linux-stable.git/include, branch v4.19.296

tcp: fix quick-ack counting to count actual ACKs of new data

2023-10-10T19:45:01+00:00

[ Upstream commit 059217c18be6757b95bfd77ba53fb50b48b8a816 ]

This commit fixes quick-ack counting so that it only considers that a
quick-ack has been provided if we are sending an ACK that newly
acknowledges data.

The code was erroneously using the number of data segments in outgoing
skbs when deciding how many quick-ack credits to remove. This logic
does not make sense, and could cause poor performance in
request-response workloads, like RPC traffic, where requests or
responses can be multi-segment skbs.

When a TCP connection decides to send N quick-acks, that is to
accelerate the cwnd growth of the congestion control module
controlling the remote endpoint of the TCP connection. That quick-ack
decision is purely about the incoming data and outgoing ACKs. It has
nothing to do with the outgoing data or the size of outgoing data.

And in particular, an ACK only serves the intended purpose of allowing
the remote congestion control to grow the congestion window quickly if
the ACK is ACKing or SACKing new data.

The fix is simple: only count packets as serving the goal of the
quickack mechanism if they are ACKing/SACKing new data. We can tell
whether this is the case by checking inet_csk_ack_scheduled(), since
we schedule an ACK exactly when we are ACKing/SACKing new data.

Fixes: fc6415bcb0f5 ("[TCP]: Fix quick-ack decrementing with TSO.")
Signed-off-by: Neal Cardwell 
Reviewed-by: Yuchung Cheng 
Reviewed-by: Eric Dumazet 
Link: https://lore.kernel.org/r/20231001151239.1866845-1-ncardwell.sw@gmail.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

ata: libata: disallow dev-initiated LPM transitions to unsupported states

2023-10-10T19:45:00+00:00

commit 24e0e61db3cb86a66824531989f1df80e0939f26 upstream.

In AHCI 1.3.1, the register description for CAP.SSC:
"When cleared to ‘0’, software must not allow the HBA to initiate
transitions to the Slumber state via agressive link power management nor
the PxCMD.ICC field in each port, and the PxSCTL.IPM field in each port
must be programmed to disallow device initiated Slumber requests."

In AHCI 1.3.1, the register description for CAP.PSC:
"When cleared to ‘0’, software must not allow the HBA to initiate
transitions to the Partial state via agressive link power management nor
the PxCMD.ICC field in each port, and the PxSCTL.IPM field in each port
must be programmed to disallow device initiated Partial requests."

Ensure that we always set the corresponding bits in PxSCTL.IPM, such that
a device is not allowed to initiate transitions to power states which are
unsupported by the HBA.

DevSleep is always initiated by the HBA, however, for completeness, set the
corresponding bit in PxSCTL.IPM such that agressive link power management
cannot transition to DevSleep if DevSleep is not supported.

sata_link_scr_lpm() is used by libahci, ata_piix and libata-pmp.
However, only libahci has the ability to read the CAP/CAP2 register to see
if these features are supported. Therefore, in order to not introduce any
regressions on ata_piix or libata-pmp, create flags that indicate that the
respective feature is NOT supported. This way, the behavior for ata_piix
and libata-pmp should remain unchanged.

This change is based on a patch originally submitted by Runa Guo-oc.

Signed-off-by: Niklas Cassel 
Fixes: 1152b2617a6e ("libata: implement sata_link_scr_lpm() and make ata_dev_set_feature() global")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal 
Signed-off-by: Niklas Cassel 
Signed-off-by: Greg Kroah-Hartman

ata: libata-sata: increase PMP SRST timeout to 10s

2023-10-10T19:45:00+00:00

commit 753a4d531bc518633ea88ac0ed02b25a16823d51 upstream.

On certain SATA controllers, softreset fails after wakeup from S2RAM with
the message "softreset failed (1st FIS failed)", sometimes resulting in
drives not being detected again. With the increased timeout, this issue
is avoided. Instead, "softreset failed (device not ready)" is now
logged 1-2 times; this later failure seems to cause fewer problems
however, and the drives are detected reliably once they've spun up and
the probe is retried.

