linux-stable.git/include, branch v4.0.5

drm/radeon: add new bonaire pci id

2015-06-06T15:21:07+00:00

commit fcf3b54282e4c5a95a1f45f67558bc105acdbc6a upstream.

Signed-off-by: Alex Deucher 
Signed-off-by: Greg Kroah-Hartman

gfp: add __GFP_NOACCOUNT

2015-06-06T15:21:05+00:00

commit 8f4fc071b1926d0b20336e2b3f8ab85c94c734c5 upstream.

Not all kmem allocations should be accounted to memcg.  The following
patch gives an example when accounting of a certain type of allocations to
memcg can effectively result in a memory leak.  This patch adds the
__GFP_NOACCOUNT flag which if passed to kmalloc and friends will force the
allocation to go through the root cgroup.  It will be used by the next
patch.

Note, since in case of kmemleak enabled each kmalloc implies yet another
allocation from the kmemleak_object cache, we add __GFP_NOACCOUNT to
gfp_kmemleak_mask.

Alternatively, we could introduce a per kmem cache flag disabling
accounting for all allocations of a particular kind, but (a) we would not
be able to bypass accounting for kmalloc then and (b) a kmem cache with
this flag set could not be merged with a kmem cache without this flag,
which would increase the number of global caches and therefore
fragmentation even if the memory cgroup controller is not used.

Despite its generic name, currently __GFP_NOACCOUNT disables accounting
only for kmem allocations while user page allocations are always charged.
To catch abusing of this flag, a warning is issued on an attempt of
passing it to mem_cgroup_try_charge.

Signed-off-by: Vladimir Davydov 
Cc: Tejun Heo 
Cc: Johannes Weiner 
Cc: Michal Hocko 
Cc: Christoph Lameter 
Cc: Pekka Enberg 
Cc: David Rientjes 
Cc: Joonsoo Kim 
Cc: Greg Thelen 
Cc: Greg Kroah-Hartman 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

sched: Handle priority boosted tasks proper in setscheduler()

2015-06-06T15:21:04+00:00

commit 0782e63bc6fe7e2d3408d250df11d388b7799c6b upstream.

Ronny reported that the following scenario is not handled correctly:

	T1 (prio = 10)
	   lock(rtmutex);

	T2 (prio = 20)
	   lock(rtmutex)
	      boost T1

	T1 (prio = 20)
	   sys_set_scheduler(prio = 30)
	   T1 prio = 30
	   ....
	   sys_set_scheduler(prio = 10)
	   T1 prio = 30

The last step is wrong as T1 should now be back at prio 20.

Commit c365c292d059 ("sched: Consider pi boosting in setscheduler()")
only handles the case where a boosted tasks tries to lower its
priority.

Fix it by taking the new effective priority into account for the
decision whether a change of the priority is required.

Reported-by: Ronny Meeus 
Tested-by: Steven Rostedt 
Signed-off-by: Thomas Gleixner 
Signed-off-by: Peter Zijlstra (Intel) 
Reviewed-by: Steven Rostedt 
Cc: Borislav Petkov 
Cc: H. Peter Anvin 
Cc: Mike Galbraith 
Fixes: c365c292d059 ("sched: Consider pi boosting in setscheduler()")
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1505051806060.4225@nanos
Signed-off-by: Ingo Molnar 
Signed-off-by: Greg Kroah-Hartman

libata: Ignore spurious PHY event on LPM policy change

2015-06-06T15:21:02+00:00

commit 09c5b4803a80a5451d950d6a539d2eb311dc0fb1 upstream.

When the LPM policy is set to ATA_LPM_MAX_POWER, the device might
generate a spurious PHY event that cuases errors on the link.
Ignore this event if it occured within 10s after the policy change.

The timeout was chosen observing that on a Dell XPS13 9333 these
spurious events can occur up to roughly 6s after the policy change.

Link: http://lkml.kernel.org/g/3352987.ugV1Ipy7Z5@xps13
Signed-off-by: Gabriele Mazzotta 
Signed-off-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman

libata: Add helper to determine when PHY events should be ignored

2015-06-06T15:21:02+00:00

commit 8393b811f38acdf7fd8da2028708edad3e68ce1f upstream.

This is a preparation commit that will allow to add other criteria
according to which PHY events should be dropped.

Signed-off-by: Gabriele Mazzotta 
Signed-off-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman

pty: Fix input race when closing

2015-06-06T15:21:01+00:00

commit 1a48632ffed61352a7810ce089dc5a8bcd505a60 upstream.

A read() from a pty master may mistakenly indicate EOF (errno == -EIO)
after the pty slave has closed, even though input data remains to be read.
For example,

       pty slave       |        input worker        |    pty master
                       |                            |
                       |                            |   n_tty_read()
pty_write()            |                            |     input avail? no
  add data             |                            |     sleep
  schedule worker  --->|                            |     .
                       |---> flush_to_ldisc()       |     .
pty_close()            |       fill read buffer     |     .
  wait for worker      |       wakeup reader    --->|     .
                       |       read buffer full?    |---> input avail ? yes
                       |<---   yes - exit worker    |     copy 4096 bytes to user
  TTY_OTHER_CLOSED <---|                            |<--- kick worker
                       |                            |

		                **** New read() before worker starts ****

                       |                            |   n_tty_read()
                       |                            |     input avail? no
                       |                            |     TTY_OTHER_CLOSED? yes
                       |                            |     return -EIO

Several conditions are required to trigger this race:
1. the ldisc read buffer must become full so the input worker exits
2. the read() count parameter must be >= 4096 so the ldisc read buffer
   is empty
3. the subsequent read() occurs before the kicked worker has processed
   more input

However, the underlying cause of the race is that data is pipelined, while
tty state is not; ie., data already written by the pty slave end is not
yet visible to the pty master end, but state changes by the pty slave end
are visible to the pty master end immediately.

Pipeline the TTY_OTHER_CLOSED state through input worker to the reader.
1. Introduce TTY_OTHER_DONE which is set by the input worker when
   TTY_OTHER_CLOSED is set and either the input buffers are flushed or
   input processing has completed. Readers/polls are woken when
   TTY_OTHER_DONE is set.
2. Reader/poll checks TTY_OTHER_DONE instead of TTY_OTHER_CLOSED.
3. A new input worker is started from pty_close() after setting
   TTY_OTHER_CLOSED, which ensures the TTY_OTHER_DONE state will be
   set if the last input worker is already finished (or just about to
   exit).

Remove tty_flush_to_ldisc(); no in-tree callers.

Fixes: 52bce7f8d4fc ("pty, n_tty: Simplify input processing on final close")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96311
BugLink: http://bugs.launchpad.net/bugs/1429756
Reported-by: Andy Whitcroft 
Reported-by: H.J. Lu 
Signed-off-by: Peter Hurley 
Signed-off-by: Greg Kroah-Hartman

xen/events: don't bind non-percpu VIRQs with percpu chip

2015-06-06T15:20:52+00:00

commit 77bb3dfdc0d554befad58fdefbc41be5bc3ed38a upstream.

A non-percpu VIRQ (e.g., VIRQ_CONSOLE) may be freed on a different
VCPU than it is bound to.  This can result in a race between
handle_percpu_irq() and removing the action in __free_irq() because
handle_percpu_irq() does not take desc->lock.  The interrupt handler
sees a NULL action and oopses.

Only use the percpu chip/handler for per-CPU VIRQs (like VIRQ_TIMER).

  # cat /proc/interrupts | grep virq
   40:      87246          0  xen-percpu-virq      timer0
   44:          0          0  xen-percpu-virq      debug0
   47:          0      20995  xen-percpu-virq      timer1
   51:          0          0  xen-percpu-virq      debug1
   69:          0          0   xen-dyn-virq      xen-pcpu
   74:          0          0   xen-dyn-virq      mce
   75:         29          0   xen-dyn-virq      hvc_console

Signed-off-by: David Vrabel 
Signed-off-by: Greg Kroah-Hartman

ktime: Fix ktime_divns to do signed division

2015-06-06T15:20:49+00:00

commit f7bcb70ebae0dcdb5a2d859b09e4465784d99029 upstream.

It was noted that the 32bit implementation of ktime_divns()
was doing unsigned division and didn't properly handle
negative values.

And when a ktime helper was changed to utilize
ktime_divns, it caused a regression on some IR blasters.
See the following bugzilla for details:
  https://bugzilla.redhat.com/show_bug.cgi?id=1200353

This patch fixes the problem in ktime_divns by checking
and preserving the sign bit, and then reapplying it if
appropriate after the division, it also changes the return
type to a s64 to make it more obvious this is expected.

Nicolas also pointed out that negative dividers would
cause infinite loops on 32bit systems, negative dividers
is unlikely for users of this function, but out of caution
this patch adds checks for negative dividers for both
32-bit (BUG_ON) and 64-bit(WARN_ON) versions to make sure
no such use cases creep in.

[ tglx: Hand an u64 to do_div() to avoid the compiler warning ]

Fixes: 166afb64511e 'ktime: Sanitize ktime_to_us/ms conversion'
Reported-and-tested-by: Trevor Cordes 
Signed-off-by: John Stultz 
Acked-by: Nicolas Pitre 
Cc: Ingo Molnar 
Cc: Josh Boyer 
Cc: One Thousand Gnomes 
Link: http://lkml.kernel.org/r/1431118043-23452-1-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

fs_pin: Allow for the possibility that m_list or s_list go unused.

2015-06-06T15:20:47+00:00

commit 820f9f147dcce2602eefd9b575bbbd9ea14f0953 upstream.

This is needed to support lazily umounting locked mounts.  Because the
entire unmounted subtree needs to stay together until there are no
users with references to any part of the subtree.

To support this guarantee that the fs_pin m_list and s_list nodes
are initialized by initializing them in init_fs_pin allowing
for the possibility that pin_insert_group does not touch them.

Further use hlist_del_init in pin_remove so that there is
a hlist_unhashed test before the list we attempt to update
the previous list item.

Signed-off-by: "Eric W. Biederman" 
Signed-off-by: Greg Kroah-Hartman

ACPICA: Tables: Change acpi_find_root_pointer() to use acpi_physical_address.

2015-05-17T16:55:10+00:00

commit f254e3c57b9d952e987502aefa0804c177dd2503 upstream.

ACPICA commit 7d9fd64397d7c38899d3dc497525f6e6b044e0e3

OSPMs like Linux expect an acpi_physical_address returning value from
acpi_find_root_pointer(). This triggers warnings if sizeof (acpi_size) doesn't
equal to sizeof (acpi_physical_address):
  drivers/acpi/osl.c:275:3: warning: passing argument 1 of 'acpi_find_root_pointer' from incompatible pointer type [enabled by default]
  In file included from include/acpi/acpi.h:64:0,
                   from include/linux/acpi.h:36,
                   from drivers/acpi/osl.c:41:
  include/acpi/acpixf.h:433:1: note: expected 'acpi_size *' but argument is of type 'acpi_physical_address *'
This patch corrects acpi_find_root_pointer().

Link: https://github.com/acpica/acpica/commit/7d9fd643
Signed-off-by: Lv Zheng 
Signed-off-by: Bob Moore 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Dirk Behme 
Signed-off-by: George G. Davis 
Signed-off-by: Greg Kroah-Hartman