linux-stable.git/include, branch v3.18.95

crypto: hash - introduce crypto_hash_alg_has_setkey()

2018-02-16T19:14:45+00:00

commit cd6ed77ad5d223dc6299fb58f62e0f5267f7e2ba upstream.

Templates that use an shash spawn can use crypto_shash_alg_has_setkey()
to determine whether the underlying algorithm requires a key or not.
But there was no corresponding function for ahash spawns.  Add it.

Note that the new function actually has to support both shash and ahash
algorithms, since the ahash API can be used with either.

Signed-off-by: Eric Biggers 
Signed-off-by: Herbert Xu 
Signed-off-by: Greg Kroah-Hartman

ipv4: Map neigh lookup keys in __ipv4_neigh_lookup_noref()

2018-02-16T19:14:42+00:00

Commit 6c16fa957e84 is an incorrect backport as we map the keys in
struct __ipv4_neigh_lookup(), but the correct place to add the
code is struct __ipv4_neigh_lookup_noref(), compared to upstream.

Fix it by moving the code, or fewer cases will be covered as
__ipv4_neigh_lookup_noref() will be called unconditionally from
__ipv4_neigh_lookup(), and it can be called from other places
such as ip_output.c.

Fixes: 6c16fa957e84 (ipv4: Make neigh lookup keys for loopback/point-to-point devices be INADDR_ANY)
Signed-off-by: Wang Han 
Signed-off-by: Greg Kroah-Hartman

ipv4: Make neigh lookup keys for loopback/point-to-point devices be INADDR_ANY

2018-01-31T13:46:15+00:00

[ Upstream commit cd9ff4de0107c65d69d02253bb25d6db93c3dbc1 ]

Map all lookup neigh keys to INADDR_ANY for loopback/point-to-point devices
to avoid making an entry for every remote ip the device needs to talk to.

This used the be the old behavior but became broken in a263b3093641f
(ipv4: Make neigh lookups directly in output packet path) and later removed
in 0bb4087cbec0 (ipv4: Fix neigh lookup keying over loopback/point-to-point
devices) because it was broken.

Signed-off-by: Jim Westfall 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tcp: __tcp_hdrlen() helper

2018-01-31T13:46:15+00:00

commit d9b3fca27385eafe61c3ca6feab6cb1e7dc77482 upstream.

tcp_hdrlen is wasteful if you already have a pointer to struct tcphdr.
This splits the size calculation into a helper function that can be
used if a struct tcphdr is already available.

Signed-off-by: Craig Gallek 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: tcp: close sock if net namespace is exiting

2018-01-31T13:46:14+00:00

[ Upstream commit 4ee806d51176ba7b8ff1efd81f271d7252e03a1d ]

When a tcp socket is closed, if it detects that its net namespace is
exiting, close immediately and do not wait for FIN sequence.

For normal sockets, a reference is taken to their net namespace, so it will
never exit while the socket is open.  However, kernel sockets do not take a
reference to their net namespace, so it may begin exiting while the kernel
socket is still open.  In this case if the kernel socket is a tcp socket,
it will stay open trying to complete its close sequence.  The sock's dst(s)
hold a reference to their interface, which are all transferred to the
namespace's loopback interface when the real interfaces are taken down.
When the namespace tries to take down its loopback interface, it hangs
waiting for all references to the loopback interface to release, which
results in messages like:

unregister_netdevice: waiting for lo to become free. Usage count = 1

These messages continue until the socket finally times out and closes.
Since the net namespace cleanup holds the net_mutex while calling its
registered pernet callbacks, any new net namespace initialization is
blocked until the current net namespace finishes exiting.

After this change, the tcp socket notices the exiting net namespace, and
closes immediately, releasing its dst(s) and their reference to the
loopback interface, which lets the net namespace continue exiting.

Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1711407
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=97811
Signed-off-by: Dan Streetman 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

eventpoll.h: add missing epoll event masks

2018-01-31T13:46:14+00:00

commit 7e040726850a106587485c21bdacc0bfc8a0cbed upstream.

[resend due to me forgetting to cc: linux-api the first time around I
posted these back on Feb 23]

From: Greg Kroah-Hartman 

For some reason these values are not in the uapi header file, so any
libc has to define it themselves.  To prevent them from needing to do
this, just have the kernel provide the correct values.

Reported-by: Elliott Hughes 
Signed-off-by: Greg Hackmann 
Signed-off-by: Greg Kroah-Hartman

scsi: sg: disable SET_FORCE_LOW_DMA

2018-01-31T13:46:11+00:00

commit 745dfa0d8ec26b24f3304459ff6e9eacc5c8351b upstream.

The ioctl SET_FORCE_LOW_DMA has never worked since the initial git
check-in, and the respective setting is nowadays handled correctly. So
disable it entirely.

Signed-off-by: Hannes Reinecke 
Reviewed-by: Johannes Thumshirn 
Tested-by: Johannes Thumshirn 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

target: Avoid early CMD_T_PRE_EXECUTE failures during ABORT_TASK

2018-01-17T08:29:31+00:00

commit 1c21a48055a67ceb693e9c2587824a8de60a217c upstream.

This patch fixes bug where early se_cmd exceptions that occur
before backend execution can result in use-after-free if/when
a subsequent ABORT_TASK occurs for the same tag.

Since an early se_cmd exception will have had se_cmd added to
se_session->sess_cmd_list via target_get_sess_cmd(), it will
not have CMD_T_COMPLETE set by the usual target_complete_cmd()
backend completion path.

This causes a subsequent ABORT_TASK + __target_check_io_state()
to signal ABORT_TASK should proceed.  As core_tmr_abort_task()
executes, it will bring the outstanding se_cmd->cmd_kref count
down to zero releasing se_cmd, after se_cmd has already been
queued with error status into fabric driver response path code.

To address this bug, introduce a CMD_T_PRE_EXECUTE bit that is
set at target_get_sess_cmd() time, and cleared immediately before
backend driver dispatch in target_execute_cmd() once CMD_T_ACTIVE
is set.

Then, check CMD_T_PRE_EXECUTE within __target_check_io_state() to
determine when an early exception has occured, and avoid aborting
this se_cmd since it will have already been queued into fabric
driver response path code.

Reported-by: Donald White 
Cc: Donald White 
Cc: Mike Christie 
Cc: Hannes Reinecke 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

net: stmmac: enable EEE in MII, GMII or RGMII only

2018-01-17T08:29:30+00:00

[ Upstream commit 879626e3a52630316d817cbda7cec9a5446d1d82 ]

Note in the databook - Section 4.4 - EEE :
" The EEE feature is not supported when the MAC is configured to use the
TBI, RTBI, SMII, RMII or SGMII single PHY interface. Even if the MAC
supports multiple PHY interfaces, you should activate the EEE mode only
when the MAC is operating with GMII, MII, or RGMII interface."

Applying this restriction solves a stability issue observed on Amlogic
gxl platforms operating with RMII interface and the internal PHY.

Fixes: 83bf79b6bb64 ("stmmac: disable at run-time the EEE if not supported")
Signed-off-by: Jerome Brunet 
Tested-by: Arnaud Patard 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

sh_eth: fix SH7757 GEther initialization

2018-01-17T08:29:30+00:00

[ Upstream commit 5133550296d43236439494aa955bfb765a89f615 ]

Renesas  SH7757 has 2 Fast and 2 Gigabit Ether controllers, while the
'sh_eth' driver can only reset and initialize TSU of the first controller
pair. Shimoda-san tried to solve that adding the 'needs_init' member to the
'struct sh_eth_plat_data', however the platform code still never sets this
flag. I think  that we can infer this information from the 'devno' variable
(set  to 'platform_device::id') and reset/init the Ether controller pair
only for an even 'devno'; therefore 'sh_eth_plat_data::needs_init' can be
removed...

Fixes: 150647fb2c31 ("net: sh_eth: change the condition of initialization")
Signed-off-by: Sergei Shtylyov 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman