linux-stable.git/include, branch v4.1.8 Linux kernel stable tree fs: create and use seq_show_option for escaping 2015-09-21T17:05:45+00:00 Kees Cook keescook@chromium.org 2015-09-04T22:44:57+00:00 d3b428f0361d6dcbe7c6665ae0a824517a0b1ca9 commit a068acf2ee77693e0bf39d6e07139ba704f461c3 upstream. Many file systems that implement the show_options hook fail to correctly escape their output which could lead to unescaped characters (e.g. new lines) leaking into /proc/mounts and /proc/[pid]/mountinfo files. This could lead to confusion, spoofed entries (resulting in things like systemd issuing false d-bus "mount" notifications), and who knows what else. This looks like it would only be the root user stepping on themselves, but it's possible weird things could happen in containers or in other situations with delegated mount privileges. Here's an example using overlay with setuid fusermount trusting the contents of /proc/mounts (via the /etc/mtab symlink). Imagine the use of "sudo" is something more sneaky: $ BASE="ovl" $ MNT="$BASE/mnt" $ LOW="$BASE/lower" $ UP="$BASE/upper" $ WORK="$BASE/work/ 0 0 none /proc fuse.pwn user_id=1000" $ mkdir -p "$LOW" "$UP" "$WORK" $ sudo mount -t overlay -o "lowerdir=$LOW,upperdir=$UP,workdir=$WORK" none /mnt $ cat /proc/mounts none /root/ovl/mnt overlay rw,relatime,lowerdir=ovl/lower,upperdir=ovl/upper,workdir=ovl/work/ 0 0 none /proc fuse.pwn user_id=1000 0 0 $ fusermount -u /proc $ cat /proc/mounts cat: /proc/mounts: No such file or directory This fixes the problem by adding new seq_show_option and seq_show_option_n helpers, and updating the vulnerable show_option handlers to use them as needed. Some, like SELinux, need to be open coded due to unusual existing escape mechanisms. [akpm@linux-foundation.org: add lost chunk, per Kees] [keescook@chromium.org: seq_show_option should be using const parameters] Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Acked-by: Jan Kara <jack@suse.com> Acked-by: Paul Moore <paul@paul-moore.com> Cc: J. R. Okajima <hooanon05g@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a068acf2ee77693e0bf39d6e07139ba704f461c3 upstream.

Many file systems that implement the show_options hook fail to correctly
escape their output which could lead to unescaped characters (e.g.  new
lines) leaking into /proc/mounts and /proc/[pid]/mountinfo files.  This
could lead to confusion, spoofed entries (resulting in things like
systemd issuing false d-bus "mount" notifications), and who knows what
else.  This looks like it would only be the root user stepping on
themselves, but it's possible weird things could happen in containers or
in other situations with delegated mount privileges.

Here's an example using overlay with setuid fusermount trusting the
contents of /proc/mounts (via the /etc/mtab symlink).  Imagine the use
of "sudo" is something more sneaky:

  $ BASE="ovl"
  $ MNT="$BASE/mnt"
  $ LOW="$BASE/lower"
  $ UP="$BASE/upper"
  $ WORK="$BASE/work/ 0 0
  none /proc fuse.pwn user_id=1000"
  $ mkdir -p "$LOW" "$UP" "$WORK"
  $ sudo mount -t overlay -o "lowerdir=$LOW,upperdir=$UP,workdir=$WORK" none /mnt
  $ cat /proc/mounts
  none /root/ovl/mnt overlay rw,relatime,lowerdir=ovl/lower,upperdir=ovl/upper,workdir=ovl/work/ 0 0
  none /proc fuse.pwn user_id=1000 0 0
  $ fusermount -u /proc
  $ cat /proc/mounts
  cat: /proc/mounts: No such file or directory

This fixes the problem by adding new seq_show_option and
seq_show_option_n helpers, and updating the vulnerable show_option
handlers to use them as needed.  Some, like SELinux, need to be open
coded due to unusual existing escape mechanisms.

[akpm@linux-foundation.org: add lost chunk, per Kees]
[keescook@chromium.org: seq_show_option should be using const parameters]
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Acked-by: Jan Kara <jack@suse.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Cc: J. R. Okajima <hooanon05g@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ACPI, PCI: Penalize legacy IRQ used by ACPI SCI 2015-09-21T17:05:44+00:00 Jiang Liu jiang.liu@linux.intel.com 2015-08-21T07:36:23+00:00 f4e4aaa5b1c9ad0ce9370444f566b972fb988349 commit 5d0ddfebb93069061880fc57ee4ba7246bd1e1ee upstream. Nick Meier reported a regression with HyperV that " After rebooting the VM, the following messages are logged in syslog when trying to load the tulip driver: tulip: Linux Tulip drivers version 1.1.15 (Feb 27, 2007) tulip: 0000:00:0a.0: PCI INT A: failed to register GSI tulip: Cannot enable tulip board #0, aborting tulip: probe of 0000:00:0a.0 failed with error -16 Errors occur in 3.19.0 kernel Works in 3.17 kernel. " According to the ACPI dump file posted by Nick at https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1440072 The ACPI MADT table includes an interrupt source overridden entry for ACPI SCI: [236h 0566 1] Subtable Type : 02 <Interrupt Source Override> [237h 0567 1] Length : 0A [238h 0568 1] Bus : 00 [239h 0569 1] Source : 09 [23Ah 0570 4] Interrupt : 00000009 [23Eh 0574 2] Flags (decoded below) : 000D Polarity : 1 Trigger Mode : 3 And in DSDT table, we have _PRT method to define PCI interrupts, which eventually goes to: Name (PRSA, ResourceTemplate () { IRQ (Level, ActiveLow, Shared, ) {3,4,5,7,9,10,11,12,14,15} }) Name (PRSB, ResourceTemplate () { IRQ (Level, ActiveLow, Shared, ) {3,4,5,7,9,10,11,12,14,15} }) Name (PRSC, ResourceTemplate () { IRQ (Level, ActiveLow, Shared, ) {3,4,5,7,9,10,11,12,14,15} }) Name (PRSD, ResourceTemplate () { IRQ (Level, ActiveLow, Shared, ) {3,4,5,7,9,10,11,12,14,15} }) According to the MADT and DSDT tables, IRQ 9 may be used for: 1) ACPI SCI in level, high mode 2) PCI legacy IRQ in level, low mode So there's a conflict in polarity setting for IRQ 9. Prior to commit cd68f6bd53cf ("x86, irq, acpi: Get rid of special handling of GSI for ACPI SCI"), ACPI SCI is handled specially and there's no check for conflicts between ACPI SCI and PCI legagy IRQ. And it seems that the HyperV hypervisor doesn't make use of the polarity configuration in IOAPIC entry, so it just works. Commit cd68f6bd53cf gets rid of the specially handling of ACPI SCI, and then the pin attribute checking code discloses the conflicts between ACPI SCI and PCI legacy IRQ on HyperV virtual machine, and rejects the request to assign IRQ9 to PCI devices. So penalize legacy IRQ used by ACPI SCI and mark it unusable if ACPI SCI attributes conflict with PCI IRQ attributes. Please refer to following links for more information: https://bugzilla.kernel.org/show_bug.cgi?id=101301 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1440072 Fixes: cd68f6bd53cf ("x86, irq, acpi: Get rid of special handling of GSI for ACPI SCI") Reported-and-tested-by: Nick Meier <nmeier@microsoft.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5d0ddfebb93069061880fc57ee4ba7246bd1e1ee upstream.

Nick Meier reported a regression with HyperV that "
  After rebooting the VM, the following messages are logged in syslog
  when trying to load the tulip driver:
    tulip: Linux Tulip drivers version 1.1.15 (Feb 27, 2007)
    tulip: 0000:00:0a.0: PCI INT A: failed to register GSI
    tulip: Cannot enable tulip board #0, aborting
    tulip: probe of 0000:00:0a.0 failed with error -16
  Errors occur in 3.19.0 kernel
  Works in 3.17 kernel.
"

According to the ACPI dump file posted by Nick at
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1440072

The ACPI MADT table includes an interrupt source overridden entry for
ACPI SCI:
[236h 0566  1]                Subtable Type : 02 <Interrupt Source Override>
[237h 0567  1]                       Length : 0A
[238h 0568  1]                          Bus : 00
[239h 0569  1]                       Source : 09
[23Ah 0570  4]                    Interrupt : 00000009
[23Eh 0574  2]        Flags (decoded below) : 000D
                                   Polarity : 1
                               Trigger Mode : 3

And in DSDT table, we have _PRT method to define PCI interrupts, which
eventually goes to:
        Name (PRSA, ResourceTemplate ()
        {
            IRQ (Level, ActiveLow, Shared, )
                {3,4,5,7,9,10,11,12,14,15}
        })
        Name (PRSB, ResourceTemplate ()
        {
            IRQ (Level, ActiveLow, Shared, )
                {3,4,5,7,9,10,11,12,14,15}
        })
        Name (PRSC, ResourceTemplate ()
        {
            IRQ (Level, ActiveLow, Shared, )
                {3,4,5,7,9,10,11,12,14,15}
        })
        Name (PRSD, ResourceTemplate ()
        {
            IRQ (Level, ActiveLow, Shared, )
                {3,4,5,7,9,10,11,12,14,15}
        })

According to the MADT and DSDT tables, IRQ 9 may be used for:
 1) ACPI SCI in level, high mode
 2) PCI legacy IRQ in level, low mode
So there's a conflict in polarity setting for IRQ 9.

Prior to commit cd68f6bd53cf ("x86, irq, acpi: Get rid of special
handling of GSI for ACPI SCI"), ACPI SCI is handled specially and
there's no check for conflicts between ACPI SCI and PCI legagy IRQ.
And it seems that the HyperV hypervisor doesn't make use of the
polarity configuration in IOAPIC entry, so it just works.

Commit cd68f6bd53cf gets rid of the specially handling of ACPI SCI,
and then the pin attribute checking code discloses the conflicts
between ACPI SCI and PCI legacy IRQ on HyperV virtual machine,
and rejects the request to assign IRQ9 to PCI devices.

So penalize legacy IRQ used by ACPI SCI and mark it unusable if ACPI
SCI attributes conflict with PCI IRQ attributes.

Please refer to following links for more information:
https://bugzilla.kernel.org/show_bug.cgi?id=101301
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1440072

Fixes: cd68f6bd53cf ("x86, irq, acpi: Get rid of special handling of GSI for ACPI SCI")
Reported-and-tested-by: Nick Meier <nmeier@microsoft.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: Add dev_flags bit to access VPD through function 0 2015-09-21T17:05:33+00:00 Mark Rustad mark.d.rustad@intel.com 2015-07-13T18:40:02+00:00 91a37c794cf2cf7ec1f9afc4cbf4a118df7e085e commit 932c435caba8a2ce473a91753bad0173269ef334 upstream. Add a dev_flags bit, PCI_DEV_FLAGS_VPD_REF_F0, to access VPD through function 0 to provide VPD access on other functions. This is for hardware devices that provide copies of the same VPD capability registers in multiple functions. Because the kernel expects that each function has its own registers, both the locking and the state tracking are affected by VPD accesses to different functions. On such devices for example, if a VPD write is performed on function 0, *any* later attempt to read VPD from any other function of that device will hang. This has to do with how the kernel tracks the expected value of the F bit per function. Concurrent accesses to different functions of the same device can not only hang but also corrupt both read and write VPD data. When hangs occur, typically the error message: vpd r/w failed. This is likely a firmware bug on this device. will be seen. Never set this bit on function 0 or there will be an infinite recursion. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 932c435caba8a2ce473a91753bad0173269ef334 upstream.

Add a dev_flags bit, PCI_DEV_FLAGS_VPD_REF_F0, to access VPD through
function 0 to provide VPD access on other functions.  This is for hardware
devices that provide copies of the same VPD capability registers in
multiple functions.  Because the kernel expects that each function has its
own registers, both the locking and the state tracking are affected by VPD
accesses to different functions.

On such devices for example, if a VPD write is performed on function 0,
*any* later attempt to read VPD from any other function of that device will
hang.  This has to do with how the kernel tracks the expected value of the
F bit per function.

Concurrent accesses to different functions of the same device can not only
hang but also corrupt both read and write VPD data.

When hangs occur, typically the error message:

  vpd r/w failed.  This is likely a firmware bug on this device.

will be seen.

Never set this bit on function 0 or there will be an infinite recursion.

