linux-stable.git/include, branch v3.2.20

kbuild: install kernel-page-flags.h

2012-06-10T13:42:10+00:00

commit 9295b7a07c859a42346221b5839be0ae612333b0 upstream.

Programs using /proc/kpageflags need to know about the various flags.  The
 provides them and the comments in the file
indicate that it is supposed to be used by user-level code.  But the file
is not installed.

Install the headers and mark the unstable flags as out-of-bounds.  The
page-type tool is also adjusted to not duplicate the definitions

Signed-off-by: Ulrich Drepper 
Acked-by: KOSAKI Motohiro 
Acked-by: Fengguang Wu 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
[bwh: Backported to 3.2: adjust context; drop change to missing tools/vm/]
Signed-off-by: Ben Hutchings

drm/radeon/kms: add new BTC PCI ids

2012-06-10T13:42:09+00:00

commit a2bef8ce826dd1e787fd8ad9b6e0566ba59dab43 upstream.

Signed-off-by: Alex Deucher 
Signed-off-by: Dave Airlie 
Signed-off-by: Ben Hutchings

drm/radeon/kms: add new Palm, Sumo PCI ids

2012-06-10T13:42:09+00:00

commit 4a6991cc1fad514745b79181df3ace72d561e7aa upstream.

Signed-off-by: Alex Deucher 
Signed-off-by: Dave Airlie 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

skb: avoid unnecessary reallocations in __skb_cow

2012-06-10T13:42:06+00:00

[ Upstream commit 617c8c11236716dcbda877e764b7bf37c6fd8063 ]

At the beginning of __skb_cow, headroom gets set to a minimum of
NET_SKB_PAD. This causes unnecessary reallocations if the buffer was not
cloned and the headroom is just below NET_SKB_PAD, but still more than the
amount requested by the caller.
This was showing up frequently in my tests on VLAN tx, where
vlan_insert_tag calls skb_cow_head(skb, VLAN_HLEN).

Locally generated packets should have enough headroom, and for forward
paths, we already have NET_SKB_PAD bytes of headroom, so we don't need to
add any extra space here.

Signed-off-by: Felix Fietkau 
Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

sctp: check cached dst before using it

2012-06-10T13:42:06+00:00

[ Upstream commit e0268868ba064980488fc8c194db3d8e9fb2959c ]

dst_check() will take care of SA (and obsolete field), hence
IPsec rekeying scenario is taken into account.

Signed-off-by: Nicolas Dichtel 
Acked-by: Vlad Yaseivch 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

Revert "net: maintain namespace isolation between vlan and real device"

2012-06-10T13:42:05+00:00

[ Upstream commit 59b9997baba5242997ddc7bd96b1391f5275a5a4 ]

This reverts commit 8a83a00b0735190384a348156837918271034144.

It causes regressions for S390 devices, because it does an
unconditional DST drop on SKBs for vlans and the QETH device
needs the neighbour entry hung off the DST for certain things
on transmit.

Arnd can't remember exactly why he even needed this change.

Conflicts:

	drivers/net/macvlan.c
	net/8021q/vlan_dev.c
	net/core/dev.c

Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

ipv6: fix incorrect ipsec fragment

2012-06-10T13:42:03+00:00

[ Upstream commit 0c1833797a5a6ec23ea9261d979aa18078720b74 ]

Since commit ad0081e43a
"ipv6: Fragment locally generated tunnel-mode IPSec6 packets as needed"
the fragment of packets is incorrect.
because tunnel mode needs IPsec headers and trailer for all fragments,
while on transport mode it is sufficient to add the headers to the
first fragment and the trailer to the last.

so modify mtu and maxfraglen base on ipsec mode and if fragment is first
or last.

with my test,it work well(every fragment's size is the mtu)
and does not trigger slow fragment path.

Changes from v1:
	though optimization, mtu_prev and maxfraglen_prev can be delete.
	replace xfrm mode codes with dst_entry's new frag DST_XFRM_TUNNEL.
	add fuction ip6_append_data_mtu to make codes clearer.

Signed-off-by: Gao feng 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

set fake_rtable's dst to NULL to avoid kernel Oops

2012-06-10T13:42:03+00:00

[ Upstream commit a881e963c7fe1f226e991ee9bbe8907acda93294 ]

bridge: set fake_rtable's dst to NULL to avoid kernel Oops

when bridge is deleted before tap/vif device's delete, kernel may
encounter an oops because of NULL reference to fake_rtable's dst.
Set fake_rtable's dst to NULL before sending packets out can solve
this problem.

v4 reformat, change br_drop_fake_rtable(skb) to {}

v3 enrich commit header

v2 introducing new flag DST_FAKE_RTABLE to dst_entry struct.

[ Use "do { } while (0)" for nop br_drop_fake_rtable()
  implementation -DaveM ]

Acked-by: Eric Dumazet 
Signed-off-by: Peter Huang 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

block: don't mark buffers beyond end of disk as mapped

2012-05-30T23:44:04+00:00

commit 080399aaaf3531f5b8761ec0ac30ff98891e8686 upstream.

Hi,

We have a bug report open where a squashfs image mounted on ppc64 would
exhibit errors due to trying to read beyond the end of the disk.  It can
easily be reproduced by doing the following:

[root@ibm-p750e-02-lp3 ~]# ls -l install.img
-rw-r--r-- 1 root root 142032896 Apr 30 16:46 install.img
[root@ibm-p750e-02-lp3 ~]# mount -o loop ./install.img /mnt/test
[root@ibm-p750e-02-lp3 ~]# dd if=/dev/loop0 of=/dev/null
dd: reading `/dev/loop0': Input/output error
277376+0 records in
277376+0 records out
142016512 bytes (142 MB) copied, 0.9465 s, 150 MB/s

In dmesg, you'll find the following:

squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   43.106012] attempt to access beyond end of device
[   43.106029] loop0: rw=0, want=277410, limit=277408
[   43.106039] Buffer I/O error on device loop0, logical block 138704
[   43.106053] attempt to access beyond end of device
[   43.106057] loop0: rw=0, want=277412, limit=277408
[   43.106061] Buffer I/O error on device loop0, logical block 138705
[   43.106066] attempt to access beyond end of device
[   43.106070] loop0: rw=0, want=277414, limit=277408
[   43.106073] Buffer I/O error on device loop0, logical block 138706
[   43.106078] attempt to access beyond end of device
[   43.106081] loop0: rw=0, want=277416, limit=277408
[   43.106085] Buffer I/O error on device loop0, logical block 138707
[   43.106089] attempt to access beyond end of device
[   43.106093] loop0: rw=0, want=277418, limit=277408
[   43.106096] Buffer I/O error on device loop0, logical block 138708
[   43.106101] attempt to access beyond end of device
[   43.106104] loop0: rw=0, want=277420, limit=277408
[   43.106108] Buffer I/O error on device loop0, logical block 138709
[   43.106112] attempt to access beyond end of device
[   43.106116] loop0: rw=0, want=277422, limit=277408
[   43.106120] Buffer I/O error on device loop0, logical block 138710
[   43.106124] attempt to access beyond end of device
[   43.106128] loop0: rw=0, want=277424, limit=277408
[   43.106131] Buffer I/O error on device loop0, logical block 138711
[   43.106135] attempt to access beyond end of device
[   43.106139] loop0: rw=0, want=277426, limit=277408
[   43.106143] Buffer I/O error on device loop0, logical block 138712
[   43.106147] attempt to access beyond end of device
[   43.106151] loop0: rw=0, want=277428, limit=277408
[   43.106154] Buffer I/O error on device loop0, logical block 138713
[   43.106158] attempt to access beyond end of device
[   43.106162] loop0: rw=0, want=277430, limit=277408
[   43.106166] attempt to access beyond end of device
[   43.106169] loop0: rw=0, want=277432, limit=277408
...
[   43.106307] attempt to access beyond end of device
[   43.106311] loop0: rw=0, want=277470, limit=2774

Squashfs manages to read in the end block(s) of the disk during the
mount operation.  Then, when dd reads the block device, it leads to
block_read_full_page being called with buffers that are beyond end of
disk, but are marked as mapped.  Thus, it would end up submitting read
I/O against them, resulting in the errors mentioned above.  I fixed the
problem by modifying init_page_buffers to only set the buffer mapped if
it fell inside of i_size.

Cheers,
Jeff

Signed-off-by: Jeff Moyer 
Acked-by: Nick Piggin 

--

Changes from v1->v2: re-used max_block, as suggested by Nick Piggin.
Signed-off-by: Jens Axboe 
Signed-off-by: Ben Hutchings

xen: do not map the same GSI twice in PVHVM guests.

2012-05-30T23:44:01+00:00

commit 68c2c39a76b094e9b2773e5846424ea674bf2c46 upstream.

PV on HVM guests map GSIs into event channels. At restore time the
event channels are resumed by restore_pirqs.

Device drivers might try to register the same GSI again through ACPI at
restore time, but the GSI has already been mapped and bound by
restore_pirqs. This patch detects these situations and avoids
 mapping the same GSI multiple times.

Without this patch we get:
(XEN) irq.c:2235: dom4: pirq 23 or emuirq 28 already mapped
and waste a pirq.

Signed-off-by: Stefano Stabellini 
Signed-off-by: Konrad Rzeszutek Wilk 
Signed-off-by: Ben Hutchings