linux-stable.git/include, branch v4.9.182

tcp: add tcp_min_snd_mss sysctl

2019-06-17T17:53:33+00:00

commit 5f3e2bf008c2221478101ee72f5cb4654b9fc363 upstream.

Some TCP peers announce a very small MSS option in their SYN and/or
SYN/ACK messages.

This forces the stack to send packets with a very high network/cpu
overhead.

Linux has enforced a minimal value of 48. Since this value includes
the size of TCP options, and that the options can consume up to 40
bytes, this means that each segment can include only 8 bytes of payload.

In some cases, it can be useful to increase the minimal value
to a saner value.

We still let the default to 48 (TCP_MIN_SND_MSS), for compatibility
reasons.

Note that TCP_MAXSEG socket option enforces a minimal value
of (TCP_MIN_MSS). David Miller increased this minimal value
in commit c39508d6f118 ("tcp: Make TCP_MAXSEG minimum more correct.")
from 64 to 88.

We might in the future merge TCP_MIN_SND_MSS and TCP_MIN_MSS.

CVE-2019-11479 -- tcp mss hardcoded to 48

Signed-off-by: Eric Dumazet 
Suggested-by: Jonathan Looney 
Acked-by: Neal Cardwell 
Cc: Yuchung Cheng 
Cc: Tyler Hicks 
Cc: Bruce Curtis 
Cc: Jonathan Lemon 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tcp: tcp_fragment() should apply sane memory limits

2019-06-17T17:53:32+00:00

commit f070ef2ac66716357066b683fb0baf55f8191a2e upstream.

Jonathan Looney reported that a malicious peer can force a sender
to fragment its retransmit queue into tiny skbs, inflating memory
usage and/or overflow 32bit counters.

TCP allows an application to queue up to sk_sndbuf bytes,
so we need to give some allowance for non malicious splitting
of retransmit queue.

A new SNMP counter is added to monitor how many times TCP
did not allow to split an skb if the allowance was exceeded.

Note that this counter might increase in the case applications
use SO_SNDBUF socket option to lower sk_sndbuf.

CVE-2019-11478 : tcp_fragment, prevent fragmenting a packet when the
	socket is already using more than half the allowed space

Signed-off-by: Eric Dumazet 
Reported-by: Jonathan Looney 
Acked-by: Neal Cardwell 
Acked-by: Yuchung Cheng 
Reviewed-by: Tyler Hicks 
Cc: Bruce Curtis 
Cc: Jonathan Lemon 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tcp: limit payload size of sacked skbs

2019-06-17T17:53:32+00:00

commit 3b4929f65b0d8249f19a50245cd88ed1a2f78cff upstream.

Jonathan Looney reported that TCP can trigger the following crash
in tcp_shifted_skb() :

	BUG_ON(tcp_skb_pcount(skb) < pcount);

This can happen if the remote peer has advertized the smallest
MSS that linux TCP accepts : 48

An skb can hold 17 fragments, and each fragment can hold 32KB
on x86, or 64KB on PowerPC.

This means that the 16bit witdh of TCP_SKB_CB(skb)->tcp_gso_segs
can overflow.

Note that tcp_sendmsg() builds skbs with less than 64KB
of payload, so this problem needs SACK to be enabled.
SACK blocks allow TCP to coalesce multiple skbs in the retransmit
queue, thus filling the 17 fragments to maximal capacity.

CVE-2019-11477 -- u16 overflow of TCP_SKB_CB(skb)->tcp_gso_segs

Backport notes, provided by Joao Martins 

v4.15 or since commit 737ff314563 ("tcp: use sequence distance to
detect reordering") had switched from the packet-based FACK tracking and
switched to sequence-based.

v4.14 and older still have the old logic and hence on
tcp_skb_shift_data() needs to retain its original logic and have
@fack_count in sync. In other words, we keep the increment of pcount with
tcp_skb_pcount(skb) to later used that to update fack_count. To make it
more explicit we track the new skb that gets incremented to pcount in
@next_pcount, and we get to avoid the constant invocation of
tcp_skb_pcount(skb) all together.

Fixes: 832d11c5cd07 ("tcp: Try to restore large SKBs while SACK processing")
Signed-off-by: Eric Dumazet 
Reported-by: Jonathan Looney 
Acked-by: Neal Cardwell 
Reviewed-by: Tyler Hicks 
Cc: Yuchung Cheng 
Cc: Bruce Curtis 
Cc: Jonathan Lemon 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipv4: Define __ipv4_neigh_lookup_noref when CONFIG_INET is disabled

2019-06-11T10:22:49+00:00

commit 9b3040a6aafd7898ece7fc7efcbca71e42aa8069 upstream.

