linux-stable.git/include, branch v4.13.3

xfs: evict all inodes involved with log redo item

2017-09-20T06:27:50+00:00

commit 799ea9e9c59949008770aab4e1da87f10e99dbe4 upstream.

When we introduced the bmap redo log items, we set MS_ACTIVE on the
mountpoint and XFS_IRECOVERY on the inode to prevent unlinked inodes
from being truncated prematurely during log recovery.  This also had the
effect of putting linked inodes on the lru instead of evicting them.

Unfortunately, we neglected to find all those unreferenced lru inodes
and evict them after finishing log recovery, which means that we leak
them if anything goes wrong in the rest of xfs_mountfs, because the lru
is only cleaned out on unmount.

Therefore, evict unreferenced inodes in the lru list immediately
after clearing MS_ACTIVE.

Fixes: 17c12bcd30 ("xfs: when replaying bmap operations, don't let unlinked inodes get reaped")
Signed-off-by: Darrick J. Wong 
Cc: viro@ZenIV.linux.org.uk
Reviewed-by: Brian Foster 
Signed-off-by: Greg Kroah-Hartman

x86/mm, mm/hwpoison: Clear PRESENT bit for kernel 1:1 mappings of poison pages

2017-09-20T06:27:48+00:00

commit ce0fa3e56ad20f04d8252353dcd24e924abdafca upstream.

Speculative processor accesses may reference any memory that has a
valid page table entry.  While a speculative access won't generate
a machine check, it will log the error in a machine check bank. That
could cause escalation of a subsequent error since the overflow bit
will be then set in the machine check bank status register.

Code has to be double-plus-tricky to avoid mentioning the 1:1 virtual
address of the page we want to map out otherwise we may trigger the
very problem we are trying to avoid.  We use a non-canonical address
that passes through the usual Linux table walking code to get to the
same "pte".

Thanks to Dave Hansen for reviewing several iterations of this.

Also see:

  http://marc.info/?l=linux-mm&m=149860136413338&w=2

Signed-off-by: Tony Luck 
Cc: Andrew Morton 
Cc: Andy Lutomirski 
Cc: Borislav Petkov 
Cc: Borislav Petkov 
Cc: Brian Gerst 
Cc: Dave Hansen 
Cc: Denys Vlasenko 
Cc: Elliott, Robert (Persistent Memory) 
Cc: H. Peter Anvin 
Cc: Josh Poimboeuf 
Cc: Linus Torvalds 
Cc: Naoya Horiguchi 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170816171803.28342-1-tony.luck@intel.com
Signed-off-by: Ingo Molnar 
Signed-off-by: Greg Kroah-Hartman

udp: drop head states only when all skb references are gone

2017-09-20T06:27:46+00:00

[ Upstream commit ca2c1418efe9f7fe37aa1f355efdf4eb293673ce ]

After commit 0ddf3fb2c43d ("udp: preserve skb->dst if required
for IP options processing") we clear the skb head state as soon
as the skb carrying them is first processed.

Since the same skb can be processed several times when MSG_PEEK
is used, we can end up lacking the required head states, and
eventually oopsing.

Fix this clearing the skb head state only when processing the
last skb reference.

Reported-by: Eric Dumazet 
Fixes: 0ddf3fb2c43d ("udp: preserve skb->dst if required for IP options processing")
Signed-off-by: Paolo Abeni 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

Revert "net: fix percpu memory leaks"

2017-09-20T06:27:46+00:00

[ Upstream commit 5a63643e583b6a9789d7a225ae076fb4e603991c ]

This reverts commit 1d6119baf0610f813eb9d9580eb4fd16de5b4ceb.

After reverting commit 6d7b857d541e ("net: use lib/percpu_counter API
for fragmentation mem accounting") then here is no need for this
fix-up patch.  As percpu_counter is no longer used, it cannot
memory leak it any-longer.

Fixes: 6d7b857d541e ("net: use lib/percpu_counter API for fragmentation mem accounting")
Fixes: 1d6119baf061 ("net: fix percpu memory leaks")
Signed-off-by: Jesper Dangaard Brouer 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

Revert "net: use lib/percpu_counter API for fragmentation mem accounting"

2017-09-20T06:27:46+00:00

[ Upstream commit fb452a1aa3fd4034d7999e309c5466ff2d7005aa ]

This reverts commit 6d7b857d541ecd1d9bd997c97242d4ef94b19de2.

