linux-stable.git/include, branch v3.2.65

tcp: be more strict before accepting ECN negociation

2014-12-14T16:24:00+00:00

commit bd14b1b2e29bd6812597f896dde06eaf7c6d2f24 upstream.

It appears some networks play bad games with the two bits reserved for
ECN. This can trigger false congestion notifications and very slow
transferts.

Since RFC 3168 (6.1.1) forbids SYN packets to carry CT bits, we can
disable TCP ECN negociation if it happens we receive mangled CT bits in
the SYN packet.

Signed-off-by: Eric Dumazet 
Cc: Perry Lorier 
Cc: Matt Mathis 
Cc: Yuchung Cheng 
Cc: Neal Cardwell 
Cc: Wilmer van der Gaast 
Cc: Ankur Jain 
Cc: Tom Herbert 
Cc: Dave Täht 
Acked-by: Neal Cardwell 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings 
Cc: Florian Westphal

mm, thp: fix collapsing of hugepages on madvise

2014-12-14T16:23:52+00:00

commit 6d50e60cd2edb5a57154db5a6f64eef5aa59b751 upstream.

If an anonymous mapping is not allowed to fault thp memory and then
madvise(MADV_HUGEPAGE) is used after fault, khugepaged will never
collapse this memory into thp memory.

This occurs because the madvise(2) handler for thp, hugepage_madvise(),
clears VM_NOHUGEPAGE on the stack and it isn't stored in vma->vm_flags
until the final action of madvise_behavior().  This causes the
khugepaged_enter_vma_merge() to be a no-op in hugepage_madvise() when
the vma had previously had VM_NOHUGEPAGE set.

Fix this by passing the correct vma flags to the khugepaged mm slot
handler.  There's no chance khugepaged can run on this vma until after
madvise_behavior() returns since we hold mm->mmap_sem.

It would be possible to clear VM_NOHUGEPAGE directly from vma->vm_flags
in hugepage_advise(), but I didn't want to introduce special case
behavior into madvise_behavior().  I think it's best to just let it
always set vma->vm_flags itself.

Signed-off-by: David Rientjes 
Reported-by: Suleiman Souhlal 
Cc: "Kirill A. Shutemov" 
Cc: Andrea Arcangeli 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
[bwh: Backported to 3.2: adjust context, indentation]
Signed-off-by: Ben Hutchings

drm/radeon: remove invalid pci id

2014-12-14T16:23:52+00:00

commit 8c3e434769b1707fd2d24de5a2eb25fedc634c4a upstream.

0x4c6e is a secondary device id so should not be used
by the driver.

Noticed-by: Mark Kettenis 
Signed-off-by: Alex Deucher 
Signed-off-by: Ben Hutchings

random: add and use memzero_explicit() for clearing data

2014-12-14T16:23:49+00:00

commit d4c5efdb97773f59a2b711754ca0953f24516739 upstream.

zatimend has reported that in his environment (3.16/gcc4.8.3/corei7)
memset() calls which clear out sensitive data in extract_{buf,entropy,
entropy_user}() in random driver are being optimized away by gcc.

Add a helper memzero_explicit() (similarly as explicit_bzero() variants)
that can be used in such cases where a variable with sensitive data is
being cleared out in the end. Other use cases might also be in crypto
code. [ I have put this into lib/string.c though, as it's always built-in
and doesn't need any dependencies then. ]

Fixes kernel bugzilla: 82041

Reported-by: zatimend@hotmail.co.uk
Signed-off-by: Daniel Borkmann 
Acked-by: Hannes Frederic Sowa 
Cc: Alexey Dobriyan 
Signed-off-by: Theodore Ts'o 
[bwh: Backported to 3.2:
 - extract_buf() needs to use this for the 'extract' array as well
 - Adjust context]
Signed-off-by: Ben Hutchings

compiler: Define OPTIMIZER_HIDE_VAR

2014-12-14T16:23:49+00:00

Part of upstream commit fe8c8a126806 ('crypto: more robust
crypto_memneq'), needed by commit d4c5efdb9777 ('random: add and use
memzero_explicit() for clearing data').

kernel: add support for gcc 5

2014-12-14T16:23:48+00:00

commit 71458cfc782eafe4b27656e078d379a34e472adf upstream.

We're missing include/linux/compiler-gcc5.h which is required now
because gcc branched off to v5 in trunk.

Just copy the relevant bits out of include/linux/compiler-gcc4.h,
no new code is added as of now.

This fixes a build error when using gcc 5.

Signed-off-by: Sasha Levin 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Ben Hutchings

block: fix alignment_offset math that assumes io_min is a power-of-2

2014-12-14T16:23:47+00:00

commit b8839b8c55f3fdd60dc36abcda7e0266aff7985c upstream.

The math in both blk_stack_limits() and queue_limit_alignment_offset()
assume that a block device's io_min (aka minimum_io_size) is always a
power-of-2.  Fix the math such that it works for non-power-of-2 io_min.

This issue (of alignment_offset != 0) became apparent when testing
dm-thinp with a thinp blocksize that matches a RAID6 stripesize of
1280K.  Commit fdfb4c8c1 ("dm thin: set minimum_io_size to pool's data
block size") unlocked the potential for alignment_offset != 0 due to
the dm-thin-pool's io_min possibly being a non-power-of-2.

Signed-off-by: Mike Snitzer 
Acked-by: Martin K. Petersen 
Signed-off-by: Jens Axboe 
Signed-off-by: Ben Hutchings

vfs: fix data corruption when blocksize < pagesize for mmaped data

2014-12-14T16:23:46+00:00

commit 90a8020278c1598fafd071736a0846b38510309c upstream.

->page_mkwrite() is used by filesystems to allocate blocks under a page
which is becoming writeably mmapped in some process' address space. This
allows a filesystem to return a page fault if there is not enough space
available, user exceeds quota or similar problem happens, rather than
silently discarding data later when writepage is called.

However VFS fails to call ->page_mkwrite() in all the cases where
filesystems need it when blocksize < pagesize. For example when
blocksize = 1024, pagesize = 4096 the following is problematic:
  ftruncate(fd, 0);
  pwrite(fd, buf, 1024, 0);
  map = mmap(NULL, 1024, PROT_WRITE, MAP_SHARED, fd, 0);
  map[0] = 'a';       ----> page_mkwrite() for index 0 is called
  ftruncate(fd, 10000); /* or even pwrite(fd, buf, 1, 10000) */
  mremap(map, 1024, 10000, 0);
  map[4095] = 'a';    ----> no page_mkwrite() called

At the moment ->page_mkwrite() is called, filesystem can allocate only
one block for the page because i_size == 1024. Otherwise it would create
blocks beyond i_size which is generally undesirable. But later at
->writepage() time, we also need to store data at offset 4095 but we
don't have block allocated for it.

This patch introduces a helper function filesystems can use to have
->page_mkwrite() called at all the necessary moments.

Signed-off-by: Jan Kara 
Signed-off-by: Theodore Ts'o 
[bwh: Backported to 3.2:
 - Adjust context
 - truncate_setsize() already has an oldsize variable]
Signed-off-by: Ben Hutchings

USB: Add device quirk for ASUS T100 Base Station keyboard

2014-12-14T16:23:43+00:00

commit ddbe1fca0bcb87ca8c199ea873a456ca8a948567 upstream.

This full-speed USB device generates spurious remote wakeup event
as soon as USB_DEVICE_REMOTE_WAKEUP feature is set. As the result,
Linux can't enter system suspend and S0ix power saving modes once
this keyboard is used.

This patch tries to introduce USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk.
With this quirk set, wakeup capability will be ignored during
device configure.

This patch could be back-ported to kernels as old as 2.6.39.

Signed-off-by: Lu Baolu 
Acked-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

net: sctp: fix panic on duplicate ASCONF chunks

2014-11-05T20:27:48+00:00

commit b69040d8e39f20d5215a03502a8e8b4c6ab78395 upstream.

When receiving a e.g. semi-good formed connection scan in the
form of ...

  -------------- INIT[ASCONF; ASCONF_ACK] ------------->
  <----------- INIT-ACK[ASCONF; ASCONF_ACK] ------------
  -------------------- COOKIE-ECHO -------------------->
  <-------------------- COOKIE-ACK ---------------------
  ---------------- ASCONF_a; ASCONF_b ----------------->

... where ASCONF_a equals ASCONF_b chunk (at least both serials
need to be equal), we panic an SCTP server!

The problem is that good-formed ASCONF chunks that we reply with
ASCONF_ACK chunks are cached per serial. Thus, when we receive a
same ASCONF chunk twice (e.g. through a lost ASCONF_ACK), we do
not need to process them again on the server side (that was the
idea, also proposed in the RFC). Instead, we know it was cached
and we just resend the cached chunk instead. So far, so good.

Where things get nasty is in SCTP's side effect interpreter, that
is, sctp_cmd_interpreter():

While incoming ASCONF_a (chunk = event_arg) is being marked
!end_of_packet and !singleton, and we have an association context,
we do not flush the outqueue the first time after processing the
ASCONF_ACK singleton chunk via SCTP_CMD_REPLY. Instead, we keep it
queued up, although we set local_cork to 1. Commit 2e3216cd54b1
changed the precedence, so that as long as we get bundled, incoming
chunks we try possible bundling on outgoing queue as well. Before
this commit, we would just flush the output queue.

Now, while ASCONF_a's ASCONF_ACK sits in the corked outq, we
continue to process the same ASCONF_b chunk from the packet. As
we have cached the previous ASCONF_ACK, we find it, grab it and
do another SCTP_CMD_REPLY command on it. So, effectively, we rip
the chunk->list pointers and requeue the same ASCONF_ACK chunk
another time. Since we process ASCONF_b, it's correctly marked
with end_of_packet and we enforce an uncork, and thus flush, thus
crashing the kernel.

Fix it by testing if the ASCONF_ACK is currently pending and if
that is the case, do not requeue it. When flushing the output
queue we may relink the chunk for preparing an outgoing packet,
but eventually unlink it when it's copied into the skb right
before transmission.

Joint work with Vlad Yasevich.

Fixes: 2e3216cd54b1 ("sctp: Follow security requirement of responding with 1 packet")
Signed-off-by: Daniel Borkmann 
Signed-off-by: Vlad Yasevich 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings