linux-stable.git/include, branch v5.4.55 Linux kernel stable tree tcp: allow at most one TLP probe per flight 2020-07-31T16:39:31+00:00 Yuchung Cheng ycheng@google.com 2020-07-23T19:00:06+00:00 182ffc66456b20530def3b2d4f6b9a07545ac475 [ Upstream commit 76be93fc0702322179bb0ea87295d820ee46ad14 ] Previously TLP may send multiple probes of new data in one flight. This happens when the sender is cwnd limited. After the initial TLP containing new data is sent, the sender receives another ACK that acks partial inflight. It may re-arm another TLP timer to send more, if no further ACK returns before the next TLP timeout (PTO) expires. The sender may send in theory a large amount of TLP until send queue is depleted. This only happens if the sender sees such irregular uncommon ACK pattern. But it is generally undesirable behavior during congestion especially. The original TLP design restrict only one TLP probe per inflight as published in "Reducing Web Latency: the Virtue of Gentle Aggression", SIGCOMM 2013. This patch changes TLP to send at most one probe per inflight. Note that if the sender is app-limited, TLP retransmits old data and did not have this issue. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 76be93fc0702322179bb0ea87295d820ee46ad14 ]

Previously TLP may send multiple probes of new data in one
flight. This happens when the sender is cwnd limited. After the
initial TLP containing new data is sent, the sender receives another
ACK that acks partial inflight.  It may re-arm another TLP timer
to send more, if no further ACK returns before the next TLP timeout
(PTO) expires. The sender may send in theory a large amount of TLP
until send queue is depleted. This only happens if the sender sees
such irregular uncommon ACK pattern. But it is generally undesirable
behavior during congestion especially.

The original TLP design restrict only one TLP probe per inflight as
published in "Reducing Web Latency: the Virtue of Gentle Aggression",
SIGCOMM 2013. This patch changes TLP to send at most one probe
per inflight.

Note that if the sender is app-limited, TLP retransmits old data
and did not have this issue.

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dm integrity: fix integrity recalculation that is improperly skipped 2020-07-29T08:18:45+00:00 Mikulas Patocka mpatocka@redhat.com 2020-07-23T14:42:09+00:00 6d4448ca54bc8831f983e51aed8a11f6c71aea35 commit 5df96f2b9f58a5d2dc1f30fe7de75e197f2c25f2 upstream. Commit adc0daad366b62ca1bce3e2958a40b0b71a8b8b3 ("dm: report suspended device during destroy") broke integrity recalculation. The problem is dm_suspended() returns true not only during suspend, but also during resume. So this race condition could occur: 1. dm_integrity_resume calls queue_work(ic->recalc_wq, &ic->recalc_work) 2. integrity_recalc (&ic->recalc_work) preempts the current thread 3. integrity_recalc calls if (unlikely(dm_suspended(ic->ti))) goto unlock_ret; 4. integrity_recalc exits and no recalculating is done. To fix this race condition, add a function dm_post_suspending that is only true during the postsuspend phase and use it instead of dm_suspended(). Signed-off-by: Mikulas Patocka <mpatocka redhat com> Fixes: adc0daad366b ("dm: report suspended device during destroy") Cc: stable vger kernel org # v4.18+ Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5df96f2b9f58a5d2dc1f30fe7de75e197f2c25f2 upstream.

Commit adc0daad366b62ca1bce3e2958a40b0b71a8b8b3 ("dm: report suspended
device during destroy") broke integrity recalculation.

The problem is dm_suspended() returns true not only during suspend,
but also during resume. So this race condition could occur:
1. dm_integrity_resume calls queue_work(ic->recalc_wq, &ic->recalc_work)
2. integrity_recalc (&ic->recalc_work) preempts the current thread
3. integrity_recalc calls if (unlikely(dm_suspended(ic->ti))) goto unlock_ret;
4. integrity_recalc exits and no recalculating is done.

To fix this race condition, add a function dm_post_suspending that is
only true during the postsuspend phase and use it instead of
dm_suspended().

Signed-off-by: Mikulas Patocka <mpatocka redhat com>
Fixes: adc0daad366b ("dm: report suspended device during destroy")
Cc: stable vger kernel org # v4.18+
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ASoC: rt5670: Add new gpio1_is_ext_spk_en quirk and enable it on the Lenovo Miix 2 10 2020-07-29T08:18:45+00:00 Hans de Goede hdegoede@redhat.com 2020-06-28T15:52:28+00:00 8f64dc9e1d49909e7c3429ed27ee00e5d1e19664 commit 85ca6b17e2bb96b19caac3b02c003d670b66de96 upstream. The Lenovo Miix 2 10 has a keyboard dock with extra speakers in the dock. Rather then the ACL5672's GPIO1 pin being used as IRQ to the CPU, it is actually used to enable the amplifier for these speakers (the IRQ to the CPU comes directly from the jack-detect switch). Add a quirk for having an ext speaker-amplifier enable pin on GPIO1 and replace the Lenovo Miix 2 10's dmi_system_id table entry's wrong GPIO_DEV quirk (which needs to be renamed to GPIO1_IS_IRQ) with the new RT5670_GPIO1_IS_EXT_SPK_EN quirk, so that we enable the external speaker-amplifier as necessary. Also update the ident field for the dmi_system_id table entry, the Miix models are not Thinkpads. Fixes: 67e03ff3f32f ("ASoC: codecs: rt5670: add Thinkpad Tablet 10 quirk") Signed-off-by: Hans de Goede <hdegoede@redhat.com> BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786723 Link: https://lore.kernel.org/r/20200628155231.71089-4-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 85ca6b17e2bb96b19caac3b02c003d670b66de96 upstream.

The Lenovo Miix 2 10 has a keyboard dock with extra speakers in the dock.
Rather then the ACL5672's GPIO1 pin being used as IRQ to the CPU, it is
actually used to enable the amplifier for these speakers
(the IRQ to the CPU comes directly from the jack-detect switch).

Add a quirk for having an ext speaker-amplifier enable pin on GPIO1
and replace the Lenovo Miix 2 10's dmi_system_id table entry's wrong
GPIO_DEV quirk (which needs to be renamed to GPIO1_IS_IRQ) with the
new RT5670_GPIO1_IS_EXT_SPK_EN quirk, so that we enable the external
speaker-amplifier as necessary.

Also update the ident field for the dmi_system_id table entry, the
Miix models are not Thinkpads.

Fixes: 67e03ff3f32f ("ASoC: codecs: rt5670: add Thinkpad Tablet 10 quirk")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786723
Link: https://lore.kernel.org/r/20200628155231.71089-4-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
x86, vmlinux.lds: Page-align end of ..page_aligned sections 2020-07-29T08:18:45+00:00 Joerg Roedel jroedel@suse.de 2020-07-21T09:34:48+00:00 697bd3e4aa4ba9c3ec10a4b43192b58b12e580dc commit de2b41be8fcccb2f5b6c480d35df590476344201 upstream. On x86-32 the idt_table with 256 entries needs only 2048 bytes. It is page-aligned, but the end of the .bss..page_aligned section is not guaranteed to be page-aligned. As a result, objects from other .bss sections may end up on the same 4k page as the idt_table, and will accidentially get mapped read-only during boot, causing unexpected page-faults when the kernel writes to them. This could be worked around by making the objects in the page aligned sections page sized, but that's wrong. Explicit sections which store only page aligned objects have an implicit guarantee that the object is alone in the page in which it is placed. That works for all objects except the last one. That's inconsistent. Enforcing page sized objects for these sections would wreckage memory sanitizers, because the object becomes artificially larger than it should be and out of bound access becomes legit. Align the end of the .bss..page_aligned and .data..page_aligned section on page-size so all objects places in these sections are guaranteed to have their own page. [ tglx: Amended changelog ] Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20200721093448.10417-1-joro@8bytes.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit de2b41be8fcccb2f5b6c480d35df590476344201 upstream.

On x86-32 the idt_table with 256 entries needs only 2048 bytes. It is
page-aligned, but the end of the .bss..page_aligned section is not
guaranteed to be page-aligned.

As a result, objects from other .bss sections may end up on the same 4k
page as the idt_table, and will accidentially get mapped read-only during
boot, causing unexpected page-faults when the kernel writes to them.

This could be worked around by making the objects in the page aligned
sections page sized, but that's wrong.

Explicit sections which store only page aligned objects have an implicit
guarantee that the object is alone in the page in which it is placed. That
works for all objects except the last one. That's inconsistent.

Enforcing page sized objects for these sections would wreckage memory
sanitizers, because the object becomes artificially larger than it should
be and out of bound access becomes legit.

Align the end of the .bss..page_aligned and .data..page_aligned section on
page-size so all objects places in these sections are guaranteed to have
their own page.

[ tglx: Amended changelog ]

Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200721093448.10417-1-joro@8bytes.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
io-mapping: indicate mapping failure 2020-07-29T08:18:44+00:00 Michael J. Ruhl michael.j.ruhl@intel.com 2020-07-24T04:15:46+00:00 615f44e047929035f168b165efa6a855ac8deaf9 commit e0b3e0b1a04367fc15c07f44e78361545b55357c upstream. The !ATOMIC_IOMAP version of io_maping_init_wc will always return success, even when the ioremap fails. Since the ATOMIC_IOMAP version returns NULL when the init fails, and callers check for a NULL return on error this is unexpected. During a device probe, where the ioremap failed, a crash can look like this: BUG: unable to handle page fault for address: 0000000000210000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page Oops: 0002 [#1] PREEMPT SMP CPU: 0 PID: 177 Comm: RIP: 0010:fill_page_dma [i915] gen8_ppgtt_create [i915] i915_ppgtt_create [i915] intel_gt_init [i915] i915_gem_init [i915] i915_driver_probe [i915] pci_device_probe really_probe driver_probe_device The remap failure occurred much earlier in the probe. If it had been propagated, the driver would have exited with an error. Return NULL on ioremap failure. [akpm@linux-foundation.org: detect ioremap_wc() errors earlier] Fixes: cafaf14a5d8f ("io-mapping: Always create a struct to hold metadata about the io-mapping") Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200721171936.81563-1-michael.j.ruhl@intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e0b3e0b1a04367fc15c07f44e78361545b55357c upstream.

The !ATOMIC_IOMAP version of io_maping_init_wc will always return
success, even when the ioremap fails.

Since the ATOMIC_IOMAP version returns NULL when the init fails, and
callers check for a NULL return on error this is unexpected.

During a device probe, where the ioremap failed, a crash can look like
this:

    BUG: unable to handle page fault for address: 0000000000210000
     #PF: supervisor write access in kernel mode
     #PF: error_code(0x0002) - not-present page
     Oops: 0002 [#1] PREEMPT SMP
     CPU: 0 PID: 177 Comm:
     RIP: 0010:fill_page_dma [i915]
       gen8_ppgtt_create [i915]
       i915_ppgtt_create [i915]
       intel_gt_init [i915]
       i915_gem_init [i915]
       i915_driver_probe [i915]
       pci_device_probe
       really_probe
       driver_probe_device

The remap failure occurred much earlier in the probe.  If it had been
propagated, the driver would have exited with an error.

Return NULL on ioremap failure.

[akpm@linux-foundation.org: detect ioremap_wc() errors earlier]

Fixes: cafaf14a5d8f ("io-mapping: Always create a struct to hold metadata about the io-mapping")
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200721171936.81563-1-michael.j.ruhl@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
asm-generic/mmiowb: Allow mmiowb_set_pending() when preemptible() 2020-07-29T08:18:40+00:00 Will Deacon will@kernel.org 2020-07-16T11:28:16+00:00 0821295b23cc8a1a08888fcea4311441ccf08597 [ Upstream commit bd024e82e4cd95c7f1a475a55f99871936c2b2db ] Although mmiowb() is concerned only with serialising MMIO writes occuring in contexts where a spinlock is held, the call to mmiowb_set_pending() from the MMIO write accessors can occur in preemptible contexts, such as during driver probe() functions where ordering between CPUs is not usually a concern, assuming that the task migration path provides the necessary ordering guarantees. Unfortunately, the default implementation of mmiowb_set_pending() is not preempt-safe, as it makes use of a a per-cpu variable to track its internal state. This has been reported to generate the following splat on riscv: | BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1 | caller is regmap_mmio_write32le+0x1c/0x46 | CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.8.0-rc3-hfu+ #1 | Call Trace: | walk_stackframe+0x0/0x7a | dump_stack+0x6e/0x88 | regmap_mmio_write32le+0x18/0x46 | check_preemption_disabled+0xa4/0xaa | regmap_mmio_write32le+0x18/0x46 | regmap_mmio_write+0x26/0x44 | regmap_write+0x28/0x48 | sifive_gpio_probe+0xc0/0x1da Although it's possible to fix the driver in this case, other splats have been seen from other drivers, including the infamous 8250 UART, and so it's better to address this problem in the mmiowb core itself. Fix mmiowb_set_pending() by using the raw_cpu_ptr() to get at the mmiowb state and then only updating the 'mmiowb_pending' field if we are not preemptible (i.e. we have a non-zero nesting count). Cc: Arnd Bergmann <arnd@arndb.de> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Guo Ren <guoren@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Reported-by: Palmer Dabbelt <palmer@dabbelt.com> Reported-by: Emil Renner Berthing <kernel@esmil.dk> Tested-by: Emil Renner Berthing <kernel@esmil.dk> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> Link: https://lore.kernel.org/r/20200716112816.7356-1-will@kernel.org Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit bd024e82e4cd95c7f1a475a55f99871936c2b2db ]

Although mmiowb() is concerned only with serialising MMIO writes occuring
in contexts where a spinlock is held, the call to mmiowb_set_pending()
from the MMIO write accessors can occur in preemptible contexts, such
as during driver probe() functions where ordering between CPUs is not
usually a concern, assuming that the task migration path provides the
necessary ordering guarantees.

Unfortunately, the default implementation of mmiowb_set_pending() is not
preempt-safe, as it makes use of a a per-cpu variable to track its
internal state. This has been reported to generate the following splat
on riscv:

 | BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1
 | caller is regmap_mmio_write32le+0x1c/0x46
 | CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.8.0-rc3-hfu+ #1
 | Call Trace:
 |  walk_stackframe+0x0/0x7a
 |  dump_stack+0x6e/0x88
 |  regmap_mmio_write32le+0x18/0x46
 |  check_preemption_disabled+0xa4/0xaa
 |  regmap_mmio_write32le+0x18/0x46
 |  regmap_mmio_write+0x26/0x44
 |  regmap_write+0x28/0x48
 |  sifive_gpio_probe+0xc0/0x1da

Although it's possible to fix the driver in this case, other splats have
been seen from other drivers, including the infamous 8250 UART, and so
it's better to address this problem in the mmiowb core itself.

Fix mmiowb_set_pending() by using the raw_cpu_ptr() to get at the mmiowb
state and then only updating the 'mmiowb_pending' field if we are not
preemptible (i.e. we have a non-zero nesting count).

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Reported-by: Palmer Dabbelt <palmer@dabbelt.com>
Reported-by: Emil Renner Berthing <kernel@esmil.dk>
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
Link: https://lore.kernel.org/r/20200716112816.7356-1-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Input: add `SW_MACHINE_COVER` 2020-07-29T08:18:36+00:00 Merlijn Wajer merlijn@wizzup.org 2020-06-30T18:47:04+00:00 80fed4024c39d8d7cea91b9ebba2398c9976459f [ Upstream commit c463bb2a8f8d7d97aa414bf7714fc77e9d3b10df ] This event code represents the state of a removable cover of a device. Value 0 means that the cover is open or removed, value 1 means that the cover is closed. Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Merlijn Wajer <merlijn@wizzup.org> Link: https://lore.kernel.org/r/20200612125402.18393-2-merlijn@wizzup.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit c463bb2a8f8d7d97aa414bf7714fc77e9d3b10df ]

This event code represents the state of a removable cover of a device.
Value 0 means that the cover is open or removed, value 1 means that the
cover is closed.

Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Merlijn Wajer <merlijn@wizzup.org>
Link: https://lore.kernel.org/r/20200612125402.18393-2-merlijn@wizzup.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
dmabuf: use spinlock to access dmabuf->name 2020-07-29T08:18:29+00:00 Charan Teja Kalla charante@codeaurora.org 2020-06-19T11:57:19+00:00 722c6e954c90eca93ac89980e7b79577cd141777 [ Upstream commit 6348dd291e3653534a9e28e6917569bc9967b35b ] There exists a sleep-while-atomic bug while accessing the dmabuf->name under mutex in the dmabuffs_dname(). This is caused from the SELinux permissions checks on a process where it tries to validate the inherited files from fork() by traversing them through iterate_fd() (which traverse files under spin_lock) and call match_file(security/selinux/hooks.c) where the permission checks happen. This audit information is logged using dump_common_audit_data() where it calls d_path() to get the file path name. If the file check happen on the dmabuf's fd, then it ends up in ->dmabuffs_dname() and use mutex to access dmabuf->name. The flow will be like below: flush_unauthorized_files() iterate_fd() spin_lock() --> Start of the atomic section. match_file() file_has_perm() avc_has_perm() avc_audit() slow_avc_audit() common_lsm_audit() dump_common_audit_data() audit_log_d_path() d_path() dmabuffs_dname() mutex_lock()--> Sleep while atomic. Call trace captured (on 4.19 kernels) is below: ___might_sleep+0x204/0x208 __might_sleep+0x50/0x88 __mutex_lock_common+0x5c/0x1068 __mutex_lock_common+0x5c/0x1068 mutex_lock_nested+0x40/0x50 dmabuffs_dname+0xa0/0x170 d_path+0x84/0x290 audit_log_d_path+0x74/0x130 common_lsm_audit+0x334/0x6e8 slow_avc_audit+0xb8/0xf8 avc_has_perm+0x154/0x218 file_has_perm+0x70/0x180 match_file+0x60/0x78 iterate_fd+0x128/0x168 selinux_bprm_committing_creds+0x178/0x248 security_bprm_committing_creds+0x30/0x48 install_exec_creds+0x1c/0x68 load_elf_binary+0x3a4/0x14e0 search_binary_handler+0xb0/0x1e0 So, use spinlock to access dmabuf->name to avoid sleep-while-atomic. Cc: <stable@vger.kernel.org> [5.3+] Signed-off-by: Charan Teja Kalla <charante@codeaurora.org> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Acked-by: Christian König <christian.koenig@amd.com> [sumits: added comment to spinlock_t definition to avoid warning] Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/a83e7f0d-4e54-9848-4b58-e1acdbe06735@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 6348dd291e3653534a9e28e6917569bc9967b35b ]

There exists a sleep-while-atomic bug while accessing the dmabuf->name
under mutex in the dmabuffs_dname(). This is caused from the SELinux
permissions checks on a process where it tries to validate the inherited
files from fork() by traversing them through iterate_fd() (which
traverse files under spin_lock) and call
match_file(security/selinux/hooks.c) where the permission checks happen.
This audit information is logged using dump_common_audit_data() where it
calls d_path() to get the file path name. If the file check happen on
the dmabuf's fd, then it ends up in ->dmabuffs_dname() and use mutex to
access dmabuf->name. The flow will be like below:
flush_unauthorized_files()
  iterate_fd()
    spin_lock() --> Start of the atomic section.
      match_file()
        file_has_perm()
          avc_has_perm()
            avc_audit()
              slow_avc_audit()
	        common_lsm_audit()
		  dump_common_audit_data()
		    audit_log_d_path()
		      d_path()
                        dmabuffs_dname()
                          mutex_lock()--> Sleep while atomic.

Call trace captured (on 4.19 kernels) is below:
___might_sleep+0x204/0x208
__might_sleep+0x50/0x88
__mutex_lock_common+0x5c/0x1068
__mutex_lock_common+0x5c/0x1068
mutex_lock_nested+0x40/0x50
dmabuffs_dname+0xa0/0x170
d_path+0x84/0x290
audit_log_d_path+0x74/0x130
common_lsm_audit+0x334/0x6e8
slow_avc_audit+0xb8/0xf8
avc_has_perm+0x154/0x218
file_has_perm+0x70/0x180
match_file+0x60/0x78
iterate_fd+0x128/0x168
selinux_bprm_committing_creds+0x178/0x248
security_bprm_committing_creds+0x30/0x48
install_exec_creds+0x1c/0x68
load_elf_binary+0x3a4/0x14e0
search_binary_handler+0xb0/0x1e0

So, use spinlock to access dmabuf->name to avoid sleep-while-atomic.

Cc: <stable@vger.kernel.org> [5.3+]
Signed-off-by: Charan Teja Kalla <charante@codeaurora.org>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
 [sumits: added comment to spinlock_t definition to avoid warning]
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/a83e7f0d-4e54-9848-4b58-e1acdbe06735@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
rxrpc: Fix trace string 2020-07-22T07:33:17+00:00 David Howells dhowells@redhat.com 2020-06-17T21:50:33+00:00 1245a1e0e1c3cf5e62eb34e4536c997233359b45 commit aadf9dcef9d4cd68c73a4ab934f93319c4becc47 upstream. The trace symbol printer (__print_symbolic()) ignores symbols that map to an empty string and prints the hex value instead. Fix the symbol for rxrpc_cong_no_change to " -" instead of "" to avoid this. Fixes: b54a134a7de4 ("rxrpc: Fix handling of enums-to-string translation in tracing") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit aadf9dcef9d4cd68c73a4ab934f93319c4becc47 upstream.

The trace symbol printer (__print_symbolic()) ignores symbols that map to
an empty string and prints the hex value instead.

Fix the symbol for rxrpc_cong_no_change to " -" instead of "" to avoid
this.

Fixes: b54a134a7de4 ("rxrpc: Fix handling of enums-to-string translation in tracing")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Input: elan_i2c - add more hardware ID for Lenovo laptops 2020-07-22T07:33:13+00:00 Dave Wang dave.wang@emc.com.tw 2020-07-09T05:25:03+00:00 97f1aecb80e9716c7b0f9163e5953d7976331fc3 commit a50ca29523b18baea548bdf5df9b4b923c2bb4f6 upstream. This adds more hardware IDs for Elan touchpads found in various Lenovo laptops. Signed-off-by: Dave Wang <dave.wang@emc.com.tw> Link: https://lore.kernel.org/r/000201d5a8bd$9fead3f0$dfc07bd0$@emc.com.tw Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a50ca29523b18baea548bdf5df9b4b923c2bb4f6 upstream.

This adds more hardware IDs for Elan touchpads found in various Lenovo
laptops.

Signed-off-by: Dave Wang <dave.wang@emc.com.tw>
Link: https://lore.kernel.org/r/000201d5a8bd$9fead3f0$dfc07bd0$@emc.com.tw
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>