The issue was observed with the primary SATA controller of the QNAP
TS-453B, which is an "Intel Corporation Celeron/Pentium Silver Processor
SATA Controller [8086:31e3] (rev 06)" integrated in the Celeron J4125 CPU,
and the following drives:

- Seagate IronWolf ST12000VN0008
- Seagate IronWolf ST8000NE0004

The SATA controller seems to be more relevant to this issue than the
drives, as the same drives are always detected reliably on the secondary
SATA controller on the same board (an ASMedia 106x) without any "softreset
failed" errors even without the increased timeout.

Fixes: e7d3ef13d52a ("libata: change drive ready wait after hard reset to 5s")
Cc: stable@vger.kernel.org
Signed-off-by: Matthias Schiffer 
Signed-off-by: Damien Le Moal 
Signed-off-by: Greg Kroah-Hartman

bpf: Clarify error expectations from bpf_clone_redirect

2023-10-10T19:44:58+00:00

[ Upstream commit 7cb779a6867fea00b4209bcf6de2f178a743247d ]

Commit 151e887d8ff9 ("veth: Fixing transmit return status for dropped
packets") exposed the fact that bpf_clone_redirect is capable of
returning raw NET_XMIT_XXX return codes.

This is in the conflict with its UAPI doc which says the following:
"0 on success, or a negative error in case of failure."

Update the UAPI to reflect the fact that bpf_clone_redirect can
return positive error numbers, but don't explicitly define
their meaning.

Reported-by: Daniel Borkmann 
Signed-off-by: Stanislav Fomichev 
Signed-off-by: Daniel Borkmann 
Link: https://lore.kernel.org/bpf/20230911194731.286342-1-sdf@google.com
Signed-off-by: Sasha Levin

team: fix null-ptr-deref when team device type is changed

2023-10-10T19:44:57+00:00

[ Upstream commit 492032760127251e5540a5716a70996bacf2a3fd ]

Get a null-ptr-deref bug as follows with reproducer [1].

BUG: kernel NULL pointer dereference, address: 0000000000000228
...
RIP: 0010:vlan_dev_hard_header+0x35/0x140 [8021q]
...
Call Trace:
 
 ? __die+0x24/0x70
 ? page_fault_oops+0x82/0x150
 ? exc_page_fault+0x69/0x150
 ? asm_exc_page_fault+0x26/0x30
 ? vlan_dev_hard_header+0x35/0x140 [8021q]
 ? vlan_dev_hard_header+0x8e/0x140 [8021q]
 neigh_connected_output+0xb2/0x100
 ip6_finish_output2+0x1cb/0x520
 ? nf_hook_slow+0x43/0xc0
 ? ip6_mtu+0x46/0x80
 ip6_finish_output+0x2a/0xb0
 mld_sendpack+0x18f/0x250
 mld_ifc_work+0x39/0x160
 process_one_work+0x1e6/0x3f0
 worker_thread+0x4d/0x2f0
 ? __pfx_worker_thread+0x10/0x10
 kthread+0xe5/0x120
 ? __pfx_kthread+0x10/0x10
 ret_from_fork+0x34/0x50
 ? __pfx_kthread+0x10/0x10
 ret_from_fork_asm+0x1b/0x30

[1]
$ teamd -t team0 -d -c '{"runner": {"name": "loadbalance"}}'
$ ip link add name t-dummy type dummy
$ ip link add link t-dummy name t-dummy.100 type vlan id 100
$ ip link add name t-nlmon type nlmon
$ ip link set t-nlmon master team0
$ ip link set t-nlmon nomaster
$ ip link set t-dummy up
$ ip link set team0 up
$ ip link set t-dummy.100 down
$ ip link set t-dummy.100 master team0

When enslave a vlan device to team device and team device type is changed
from non-ether to ether, header_ops of team device is changed to
vlan_header_ops. That is incorrect and will trigger null-ptr-deref
for vlan->real_dev in vlan_dev_hard_header() because team device is not
a vlan device.

Cache eth_header_ops in team_setup(), then assign cached header_ops to
header_ops of team net device when its type is changed from non-ether
to ether to fix the bug.

Fixes: 1d76efe1577b ("team: add support for non-ethernet devices")
Suggested-by: Hangbin Liu 
Reviewed-by: Hangbin Liu 
Signed-off-by: Ziyang Xuan 
Reviewed-by: Jiri Pirko 
Reviewed-by: Eric Dumazet 
Link: https://lore.kernel.org/r/20230918123011.1884401-1-william.xuanziyang@huawei.com
Signed-off-by: Paolo Abeni 
Signed-off-by: Sasha Levin

net: add atomic_long_t to net_device_stats fields

2023-10-10T19:44:57+00:00

[ Upstream commit 6c1c5097781f563b70a81683ea6fdac21637573b ]

Long standing KCSAN issues are caused by data-race around
some dev->stats changes.

Most performance critical paths already use per-cpu
variables, or per-queue ones.

It is reasonable (and more correct) to use atomic operations
for the slow paths.

This patch adds an union for each field of net_device_stats,
so that we can convert paths that are not yet protected
by a spinlock or a mutex.

netdev_stats_to_stats64() no longer has an #if BITS_PER_LONG==64

Note that the memcpy() we were using on 64bit arches
had no provision to avoid load-tearing,
while atomic_long_read() is providing the needed protection
at no cost.

Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Stable-dep-of: 44bdb313da57 ("net: bridge: use DEV_STATS_INC()")
Signed-off-by: Sasha Levin

hw_breakpoint: fix single-stepping when using bpf_overflow_handler

2023-09-23T08:48:15+00:00

[ Upstream commit d11a69873d9a7435fe6a48531e165ab80a8b1221 ]

Arm platforms use is_default_overflow_handler() to determine if the
hw_breakpoint code should single-step over the breakpoint trigger or
let the custom handler deal with it.

Since bpf_overflow_handler() currently isn't recognized as a default
handler, attaching a BPF program to a PERF_TYPE_BREAKPOINT event causes
it to keep firing (the instruction triggering the data abort exception
is never skipped). For example:

  # bpftrace -e 'watchpoint:0x10000:4:w { print("hit") }' -c ./test
  Attaching 1 probe...
  hit
  hit
  [...]
  ^C

(./test performs a single 4-byte store to 0x10000)

This patch replaces the check with uses_default_overflow_handler(),
which accounts for the bpf_overflow_handler() case by also testing
if one of the perf_event_output functions gets invoked indirectly,
via orig_default_handler.

Signed-off-by: Tomislav Novak 
Tested-by: Samuel Gosselin  # arm64
Reviewed-by: Catalin Marinas 
Acked-by: Alexei Starovoitov 
Link: https://lore.kernel.org/linux-arm-kernel/20220923203644.2731604-1-tnovak@fb.com/
Link: https://lore.kernel.org/r/20230605191923.1219974-1-tnovak@meta.com
Signed-off-by: Will Deacon 
Signed-off-by: Sasha Levin

PCI/ATS: Add inline to pci_prg_resp_pasid_required()

2023-09-23T08:48:11+00:00

commit fff42928ade591969836ff49888d063b829ac888 upstream.

Fix unused function warning when compiled with CONFIG_PCI_PASID
disabled.

Fixes: e5567f5f6762 ("PCI/ATS: Add pci_prg_resp_pasid_required() interface.")
Signed-off-by: Kuppuswamy Sathyanarayanan 
Signed-off-by: Joerg Roedel 
Signed-off-by: Greg Kroah-Hartman

net: handle ARPHRD_PPP in dev_is_mac_header_xmit()

2023-09-23T08:48:11+00:00

commit a4f39c9f14a634e4cd35fcd338c239d11fcc73fc upstream.

The goal is to support a bpf_redirect() from an ethernet device (ingress)
to a ppp device (egress).
The l2 header is added automatically by the ppp driver, thus the ethernet
header should be removed.

CC: stable@vger.kernel.org
Fixes: 27b29f63058d ("bpf: add bpf_redirect() helper")
Signed-off-by: Nicolas Dichtel 
Tested-by: Siwar Zitouni 
Reviewed-by: Guillaume Nault 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

scsi: core: Use 32-bit hostnum in scsi_host_lookup()

2023-09-23T08:48:08+00:00

[ Upstream commit 62ec2092095b678ff89ce4ba51c2938cd1e8e630 ]

Change scsi_host_lookup() hostnum argument type from unsigned short to
unsigned int to match the type used everywhere else.

Fixes: 6d49f63b415c ("[SCSI] Make host_no an unsigned int")
Signed-off-by: Tony Battersby 
Link: https://lore.kernel.org/r/a02497e7-c12b-ef15-47fc-3f0a0b00ffce@cybernetics.com
Reviewed-by: Bart Van Assche 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin