linux-stable.git/include, branch v4.4.232 Linux kernel stable tree tcp: allow at most one TLP probe per flight 2020-07-31T14:43:16+00:00 Yuchung Cheng ycheng@google.com 2020-07-23T19:00:06+00:00 4463a6bc4e728b9c8466da42aa8bdde28980060d [ Upstream commit 76be93fc0702322179bb0ea87295d820ee46ad14 ] Previously TLP may send multiple probes of new data in one flight. This happens when the sender is cwnd limited. After the initial TLP containing new data is sent, the sender receives another ACK that acks partial inflight. It may re-arm another TLP timer to send more, if no further ACK returns before the next TLP timeout (PTO) expires. The sender may send in theory a large amount of TLP until send queue is depleted. This only happens if the sender sees such irregular uncommon ACK pattern. But it is generally undesirable behavior during congestion especially. The original TLP design restrict only one TLP probe per inflight as published in "Reducing Web Latency: the Virtue of Gentle Aggression", SIGCOMM 2013. This patch changes TLP to send at most one probe per inflight. Note that if the sender is app-limited, TLP retransmits old data and did not have this issue. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 76be93fc0702322179bb0ea87295d820ee46ad14 ]

Previously TLP may send multiple probes of new data in one
flight. This happens when the sender is cwnd limited. After the
initial TLP containing new data is sent, the sender receives another
ACK that acks partial inflight.  It may re-arm another TLP timer
to send more, if no further ACK returns before the next TLP timeout
(PTO) expires. The sender may send in theory a large amount of TLP
until send queue is depleted. This only happens if the sender sees
such irregular uncommon ACK pattern. But it is generally undesirable
behavior during congestion especially.

The original TLP design restrict only one TLP probe per inflight as
published in "Reducing Web Latency: the Virtue of Gentle Aggression",
SIGCOMM 2013. This patch changes TLP to send at most one probe
per inflight.

Note that if the sender is app-limited, TLP retransmits old data
and did not have this issue.

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: core: Add a helper function to check the validity of EP type in URB 2020-07-22T07:10:05+00:00 Takashi Iwai tiwai@suse.de 2017-10-04T14:15:59+00:00 5547c12c47d01ac44009cc814d2b94cabe6a3cea commit e901b9873876ca30a09253731bd3a6b00c44b5b0 upstream. This patch adds a new helper function to perform a sanity check of the given URB to see whether it contains a valid endpoint. It's a light- weight version of what usb_submit_urb() does, but without the kernel warning followed by the stack trace, just returns an error code. Especially for a driver that doesn't parse the descriptor but fills the URB with the fixed endpoint (e.g. some quirks for non-compliant devices), this kind of check is preferable at the probe phase before actually submitting the urb. Tested-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e901b9873876ca30a09253731bd3a6b00c44b5b0 upstream.

This patch adds a new helper function to perform a sanity check of the
given URB to see whether it contains a valid endpoint.  It's a light-
weight version of what usb_submit_urb() does, but without the kernel
warning followed by the stack trace, just returns an error code.

Especially for a driver that doesn't parse the descriptor but fills
the URB with the fixed endpoint (e.g. some quirks for non-compliant
devices), this kind of check is preferable at the probe phase before
actually submitting the urb.

Tested-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
genetlink: remove genl_bind 2020-07-22T07:10:03+00:00 Sean Tranchetti stranche@codeaurora.org 2020-06-30T17:50:17+00:00 2506cfc94d2e2738cfe6d3a2800f6604c4586438 [ Upstream commit 1e82a62fec613844da9e558f3493540a5b7a7b67 ] A potential deadlock can occur during registering or unregistering a new generic netlink family between the main nl_table_lock and the cb_lock where each thread wants the lock held by the other, as demonstrated below. 1) Thread 1 is performing a netlink_bind() operation on a socket. As part of this call, it will call netlink_lock_table(), incrementing the nl_table_users count to 1. 2) Thread 2 is registering (or unregistering) a genl_family via the genl_(un)register_family() API. The cb_lock semaphore will be taken for writing. 3) Thread 1 will call genl_bind() as part of the bind operation to handle subscribing to GENL multicast groups at the request of the user. It will attempt to take the cb_lock semaphore for reading, but it will fail and be scheduled away, waiting for Thread 2 to finish the write. 4) Thread 2 will call netlink_table_grab() during the (un)registration call. However, as Thread 1 has incremented nl_table_users, it will not be able to proceed, and both threads will be stuck waiting for the other. genl_bind() is a noop, unless a genl_family implements the mcast_bind() function to handle setting up family-specific multicast operations. Since no one in-tree uses this functionality as Cong pointed out, simply removing the genl_bind() function will remove the possibility for deadlock, as there is no attempt by Thread 1 above to take the cb_lock semaphore. Fixes: c380d9a7afff ("genetlink: pass multicast bind/unbind to families") Suggested-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Johannes Berg <johannes.berg@intel.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Sean Tranchetti <stranche@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 1e82a62fec613844da9e558f3493540a5b7a7b67 ]

A potential deadlock can occur during registering or unregistering a
new generic netlink family between the main nl_table_lock and the
cb_lock where each thread wants the lock held by the other, as
demonstrated below.

1) Thread 1 is performing a netlink_bind() operation on a socket. As part
   of this call, it will call netlink_lock_table(), incrementing the
   nl_table_users count to 1.
2) Thread 2 is registering (or unregistering) a genl_family via the
   genl_(un)register_family() API. The cb_lock semaphore will be taken for
   writing.
3) Thread 1 will call genl_bind() as part of the bind operation to handle
   subscribing to GENL multicast groups at the request of the user. It will
   attempt to take the cb_lock semaphore for reading, but it will fail and
   be scheduled away, waiting for Thread 2 to finish the write.
4) Thread 2 will call netlink_table_grab() during the (un)registration
   call. However, as Thread 1 has incremented nl_table_users, it will not
   be able to proceed, and both threads will be stuck waiting for the
   other.

genl_bind() is a noop, unless a genl_family implements the mcast_bind()
function to handle setting up family-specific multicast operations. Since
no one in-tree uses this functionality as Cong pointed out, simply removing
the genl_bind() function will remove the possibility for deadlock, as there
is no attempt by Thread 1 above to take the cb_lock semaphore.

Fixes: c380d9a7afff ("genetlink: pass multicast bind/unbind to families")
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Johannes Berg <johannes.berg@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
net: Added pointer check for dst->ops->neigh_lookup in dst_neigh_lookup_skb 2020-07-22T07:10:03+00:00 Martin Varghese martin.varghese@nokia.com 2020-07-05T08:53:49+00:00 902fb3367b2304ade238fb9e25b211750fc23da8 [ Upstream commit 394de110a73395de2ca4516b0de435e91b11b604 ] The packets from tunnel devices (eg bareudp) may have only metadata in the dst pointer of skb. Hence a pointer check of neigh_lookup is needed in dst_neigh_lookup_skb Kernel crashes when packets from bareudp device is processed in the kernel neighbour subsytem. [ 133.384484] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 133.385240] #PF: supervisor instruction fetch in kernel mode [ 133.385828] #PF: error_code(0x0010) - not-present page [ 133.386603] PGD 0 P4D 0 [ 133.386875] Oops: 0010 [#1] SMP PTI [ 133.387275] CPU: 0 PID: 5045 Comm: ping Tainted: G W 5.8.0-rc2+ #15 [ 133.388052] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 133.391076] RIP: 0010:0x0 [ 133.392401] Code: Bad RIP value. [ 133.394029] RSP: 0018:ffffb79980003d50 EFLAGS: 00010246 [ 133.396656] RAX: 0000000080000102 RBX: ffff9de2fe0d6600 RCX: ffff9de2fe5e9d00 [ 133.399018] RDX: 0000000000000000 RSI: ffff9de2fe5e9d00 RDI: ffff9de2fc21b400 [ 133.399685] RBP: ffff9de2fe5e9d00 R08: 0000000000000000 R09: 0000000000000000 [ 133.400350] R10: ffff9de2fbc6be22 R11: ffff9de2fe0d6600 R12: ffff9de2fc21b400 [ 133.401010] R13: ffff9de2fe0d6628 R14: 0000000000000001 R15: 0000000000000003 [ 133.401667] FS: 00007fe014918740(0000) GS:ffff9de2fec00000(0000) knlGS:0000000000000000 [ 133.402412] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 133.402948] CR2: ffffffffffffffd6 CR3: 000000003bb72000 CR4: 00000000000006f0 [ 133.403611] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 133.404270] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 133.404933] Call Trace: [ 133.405169] <IRQ> [ 133.405367] __neigh_update+0x5a4/0x8f0 [ 133.405734] arp_process+0x294/0x820 [ 133.406076] ? __netif_receive_skb_core+0x866/0xe70 [ 133.406557] arp_rcv+0x129/0x1c0 [ 133.406882] __netif_receive_skb_one_core+0x95/0xb0 [ 133.407340] process_backlog+0xa7/0x150 [ 133.407705] net_rx_action+0x2af/0x420 [ 133.408457] __do_softirq+0xda/0x2a8 [ 133.408813] asm_call_on_stack+0x12/0x20 [ 133.409290] </IRQ> [ 133.409519] do_softirq_own_stack+0x39/0x50 [ 133.410036] do_softirq+0x50/0x60 [ 133.410401] __local_bh_enable_ip+0x50/0x60 [ 133.410871] ip_finish_output2+0x195/0x530 [ 133.411288] ip_output+0x72/0xf0 [ 133.411673] ? __ip_finish_output+0x1f0/0x1f0 [ 133.412122] ip_send_skb+0x15/0x40 [ 133.412471] raw_sendmsg+0x853/0xab0 [ 133.412855] ? insert_pfn+0xfe/0x270 [ 133.413827] ? vvar_fault+0xec/0x190 [ 133.414772] sock_sendmsg+0x57/0x80 [ 133.415685] __sys_sendto+0xdc/0x160 [ 133.416605] ? syscall_trace_enter+0x1d4/0x2b0 [ 133.417679] ? __audit_syscall_exit+0x1d9/0x280 [ 133.418753] ? __prepare_exit_to_usermode+0x5d/0x1a0 [ 133.419819] __x64_sys_sendto+0x24/0x30 [ 133.420848] do_syscall_64+0x4d/0x90 [ 133.421768] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 133.422833] RIP: 0033:0x7fe013689c03 [ 133.423749] Code: Bad RIP value. [ 133.424624] RSP: 002b:00007ffc7288f418 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 133.425940] RAX: ffffffffffffffda RBX: 000056151fc63720 RCX: 00007fe013689c03 [ 133.427225] RDX: 0000000000000040 RSI: 000056151fc63720 RDI: 0000000000000003 [ 133.428481] RBP: 00007ffc72890b30 R08: 000056151fc60500 R09: 0000000000000010 [ 133.429757] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040 [ 133.431041] R13: 000056151fc636e0 R14: 000056151fc616bc R15: 0000000000000080 [ 133.432481] Modules linked in: mpls_iptunnel act_mirred act_tunnel_key cls_flower sch_ingress veth mpls_router ip_tunnel bareudp ip6_udp_tunnel udp_tunnel macsec udp_diag inet_diag unix_diag af_packet_diag netlink_diag binfmt_misc xt_MASQUERADE iptable_nat xt_addrtype xt_conntrack nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc ebtable_filter ebtables overlay ip6table_filter ip6_tables iptable_filter sunrpc ext4 mbcache jbd2 pcspkr i2c_piix4 virtio_balloon joydev ip_tables xfs libcrc32c ata_generic qxl pata_acpi drm_ttm_helper ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm ata_piix libata virtio_net net_failover virtio_console failover virtio_blk i2c_core virtio_pci virtio_ring serio_raw floppy virtio dm_mirror dm_region_hash dm_log dm_mod [ 133.444045] CR2: 0000000000000000 [ 133.445082] ---[ end trace f4aeee1958fd1638 ]--- [ 133.446236] RIP: 0010:0x0 [ 133.447180] Code: Bad RIP value. [ 133.448152] RSP: 0018:ffffb79980003d50 EFLAGS: 00010246 [ 133.449363] RAX: 0000000080000102 RBX: ffff9de2fe0d6600 RCX: ffff9de2fe5e9d00 [ 133.450835] RDX: 0000000000000000 RSI: ffff9de2fe5e9d00 RDI: ffff9de2fc21b400 [ 133.452237] RBP: ffff9de2fe5e9d00 R08: 0000000000000000 R09: 0000000000000000 [ 133.453722] R10: ffff9de2fbc6be22 R11: ffff9de2fe0d6600 R12: ffff9de2fc21b400 [ 133.455149] R13: ffff9de2fe0d6628 R14: 0000000000000001 R15: 0000000000000003 [ 133.456520] FS: 00007fe014918740(0000) GS:ffff9de2fec00000(0000) knlGS:0000000000000000 [ 133.458046] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 133.459342] CR2: ffffffffffffffd6 CR3: 000000003bb72000 CR4: 00000000000006f0 [ 133.460782] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 133.462240] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 133.463697] Kernel panic - not syncing: Fatal exception in interrupt [ 133.465226] Kernel Offset: 0xfa00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 133.467025] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Fixes: aaa0c23cb901 ("Fix dst_neigh_lookup/dst_neigh_lookup_skb return value handling bug") Signed-off-by: Martin Varghese <martin.varghese@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 394de110a73395de2ca4516b0de435e91b11b604 ]

The packets from tunnel devices (eg bareudp) may have only
metadata in the dst pointer of skb. Hence a pointer check of
neigh_lookup is needed in dst_neigh_lookup_skb

Kernel crashes when packets from bareudp device is processed in
the kernel neighbour subsytem.

[  133.384484] BUG: kernel NULL pointer dereference, address: 0000000000000000
[  133.385240] #PF: supervisor instruction fetch in kernel mode
[  133.385828] #PF: error_code(0x0010) - not-present page
[  133.386603] PGD 0 P4D 0
[  133.386875] Oops: 0010 [#1] SMP PTI
[  133.387275] CPU: 0 PID: 5045 Comm: ping Tainted: G        W         5.8.0-rc2+ #15
[  133.388052] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[  133.391076] RIP: 0010:0x0
[  133.392401] Code: Bad RIP value.
[  133.394029] RSP: 0018:ffffb79980003d50 EFLAGS: 00010246
[  133.396656] RAX: 0000000080000102 RBX: ffff9de2fe0d6600 RCX: ffff9de2fe5e9d00
[  133.399018] RDX: 0000000000000000 RSI: ffff9de2fe5e9d00 RDI: ffff9de2fc21b400
[  133.399685] RBP: ffff9de2fe5e9d00 R08: 0000000000000000 R09: 0000000000000000
[  133.400350] R10: ffff9de2fbc6be22 R11: ffff9de2fe0d6600 R12: ffff9de2fc21b400
[  133.401010] R13: ffff9de2fe0d6628 R14: 0000000000000001 R15: 0000000000000003
[  133.401667] FS:  00007fe014918740(0000) GS:ffff9de2fec00000(0000) knlGS:0000000000000000
[  133.402412] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  133.402948] CR2: ffffffffffffffd6 CR3: 000000003bb72000 CR4: 00000000000006f0
[  133.403611] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  133.404270] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  133.404933] Call Trace:
[  133.405169]  <IRQ>
[  133.405367]  __neigh_update+0x5a4/0x8f0
[  133.405734]  arp_process+0x294/0x820
[  133.406076]  ? __netif_receive_skb_core+0x866/0xe70
[  133.406557]  arp_rcv+0x129/0x1c0
[  133.406882]  __netif_receive_skb_one_core+0x95/0xb0
[  133.407340]  process_backlog+0xa7/0x150
[  133.407705]  net_rx_action+0x2af/0x420
[  133.408457]  __do_softirq+0xda/0x2a8
[  133.408813]  asm_call_on_stack+0x12/0x20
[  133.409290]  </IRQ>
[  133.409519]  do_softirq_own_stack+0x39/0x50
[  133.410036]  do_softirq+0x50/0x60
[  133.410401]  __local_bh_enable_ip+0x50/0x60
[  133.410871]  ip_finish_output2+0x195/0x530
[  133.411288]  ip_output+0x72/0xf0
[  133.411673]  ? __ip_finish_output+0x1f0/0x1f0
[  133.412122]  ip_send_skb+0x15/0x40
[  133.412471]  raw_sendmsg+0x853/0xab0
[  133.412855]  ? insert_pfn+0xfe/0x270
[  133.413827]  ? vvar_fault+0xec/0x190
[  133.414772]  sock_sendmsg+0x57/0x80
[  133.415685]  __sys_sendto+0xdc/0x160
[  133.416605]  ? syscall_trace_enter+0x1d4/0x2b0
[  133.417679]  ? __audit_syscall_exit+0x1d9/0x280
[  133.418753]  ? __prepare_exit_to_usermode+0x5d/0x1a0
[  133.419819]  __x64_sys_sendto+0x24/0x30
[  133.420848]  do_syscall_64+0x4d/0x90
[  133.421768]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  133.422833] RIP: 0033:0x7fe013689c03
[  133.423749] Code: Bad RIP value.
[  133.424624] RSP: 002b:00007ffc7288f418 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
[  133.425940] RAX: ffffffffffffffda RBX: 000056151fc63720 RCX: 00007fe013689c03
[  133.427225] RDX: 0000000000000040 RSI: 000056151fc63720 RDI: 0000000000000003
[  133.428481] RBP: 00007ffc72890b30 R08: 000056151fc60500 R09: 0000000000000010
[  133.429757] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040
[  133.431041] R13: 000056151fc636e0 R14: 000056151fc616bc R15: 0000000000000080
[  133.432481] Modules linked in: mpls_iptunnel act_mirred act_tunnel_key cls_flower sch_ingress veth mpls_router ip_tunnel bareudp ip6_udp_tunnel udp_tunnel macsec udp_diag inet_diag unix_diag af_packet_diag netlink_diag binfmt_misc xt_MASQUERADE iptable_nat xt_addrtype xt_conntrack nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc ebtable_filter ebtables overlay ip6table_filter ip6_tables iptable_filter sunrpc ext4 mbcache jbd2 pcspkr i2c_piix4 virtio_balloon joydev ip_tables xfs libcrc32c ata_generic qxl pata_acpi drm_ttm_helper ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm ata_piix libata virtio_net net_failover virtio_console failover virtio_blk i2c_core virtio_pci virtio_ring serio_raw floppy virtio dm_mirror dm_region_hash dm_log dm_mod
[  133.444045] CR2: 0000000000000000
[  133.445082] ---[ end trace f4aeee1958fd1638 ]---
[  133.446236] RIP: 0010:0x0
[  133.447180] Code: Bad RIP value.
[  133.448152] RSP: 0018:ffffb79980003d50 EFLAGS: 00010246
[  133.449363] RAX: 0000000080000102 RBX: ffff9de2fe0d6600 RCX: ffff9de2fe5e9d00
[  133.450835] RDX: 0000000000000000 RSI: ffff9de2fe5e9d00 RDI: ffff9de2fc21b400
[  133.452237] RBP: ffff9de2fe5e9d00 R08: 0000000000000000 R09: 0000000000000000
[  133.453722] R10: ffff9de2fbc6be22 R11: ffff9de2fe0d6600 R12: ffff9de2fc21b400
[  133.455149] R13: ffff9de2fe0d6628 R14: 0000000000000001 R15: 0000000000000003
[  133.456520] FS:  00007fe014918740(0000) GS:ffff9de2fec00000(0000) knlGS:0000000000000000
[  133.458046] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  133.459342] CR2: ffffffffffffffd6 CR3: 000000003bb72000 CR4: 00000000000006f0
[  133.460782] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  133.462240] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  133.463697] Kernel panic - not syncing: Fatal exception in interrupt
[  133.465226] Kernel Offset: 0xfa00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[  133.467025] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

Fixes: aaa0c23cb901 ("Fix dst_neigh_lookup/dst_neigh_lookup_skb return value handling bug")
Signed-off-by: Martin Varghese <martin.varghese@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ALSA: compress: fix partial_drain completion state 2020-07-22T07:10:02+00:00 Vinod Koul vkoul@kernel.org 2020-06-29T13:47:37+00:00 d3a3099389a61c274a926e3a10b1cfc01f72bc7c [ Upstream commit f79a732a8325dfbd570d87f1435019d7e5501c6d ] On partial_drain completion we should be in SNDRV_PCM_STATE_RUNNING state, so set that for partially draining streams in snd_compr_drain_notify() and use a flag for partially draining streams While at it, add locks for stream state change in snd_compr_drain_notify() as well. Fixes: f44f2a5417b2 ("ALSA: compress: fix drain calls blocking other compress functions (v6)") Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20200629134737.105993-4-vkoul@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit f79a732a8325dfbd570d87f1435019d7e5501c6d ]

On partial_drain completion we should be in SNDRV_PCM_STATE_RUNNING
state, so set that for partially draining streams in
snd_compr_drain_notify() and use a flag for partially draining streams

While at it, add locks for stream state change in
snd_compr_drain_notify() as well.

Fixes: f44f2a5417b2 ("ALSA: compress: fix drain calls blocking other compress functions (v6)")
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200629134737.105993-4-vkoul@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
sched/rt: Show the 'sched_rr_timeslice' SCHED_RR timeslice tuning knob in milliseconds 2020-07-09T07:35:08+00:00 Shile Zhang shile.zhang@nokia.com 2017-01-28T14:00:49+00:00 e9bc62b17b65523f8e714348a652fd8993fad833 [ Upstream commit 975e155ed8732cb81f55c021c441ae662dd040b5 ] We added the 'sched_rr_timeslice_ms' SCHED_RR tuning knob in this commit: ce0dbbbb30ae ("sched/rt: Add a tuning knob to allow changing SCHED_RR timeslice") ... which name suggests to users that it's in milliseconds, while in reality it's being set in milliseconds but the result is shown in jiffies. This is obviously confusing when HZ is not 1000, it makes it appear like the value set failed, such as HZ=100: root# echo 100 > /proc/sys/kernel/sched_rr_timeslice_ms root# cat /proc/sys/kernel/sched_rr_timeslice_ms 10 Fix this to be milliseconds all around. Signed-off-by: Shile Zhang <shile.zhang@nokia.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1485612049-20923-1-git-send-email-shile.zhang@nokia.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 975e155ed8732cb81f55c021c441ae662dd040b5 ]

We added the 'sched_rr_timeslice_ms' SCHED_RR tuning knob in this commit:

  ce0dbbbb30ae ("sched/rt: Add a tuning knob to allow changing SCHED_RR timeslice")

... which name suggests to users that it's in milliseconds, while in reality
it's being set in milliseconds but the result is shown in jiffies.

This is obviously confusing when HZ is not 1000, it makes it appear like the
value set failed, such as HZ=100:

  root# echo 100 > /proc/sys/kernel/sched_rr_timeslice_ms
  root# cat /proc/sys/kernel/sched_rr_timeslice_ms
  10

Fix this to be milliseconds all around.

Signed-off-by: Shile Zhang <shile.zhang@nokia.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1485612049-20923-1-git-send-email-shile.zhang@nokia.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
crypto: af_alg - fix use-after-free in af_alg_accept() due to bh_lock_sock() 2020-07-09T07:35:08+00:00 Herbert Xu herbert@gondor.apana.org.au 2020-06-08T06:48:43+00:00 fba0d6b2d4c2a858a6784e8c577bb98da0dd515e commit 34c86f4c4a7be3b3e35aa48bd18299d4c756064d upstream. The locking in af_alg_release_parent is broken as the BH socket lock can only be taken if there is a code-path to handle the case where the lock is owned by process-context. Instead of adding such handling, we can fix this by changing the ref counts to atomic_t. This patch also modifies the main refcnt to include both normal and nokey sockets. This way we don't have to fudge the nokey ref count when a socket changes from nokey to normal. Credits go to Mauricio Faria de Oliveira who diagnosed this bug and sent a patch for it: https://lore.kernel.org/linux-crypto/20200605161657.535043-1-mfo@canonical.com/ Reported-by: Brian Moyles <bmoyles@netflix.com> Reported-by: Mauricio Faria de Oliveira <mfo@canonical.com> Fixes: 37f96694cf73 ("crypto: af_alg - Use bh_lock_sock in...") Cc: <stable@vger.kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 34c86f4c4a7be3b3e35aa48bd18299d4c756064d upstream.

The locking in af_alg_release_parent is broken as the BH socket
lock can only be taken if there is a code-path to handle the case
where the lock is owned by process-context.  Instead of adding
such handling, we can fix this by changing the ref counts to
atomic_t.

This patch also modifies the main refcnt to include both normal
and nokey sockets.  This way we don't have to fudge the nokey
ref count when a socket changes from nokey to normal.

Credits go to Mauricio Faria de Oliveira who diagnosed this bug
and sent a patch for it:

https://lore.kernel.org/linux-crypto/20200605161657.535043-1-mfo@canonical.com/

Reported-by: Brian Moyles <bmoyles@netflix.com>
Reported-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Fixes: 37f96694cf73 ("crypto: af_alg - Use bh_lock_sock in...")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: Disable MSI for HiSilicon Hip06/Hip07 Root Ports 2020-06-30T00:07:59+00:00 Dongdong Liu liudongdong3@huawei.com 2017-02-03T21:02:07+00:00 5e3d9f68f76a316a90387bc37d767d67a7a17658 commit 72f2ff0deb870145a5a2d24cd75b4f9936159a62 upstream. The PCIe Root Port in Hip06/Hip07 SoCs advertises an MSI capability, but it cannot generate MSIs. It can transfer MSI/MSI-X from downstream devices, but does not support MSI/MSI-X itself. Add a quirk to prevent use of MSI/MSI-X by the Root Port. [bhelgaas: changelog, sort vendor ID #define, drop device ID #define] Signed-off-by: Dongdong Liu <liudongdong3@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 72f2ff0deb870145a5a2d24cd75b4f9936159a62 upstream.

The PCIe Root Port in Hip06/Hip07 SoCs advertises an MSI capability, but it
cannot generate MSIs.  It can transfer MSI/MSI-X from downstream devices,
but does not support MSI/MSI-X itself.

Add a quirk to prevent use of MSI/MSI-X by the Root Port.

[bhelgaas: changelog, sort vendor ID #define, drop device ID #define]
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
net: Do not clear the sock TX queue in sk_set_socket() 2020-06-30T00:07:58+00:00 Tariq Toukan tariqt@mellanox.com 2020-06-22T20:26:04+00:00 31394a198cf91f03e676f7fb829361cf91230b0a [ Upstream commit 41b14fb8724d5a4b382a63cb4a1a61880347ccb8 ] Clearing the sock TX queue in sk_set_socket() might cause unexpected out-of-order transmit when called from sock_orphan(), as outstanding packets can pick a different TX queue and bypass the ones already queued. This is undesired in general. More specifically, it breaks the in-order scheduling property guarantee for device-offloaded TLS sockets. Remove the call to sk_tx_queue_clear() in sk_set_socket(), and add it explicitly only where needed. Fixes: e022f0b4a03f ("net: Introduce sk_tx_queue_mapping") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 41b14fb8724d5a4b382a63cb4a1a61880347ccb8 ]

Clearing the sock TX queue in sk_set_socket() might cause unexpected
out-of-order transmit when called from sock_orphan(), as outstanding
packets can pick a different TX queue and bypass the ones already queued.

This is undesired in general. More specifically, it breaks the in-order
scheduling property guarantee for device-offloaded TLS sockets.

Remove the call to sk_tx_queue_clear() in sk_set_socket(), and add it
explicitly only where needed.

Fixes: e022f0b4a03f ("net: Introduce sk_tx_queue_mapping")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sctp: Don't advertise IPv4 addresses if ipv6only is set on the socket 2020-06-30T00:07:58+00:00 Marcelo Ricardo Leitner marcelo.leitner@gmail.com 2020-06-24T20:34:18+00:00 73ec90cc942ece0754a207b3dfecdec7310f59fc [ Upstream commit 471e39df96b9a4c4ba88a2da9e25a126624d7a9c ] If a socket is set ipv6only, it will still send IPv4 addresses in the INIT and INIT_ACK packets. This potentially misleads the peer into using them, which then would cause association termination. The fix is to not add IPv4 addresses to ipv6only sockets. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Tested-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 471e39df96b9a4c4ba88a2da9e25a126624d7a9c ]

If a socket is set ipv6only, it will still send IPv4 addresses in the
INIT and INIT_ACK packets. This potentially misleads the peer into using
them, which then would cause association termination.

The fix is to not add IPv4 addresses to ipv6only sockets.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Tested-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>