Define __ipv4_neigh_lookup_noref to return NULL when CONFIG_INET is disabled.

Fixes: 4b2a2bfeb3f0 ("neighbor: Call __ipv4_neigh_lookup_noref in neigh_xmit")
Reported-by: kbuild test robot 
Signed-off-by: David Ahern 
Signed-off-by: David S. Miller 
Cc: Nobuhiro Iwamatsu 
Signed-off-by: Greg Kroah-Hartman

fuse: Add FOPEN_STREAM to use stream_open()

2019-06-11T10:22:49+00:00

commit bbd84f33652f852ce5992d65db4d020aba21f882 upstream.

Starting from commit 9c225f2655e3 ("vfs: atomic f_pos accesses as per
POSIX") files opened even via nonseekable_open gate read and write via lock
and do not allow them to be run simultaneously. This can create read vs
write deadlock if a filesystem is trying to implement a socket-like file
which is intended to be simultaneously used for both read and write from
filesystem client.  See commit 10dce8af3422 ("fs: stream_open - opener for
stream-like files so that read and write can run simultaneously without
deadlock") for details and e.g. commit 581d21a2d02a ("xenbus: fix deadlock
on writes to /proc/xen/xenbus") for a similar deadlock example on
/proc/xen/xenbus.

To avoid such deadlock it was tempting to adjust fuse_finish_open to use
stream_open instead of nonseekable_open on just FOPEN_NONSEEKABLE flags,
but grepping through Debian codesearch shows users of FOPEN_NONSEEKABLE,
and in particular GVFS which actually uses offset in its read and write
handlers

	https://codesearch.debian.net/search?q=-%3Enonseekable+%3D
	https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1080
	https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1247-1346
	https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1399-1481

so if we would do such a change it will break a real user.

Add another flag (FOPEN_STREAM) for filesystem servers to indicate that the
opened handler is having stream-like semantics; does not use file position
and thus the kernel is free to issue simultaneous read and write request on
opened file handle.

This patch together with stream_open() should be added to stable kernels
starting from v3.14+. This will allow to patch OSSPD and other FUSE
filesystems that provide stream-like files to return FOPEN_STREAM |
FOPEN_NONSEEKABLE in open handler and this way avoid the deadlock on all
kernel versions. This should work because fuse_finish_open ignores unknown
open flags returned from a filesystem and so passing FOPEN_STREAM to a
kernel that is not aware of this flag cannot hurt. In turn the kernel that
is not aware of FOPEN_STREAM will be < v3.14 where just FOPEN_NONSEEKABLE
is sufficient to implement streams without read vs write deadlock.

Cc: stable@vger.kernel.org # v3.14+
Signed-off-by: Kirill Smelkov 
Signed-off-by: Miklos Szeredi 
Signed-off-by: Greg Kroah-Hartman

fs: stream_open - opener for stream-like files so that read and write can run simultaneously without deadlock

2019-06-11T10:22:49+00:00

commit 10dce8af34226d90fa56746a934f8da5dcdba3df upstream.

Commit 9c225f2655e3 ("vfs: atomic f_pos accesses as per POSIX") added
locking for file.f_pos access and in particular made concurrent read and
write not possible - now both those functions take f_pos lock for the
whole run, and so if e.g. a read is blocked waiting for data, write will
deadlock waiting for that read to complete.

This caused regression for stream-like files where previously read and
write could run simultaneously, but after that patch could not do so
anymore. See e.g. commit 581d21a2d02a ("xenbus: fix deadlock on writes
to /proc/xen/xenbus") which fixes such regression for particular case of
/proc/xen/xenbus.

The patch that added f_pos lock in 2014 did so to guarantee POSIX thread
safety for read/write/lseek and added the locking to file descriptors of
all regular files. In 2014 that thread-safety problem was not new as it
was already discussed earlier in 2006.

However even though 2006'th version of Linus's patch was adding f_pos
locking "only for files that are marked seekable with FMODE_LSEEK (thus
avoiding the stream-like objects like pipes and sockets)", the 2014
version - the one that actually made it into the tree as 9c225f2655e3 -
is doing so irregardless of whether a file is seekable or not.

See

    https://lore.kernel.org/lkml/53022DB1.4070805@gmail.com/
    https://lwn.net/Articles/180387
    https://lwn.net/Articles/180396

for historic context.

The reason that it did so is, probably, that there are many files that
are marked non-seekable, but e.g. their read implementation actually
depends on knowing current position to correctly handle the read. Some
examples:

	kernel/power/user.c		snapshot_read
	fs/debugfs/file.c		u32_array_read
	fs/fuse/control.c		fuse_conn_waiting_read + ...
	drivers/hwmon/asus_atk0110.c	atk_debugfs_ggrp_read
	arch/s390/hypfs/inode.c		hypfs_read_iter
	...

Despite that, many nonseekable_open users implement read and write with
pure stream semantics - they don't depend on passed ppos at all. And for
those cases where read could wait for something inside, it creates a
situation similar to xenbus - the write could be never made to go until
read is done, and read is waiting for some, potentially external, event,
for potentially unbounded time -> deadlock.

Besides xenbus, there are 14 such places in the kernel that I've found
with semantic patch (see below):

	drivers/xen/evtchn.c:667:8-24: ERROR: evtchn_fops: .read() can deadlock .write()
	drivers/isdn/capi/capi.c:963:8-24: ERROR: capi_fops: .read() can deadlock .write()
	drivers/input/evdev.c:527:1-17: ERROR: evdev_fops: .read() can deadlock .write()
	drivers/char/pcmcia/cm4000_cs.c:1685:7-23: ERROR: cm4000_fops: .read() can deadlock .write()
	net/rfkill/core.c:1146:8-24: ERROR: rfkill_fops: .read() can deadlock .write()
	drivers/s390/char/fs3270.c:488:1-17: ERROR: fs3270_fops: .read() can deadlock .write()
	drivers/usb/misc/ldusb.c:310:1-17: ERROR: ld_usb_fops: .read() can deadlock .write()
	drivers/hid/uhid.c:635:1-17: ERROR: uhid_fops: .read() can deadlock .write()
	net/batman-adv/icmp_socket.c:80:1-17: ERROR: batadv_fops: .read() can deadlock .write()
	drivers/media/rc/lirc_dev.c:198:1-17: ERROR: lirc_fops: .read() can deadlock .write()
	drivers/leds/uleds.c:77:1-17: ERROR: uleds_fops: .read() can deadlock .write()
	drivers/input/misc/uinput.c:400:1-17: ERROR: uinput_fops: .read() can deadlock .write()
	drivers/infiniband/core/user_mad.c:985:7-23: ERROR: umad_fops: .read() can deadlock .write()
	drivers/gnss/core.c:45:1-17: ERROR: gnss_fops: .read() can deadlock .write()

In addition to the cases above another regression caused by f_pos
locking is that now FUSE filesystems that implement open with
FOPEN_NONSEEKABLE flag, can no longer implement bidirectional
stream-like files - for the same reason as above e.g. read can deadlock
write locking on file.f_pos in the kernel.

FUSE's FOPEN_NONSEEKABLE was added in 2008 in a7c1b990f715 ("fuse:
implement nonseekable open") to support OSSPD. OSSPD implements /dev/dsp
in userspace with FOPEN_NONSEEKABLE flag, with corresponding read and
write routines not depending on current position at all, and with both
read and write being potentially blocking operations:

See

    https://github.com/libfuse/osspd
    https://lwn.net/Articles/308445

    https://github.com/libfuse/osspd/blob/14a9cff0/osspd.c#L1406
    https://github.com/libfuse/osspd/blob/14a9cff0/osspd.c#L1438-L1477
    https://github.com/libfuse/osspd/blob/14a9cff0/osspd.c#L1479-L1510

Corresponding libfuse example/test also describes FOPEN_NONSEEKABLE as
"somewhat pipe-like files ..." with read handler not using offset.
However that test implements only read without write and cannot exercise
the deadlock scenario:

    https://github.com/libfuse/libfuse/blob/fuse-3.4.2-3-ga1bff7d/example/poll.c#L124-L131
    https://github.com/libfuse/libfuse/blob/fuse-3.4.2-3-ga1bff7d/example/poll.c#L146-L163
    https://github.com/libfuse/libfuse/blob/fuse-3.4.2-3-ga1bff7d/example/poll.c#L209-L216

I've actually hit the read vs write deadlock for real while implementing
my FUSE filesystem where there is /head/watch file, for which open
creates separate bidirectional socket-like stream in between filesystem
and its user with both read and write being later performed
simultaneously. And there it is semantically not easy to split the
stream into two separate read-only and write-only channels:

    https://lab.nexedi.com/kirr/wendelin.core/blob/f13aa600/wcfs/wcfs.go#L88-169

Let's fix this regression. The plan is:

1. We can't change nonseekable_open to include &~FMODE_ATOMIC_POS -
   doing so would break many in-kernel nonseekable_open users which
   actually use ppos in read/write handlers.