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
iio: Add inverse unit conversion macros 2015-09-21T17:05:28+00:00 Lars-Peter Clausen lars@metafoo.de 2015-08-05T13:38:14+00:00 db783fa06defd4f908861a83d602c33f29af86e9 commit c689a923c867eac40ed3826c1d9328edea8b6bc7 upstream. Add inverse unit conversion macro to convert from standard IIO units to units that might be used by some devices. Those are useful in combination with scale factors that are specified as IIO_VAL_FRACTIONAL. Typically the denominator for those specifications will contain the maximum raw value the sensor will generate and the numerator the value it maps to in a specific unit. Sometimes datasheets specify those in different units than the standard IIO units (e.g. degree/s instead of rad/s) and so we need to do a unit conversion. From a mathematical point of view it does not make a difference whether we apply the unit conversion to the numerator or the inverse unit conversion to the denominator since (x / y) / z = x / (y * z). But as the denominator is typically a larger value and we are rounding both the numerator and denominator to integer values using the later method gives us a better precision (E.g. the relative error is smaller if we round 8000.3 to 8000 rather than rounding 8.3 to 8). This is where in inverse unit conversion macros will be used. Marked for stable as used by some upcoming fixes. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c689a923c867eac40ed3826c1d9328edea8b6bc7 upstream.

Add inverse unit conversion macro to convert from standard IIO units to
units that might be used by some devices.

Those are useful in combination with scale factors that are specified as
IIO_VAL_FRACTIONAL. Typically the denominator for those specifications will
contain the maximum raw value the sensor will generate and the numerator
the value it maps to in a specific unit. Sometimes datasheets specify those
in different units than the standard IIO units (e.g. degree/s instead of
rad/s) and so we need to do a unit conversion.

From a mathematical point of view it does not make a difference whether we
apply the unit conversion to the numerator or the inverse unit conversion
to the denominator since (x / y) / z = x / (y * z). But as the denominator
is typically a larger value and we are rounding both the numerator and
denominator to integer values using the later method gives us a better
precision (E.g. the relative error is smaller if we round 8000.3 to 8000
rather than rounding 8.3 to 8).

This is where in inverse unit conversion macros will be used.

Marked for stable as used by some upcoming fixes.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
genirq: Introduce irq_chip_set_type_parent() helper 2015-09-13T16:07:51+00:00 Grygorii Strashko grygorii.strashko@ti.com 2015-08-14T12:20:26+00:00 0c7e8b8a0a4c216d5f9d1b6115858f70ede814ed commit b7560de198222994374c1340a389f12d5efb244a upstream. This helper is required for irq chips which do not implement a irq_set_type callback and need to call down the irq domain hierarchy for the actual trigger type change. This helper is required to fix further wreckage caused by the conversion of TI OMAP to hierarchical irq domains and therefor tagged for stable. [ tglx: Massaged changelog ] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: <linux@arm.linux.org.uk> Cc: <nsekhar@ti.com> Cc: <jason@lakedaemon.net> Cc: <balbi@ti.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: <tony@atomide.com> Cc: <marc.zyngier@arm.com> Cc: stable@vger.kernel.org # 4.1 Link: http://lkml.kernel.org/r/1439554830-19502-3-git-send-email-grygorii.strashko@ti.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b7560de198222994374c1340a389f12d5efb244a upstream.

This helper is required for irq chips which do not implement a
irq_set_type callback and need to call down the irq domain hierarchy
for the actual trigger type change.

This helper is required to fix further wreckage caused by the
conversion of TI OMAP to hierarchical irq domains and therefor tagged
for stable.

[ tglx: Massaged changelog ]

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: <linux@arm.linux.org.uk>
Cc: <nsekhar@ti.com>
Cc: <jason@lakedaemon.net>
Cc: <balbi@ti.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: <tony@atomide.com>
Cc: <marc.zyngier@arm.com>
Cc: stable@vger.kernel.org # 4.1
Link: http://lkml.kernel.org/r/1439554830-19502-3-git-send-email-grygorii.strashko@ti.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert "libata: Implement NCQ autosense" 2015-09-13T16:07:46+00:00 Tejun Heo tj@kernel.org 2015-08-03T15:46:39+00:00 4cd8e7b8c016b3ba1104341fa86c000af33850aa commit 74a80d67b8316eb3fbeb73dafc060a5a0a708587 upstream. This reverts commit 42b966fbf35da9c87f08d98f9b8978edf9e717cf. As implemented, ACS-4 sense reporting for ATA devices bypasses error diagnosis and handling in libata degrading EH behavior significantly. Revert the related changes for now. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 74a80d67b8316eb3fbeb73dafc060a5a0a708587 upstream.

This reverts commit 42b966fbf35da9c87f08d98f9b8978edf9e717cf.

As implemented, ACS-4 sense reporting for ATA devices bypasses error
diagnosis and handling in libata degrading EH behavior significantly.
Revert the related changes for now.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert "libata: Implement support for sense data reporting" 2015-09-13T16:07:46+00:00 Tejun Heo tj@kernel.org 2015-08-03T15:45:34+00:00 0a72deb0923c023b3e84087a5ae2a94fd4daf43c commit 84ded2f8e7dda336fc2fb3570726ceb3b3b3590f upstream. This reverts commit fe7173c206de63fc28475ee6ae42ff95c05692de. As implemented, ACS-4 sense reporting for ATA devices bypasses error diagnosis and handling in libata degrading EH behavior significantly. Revert the related changes for now. ATA_ID_COMMAND_SET_3/4 constants are not reverted as they're used by later changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 84ded2f8e7dda336fc2fb3570726ceb3b3b3590f upstream.

This reverts commit fe7173c206de63fc28475ee6ae42ff95c05692de.

As implemented, ACS-4 sense reporting for ATA devices bypasses error
diagnosis and handling in libata degrading EH behavior significantly.
Revert the related changes for now.

ATA_ID_COMMAND_SET_3/4 constants are not reverted as they're used by
later changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert "libata-eh: Set 'information' field for autosense" 2015-09-13T16:07:46+00:00 Tejun Heo tj@kernel.org 2015-08-03T15:41:33+00:00 e344b9213af5de206f78bf5b8789351dc4cbabef commit fe16d4f202c59a560533a223bc6375739ee30944 upstream. This reverts commit a1524f226a02aa6edebd90ae0752e97cfd78b159. As implemented, ACS-4 sense reporting for ATA devices bypasses error diagnosis and handling in libata degrading EH behavior significantly. Revert the related changes for now. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit fe16d4f202c59a560533a223bc6375739ee30944 upstream.

This reverts commit a1524f226a02aa6edebd90ae0752e97cfd78b159.

As implemented, ACS-4 sense reporting for ATA devices bypasses error
diagnosis and handling in libata degrading EH behavior significantly.
Revert the related changes for now.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/radeon: add new OLAND pci id 2015-09-13T16:07:41+00:00 Alex Deucher alexander.deucher@amd.com 2015-08-10T19:28:49+00:00 39d202573c4d5ec3b3a3930b31dc0c621e771414 commit e037239e5e7b61007763984aa35a8329596d8c88 upstream. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e037239e5e7b61007763984aa35a8329596d8c88 upstream.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mtd: nand: Fix NAND_USE_BOUNCE_BUFFER flag conflict 2015-08-17T03:52:24+00:00 Scott Wood scottwood@freescale.com 2015-06-27T00:43:58+00:00 be9a404609b44c0fd35b40491d387ee5646da2d1 commit 5f867db63473f32cce1b868e281ebd42a41f8fad upstream. Commit 66507c7bc8895f0da6b ("mtd: nand: Add support to use nand_base poi databuf as bounce buffer") added a flag NAND_USE_BOUNCE_BUFFER using the same bit value as the existing NAND_BUSWIDTH_AUTO. Cc: Kamal Dasu <kdasu.kdev@gmail.com> Fixes: 66507c7bc8895f0da6b ("mtd: nand: Add support to use nand_base poi databuf as bounce buffer") Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5f867db63473f32cce1b868e281ebd42a41f8fad upstream.

Commit 66507c7bc8895f0da6b ("mtd: nand: Add support to use nand_base
poi databuf as bounce buffer") added a flag NAND_USE_BOUNCE_BUFFER
using the same bit value as the existing NAND_BUSWIDTH_AUTO.

Cc: Kamal Dasu <kdasu.kdev@gmail.com>
Fixes: 66507c7bc8895f0da6b ("mtd: nand: Add support to use nand_base
	poi databuf as bounce buffer")
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>