There is a bug in fragmentation codes use of the percpu_counter API,
that can cause issues on systems with many CPUs.

The frag_mem_limit() just reads the global counter (fbc->count),
without considering other CPUs can have upto batch size (130K) that
haven't been subtracted yet.  Due to the 3MBytes lower thresh limit,
this become dangerous at >=24 CPUs (3*1024*1024/130000=24).

The correct API usage would be to use __percpu_counter_compare() which
does the right thing, and takes into account the number of (online)
CPUs and batch size, to account for this and call __percpu_counter_sum()
when needed.

We choose to revert the use of the lib/percpu_counter API for frag
memory accounting for several reasons:

1) On systems with CPUs > 24, the heavier fully locked
   __percpu_counter_sum() is always invoked, which will be more
   expensive than the atomic_t that is reverted to.

Given systems with more than 24 CPUs are becoming common this doesn't
seem like a good option.  To mitigate this, the batch size could be
decreased and thresh be increased.

2) The add_frag_mem_limit+sub_frag_mem_limit pairs happen on the RX
   CPU, before SKBs are pushed into sockets on remote CPUs.  Given
   NICs can only hash on L2 part of the IP-header, the NIC-RXq's will
   likely be limited.  Thus, a fair chance that atomic add+dec happen
   on the same CPU.

Revert note that commit 1d6119baf061 ("net: fix percpu memory leaks")
removed init_frag_mem_limit() and instead use inet_frags_init_net().
After this revert, inet_frags_uninit_net() becomes empty.

Fixes: 6d7b857d541e ("net: use lib/percpu_counter API for fragmentation mem accounting")
Fixes: 1d6119baf061 ("net: fix percpu memory leaks")
Signed-off-by: Jesper Dangaard Brouer 
Acked-by: Florian Westphal 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

cs5536: add support for IDE controller variant

2017-09-09T15:39:27+00:00

commit 591b6bb605785c12a21e8b07a08a277065b655a5 upstream.

Several legacy devices such as Geode-based Cisco ASA appliances
and DB800 development board do possess CS5536 IDE controller
with different PCI id than existing one. Using pata_generic is
not always feasible as at least DB800 requires MSR quirk from
pata_cs5536 to be used with vendor firmware.

Signed-off-by: Andrey Korolyov 
Signed-off-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman

workqueue: Fix flag collision

2017-09-09T15:39:26+00:00

commit fbf1c41fc0f4d3574ac2377245efd666c1fa3075 upstream.

Commit 0a94efb5acbb ("workqueue: implicit ordered attribute should be
overridable") introduced a __WQ_ORDERED_EXPLICIT flag but gave it the
same value as __WQ_LEGACY.  I don't believe these were intended to
mean the same thing, so renumber __WQ_ORDERED_EXPLICIT.

Fixes: 0a94efb5acbb ("workqueue: implicit ordered attribute should be ...")
Signed-off-by: Ben Hutchings 
Signed-off-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman

ANDROID: binder: add padding to binder_fd_array_object.

2017-09-09T15:39:18+00:00

commit 5cdcf4c6a638591ec0e98c57404a19e7f9997567 upstream.

binder_fd_array_object starts with a 4-byte header,
followed by a few fields that are 8 bytes when
ANDROID_BINDER_IPC_32BIT=N.

This can cause alignment issues in a 64-bit kernel
with a 32-bit userspace, as on x86_32 an 8-byte primitive
may be aligned to a 4-byte address. Pad with a __u32
to fix this.

Signed-off-by: Martijn Coenen 
Signed-off-by: Greg Kroah-Hartman

Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2017-09-03T16:23:23+00:00

Pull perf fixes from Thomas Gleixner:

 - Prevent a potential inconistency in the perf user space access which
   might lead to evading sanity checks.

 - Prevent perf recording function trace entries twice

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/ftrace: Fix double traces of perf on ftrace:function
  perf/core: Fix potential double-fetch bug

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2017-09-01T19:49:03+00:00

Pull networking fixes from David Miller:

 1) Fix handling of pinned BPF map nodes in hash of maps, from Daniel
    Borkmann.

 2) IPSEC ESP error paths leak memory, from Steffen Klassert.

 3) We need an RCU grace period before freeing fib6_node objects, from
    Wei Wang.

 4) Must check skb_put_padto() return value in HSR driver, from FLorian
    Fainelli.

 5) Fix oops on PHY probe failure in ftgmac100 driver, from Andrew
    Jeffery.

 6) Fix infinite loop in UDP queue when using SO_PEEK_OFF, from Eric
    Dumazet.

 7) Use after free when tcf_chain_destroy() called multiple times, from
    Jiri Pirko.

 8) Fix KSZ DSA tag layer multiple free of SKBS, from Florian Fainelli.

 9) Fix leak of uninitialized memory in sctp_get_sctp_info(),
    inet_diag_msg_sctpladdrs_fill() and inet_diag_msg_sctpaddrs_fill().
    From Stefano Brivio.

10) L2TP tunnel refcount fixes from Guillaume Nault.

11) Don't leak UDP secpath in udp_set_dev_scratch(), from Yossi
    Kauperman.

12) Revert a PHY layer change wrt. handling of PHY_HALTED state in
    phy_stop_machine(), it causes regressions for multiple people. From
    Florian Fainelli.

13) When packets are sent out of br0 we have to clear the
    offload_fwdq_mark value.

14) Several NULL pointer deref fixes in packet schedulers when their
    ->init() routine fails. From Nikolay Aleksandrov.

15) Aquantium devices cannot checksum offload correctly when the packet
    is <= 60 bytes. From Pavel Belous.

16) Fix vnet header access past end of buffer in AF_PACKET, from
    Benjamin Poirier.

17) Double free in probe error paths of nfp driver, from Dan Carpenter.

18) QOS capability not checked properly in DCB init paths of mlx5
    driver, from Huy Nguyen.

19) Fix conflicts between firmware load failure and health_care timer in
    mlx5, also from Huy Nguyen.

20) Fix dangling page pointer when DMA mapping errors occur in mlx5,
    from Eran Ben ELisha.

21) ->ndo_setup_tc() in bnxt_en driver doesn't count rings properly,
    from Michael Chan.

22) Missing MSIX vector free in bnxt_en, also from Michael Chan.

23) Refcount leak in xfrm layer when using sk_policy, from Lorenzo
    Colitti.

24) Fix copy of uninitialized data in qlge driver, from Arnd Bergmann.

25) bpf_setsockopts() erroneously always returns -EINVAL even on
    success. Fix from Yuchung Cheng.

26) tipc_rcv() needs to linearize the SKB before parsing the inner
    headers, from Parthasarathy Bhuvaragan.

27) Fix deadlock between link status updates and link removal in netvsc
    driver, from Stephen Hemminger.

28) Missed locking of page fragment handling in ESP output, from Steffen
    Klassert.

29) Fix refcnt leak in ebpf congestion control code, from Sabrina
    Dubroca.

30) sxgbe_probe_config_dt() doesn't check devm_kzalloc()'s return value,
    from Christophe Jaillet.

31) Fix missing ipv6 rx_dst_cookie update when rx_dst is updated during
    early demux, from Paolo Abeni.

32) Several info leaks in xfrm_user layer, from Mathias Krause.

33) Fix out of bounds read in cxgb4 driver, from Stefano Brivio.

34) Properly propagate obsolete state of route upwards in ipv6 so that
    upper holders like xfrm can see it. From Xin Long.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (118 commits)
  udp: fix secpath leak
  bridge: switchdev: Clear forward mark when transmitting packet
  mlxsw: spectrum: Forbid linking to devices that have uppers
  wl1251: add a missing spin_lock_init()
  Revert "net: phy: Correctly process PHY_HALTED in phy_stop_machine()"
  net: dsa: bcm_sf2: Fix number of CFP entries for BCM7278
  kcm: do not attach PF_KCM sockets to avoid deadlock
  sch_tbf: fix two null pointer dereferences on init failure
  sch_sfq: fix null pointer dereference on init failure
  sch_netem: avoid null pointer deref on init failure
  sch_fq_codel: avoid double free on init failure
  sch_cbq: fix null pointer dereferences on init failure
  sch_hfsc: fix null pointer deref and double free on init failure
  sch_hhf: fix null pointer dereference on init failure
  sch_multiq: fix double free on init failure
  sch_htb: fix crash on init failure
  net/mlx5e: Fix CQ moderation mode not set properly
  net/mlx5e: Fix inline header size for small packets
  net/mlx5: E-Switch, Unload the representors in the correct order
  net/mlx5e: Properly resolve TC offloaded ipv6 vxlan tunnel source address
  ...