linux-stable.git/include, branch v3.2.54

inet: fix addr_len/msg->msg_namelen assignment in recv_error and rxpmtu functions

2014-01-03T04:33:33+00:00

[ Upstream commit 85fbaa75037d0b6b786ff18658ddf0b4014ce2a4 ]

Commit bceaa90240b6019ed73b49965eac7d167610be69 ("inet: prevent leakage
of uninitialized memory to user in recv syscalls") conditionally updated
addr_len if the msg_name is written to. The recv_error and rxpmtu
functions relied on the recvmsg functions to set up addr_len before.

As this does not happen any more we have to pass addr_len to those
functions as well and set it to the size of the corresponding sockaddr
length.

This broke traceroute and such.

Fixes: bceaa90240b6 ("inet: prevent leakage of uninitialized memory to user in recv syscalls")
Reported-by: Brad Spengler 
Reported-by: Tom Labanowski
Cc: mpb 
Cc: David S. Miller 
Cc: Eric Dumazet 
Signed-off-by: Hannes Frederic Sowa 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

net: rework recvmsg handler msg_name and msg_namelen logic

2014-01-03T04:33:33+00:00

[ Upstream commit f3d3342602f8bcbf37d7c46641cb9bca7618eb1c ]

This patch now always passes msg->msg_namelen as 0. recvmsg handlers must
set msg_namelen to the proper size <= sizeof(struct sockaddr_storage)
to return msg_name to the user.

This prevents numerous uninitialized memory leaks we had in the
recvmsg handlers and makes it harder for new code to accidentally leak
uninitialized memory.

Optimize for the case recvfrom is called with NULL as address. We don't
need to copy the address at all, so set it to NULL before invoking the
recvmsg handler. We can do so, because all the recvmsg handlers must
cope with the case a plain read() is called on them. read() also sets
msg_name to NULL.

Also document these changes in include/linux/net.h as suggested by David
Miller.

Changes since RFC:

Set msg->msg_name = NULL if user specified a NULL in msg_name but had a
non-null msg_namelen in verify_iovec/verify_compat_iovec. This doesn't
affect sendto as it would bail out earlier while trying to copy-in the
address. It also more naturally reflects the logic by the callers of
verify_iovec.

With this change in place I could remove "
if (!uaddr || msg_sys->msg_namelen == 0)
	msg->msg_name = NULL
".

This change does not alter the user visible error logic as we ignore
msg_namelen as long as msg_name is NULL.

Also remove two unnecessary curly brackets in ___sys_recvmsg and change
comments to netdev style.

Cc: David Miller 
Suggested-by: Eric Dumazet 
Signed-off-by: Hannes Frederic Sowa 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

random32: fix off-by-one in seeding requirement

2014-01-03T04:33:32+00:00

[ Upstream commit 51c37a70aaa3f95773af560e6db3073520513912 ]

For properly initialising the Tausworthe generator [1], we have
a strict seeding requirement, that is, s1 > 1, s2 > 7, s3 > 15.

Commit 697f8d0348 ("random32: seeding improvement") introduced
a __seed() function that imposes boundary checks proposed by the
errata paper [2] to properly ensure above conditions.

However, we're off by one, as the function is implemented as:
"return (x < m) ? x + m : x;", and called with __seed(X, 1),
__seed(X, 7), __seed(X, 15). Thus, an unwanted seed of 1, 7, 15
would be possible, whereas the lower boundary should actually
be of at least 2, 8, 16, just as GSL does. Fix this, as otherwise
an initialization with an unwanted seed could have the effect
that Tausworthe's PRNG properties cannot not be ensured.

Note that this PRNG is *not* used for cryptography in the kernel.

 [1] http://www.iro.umontreal.ca/~lecuyer/myftp/papers/tausme.ps
 [2] http://www.iro.umontreal.ca/~lecuyer/myftp/papers/tausme2.ps

Joint work with Hannes Frederic Sowa.

Fixes: 697f8d0348a6 ("random32: seeding improvement")
Cc: Stephen Hemminger 
Cc: Florian Weimer 
Cc: Theodore Ts'o 
Signed-off-by: Daniel Borkmann 
Signed-off-by: Hannes Frederic Sowa 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

x86, build, icc: Remove uninitialized_var() from compiler-intel.h

2014-01-03T04:33:30+00:00

commit 503cf95c061a0551eb684da364509297efbe55d9 upstream.

When compiling with icc,  ends up included
because the icc environment defines __GNUC__.  Thus, we neither need
nor want to have this macro defined in both compiler-gcc.h and
compiler-intel.h, and the fact that they are inconsistent just makes
the compiler spew warnings.

Reported-by: Sunil K. Pandey 
Cc: Kevin B. Smith 
Signed-off-by: H. Peter Anvin 
Link: http://lkml.kernel.org/n/tip-0mbwou1zt7pafij09b897lg3@git.kernel.org
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

ALSA: memalloc.h - fix wrong truncation of dma_addr_t

2014-01-03T04:33:29+00:00

commit 932e9dec380c67ec15ac3eb073bb55797d8b4801 upstream.

When running a 32bit kernel the hda_intel driver is still reporting
a 64bit dma_mask if the HW supports it.

From sound/pci/hda/hda_intel.c:

        /* allow 64bit DMA address if supported by H/W */
        if ((gcap & ICH6_GCAP_64OK) && !pci_set_dma_mask(pci, DMA_BIT_MASK(64)))
                pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(64));
        else {
                pci_set_dma_mask(pci, DMA_BIT_MASK(32));
                pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(32));
        }

which means when there is a call to dma_alloc_coherent from
snd_malloc_dev_pages a machine address bigger than 32bit can be returned.
This can be true in particular if running  the 32bit kernel as a pv dom0
under the Xen Hypervisor or PAE on bare metal.

The problem is that when calling setup_bdle to program the BLE the
dma_addr_t returned from the dma_alloc_coherent is wrongly truncated
from snd_sgbuf_get_addr if running a 32bit kernel:

static inline dma_addr_t snd_sgbuf_get_addr(struct snd_dma_buffer *dmab,
                                           size_t offset)
{
        struct snd_sg_buf *sgbuf = dmab->private_data;
        dma_addr_t addr = sgbuf->table[offset >> PAGE_SHIFT].addr;
        addr &= PAGE_MASK;
        return addr + offset % PAGE_SIZE;
}

where PAGE_MASK in a 32bit kernel is zeroing the upper 32bit af addr.

Without this patch the HW will fetch the 32bit truncated address,
which is not the one obtained from dma_alloc_coherent and will result
to a non working audio but can corrupt host memory at a random location.

The current patch apply to v3.13-rc3-74-g6c843f5

Signed-off-by: Stefano Panella 
Reviewed-by: Frediano Ziglio 
Signed-off-by: Takashi Iwai 
Signed-off-by: Ben Hutchings

crypto: scatterwalk - Use sg_chain_ptr on chain entries

2014-01-03T04:33:29+00:00

commit 389a5390583a18e45bc4abd4439291abec5e7a63 upstream.

Now that scatterwalk_sg_chain sets the chain pointer bit the sg_page
call in scatterwalk_sg_next hits a BUG_ON when CONFIG_DEBUG_SG is
enabled. Use sg_chain_ptr instead of sg_page on a chain entry.

Signed-off-by: Tom Lendacky 
Signed-off-by: Herbert Xu 
Signed-off-by: Ben Hutchings

crypto: scatterwalk - Set the chain pointer indication bit

2014-01-03T04:33:26+00:00

commit 41da8b5adba77e22584f8b45f9641504fa885308 upstream.

The scatterwalk_crypto_chain function invokes the scatterwalk_sg_chain
function to chain two scatterlists, but the chain pointer indication
bit is not set.  When the resulting scatterlist is used, for example,
by sg_nents to count the number of scatterlist entries, a segfault occurs
because sg_nents does not follow the chain pointer to the chained scatterlist.

Update scatterwalk_sg_chain to set the chain pointer indication bit as is
done by the sg_chain function.

Signed-off-by: Tom Lendacky 
Signed-off-by: Herbert Xu 
Signed-off-by: Ben Hutchings

tracing: Allow events to have NULL strings

2014-01-03T04:33:26+00:00

commit 4e58e54754dc1fec21c3a9e824bc108b05fdf46e upstream.

If an TRACE_EVENT() uses __assign_str() or __get_str on a NULL pointer
then the following oops will happen:

BUG: unable to handle kernel NULL pointer dereference at   (null)
IP: [] strlen+0x10/0x1a
*pde = 00000000 ^M
Oops: 0000 [#1] PREEMPT SMP
Modules linked in:
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.13.0-rc1-test+ #2
Hardware name:                  /DG965MQ, BIOS MQ96510J.86A.0372.2006.0605.1717 06/05/2006^M
task: f5cde9f0 ti: f5e5e000 task.ti: f5e5e000
EIP: 0060:[] EFLAGS: 00210046 CPU: 1
EIP is at strlen+0x10/0x1a
EAX: 00000000 EBX: c2472da8 ECX: ffffffff EDX: c2472da8
ESI: c1c5e5fc EDI: 00000000 EBP: f5e5fe84 ESP: f5e5fe80
 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
CR0: 8005003b CR2: 00000000 CR3: 01f32000 CR4: 000007d0
Stack:
 f5f18b90 f5e5feb8 c10687a8 0759004f 00000005 00000005 00000005 00200046
 00000002 00000000 c1082a93 f56c7e28 c2472da8 c1082a93 f5e5fee4 c106bc61^M
 00000000 c1082a93 00000000 00000000 00000001 00200046 00200082 00000000
Call Trace:
 [] ftrace_raw_event_lock+0x39/0xc0
 [] ? ktime_get+0x29/0x69
 [] ? ktime_get+0x29/0x69
 [] lock_release+0x57/0x1a5
 [] ? ktime_get+0x29/0x69
 [] read_seqcount_begin.constprop.7+0x4d/0x75
 [] ? ktime_get+0x29/0x69^M
 [] ktime_get+0x29/0x69
 [] __tick_nohz_idle_enter+0x1e/0x426
 [] ? lock_release_holdtime.part.19+0x48/0x4d
 [] ? time_hardirqs_off+0xe/0x28
 [] ? trace_hardirqs_off_caller+0x3f/0xaf
 [] tick_nohz_idle_enter+0x59/0x62
 [] cpu_startup_entry+0x64/0x192
 [] start_secondary+0x277/0x27c
Code: 90 89 c6 89 d0 88 c4 ac 38 e0 74 09 84 c0 75 f7 be 01 00 00 00 89 f0 48 5e 5d c3 55 89 e5 57 66 66 66 66 90 83 c9 ff 89 c7 31 c0  ae f7 d1 8d 41 ff 5f 5d c3 55 89 e5 57 66 66 66 66 90 31 ff
EIP: [] strlen+0x10/0x1a SS:ESP 0068:f5e5fe80
CR2: 0000000000000000
---[ end trace 01bc47bf519ec1b2 ]---

New tracepoints have been added that have allowed for NULL pointers
being assigned to strings. To fix this, change the TRACE_EVENT() code
to check for NULL and if it is, it will assign "(null)" to it instead
(similar to what glibc printf does).

Reported-by: Shuah Khan 
Reported-by: Jovi Zhangwei 
Link: http://lkml.kernel.org/r/CAGdX0WFeEuy+DtpsJzyzn0343qEEjLX97+o1VREFkUEhndC+5Q@mail.gmail.com
Link: http://lkml.kernel.org/r/528D6972.9010702@samsung.com
Fixes: 9cbf117662e2 ("tracing/events: provide string with undefined size support")
Signed-off-by: Steven Rostedt 
Signed-off-by: Ben Hutchings

PCI: Define macro for Marvell vendor ID

2014-01-03T04:33:24+00:00

commit 8e7ee6f5dfb56a32da760d990be908ed35b1c5bf upstream.

Define PCI_VENDOR_ID_MARVELL_EXT macro for 0x1b4b vendor ID

Signed-off-by: Xiangliang Yu 
Signed-off-by: Myron Stowe 
Signed-off-by: Bjorn Helgaas 
Signed-off-by: Ben Hutchings

ipc, msg: fix message length check for negative values

2014-01-03T04:33:21+00:00

commit 4e9b45a19241354daec281d7a785739829b52359 upstream.

On 64 bit systems the test for negative message sizes is bogus as the
size, which may be positive when evaluated as a long, will get truncated
to an int when passed to load_msg().  So a long might very well contain a
positive value but when truncated to an int it would become negative.

That in combination with a small negative value of msg_ctlmax (which will
be promoted to an unsigned type for the comparison against msgsz, making
it a big positive value and therefore make it pass the check) will lead to
two problems: 1/ The kmalloc() call in alloc_msg() will allocate a too
small buffer as the addition of alen is effectively a subtraction.  2/ The
copy_from_user() call in load_msg() will first overflow the buffer with
userland data and then, when the userland access generates an access
violation, the fixup handler copy_user_handle_tail() will try to fill the
remainder with zeros -- roughly 4GB.  That almost instantly results in a
system crash or reset.

  ,-[ Reproducer (needs to be run as root) ]--
  | #include 
  | #include 
  | #include 
  | #include 
  |
  | int main(void) {
  |     long msg = 1;
  |     int fd;
  |
  |     fd = open("/proc/sys/kernel/msgmax", O_WRONLY);
  |     write(fd, "-1", 2);
  |     close(fd);
  |
  |     msgsnd(0, &msg, 0xfffffff0, IPC_NOWAIT);
  |
  |     return 0;
  | }
  '---

Fix the issue by preventing msgsz from getting truncated by consistently
using size_t for the message length.  This way the size checks in
do_msgsnd() could still be passed with a negative value for msg_ctlmax but
we would fail on the buffer allocation in that case and error out.

Also change the type of m_ts from int to size_t to avoid similar nastiness
in other code paths -- it is used in similar constructs, i.e.  signed vs.
unsigned checks.  It should never become negative under normal
circumstances, though.

Setting msg_ctlmax to a negative value is an odd configuration and should
be prevented.  As that might break existing userland, it will be handled
in a separate commit so it could easily be reverted and reworked without
reintroducing the above described bug.

Hardening mechanisms for user copy operations would have catched that bug
early -- e.g.  checking slab object sizes on user copy operations as the
usercopy feature of the PaX patch does.  Or, for that matter, detect the
long vs.  int sign change due to truncation, as the size overflow plugin
of the very same patch does.

[akpm@linux-foundation.org: fix i386 min() warnings]
Signed-off-by: Mathias Krause 
Cc: Pax Team 
Cc: Davidlohr Bueso 
Cc: Brad Spengler 
Cc: Manfred Spraul 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
[bwh: Backported to 3.2:
 - Adjust context
 - Drop changes to alloc_msg() and copy_msg(), which don't exist]
Signed-off-by: Ben Hutchings