linux-stable.git/include, branch v5.4.2

net/tls: use sg_next() to walk sg entries

2019-12-04T21:31:02+00:00

[ Upstream commit c5daa6cccdc2f94aca2c9b3fa5f94e4469997293 ]

Partially sent record cleanup path increments an SG entry
directly instead of using sg_next(). This should not be a
problem today, as encrypted messages should be always
allocated as arrays. But given this is a cleanup path it's
easy to miss was this ever to change. Use sg_next(), and
simplify the code.

Signed-off-by: Jakub Kicinski 
Reviewed-by: Simon Horman 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net/tls: remove the dead inplace_crypto code

2019-12-04T21:31:02+00:00

[ Upstream commit 9e5ffed37df68d0ccfb2fdc528609e23a1e70ebe ]

Looks like when BPF support was added by commit d3b18ad31f93
("tls: add bpf support to sk_msg handling") and
commit d829e9c4112b ("tls: convert to generic sk_msg interface")
it broke/removed the support for in-place crypto as added by
commit 4e6d47206c32 ("tls: Add support for inplace records
encryption").

The inplace_crypto member of struct tls_rec is dead, inited
to zero, and sometimes set to zero again. It used to be
set to 1 when record was allocated, but the skmsg code doesn't
seem to have been written with the idea of in-place crypto
in mind.

Since non trivial effort is required to bring the feature back
and we don't really have the HW to measure the benefit just
remove the left over support for now to avoid confusing readers.

Signed-off-by: Jakub Kicinski 
Reviewed-by: Simon Horman 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: skmsg: fix TLS 1.3 crash with full sk_msg

2019-12-04T21:31:01+00:00

[ Upstream commit 031097d9e079e40dce401031d1012e83d80eaf01 ]

TLS 1.3 started using the entry at the end of the SG array
for chaining-in the single byte content type entry. This mostly
works:

[ E E E E E E . . ]
  ^           ^
   start       end

                 E < content type
               /
[ E E E E E E C . ]
  ^           ^
   start       end

(Where E denotes a populated SG entry; C denotes a chaining entry.)

If the array is full, however, the end will point to the start:

[ E E E E E E E E ]
  ^
   start
   end

And we end up overwriting the start:

    E < content type
   /
[ C E E E E E E E ]
  ^
   start
   end

The sg array is supposed to be a circular buffer with start and
end markers pointing anywhere. In case where start > end
(i.e. the circular buffer has "wrapped") there is an extra entry
reserved at the end to chain the two halves together.

[ E E E E E E . . l ]

(Where l is the reserved entry for "looping" back to front.

As suggested by John, let's reserve another entry for chaining
SG entries after the main circular buffer. Note that this entry
has to be pointed to by the end entry so its position is not fixed.

Examples of full messages:

[ E E E E E E E E . l ]
  ^               ^
   start           end

   <---------------.
[ E E . E E E E E E l ]
      ^ ^
   end   start

Now the end will always point to an unused entry, so TLS 1.3
can always use it.

Fixes: 130b392c6cd6 ("net: tls: Add tls 1.3 support")
Signed-off-by: Jakub Kicinski 
Reviewed-by: Simon Horman 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

sctp: cache netns in sctp_ep_common

2019-12-04T21:30:57+00:00

[ Upstream commit 312434617cb16be5166316cf9d08ba760b1042a1 ]

This patch is to fix a data-race reported by syzbot:

  BUG: KCSAN: data-race in sctp_assoc_migrate / sctp_hash_obj

  write to 0xffff8880b67c0020 of 8 bytes by task 18908 on cpu 1:
    sctp_assoc_migrate+0x1a6/0x290 net/sctp/associola.c:1091
    sctp_sock_migrate+0x8aa/0x9b0 net/sctp/socket.c:9465
    sctp_accept+0x3c8/0x470 net/sctp/socket.c:4916
    inet_accept+0x7f/0x360 net/ipv4/af_inet.c:734
    __sys_accept4+0x224/0x430 net/socket.c:1754
    __do_sys_accept net/socket.c:1795 [inline]
    __se_sys_accept net/socket.c:1792 [inline]
    __x64_sys_accept+0x4e/0x60 net/socket.c:1792
    do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290
    entry_SYSCALL_64_after_hwframe+0x44/0xa9

  read to 0xffff8880b67c0020 of 8 bytes by task 12003 on cpu 0:
    sctp_hash_obj+0x4f/0x2d0 net/sctp/input.c:894
    rht_key_get_hash include/linux/rhashtable.h:133 [inline]
    rht_key_hashfn include/linux/rhashtable.h:159 [inline]
    rht_head_hashfn include/linux/rhashtable.h:174 [inline]
    head_hashfn lib/rhashtable.c:41 [inline]
    rhashtable_rehash_one lib/rhashtable.c:245 [inline]
    rhashtable_rehash_chain lib/rhashtable.c:276 [inline]
    rhashtable_rehash_table lib/rhashtable.c:316 [inline]
    rht_deferred_worker+0x468/0xab0 lib/rhashtable.c:420
    process_one_work+0x3d4/0x890 kernel/workqueue.c:2269
    worker_thread+0xa0/0x800 kernel/workqueue.c:2415
    kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253
    ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352

It was caused by rhashtable access asoc->base.sk when sctp_assoc_migrate
is changing its value. However, what rhashtable wants is netns from asoc
base.sk, and for an asoc, its netns won't change once set. So we can
simply fix it by caching netns since created.

Fixes: d6c0256a60e6 ("sctp: add the rhashtable apis for sctp global transport hashtable")
Reported-by: syzbot+e3b35fe7918ff0ee474e@syzkaller.appspotmail.com
Signed-off-by: Xin Long 
Acked-by: Marcelo Ricardo Leitner 
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

futex: Add mutex around futex exit

2019-11-29T09:10:13+00:00

commit 3f186d974826847a07bc7964d79ec4eded475ad9 upstream.

The mutex will be used in subsequent changes to replace the busy looping of
a waiter when the futex owner is currently executing the exit cleanup to
prevent a potential live lock.

Signed-off-by: Thomas Gleixner 
Reviewed-by: Ingo Molnar 
Acked-by: Peter Zijlstra (Intel) 
Link: https://lkml.kernel.org/r/20191106224556.845798895@linutronix.de
Signed-off-by: Greg Kroah-Hartman

futex: Mark the begin of futex exit explicitly

2019-11-29T09:10:11+00:00

commit 18f694385c4fd77a09851fd301236746ca83f3cb upstream.

Instead of relying on PF_EXITING use an explicit state for the futex exit
and set it in the futex exit function. This moves the smp barrier and the
lock/unlock serialization into the futex code.

As with the DEAD state this is restricted to the exit path as exec
continues to use the same task struct.

This allows to simplify that logic in a next step.

Signed-off-by: Thomas Gleixner 
Reviewed-by: Ingo Molnar 
Acked-by: Peter Zijlstra (Intel) 
Link: https://lkml.kernel.org/r/20191106224556.539409004@linutronix.de
Signed-off-by: Greg Kroah-Hartman

futex: Split futex_mm_release() for exit/exec

2019-11-29T09:10:10+00:00

commit 150d71584b12809144b8145b817e83b81158ae5f upstream.

To allow separate handling of the futex exit state in the futex exit code
for exit and exec, split futex_mm_release() into two functions and invoke
them from the corresponding exit/exec_mm_release() callsites.

Preparatory only, no functional change.

Signed-off-by: Thomas Gleixner 
Reviewed-by: Ingo Molnar 
Acked-by: Peter Zijlstra (Intel) 
Link: https://lkml.kernel.org/r/20191106224556.332094221@linutronix.de
Signed-off-by: Greg Kroah-Hartman

exit/exec: Seperate mm_release()

2019-11-29T09:10:10+00:00

commit 4610ba7ad877fafc0a25a30c6c82015304120426 upstream.

mm_release() contains the futex exit handling. mm_release() is called from
do_exit()->exit_mm() and from exec()->exec_mm().

In the exit_mm() case PF_EXITING and the futex state is updated. In the
exec_mm() case these states are not touched.

As the futex exit code needs further protections against exit races, this
needs to be split into two functions.

Preparatory only, no functional change.

Signed-off-by: Thomas Gleixner 
Reviewed-by: Ingo Molnar 
Acked-by: Peter Zijlstra (Intel) 
Link: https://lkml.kernel.org/r/20191106224556.240518241@linutronix.de
Signed-off-by: Greg Kroah-Hartman

futex: Replace PF_EXITPIDONE with a state

2019-11-29T09:10:09+00:00

commit 3d4775df0a89240f671861c6ab6e8d59af8e9e41 upstream.

The futex exit handling relies on PF_ flags. That's suboptimal as it
requires a smp_mb() and an ugly lock/unlock of the exiting tasks pi_lock in
the middle of do_exit() to enforce the observability of PF_EXITING in the
futex code.

Add a futex_state member to task_struct and convert the PF_EXITPIDONE logic
over to the new state. The PF_EXITING dependency will be cleaned up in a
later step.

This prepares for handling various futex exit issues later.

Signed-off-by: Thomas Gleixner 
Reviewed-by: Ingo Molnar 
Acked-by: Peter Zijlstra (Intel) 
Link: https://lkml.kernel.org/r/20191106224556.149449274@linutronix.de
Signed-off-by: Greg Kroah-Hartman

futex: Move futex exit handling into futex code

2019-11-29T09:10:08+00:00

commit ba31c1a48538992316cc71ce94fa9cd3e7b427c0 upstream.

The futex exit handling is #ifdeffed into mm_release() which is not pretty
to begin with. But upcoming changes to address futex exit races need to add
more functionality to this exit code.

Split it out into a function, move it into futex code and make the various
futex exit functions static.

Preparatory only and no functional change.

Folded build fix from Borislav.

Signed-off-by: Thomas Gleixner 
Reviewed-by: Ingo Molnar 
Acked-by: Peter Zijlstra (Intel) 
Link: https://lkml.kernel.org/r/20191106224556.049705556@linutronix.de
Signed-off-by: Greg Kroah-Hartman