2. Add stream_open() to kernel to open stream-like non-seekable file
   descriptors. Read and write on such file descriptors would never use
   nor change ppos. And with that property on stream-like files read and
   write will be running without taking f_pos lock - i.e. read and write
   could be running simultaneously.

3. With semantic patch search and convert to stream_open all in-kernel
   nonseekable_open users for which read and write actually do not
   depend on ppos and where there is no other methods in file_operations
   which assume @offset access.

4. Add FOPEN_STREAM to fs/fuse/ and open in-kernel file-descriptors via
   steam_open if that bit is present in filesystem open reply.

   It was tempting to change fs/fuse/ open handler to use stream_open
   instead of nonseekable_open on just FOPEN_NONSEEKABLE flags, but
   grepping through Debian codesearch shows users of FOPEN_NONSEEKABLE,
   and in particular GVFS which actually uses offset in its read and
   write handlers

	https://codesearch.debian.net/search?q=-%3Enonseekable+%3D
	https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1080
	https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1247-1346
	https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1399-1481

   so if we would do such a change it will break a real user.

5. Add stream_open and FOPEN_STREAM handling to stable kernels starting
   from v3.14+ (the kernel where 9c225f2655 first appeared).

   This will allow to patch OSSPD and other FUSE filesystems that
   provide stream-like files to return FOPEN_STREAM | FOPEN_NONSEEKABLE
   in their open handler and this way avoid the deadlock on all kernel
   versions. This should work because fs/fuse/ ignores unknown open
   flags returned from a filesystem and so passing FOPEN_STREAM to a
   kernel that is not aware of this flag cannot hurt. In turn the kernel
   that is not aware of FOPEN_STREAM will be < v3.14 where just
   FOPEN_NONSEEKABLE is sufficient to implement streams without read vs
   write deadlock.

This patch adds stream_open, converts /proc/xen/xenbus to it and adds
semantic patch to automatically locate in-kernel places that are either
required to be converted due to read vs write deadlock, or that are just
safe to be converted because read and write do not use ppos and there
are no other funky methods in file_operations.

Regarding semantic patch I've verified each generated change manually -
that it is correct to convert - and each other nonseekable_open instance
left - that it is either not correct to convert there, or that it is not
converted due to current stream_open.cocci limitations.

The script also does not convert files that should be valid to convert,
but that currently have .llseek = noop_llseek or generic_file_llseek for
unknown reason despite file being opened with nonseekable_open (e.g.
drivers/input/mousedev.c)

Cc: Michael Kerrisk 
Cc: Yongzhi Pan 
Cc: Jonathan Corbet 
Cc: David Vrabel 
Cc: Juergen Gross 
Cc: Miklos Szeredi 
Cc: Tejun Heo 
Cc: Kirill Tkhai 
Cc: Arnd Bergmann 
Cc: Christoph Hellwig 
Cc: Greg Kroah-Hartman 
Cc: Julia Lawall 
Cc: Nikolaus Rath 
Cc: Han-Wen Nienhuys 
Signed-off-by: Kirill Smelkov 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

drm/i915: Fix I915_EXEC_RING_MASK

2019-06-11T10:22:49+00:00

commit d90c06d57027203f73021bb7ddb30b800d65c636 upstream.

This was supposed to be a mask of all known rings, but it is being used
by execbuffer to filter out invalid rings, and so is instead mapping high
unused values onto valid rings. Instead of a mask of all known rings,
we need it to be the mask of all possible rings.

Fixes: 549f7365820a ("drm/i915: Enable SandyBridge blitter ring")
Fixes: de1add360522 ("drm/i915: Decouple execbuf uAPI from internal implementation")
Signed-off-by: Chris Wilson 
Cc: Tvrtko Ursulin 
Cc:  # v4.6+
Reviewed-by: Tvrtko Ursulin 
Link: https://patchwork.freedesktop.org/patch/msgid/20190301140404.26690-21-chris@chris-wilson.co.uk
Signed-off-by: Greg Kroah-Hartman

x86/power: Fix 'nosmt' vs hibernation triple fault during resume

2019-06-11T10:22:48+00:00

commit ec527c318036a65a083ef68d8ba95789d2212246 upstream.

As explained in

	0cc3cd21657b ("cpu/hotplug: Boot HT siblings at least once")

we always, no matter what, have to bring up x86 HT siblings during boot at
least once in order to avoid first MCE bringing the system to its knees.

That means that whenever 'nosmt' is supplied on the kernel command-line,
all the HT siblings are as a result sitting in mwait or cpudile after
going through the online-offline cycle at least once.

This causes a serious issue though when a kernel, which saw 'nosmt' on its
commandline, is going to perform resume from hibernation: if the resume
from the hibernated image is successful, cr3 is flipped in order to point
to the address space of the kernel that is being resumed, which in turn
means that all the HT siblings are all of a sudden mwaiting on address
which is no longer valid.

That results in triple fault shortly after cr3 is switched, and machine
reboots.

Fix this by always waking up all the SMT siblings before initiating the
'restore from hibernation' process; this guarantees that all the HT
siblings will be properly carried over to the resumed kernel waiting in
resume_play_dead(), and acted upon accordingly afterwards, based on the
target kernel configuration.

Symmetricaly, the resumed kernel has to push the SMT siblings to mwait
again in case it has SMT disabled; this means it has to online all
the siblings when resuming (so that they come out of hlt) and offline
them again to let them reach mwait.

Cc: 4.19+  # v4.19+
Debugged-by: Thomas Gleixner 
Fixes: 0cc3cd21657b ("cpu/hotplug: Boot HT siblings at least once")
Signed-off-by: Jiri Kosina 
Acked-by: Pavel Machek 
Reviewed-by: Thomas Gleixner 
Reviewed-by: Josh Poimboeuf 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

rcu: locking and unlocking need to always be at least barriers

2019-06-11T10:22:47+00:00

commit 66be4e66a7f422128748e3c3ef6ee72b20a6197b upstream.

Herbert Xu pointed out that commit bb73c52bad36 ("rcu: Don't disable
preemption for Tiny and Tree RCU readers") was incorrect in making the
preempt_disable/enable() be conditional on CONFIG_PREEMPT_COUNT.

If CONFIG_PREEMPT_COUNT isn't enabled, the preemption enable/disable is
a no-op, but still is a compiler barrier.

And RCU locking still _needs_ that compiler barrier.

It is simply fundamentally not true that RCU locking would be a complete
no-op: we still need to guarantee (for example) that things that can
trap and cause preemption cannot migrate into the RCU locked region.

The way we do that is by making it a barrier.

See for example commit 386afc91144b ("spinlocks and preemption points
need to be at least compiler barriers") from back in 2013 that had
similar issues with spinlocks that become no-ops on UP: they must still
constrain the compiler from moving other operations into the critical
region.

Now, it is true that a lot of RCU operations already use READ_ONCE() and
WRITE_ONCE() (which in practice likely would never be re-ordered wrt
anything remotely interesting), but it is also true that that is not
globally the case, and that it's not even necessarily always possible
(ie bitfields etc).

Reported-by: Herbert Xu 
Fixes: bb73c52bad36 ("rcu: Don't disable preemption for Tiny and Tree RCU readers")
Cc: stable@kernel.org
Cc: Boqun Feng 
Cc: Paul E. McKenney 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

efi/libstub: Unify command line param parsing

2019-06-11T10:22:45+00:00

commit 60f38de7a8d4e816100ceafd1b382df52527bd50 upstream.

Merge the parsing of the command line carried out in arm-stub.c with
the handling in efi_parse_options(). Note that this also fixes the
missing handling of CONFIG_CMDLINE_FORCE=y, in which case the builtin
command line should supersede the one passed by the firmware.

Signed-off-by: Ard Biesheuvel 
Cc: Linus Torvalds 
Cc: Matt Fleming 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: bhe@redhat.com
Cc: bhsharma@redhat.com
Cc: bp@alien8.de
Cc: eugene@hp.com
Cc: evgeny.kalugin@intel.com
Cc: jhugo@codeaurora.org
Cc: leif.lindholm@linaro.org
Cc: linux-efi@vger.kernel.org
Cc: mark.rutland@arm.com
Cc: roy.franz@cavium.com
Cc: rruigrok@codeaurora.org
Link: http://lkml.kernel.org/r/20170404160910.28115-1-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar 
[ardb: fix up merge conflicts with 4.9.180]
Signed-off-by: Ard Biesheuvel 
Signed-off-by: Greg Kroah-Hartman