be unexpected and wrong.

Only export set_page_huge_active, just leave clear_page_huge_active as
static.  Because there are no external users.

Link: https://lkml.kernel.org/r/20210115124942.46403-3-songmuchun@bytedance.com
Fixes: 70c3547e36f5 (hugetlbfs: add hugetlbfs_fallocate())
Signed-off-by: Muchun Song 
Acked-by: Michal Hocko 
Reviewed-by: Mike Kravetz 
Reviewed-by: Oscar Salvador 
Cc: David Hildenbrand 
Cc: Yang Shi 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

genirq/msi: Activate Multi-MSI early when MSI_FLAG_ACTIVATE_EARLY is set

2021-02-10T08:25:30+00:00

commit 4c457e8cb75eda91906a4f89fc39bde3f9a43922 upstream.

When MSI_FLAG_ACTIVATE_EARLY is set (which is the case for PCI),
__msi_domain_alloc_irqs() performs the activation of the interrupt (which
in the case of PCI results in the endpoint being programmed) as soon as the
interrupt is allocated.

But it appears that this is only done for the first vector, introducing an
inconsistent behaviour for PCI Multi-MSI.

Fix it by iterating over the number of vectors allocated to each MSI
descriptor. This is easily achieved by introducing a new
"for_each_msi_vector" iterator, together with a tiny bit of refactoring.

Fixes: f3b0946d629c ("genirq/msi: Make sure PCI MSIs are activated early")
Reported-by: Shameer Kolothum 
Signed-off-by: Marc Zyngier 
Signed-off-by: Thomas Gleixner 
Tested-by: Shameer Kolothum 
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210123122759.1781359-1-maz@kernel.org
Signed-off-by: Greg Kroah-Hartman

kthread: Extract KTHREAD_IS_PER_CPU

2021-02-07T14:35:49+00:00

[ Upstream commit ac687e6e8c26181a33270efd1a2e2241377924b0 ]

There is a need to distinguish geniune per-cpu kthreads from kthreads
that happen to have a single CPU affinity.

Geniune per-cpu kthreads are kthreads that are CPU affine for
correctness, these will obviously have PF_KTHREAD set, but must also
have PF_NO_SETAFFINITY set, lest userspace modify their affinity and
ruins things.

However, these two things are not sufficient, PF_NO_SETAFFINITY is
also set on other tasks that have their affinities controlled through
other means, like for instance workqueues.

Therefore another bit is needed; it turns out kthread_create_per_cpu()
already has such a bit: KTHREAD_IS_PER_CPU, which is used to make
kthread_park()/kthread_unpark() work correctly.

Expose this flag and remove the implicit setting of it from
kthread_create_on_cpu(); the io_uring usage of it seems dubious at
best.

Signed-off-by: Peter Zijlstra (Intel) 
Reviewed-by: Valentin Schneider 
Tested-by: Valentin Schneider 
Link: https://lkml.kernel.org/r/20210121103506.557620262@infradead.org
Signed-off-by: Sasha Levin

tcp: make TCP_USER_TIMEOUT accurate for zero window probes

2021-02-07T14:35:47+00:00

commit 344db93ae3ee69fc137bd6ed89a8ff1bf5b0db08 upstream.

The TCP_USER_TIMEOUT is checked by the 0-window probe timer. As the
timer has backoff with a max interval of about two minutes, the
actual timeout for TCP_USER_TIMEOUT can be off by up to two minutes.

In this patch the TCP_USER_TIMEOUT is made more accurate by taking it
into account when computing the timer value for the 0-window probes.

This patch is similar to and builds on top of the one that made
TCP_USER_TIMEOUT accurate for RTOs in commit b701a99e431d ("tcp: Add
tcp_clamp_rto_to_user_timeout() helper to improve accuracy").

Fixes: 9721e709fa68 ("tcp: simplify window probe aborting on USER_TIMEOUT")
Signed-off-by: Enke Chen 
Reviewed-by: Neal Cardwell 
Signed-off-by: Eric Dumazet 
Link: https://lore.kernel.org/r/20210122191306.GA99540@localhost.localdomain
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

tcp: fix TLP timer not set when CA_STATE changes from DISORDER to OPEN

2021-02-03T22:26:02+00:00

commit 62d9f1a6945ba69c125e548e72a36d203b30596e upstream.

Upon receiving a cumulative ACK that changes the congestion state from
Disorder to Open, the TLP timer is not set. If the sender is app-limited,
it can only wait for the RTO timer to expire and retransmit.

The reason for this is that the TLP timer is set before the congestion
state changes in tcp_ack(), so we delay the time point of calling
tcp_set_xmit_timer() until after tcp_fastretrans_alert() returns and
remove the FLAG_SET_XMIT_TIMER from ack_flag when the RACK reorder timer
is set.

This commit has two additional benefits:
1) Make sure to reset RTO according to RFC6298 when receiving ACK, to
avoid spurious RTO caused by RTO timer early expires.
2) Reduce the xmit timer reschedule once per ACK when the RACK reorder
timer is set.

Fixes: df92c8394e6e ("tcp: fix xmit timer to only be reset if data ACKed/SACKed")
Link: https://lore.kernel.org/netdev/1611311242-6675-1-git-send-email-yangpc@wangsu.com
Signed-off-by: Pengcheng Yang 
Acked-by: Neal Cardwell 
Acked-by: Yuchung Cheng 
Cc: Eric Dumazet 
Link: https://lore.kernel.org/r/1611464834-23030-1-git-send-email-yangpc@wangsu.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

iommu/vt-d: Don't dereference iommu_device if IOMMU_API is not built

2021-02-03T22:26:01+00:00

commit 9def3b1a07c41e21c68a0eb353e3e569fdd1d2b1 upstream.

Since commit c40aaaac1018 ("iommu/vt-d: Gracefully handle DMAR units
with no supported address widths") dmar.c needs struct iommu_device to
be selected. We can drop this dependency by not dereferencing struct
iommu_device if IOMMU_API is not selected and by reusing the information
stored in iommu->drhd->ignored instead.

This fixes the following build error when IOMMU_API is not selected:

drivers/iommu/dmar.c: In function ‘free_iommu’:
drivers/iommu/dmar.c:1139:41: error: ‘struct iommu_device’ has no member named ‘ops’
 1139 |  if (intel_iommu_enabled && iommu->iommu.ops) {
                                                ^

Fixes: c40aaaac1018 ("iommu/vt-d: Gracefully handle DMAR units with no supported address widths")
Signed-off-by: Bartosz Golaszewski 
Acked-by: Lu Baolu 
Acked-by: David Woodhouse 
Link: https://lore.kernel.org/r/20201013073055.11262-1-brgl@bgdev.pl
Signed-off-by: Joerg Roedel 
[ - context change due to moving drivers/iommu/dmar.c to
    drivers/iommu/intel/dmar.c
  - set the drhr in the iommu like in upstream commit b1012ca8dc4f
    ("iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommu") ]
Signed-off-by: Filippo Sironi 
Signed-off-by: Greg Kroah-Hartman

ICMPv6: Add ICMPv6 Parameter Problem, code 3 definition

2021-02-03T22:25:55+00:00

commit b59e286be280fa3c2e94a0716ddcee6ba02bc8ba upstream.

Based on RFC7112, Section 6:

   IANA has added the following "Type 4 - Parameter Problem" message to
   the "Internet Control Message Protocol version 6 (ICMPv6) Parameters"
   registry:

      CODE     NAME/DESCRIPTION
       3       IPv6 First Fragment has incomplete IPv6 Header Chain

Signed-off-by: Hangbin Liu 
Signed-off-by: Jakub Kicinski 
Signed-off-by: Aviraj CJ 
Signed-off-by: Greg Kroah-Hartman

writeback: Drop I_DIRTY_TIME_EXPIRE

2021-01-30T12:54:11+00:00

commit 5fcd57505c002efc5823a7355e21f48dd02d5a51 upstream.

The only use of I_DIRTY_TIME_EXPIRE is to detect in
__writeback_single_inode() that inode got there because flush worker
decided it's time to writeback the dirty inode time stamps (either
because we are syncing or because of age). However we can detect this
directly in __writeback_single_inode() and there's no need for the
strange propagation with I_DIRTY_TIME_EXPIRE flag.

Reviewed-by: Christoph Hellwig 
Signed-off-by: Jan Kara 
Cc: Eric Biggers 
Signed-off-by: Greg Kroah-Hartman

tcp: fix TCP_USER_TIMEOUT with zero window

2021-01-27T10:47:55+00:00

commit 9d9b1ee0b2d1c9e02b2338c4a4b0a062d2d3edac upstream.

The TCP session does not terminate with TCP_USER_TIMEOUT when data
remain untransmitted due to zero window.

The number of unanswered zero-window probes (tcp_probes_out) is
reset to zero with incoming acks irrespective of the window size,
as described in tcp_probe_timer():

    RFC 1122 4.2.2.17 requires the sender to stay open indefinitely
    as long as the receiver continues to respond probes. We support
    this by default and reset icsk_probes_out with incoming ACKs.

This counter, however, is the wrong one to be used in calculating the
duration that the window remains closed and data remain untransmitted.
Thanks to Jonathan Maxwell  for diagnosing the
actual issue.

In this patch a new timestamp is introduced for the socket in order to
track the elapsed time for the zero-window probes that have not been
answered with any non-zero window ack.

Fixes: 9721e709fa68 ("tcp: simplify window probe aborting on USER_TIMEOUT")
Reported-by: William McCall 
Co-developed-by: Neal Cardwell 
Signed-off-by: Neal Cardwell 
Signed-off-by: Enke Chen 
Reviewed-by: Yuchung Cheng 
Reviewed-by: Eric Dumazet 
Link: https://lore.kernel.org/r/20210115223058.GA39267@localhost.localdomain
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman