linux-stable.git/include, branch v5.4.69

ata: make qc_prep return ata_completion_errors

2020-10-01T11:18:26+00:00

commit 95364f36701e62dd50eee91e1303187fd1a9f567 upstream.

In case a driver wants to return an error from qc_prep, return enum
ata_completion_errors. sata_mv is one of those drivers -- see the next
patch. Other drivers return the newly defined AC_ERR_OK.

[v2] use enum ata_completion_errors and AC_ERR_OK.

Signed-off-by: Jiri Slaby 
Cc: Jens Axboe 
Cc: linux-ide@vger.kernel.org
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

ata: define AC_ERR_OK

2020-10-01T11:18:25+00:00

commit 25937580a5065d6fbd92d9c8ebd47145ad80052e upstream.

Since we will return enum ata_completion_errors from qc_prep in the next
patch, let's define AC_ERR_OK to mark the OK status.

Signed-off-by: Jiri Slaby 
Cc: Jens Axboe 
Cc: linux-ide@vger.kernel.org
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

mm/gup: fix gup_fast with dynamic page table folding

2020-10-01T11:18:24+00:00

commit d3f7b1bb204099f2f7306318896223e8599bb6a2 upstream.

Currently to make sure that every page table entry is read just once
gup_fast walks perform READ_ONCE and pass pXd value down to the next
gup_pXd_range function by value e.g.:

  static int gup_pud_range(p4d_t p4d, unsigned long addr, unsigned long end,
                           unsigned int flags, struct page **pages, int *nr)
  ...
          pudp = pud_offset(&p4d, addr);

This function passes a reference on that local value copy to pXd_offset,
and might get the very same pointer in return.  This happens when the
level is folded (on most arches), and that pointer should not be
iterated.

On s390 due to the fact that each task might have different 5,4 or
3-level address translation and hence different levels folded the logic
is more complex and non-iteratable pointer to a local copy leads to
severe problems.

Here is an example of what happens with gup_fast on s390, for a task
with 3-level paging, crossing a 2 GB pud boundary:

  // addr = 0x1007ffff000, end = 0x10080001000
  static int gup_pud_range(p4d_t p4d, unsigned long addr, unsigned long end,
                           unsigned int flags, struct page **pages, int *nr)
  {
        unsigned long next;
        pud_t *pudp;

        // pud_offset returns &p4d itself (a pointer to a value on stack)
        pudp = pud_offset(&p4d, addr);
        do {
                // on second iteratation reading "random" stack value
                pud_t pud = READ_ONCE(*pudp);

                // next = 0x10080000000, due to PUD_SIZE/MASK != PGDIR_SIZE/MASK on s390
                next = pud_addr_end(addr, end);
                ...
        } while (pudp++, addr = next, addr != end); // pudp++ iterating over stack

        return 1;
  }

This happens since s390 moved to common gup code with commit
d1874a0c2805 ("s390/mm: make the pxd_offset functions more robust") and
commit 1a42010cdc26 ("s390/mm: convert to the generic
get_user_pages_fast code").

s390 tried to mimic static level folding by changing pXd_offset
primitives to always calculate top level page table offset in pgd_offset
and just return the value passed when pXd_offset has to act as folded.

What is crucial for gup_fast and what has been overlooked is that
PxD_SIZE/MASK and thus pXd_addr_end should also change correspondingly.
And the latter is not possible with dynamic folding.

To fix the issue in addition to pXd values pass original pXdp pointers
down to gup_pXd_range functions.  And introduce pXd_offset_lockless
helpers, which take an additional pXd entry value parameter.  This has
already been discussed in

  https://lkml.kernel.org/r/20190418100218.0a4afd51@mschwideX1

Fixes: 1a42010cdc26 ("s390/mm: convert to the generic get_user_pages_fast code")
Signed-off-by: Vasily Gorbik 
Signed-off-by: Andrew Morton 
Reviewed-by: Gerald Schaefer 
Reviewed-by: Alexander Gordeev 
Reviewed-by: Jason Gunthorpe 
Reviewed-by: Mike Rapoport 
Reviewed-by: John Hubbard 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Dave Hansen 
Cc: Russell King 
Cc: Catalin Marinas 
Cc: Will Deacon 
Cc: Michael Ellerman 
Cc: Benjamin Herrenschmidt 
Cc: Paul Mackerras 
Cc: Jeff Dike 
Cc: Richard Weinberger 
Cc: Dave Hansen 
Cc: Andy Lutomirski 
Cc: Thomas Gleixner 
Cc: Ingo Molnar 
Cc: Borislav Petkov 
Cc: Arnd Bergmann 
Cc: Andrey Ryabinin 
Cc: Heiko Carstens 
Cc: Christian Borntraeger 
Cc: Claudio Imbrenda 
Cc: 	[5.2+]
Link: https://lkml.kernel.org/r/patch.git-943f1e5dcff2.your-ad-here.call-01599856292-ext-8676@work.hours
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

kprobes: tracing/kprobes: Fix to kill kprobes on initmem after boot

2020-10-01T11:18:23+00:00

commit 82d083ab60c3693201c6f5c7a5f23a6ed422098d upstream.

Since kprobe_event= cmdline option allows user to put kprobes on the
functions in initmem, kprobe has to make such probes gone after boot.
Currently the probes on the init functions in modules will be handled
by module callback, but the kernel init text isn't handled.
Without this, kprobes may access non-exist text area to disable or
remove it.

Link: https://lkml.kernel.org/r/159972810544.428528.1839307531600646955.stgit@devnote2

Fixes: 970988e19eb0 ("tracing/kprobe: Add kprobe_event= boot parameter")
Cc: Jonathan Corbet 
Cc: Shuah Khan 
Cc: Randy Dunlap 
Cc: Ingo Molnar 
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu 
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Greg Kroah-Hartman

net: qed: Disable aRFS for NPAR and 100G

2020-10-01T11:18:18+00:00

[ Upstream commit 2d2fe8433796603091ac8ea235b9165ac5a85f9a ]

In CMT and NPAR the PF is unknown when the GFS block processes the
packet. Therefore cannot use searcher as it has a per PF database,
and thus ARFS must be disabled.

Fixes: d51e4af5c209 ("qed: aRFS infrastructure support")
Signed-off-by: Manish Chopra 
Signed-off-by: Igor Russkikh 
Signed-off-by: Michal Kalderon 
Signed-off-by: Dmitry Bogdanov 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

svcrdma: Fix backchannel return code

2020-10-01T11:18:01+00:00

[ Upstream commit ea740bd5f58e2912e74f401fd01a9d6aa985ca05 ]

Way back when I was writing the RPC/RDMA server-side backchannel
code, I misread the TCP backchannel reply handler logic. When
svc_tcp_recvfrom() successfully receives a backchannel reply, it
does not return -EAGAIN. It sets XPT_DATA and returns zero.

Update svc_rdma_recvfrom() to return zero. Here, XPT_DATA doesn't
need to be set again: it is set whenever a new message is received,
behind a spin lock in a single threaded context.

Also, if handling the cb reply is not successful, the message is
simply dropped. There's no special message framing to deal with as
there is in the TCP case.

Now that the handle_bc_reply() return value is ignored, I've removed
the dprintk call sites in the error exit of handle_bc_reply() in
favor of trace points in other areas that already report the error
cases.

Signed-off-by: Chuck Lever 
Signed-off-by: Sasha Levin

ALSA: hda: Skip controller resume if not needed

2020-10-01T11:17:54+00:00

[ Upstream commit c4c8dd6ef807663e42a5f04ea77cd62029eb99fa ]

The HD-audio controller does system-suspend and resume operations by
directly calling its helpers __azx_runtime_suspend() and
__azx_runtime_resume().  However, in general, we don't have to resume
always the device fully at the system resume; typically, if a device
has been runtime-suspended, we can leave it to runtime resume.

Usually for achieving this, the driver would call
pm_runtime_force_suspend() and pm_runtime_force_resume() pairs in the
system suspend and resume ops.  Unfortunately, this doesn't work for
the resume path in our case.  For handling the jack detection at the
system resume, a child codec device may need the (literally) forcibly
resume even if it's been runtime-suspended, and for that, the
controller device must be also resumed even if it's been suspended.

This patch is an attempt to improve the situation.  It replaces the
direct __azx_runtime_suspend()/_resume() calls with with
pm_runtime_force_suspend() and pm_runtime_force_resume() with a slight
trick as we've done for the codec side.  More exactly:

- azx_has_pm_runtime() check is dropped from azx_runtime_suspend() and
  azx_runtime_resume(), so that it can be properly executed from the
  system-suspend/resume path

- The WAKEEN handling depends on the card's power state now; it's set
  and cleared only for the runtime-suspend

- azx_resume() checks whether any codec may need the forcible resume
  beforehand.  If the forcible resume is required, it does temporary
  PM refcount up/down for actually triggering the runtime resume.

- A new helper function, hda_codec_need_resume(), is introduced for
  checking whether the codec needs a forcible runtime-resume, and the
  existing code is rewritten with that.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207043
Link: https://lore.kernel.org/r/20200413082034.25166-6-tiwai@suse.de
Signed-off-by: Takashi Iwai 
Signed-off-by: Sasha Levin

NFS: Fix races nfs_page_group_destroy() vs nfs_destroy_unlinked_subrequests()

2020-10-01T11:17:52+00:00

[ Upstream commit 08ca8b21f760c0ed5034a5c122092eec22ccf8f4 ]

When a subrequest is being detached from the subgroup, we want to
ensure that it is not holding the group lock, or in the process
of waiting for the group lock.

Fixes: 5b2b5187fa85 ("NFS: Fix nfs_page_group_destroy() and nfs_lock_and_join_requests() race cases")
Signed-off-by: Trond Myklebust 
Signed-off-by: Sasha Levin

PCI: Use ioremap(), not phys_to_virt() for platform ROM

2020-10-01T11:17:51+00:00

[ Upstream commit 72e0ef0e5f067fd991f702f0b2635d911d0cf208 ]

On some EFI systems, the video BIOS is provided by the EFI firmware.  The
boot stub code stores the physical address of the ROM image in pdev->rom.
Currently we attempt to access this pointer using phys_to_virt(), which
doesn't work with CONFIG_HIGHMEM.

On these systems, attempting to load the radeon module on a x86_32 kernel
can result in the following:

  BUG: unable to handle page fault for address: 3e8ed03c
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  *pde = 00000000
  Oops: 0000 [#1] PREEMPT SMP
  CPU: 0 PID: 317 Comm: systemd-udevd Not tainted 5.6.0-rc3-next-20200228 #2
  Hardware name: Apple Computer, Inc. MacPro1,1/Mac-F4208DC8, BIOS     MP11.88Z.005C.B08.0707021221 07/02/07
  EIP: radeon_get_bios+0x5ed/0xe50 [radeon]
  Code: 00 00 84 c0 0f 85 12 fd ff ff c7 87 64 01 00 00 00 00 00 00 8b 47 08 8b 55 b0 e8 1e 83 e1 d6 85 c0 74 1a 8b 55 c0 85 d2 74 13 <80> 38 55 75 0e 80 78 01 aa 0f 84 a4 03 00 00 8d 74 26 00 68 dc 06
  EAX: 3e8ed03c EBX: 00000000 ECX: 3e8ed03c EDX: 00010000
  ESI: 00040000 EDI: eec04000 EBP: eef3fc60 ESP: eef3fbe0
  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010206
  CR0: 80050033 CR2: 3e8ed03c CR3: 2ec77000 CR4: 000006d0
  Call Trace:
   r520_init+0x26/0x240 [radeon]
   radeon_device_init+0x533/0xa50 [radeon]
   radeon_driver_load_kms+0x80/0x220 [radeon]
   drm_dev_register+0xa7/0x180 [drm]
   radeon_pci_probe+0x10f/0x1a0 [radeon]
   pci_device_probe+0xd4/0x140

Fix the issue by updating all drivers which can access a platform provided
ROM. Instead of calling the helper function pci_platform_rom() which uses
phys_to_virt(), call ioremap() directly on the pdev->rom.

radeon_read_platform_bios() previously directly accessed an __iomem
pointer. Avoid this by calling memcpy_fromio() instead of kmemdup().

pci_platform_rom() now has no remaining callers, so remove it.

Link: https://lore.kernel.org/r/20200319021623.5426-1-mikel@mikelr.com
Signed-off-by: Mikel Rychliski 
Signed-off-by: Bjorn Helgaas 
Acked-by: Alex Deucher 
Signed-off-by: Sasha Levin

exec: Add exec_update_mutex to replace cred_guard_mutex

2020-10-01T11:17:47+00:00

[ Upstream commit eea9673250db4e854e9998ef9da6d4584857f0ea ]

The cred_guard_mutex is problematic as it is held over possibly
indefinite waits for userspace. The possible indefinite waits for
userspace that I have identified are: The cred_guard_mutex is held in
PTRACE_EVENT_EXIT waiting for the tracer. The cred_guard_mutex is
held over "put_user(0, tsk->clear_child_tid)" in exit_mm(). The
cred_guard_mutex is held over "get_user(futex_offset, ...") in
exit_robust_list. The cred_guard_mutex held over copy_strings.

The functions get_user and put_user can trigger a page fault which can
potentially wait indefinitely in the case of userfaultfd or if
userspace implements part of the page fault path.

In any of those cases the userspace process that the kernel is waiting
for might make a different system call that winds up taking the
cred_guard_mutex and result in deadlock.

Holding a mutex over any of those possibly indefinite waits for
userspace does not appear necessary. Add exec_update_mutex that will
just cover updating the process during exec where the permissions and
the objects pointed to by the task struct may be out of sync.

The plan is to switch the users of cred_guard_mutex to
exec_update_mutex one by one. This lets us move forward while still
being careful and not introducing any regressions.

Link: https://lore.kernel.org/lkml/20160921152946.GA24210@dhcp22.suse.cz/
Link: https://lore.kernel.org/lkml/AM6PR03MB5170B06F3A2B75EFB98D071AE4E60@AM6PR03MB5170.eurprd03.prod.outlook.com/
Link: https://lore.kernel.org/linux-fsdevel/20161102181806.GB1112@redhat.com/
Link: https://lore.kernel.org/lkml/20160923095031.GA14923@redhat.com/
Link: https://lore.kernel.org/lkml/20170213141452.GA30203@redhat.com/
Ref: 45c1a159b85b ("Add PTRACE_O_TRACEVFORKDONE and PTRACE_O_TRACEEXIT facilities.")
Ref: 456f17cd1a28 ("[PATCH] user-vm-unlock-2.5.31-A2")
Reviewed-by: Kirill Tkhai
Signed-off-by: "Eric W. Biederman"
Signed-off-by: Bernd Edlinger
Signed-off-by: Eric W. Biederman
Signed-off-by: Sasha Levin