linux-stable.git/include, branch v4.4.68

block: get rid of blk_integrity_revalidate()

2017-05-14T11:32:59+00:00

commit 19b7ccf8651df09d274671b53039c672a52ad84d upstream.

Commit 25520d55cdb6 ("block: Inline blk_integrity in struct gendisk")
introduced blk_integrity_revalidate(), which seems to assume ownership
of the stable pages flag and unilaterally clears it if no blk_integrity
profile is registered:

    if (bi->profile)
            disk->queue->backing_dev_info->capabilities |=
                    BDI_CAP_STABLE_WRITES;
    else
            disk->queue->backing_dev_info->capabilities &=
                    ~BDI_CAP_STABLE_WRITES;

It's called from revalidate_disk() and rescan_partitions(), making it
impossible to enable stable pages for drivers that support partitions
and don't use blk_integrity: while the call in revalidate_disk() can be
trivially worked around (see zram, which doesn't support partitions and
hence gets away with zram_revalidate_disk()), rescan_partitions() can
be triggered from userspace at any time.  This breaks rbd, where the
ceph messenger is responsible for generating/verifying CRCs.

Since blk_integrity_{un,}register() "must" be used for (un)registering
the integrity profile with the block layer, move BDI_CAP_STABLE_WRITES
setting there.  This way drivers that call blk_integrity_register() and
use integrity infrastructure won't interfere with drivers that don't
but still want stable pages.

Fixes: 25520d55cdb6 ("block: Inline blk_integrity in struct gendisk")
Cc: "Martin K. Petersen" 
Cc: Christoph Hellwig 
Cc: Mike Snitzer 
Tested-by: Dan Williams 
Signed-off-by: Ilya Dryomov 
[idryomov@gmail.com: backport to < 4.11: bdi is embedded in queue]
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

f2fs: sanity check segment count

2017-05-14T11:32:59+00:00

commit b9dd46188edc2f0d1f37328637860bb65a771124 upstream.

F2FS uses 4 bytes to represent block address. As a result, supported
size of disk is 16 TB and it equals to 16 * 1024 * 1024 / 2 segments.

Signed-off-by: Jin Qian 
Signed-off-by: Jaegeuk Kim 
Signed-off-by: Greg Kroah-Hartman

ipv6: reorder ip6_route_dev_notifier after ipv6_dev_notf

2017-05-14T11:32:58+00:00

[ Upstream commit 242d3a49a2a1a71d8eb9f953db1bcaa9d698ce00 ]

For each netns (except init_net), we initialize its null entry
in 3 places:

1) The template itself, as we use kmemdup()
2) Code around dst_init_metrics() in ip6_route_net_init()
3) ip6_route_dev_notify(), which is supposed to initialize it after
   loopback registers

Unfortunately the last one still happens in a wrong order because
we expect to initialize net->ipv6.ip6_null_entry->rt6i_idev to
net->loopback_dev's idev, thus we have to do that after we add
idev to loopback. However, this notifier has priority == 0 same as
ipv6_dev_notf, and ipv6_dev_notf is registered after
ip6_route_dev_notifier so it is called actually after
ip6_route_dev_notifier. This is similar to commit 2f460933f58e
("ipv6: initialize route null entry in addrconf_init()") which
fixes init_net.

Fix it by picking a smaller priority for ip6_route_dev_notifier.
Also, we have to release the refcnt accordingly when unregistering
loopback_dev because device exit functions are called before subsys
exit functions.

Acked-by: David Ahern 
Tested-by: David Ahern 
Signed-off-by: Cong Wang 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipv6: initialize route null entry in addrconf_init()

2017-05-14T11:32:58+00:00

[ Upstream commit 2f460933f58eee3393aba64f0f6d14acb08d1724 ]

Andrey reported a crash on init_net.ipv6.ip6_null_entry->rt6i_idev
since it is always NULL.

This is clearly wrong, we have code to initialize it to loopback_dev,
unfortunately the order is still not correct.

loopback_dev is registered very early during boot, we lose a chance
to re-initialize it in notifier. addrconf_init() is called after
ip6_route_init(), which means we have no chance to correct it.

Fix it by moving this initialization explicitly after
ipv6_add_dev(init_net.loopback_dev) in addrconf_init().

Reported-by: Andrey Konovalov 
Signed-off-by: Cong Wang 
Tested-by: Andrey Konovalov 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

usb: chipidea: Handle extcon events properly

2017-05-14T11:32:56+00:00

commit a89b94b53371bbfa582787c2fa3378000ea4263d upstream.

We're currently emulating the vbus and id interrupts in the OTGSC
read API, but we also need to make sure that if we're handling
the events with extcon that we don't enable the interrupts for
those events in the hardware. Therefore, properly emulate this
register if we're using extcon, but don't enable the interrupts.
This allows me to get my cable connect/disconnect working
properly without getting spurious interrupts on my device that
uses an extcon for these two events.

Acked-by: Peter Chen 
Cc: Greg Kroah-Hartman 
Cc: "Ivan T. Ivanov" 
Fixes: 3ecb3e09b042 ("usb: chipidea: Use extcon framework for VBUS and ID detect")
Signed-off-by: Stephen Boyd 
Signed-off-by: Peter Chen 
Signed-off-by: Greg Kroah-Hartman

mtd: avoid stack overflow in MTD CFI code

2017-05-08T05:46:01+00:00

commit fddcca5107051adf9e4481d2a79ae0616577fd2c upstream.

When map_word gets too large, we use a lot of kernel stack, and for
MTD_MAP_BANK_WIDTH_32, this means we use more than the recommended
1024 bytes in a number of functions:

drivers/mtd/chips/cfi_cmdset_0020.c: In function 'cfi_staa_write_buffers':
drivers/mtd/chips/cfi_cmdset_0020.c:651:1: warning: the frame size of 1336 bytes is larger than 1024 bytes [-Wframe-larger-than=]
drivers/mtd/chips/cfi_cmdset_0020.c: In function 'cfi_staa_erase_varsize':
drivers/mtd/chips/cfi_cmdset_0020.c:972:1: warning: the frame size of 1208 bytes is larger than 1024 bytes [-Wframe-larger-than=]
drivers/mtd/chips/cfi_cmdset_0001.c: In function 'do_write_buffer':
drivers/mtd/chips/cfi_cmdset_0001.c:1835:1: warning: the frame size of 1240 bytes is larger than 1024 bytes [-Wframe-larger-than=]

This can be avoided if all operations on the map word are done
indirectly and the stack gets reused between the calls. We can
mostly achieve this by selecting MTD_COMPLEX_MAPPINGS whenever
MTD_MAP_BANK_WIDTH_32 is set, but for the case that no other
bank width is enabled, we also need to use a non-constant
map_bankwidth() to convince the compiler to use less stack.

Signed-off-by: Arnd Bergmann 
[Brian: this patch mostly achieves its goal by forcing
    MTD_COMPLEX_MAPPINGS (and the accompanying indirection) for 256-bit
    mappings; the rest of the change is mostly a wash, though it helps
    reduce stack size slightly. If we really care about supporting
    256-bit mappings though, we should consider rewriting some of this
    code to avoid keeping and assigning so many 256-bit objects on the
    stack.]
Signed-off-by: Brian Norris 
Signed-off-by: Greg Kroah-Hartman

net: ipv6: RTF_PCPU should not be settable from userspace

2017-05-03T04:19:53+00:00

[ Upstream commit 557c44be917c322860665be3d28376afa84aa936 ]

Andrey reported a fault in the IPv6 route code:

kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Modules linked in:
CPU: 1 PID: 4035 Comm: a.out Not tainted 4.11.0-rc7+ #250
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
task: ffff880069809600 task.stack: ffff880062dc8000
RIP: 0010:ip6_rt_cache_alloc+0xa6/0x560 net/ipv6/route.c:975
RSP: 0018:ffff880062dced30 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: ffff8800670561c0 RCX: 0000000000000006
RDX: 0000000000000003 RSI: ffff880062dcfb28 RDI: 0000000000000018
RBP: ffff880062dced68 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: ffff880062dcfb28 R14: dffffc0000000000 R15: 0000000000000000
FS:  00007feebe37e7c0(0000) GS:ffff88006cb00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000205a0fe4 CR3: 000000006b5c9000 CR4: 00000000000006e0
Call Trace:
 ip6_pol_route+0x1512/0x1f20 net/ipv6/route.c:1128
 ip6_pol_route_output+0x4c/0x60 net/ipv6/route.c:1212
...

Andrey's syzkaller program passes rtmsg.rtmsg_flags with the RTF_PCPU bit
set. Flags passed to the kernel are blindly copied to the allocated
rt6_info by ip6_route_info_create making a newly inserted route appear
as though it is a per-cpu route. ip6_rt_cache_alloc sees the flag set
and expects rt->dst.from to be set - which it is not since it is not
really a per-cpu copy. The subsequent call to __ip6_dst_alloc then
generates the fault.

Fix by checking for the flag and failing with EINVAL.

Fixes: d52d3997f843f ("ipv6: Create percpu rt6_info")
Reported-by: Andrey Konovalov 
Signed-off-by: David Ahern 
Acked-by: Martin KaFai Lau 
Tested-by: Andrey Konovalov 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

mnt: Add a per mount namespace limit on the number of mounts

2017-04-30T03:49:28+00:00

commit d29216842a85c7970c536108e093963f02714498 upstream.

CAI Qian  pointed out that the semantics
of shared subtrees make it possible to create an exponentially
increasing number of mounts in a mount namespace.

    mkdir /tmp/1 /tmp/2
    mount --make-rshared /
    for i in $(seq 1 20) ; do mount --bind /tmp/1 /tmp/2 ; done

Will create create 2^20 or 1048576 mounts, which is a practical problem
as some people have managed to hit this by accident.

