linux-stable.git/include, branch v4.9.321

kexec_file: drop weak attribute from arch_kexec_apply_relocations[_add]

2022-07-02T14:17:16+00:00

commit 3e35142ef99fe6b4fe5d834ad43ee13cca10a2dc upstream.

Since commit d1bcae833b32f1 ("ELF: Don't generate unused section
symbols") [1], binutils (v2.36+) started dropping section symbols that
it thought were unused.  This isn't an issue in general, but with
kexec_file.c, gcc is placing kexec_arch_apply_relocations[_add] into a
separate .text.unlikely section and the section symbol ".text.unlikely"
is being dropped. Due to this, recordmcount is unable to find a non-weak
symbol in .text.unlikely to generate a relocation record against.

Address this by dropping the weak attribute from these functions.
Instead, follow the existing pattern of having architectures #define the
name of the function they want to override in their headers.

[1] https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=d1bcae833b32f1

[akpm@linux-foundation.org: arch/s390/include/asm/kexec.h needs linux/module.h]
Link: https://lkml.kernel.org/r/20220519091237.676736-1-naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Michael Ellerman 
Signed-off-by: Naveen N. Rao 
Cc: "Eric W. Biederman" 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Greg Kroah-Hartman

random: quiet urandom warning ratelimit suppression message

2022-07-02T14:17:14+00:00

commit c01d4d0a82b71857be7449380338bc53dde2da92 upstream.

random.c ratelimits how much it warns about uninitialized urandom reads
using __ratelimit(). When the RNG is finally initialized, it prints the
number of missed messages due to ratelimiting.

It has been this way since that functionality was introduced back in
2018. Recently, cc1e127bfa95 ("random: remove ratelimiting for in-kernel
unseeded randomness") put a bit more stress on the urandom ratelimiting,
which teased out a bug in the implementation.

Specifically, when under pressure, __ratelimit() will print its own
message and reset the count back to 0, making the final message at the
end less useful. Secondly, it does so as a pr_warn(), which apparently
is undesirable for people's CI.

Fortunately, __ratelimit() has the RATELIMIT_MSG_ON_RELEASE flag exactly
for this purpose, so we set the flag.

Fixes: 4e00b339e264 ("random: rate limit unseeded randomness warnings")
Cc: stable@vger.kernel.org
Reported-by: Jon Hunter 
Reported-by: Ron Economos 
Tested-by: Ron Economos 
Signed-off-by: Jason A. Donenfeld 
Signed-off-by: Greg Kroah-Hartman

ata: libata: add qc->flags in ata_qc_complete_template tracepoint

2022-07-02T14:17:14+00:00

commit 540a92bfe6dab7310b9df2e488ba247d784d0163 upstream.

Add flags value to check the result of ata completion

Fixes: 255c03d15a29 ("libata: Add tracepoints")
Cc: stable@vger.kernel.org
Signed-off-by: Edward Wu 
Signed-off-by: Damien Le Moal 
Signed-off-by: Greg Kroah-Hartman

vt: drop old FONT ioctls

2022-07-02T14:17:14+00:00

commit ff2047fb755d4415ec3c70ac799889371151796d upstream.

Drop support for these ioctls:
* PIO_FONT, PIO_FONTX
* GIO_FONT, GIO_FONTX
* PIO_FONTRESET

As was demonstrated by commit 90bfdeef83f1 (tty: make FONTX ioctl use
the tty pointer they were actually passed), these ioctls are not used
from userspace, as:
1) they used to be broken (set up font on current console, not the open
   one) and racy (before the commit above)
2) KDFONTOP ioctl is used for years instead

Note that PIO_FONTRESET is defunct on most systems as VGA_CONSOLE is set
on them for ages. That turns on BROKEN_GRAPHICS_PROGRAMS which makes
PIO_FONTRESET just return an error.

We are removing KD_FONT_FLAG_OLD here as it was used only by these
removed ioctls. kd.h header exists both in kernel and uapi headers, so
we can remove the kernel one completely. Everyone includeing kd.h will
now automatically get the uapi one.

There are now unused definitions of the ioctl numbers and "struct
consolefontdesc" in kd.h, but as it is a uapi header, I am not touching
these.

Signed-off-by: Jiri Slaby 
Link: https://lore.kernel.org/r/20210105120239.28031-8-jslaby@suse.cz
Cc: guodaxing 
Signed-off-by: Greg Kroah-Hartman

secure_seq: use the 64 bits of the siphash for port offset calculation

2022-06-25T09:45:19+00:00

commit b2d057560b8107c633b39aabe517ff9d93f285e3 upstream.

SipHash replaced MD5 in secure_ipv{4,6}_port_ephemeral() via commit
7cd23e5300c1 ("secure_seq: use SipHash in place of MD5"), but the output
remained truncated to 32-bit only. In order to exploit more bits from the
hash, let's make the functions return the full 64-bit of siphash_3u32().
We also make sure the port offset calculation in __inet_hash_connect()
remains done on 32-bit to avoid the need for div_u64_rem() and an extra
cost on 32-bit systems.

Cc: Jason A. Donenfeld 
Cc: Moshe Kol 
Cc: Yossi Gilad 
Cc: Amit Klein 
Reviewed-by: Eric Dumazet 
Signed-off-by: Willy Tarreau 
Signed-off-by: Jakub Kicinski 
Signed-off-by: Ben Hutchings 
Signed-off-by: Greg Kroah-Hartman

Reinstate some of "swiotlb: rework "fix info leak with DMA_FROM_DEVICE""

2022-06-25T09:45:19+00:00

commit 901c7280ca0d5e2b4a8929fbe0bfb007ac2a6544 upstream.

Halil Pasic points out [1] that the full revert of that commit (revert
in bddac7c1e02b), and that a partial revert that only reverts the
problematic case, but still keeps some of the cleanups is probably
better.  

And that partial revert [2] had already been verified by Oleksandr
Natalenko to also fix the issue, I had just missed that in the long
discussion.

So let's reinstate the cleanups from commit aa6f8dcbab47 ("swiotlb:
rework "fix info leak with DMA_FROM_DEVICE""), and effectively only
revert the part that caused problems.

Link: https://lore.kernel.org/all/20220328013731.017ae3e3.pasic@linux.ibm.com/ [1]
Link: https://lore.kernel.org/all/20220324055732.GB12078@lst.de/ [2]
Link: https://lore.kernel.org/all/4386660.LvFx2qVVIh@natalenko.name/ [3]
Suggested-by: Halil Pasic 
Tested-by: Oleksandr Natalenko 
Cc: Christoph Hellwig 
Signed-off-by: Linus Torvalds 
[OP: backport to 4.14: apply swiotlb_tbl_map_single() changes in lib/swiotlb.c]
Signed-off-by: Ovidiu Panait 
Signed-off-by: Greg Kroah-Hartman 
[bwh: Backported to 4.9: adjust context]
Signed-off-by: Ben Hutchings 
Signed-off-by: Greg Kroah-Hartman

swiotlb: fix info leak with DMA_FROM_DEVICE

2022-06-25T09:45:19+00:00

commit ddbd89deb7d32b1fbb879f48d68fda1a8ac58e8e upstream.

The problem I'm addressing was discovered by the LTP test covering
cve-2018-1000204.

A short description of what happens follows:
1) The test case issues a command code 00 (TEST UNIT READY) via the SG_IO
   interface with: dxfer_len == 524288, dxdfer_dir == SG_DXFER_FROM_DEV
   and a corresponding dxferp. The peculiar thing about this is that TUR
   is not reading from the device.
2) In sg_start_req() the invocation of blk_rq_map_user() effectively
   bounces the user-space buffer. As if the device was to transfer into
   it. Since commit a45b599ad808 ("scsi: sg: allocate with __GFP_ZERO in
   sg_build_indirect()") we make sure this first bounce buffer is
   allocated with GFP_ZERO.
3) For the rest of the story we keep ignoring that we have a TUR, so the
   device won't touch the buffer we prepare as if the we had a
   DMA_FROM_DEVICE type of situation. My setup uses a virtio-scsi device
   and the  buffer allocated by SG is mapped by the function
   virtqueue_add_split() which uses DMA_FROM_DEVICE for the "in" sgs (here
   scatter-gather and not scsi generics). This mapping involves bouncing
   via the swiotlb (we need swiotlb to do virtio in protected guest like
   s390 Secure Execution, or AMD SEV).
4) When the SCSI TUR is done, we first copy back the content of the second
   (that is swiotlb) bounce buffer (which most likely contains some
   previous IO data), to the first bounce buffer, which contains all
   zeros.  Then we copy back the content of the first bounce buffer to
   the user-space buffer.
5) The test case detects that the buffer, which it zero-initialized,
  ain't all zeros and fails.

One can argue that this is an swiotlb problem, because without swiotlb
we leak all zeros, and the swiotlb should be transparent in a sense that
it does not affect the outcome (if all other participants are well
behaved).

Copying the content of the original buffer into the swiotlb buffer is
the only way I can think of to make swiotlb transparent in such
scenarios. So let's do just that if in doubt, but allow the driver
to tell us that the whole mapped buffer is going to be overwritten,
in which case we can preserve the old behavior and avoid the performance
impact of the extra bounce.

Signed-off-by: Halil Pasic 
Signed-off-by: Christoph Hellwig 
[OP: backport to 4.14: apply swiotlb_tbl_map_single() changes in lib/swiotlb.c]
Signed-off-by: Ovidiu Panait 
Signed-off-by: Greg Kroah-Hartman 
[bwh: Backported to 4.9: adjust context]
Signed-off-by: Ben Hutchings 
Signed-off-by: Greg Kroah-Hartman

random: mark bootloader randomness code as __init

2022-06-25T09:45:16+00:00

commit 39e0f991a62ed5efabd20711a7b6e7da92603170 upstream.

add_bootloader_randomness() and the variables it touches are only used
during __init and not after, so mark these as __init. At the same time,
unexport this, since it's only called by other __init code that's
built-in.

Cc: stable@vger.kernel.org
Fixes: 428826f5358c ("fdt: add support for rng-seed")
Signed-off-by: Jason A. Donenfeld 
Signed-off-by: Greg Kroah-Hartman

crypto: drbg - make reseeding from get_random_bytes() synchronous

2022-06-25T09:45:16+00:00

commit 074bcd4000e0d812bc253f86fedc40f81ed59ccc upstream.

get_random_bytes() usually hasn't full entropy available by the time DRBG
instances are first getting seeded from it during boot. Thus, the DRBG
implementation registers random_ready_callbacks which would in turn
schedule some work for reseeding the DRBGs once get_random_bytes() has
sufficient entropy available.

For reference, the relevant history around handling DRBG (re)seeding in
the context of a not yet fully seeded get_random_bytes() is:

  commit 16b369a91d0d ("random: Blocking API for accessing
                        nonblocking_pool")
  commit 4c7879907edd ("crypto: drbg - add async seeding operation")

  commit 205a525c3342 ("random: Add callback API for random pool
                        readiness")
  commit 57225e679788 ("crypto: drbg - Use callback API for random
                        readiness")
  commit c2719503f5e1 ("random: Remove kernel blocking API")

However, some time later, the initialization state of get_random_bytes()
has been made queryable via rng_is_initialized() introduced with commit
9a47249d444d ("random: Make crng state queryable"). This primitive now
allows for streamlining the DRBG reseeding from get_random_bytes() by
replacing that aforementioned asynchronous work scheduling from
random_ready_callbacks with some simpler, synchronous code in
drbg_generate() next to the related logic already present therein. Apart
from improving overall code readability, this change will also enable DRBG
users to rely on wait_for_random_bytes() for ensuring that the initial
seeding has completed, if desired.

The previous patches already laid the grounds by making drbg_seed() to
record at each DRBG instance whether it was being seeded at a time when
rng_is_initialized() still had been false as indicated by
->seeded == DRBG_SEED_STATE_PARTIAL.

All that remains to be done now is to make drbg_generate() check for this
condition, determine whether rng_is_initialized() has flipped to true in
the meanwhile and invoke a reseed from get_random_bytes() if so.

Make this move:
- rename the former drbg_async_seed() work handler, i.e. the one in charge
  of reseeding a DRBG instance from get_random_bytes(), to
  "drbg_seed_from_random()",
- change its signature as appropriate, i.e. make it take a struct
  drbg_state rather than a work_struct and change its return type from
  "void" to "int" in order to allow for passing error information from
  e.g. its __drbg_seed() invocation onwards to callers,
- make drbg_generate() invoke this drbg_seed_from_random() once it
  encounters a DRBG instance with ->seeded == DRBG_SEED_STATE_PARTIAL by
  the time rng_is_initialized() has flipped to true and
- prune everything related to the former, random_ready_callback based
  mechanism.

As drbg_seed_from_random() is now getting invoked from drbg_generate() with
the ->drbg_mutex being held, it must not attempt to recursively grab it
once again. Remove the corresponding mutex operations from what is now
drbg_seed_from_random(). Furthermore, as drbg_seed_from_random() can now
report errors directly to its caller, there's no need for it to temporarily
switch the DRBG's ->seeded state to DRBG_SEED_STATE_UNSEEDED so that a
failure of the subsequently invoked __drbg_seed() will get signaled to
drbg_generate(). Don't do it then.

Signed-off-by: Nicolai Stange 
Signed-off-by: Herbert Xu 
[Jason: for stable, undid the modifications for the backport of 5acd3548.]
Signed-off-by: Jason A. Donenfeld 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Greg Kroah-Hartman

crypto: drbg - track whether DRBG was seeded with !rng_is_initialized()

2022-06-25T09:45:16+00:00

commit 2bcd25443868aa8863779a6ebc6c9319633025d2 upstream.

Currently, the DRBG implementation schedules asynchronous works from
random_ready_callbacks for reseeding the DRBG instances with output from
get_random_bytes() once the latter has sufficient entropy available.

However, as the get_random_bytes() initialization state can get queried by
means of rng_is_initialized() now, there is no real need for this
asynchronous reseeding logic anymore and it's better to keep things simple
by doing it synchronously when needed instead, i.e. from drbg_generate()
once rng_is_initialized() has flipped to true.

Of course, for this to work, drbg_generate() would need some means by which
it can tell whether or not rng_is_initialized() has flipped to true since
the last seeding from get_random_bytes(). Or equivalently, whether or not
the last seed from get_random_bytes() has happened when
rng_is_initialized() was still evaluating to false.

As it currently stands, enum drbg_seed_state allows for the representation
of two different DRBG seeding states: DRBG_SEED_STATE_UNSEEDED and
DRBG_SEED_STATE_FULL. The former makes drbg_generate() to invoke a full
reseeding operation involving both, the rather expensive jitterentropy as
well as the get_random_bytes() randomness sources. The DRBG_SEED_STATE_FULL
state on the other hand implies that no reseeding at all is required for a
!->pr DRBG variant.

Introduce the new DRBG_SEED_STATE_PARTIAL state to enum drbg_seed_state for
representing the condition that a DRBG was being seeded when
rng_is_initialized() had still been false. In particular, this new state
implies that
- the given DRBG instance has been fully seeded from the jitterentropy
  source (if enabled)
- and drbg_generate() is supposed to reseed from get_random_bytes()
  *only* once rng_is_initialized() turns to true.

Up to now, the __drbg_seed() helper used to set the given DRBG instance's
->seeded state to constant DRBG_SEED_STATE_FULL. Introduce a new argument
allowing for the specification of the to be written ->seeded value instead.
Make the first of its two callers, drbg_seed(), determine the appropriate
value based on rng_is_initialized(). The remaining caller,
drbg_async_seed(), is known to get invoked only once rng_is_initialized()
is true, hence let it pass constant DRBG_SEED_STATE_FULL for the new
argument to __drbg_seed().

There is no change in behaviour, except for that the pr_devel() in
drbg_generate() would now report "unseeded" for ->pr DRBG instances which
had last been seeded when rng_is_initialized() was still evaluating to
false.

Signed-off-by: Nicolai Stange 
Reviewed-by: Stephan Müller 
Signed-off-by: Herbert Xu 
Signed-off-by: Jason A. Donenfeld 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Greg Kroah-Hartman