As such CVE-2016-6213 was assigned.

Ian Kent  described the situation for autofs users
as follows:

> The number of mounts for direct mount maps is usually not very large because of
> the way they are implemented, large direct mount maps can have performance
> problems. There can be anywhere from a few (likely case a few hundred) to less
> than 10000, plus mounts that have been triggered and not yet expired.
>
> Indirect mounts have one autofs mount at the root plus the number of mounts that
> have been triggered and not yet expired.
>
> The number of autofs indirect map entries can range from a few to the common
> case of several thousand and in rare cases up to between 30000 and 50000. I've
> not heard of people with maps larger than 50000 entries.
>
> The larger the number of map entries the greater the possibility for a large
> number of active mounts so it's not hard to expect cases of a 1000 or somewhat
> more active mounts.

So I am setting the default number of mounts allowed per mount
namespace at 100,000.  This is more than enough for any use case I
know of, but small enough to quickly stop an exponential increase
in mounts.  Which should be perfect to catch misconfigurations and
malfunctioning programs.

For anyone who needs a higher limit this can be changed by writing
to the new /proc/sys/fs/mount-max sysctl.

Tested-by: CAI Qian 
Signed-off-by: "Eric W. Biederman" 
[bwh: Backported to 4.4: adjust context]
Signed-off-by: Ben Hutchings 
Signed-off-by: Greg Kroah-Hartman

crypto: ahash - Fix EINPROGRESS notification callback

2017-04-21T07:30:06+00:00

commit ef0579b64e93188710d48667cb5e014926af9f1b upstream.

The ahash API modifies the request's callback function in order
to clean up after itself in some corner cases (unaligned final
and missing finup).

When the request is complete ahash will restore the original
callback and everything is fine.  However, when the request gets
an EBUSY on a full queue, an EINPROGRESS callback is made while
the request is still ongoing.

In this case the ahash API will incorrectly call its own callback.

This patch fixes the problem by creating a temporary request
object on the stack which is used to relay EINPROGRESS back to
the original completion function.

This patch also adds code to preserve the original flags value.

Fixes: ab6bf4e5e5e4 ("crypto: hash - Fix the pointer voodoo in...")
Reported-by: Sabrina Dubroca 
Tested-by: Sabrina Dubroca 
Signed-off-by: Herbert Xu 
Signed-off-by: Greg Kroah-Hartman

cgroup, kthread: close race window where new kthreads can be migrated to non-root cgroups

2017-04-21T07:30:04+00:00

commit 77f88796cee819b9c4562b0b6b44691b3b7755b1 upstream.

Creation of a kthread goes through a couple interlocked stages between
the kthread itself and its creator.  Once the new kthread starts
running, it initializes itself and wakes up the creator.  The creator
then can further configure the kthread and then let it start doing its
job by waking it up.

In this configuration-by-creator stage, the creator is the only one
that can wake it up but the kthread is visible to userland.  When
altering the kthread's attributes from userland is allowed, this is
fine; however, for cases where CPU affinity is critical,
kthread_bind() is used to first disable affinity changes from userland
and then set the affinity.  This also prevents the kthread from being
migrated into non-root cgroups as that can affect the CPU affinity and
many other things.

Unfortunately, the cgroup side of protection is racy.  While the
PF_NO_SETAFFINITY flag prevents further migrations, userland can win
the race before the creator sets the flag with kthread_bind() and put
the kthread in a non-root cgroup, which can lead to all sorts of
problems including incorrect CPU affinity and starvation.

This bug got triggered by userland which periodically tries to migrate
all processes in the root cpuset cgroup to a non-root one.  Per-cpu
workqueue workers got caught while being created and ended up with
incorrected CPU affinity breaking concurrency management and sometimes
stalling workqueue execution.

This patch adds task->no_cgroup_migration which disallows the task to
be migrated by userland.  kthreadd starts with the flag set making
every child kthread start in the root cgroup with migration
disallowed.  The flag is cleared after the kthread finishes
initialization by which time PF_NO_SETAFFINITY is set if the kthread
should stay in the root cgroup.

It'd be better to wait for the initialization instead of failing but I
couldn't think of a way of implementing that without adding either a
new PF flag, or sleeping and retrying from waiting side.  Even if
userland depends on changing cgroup membership of a kthread, it either
has to be synchronized with kthread_create() or periodically repeat,
so it's unlikely that this would break anything.

v2: Switch to a simpler implementation using a new task_struct bit
    field suggested by Oleg.

Signed-off-by: Tejun Heo 
Suggested-by: Oleg Nesterov 
Cc: Linus Torvalds 
Cc: Andrew Morton 
Cc: Peter Zijlstra (Intel) 
Cc: Thomas Gleixner 
Reported-and-debugged-by: Chris Mason 
Signed-off-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman