linux-stable.git/include, branch v3.16.48

ptrace: use fsuid, fsgid, effective creds for fs access checks

2017-09-15T17:30:17+00:00

commit caaee6234d05a58c5b4d05e7bf766131b810a657 upstream.

By checking the effective credentials instead of the real UID / permitted
capabilities, ensure that the calling process actually intended to use its
credentials.

To ensure that all ptrace checks use the correct caller credentials (e.g.
in case out-of-tree code or newly added code omits the PTRACE_MODE_*CREDS
flag), use two new flags and require one of them to be set.

The problem was that when a privileged task had temporarily dropped its
privileges, e.g.  by calling setreuid(0, user_uid), with the intent to
perform following syscalls with the credentials of a user, it still passed
ptrace access checks that the user would not be able to pass.

While an attacker should not be able to convince the privileged task to
perform a ptrace() syscall, this is a problem because the ptrace access
check is reused for things in procfs.

In particular, the following somewhat interesting procfs entries only rely
on ptrace access checks:

 /proc/$pid/stat - uses the check for determining whether pointers
     should be visible, useful for bypassing ASLR
 /proc/$pid/maps - also useful for bypassing ASLR
 /proc/$pid/cwd - useful for gaining access to restricted
     directories that contain files with lax permissions, e.g. in
     this scenario:
     lrwxrwxrwx root root /proc/13020/cwd -> /root/foobar
     drwx------ root root /root
     drwxr-xr-x root root /root/foobar
     -rw-r--r-- root root /root/foobar/secret

Therefore, on a system where a root-owned mode 6755 binary changes its
effective credentials as described and then dumps a user-specified file,
this could be used by an attacker to reveal the memory layout of root's
processes or reveal the contents of files he is not allowed to access
(through /proc/$pid/cwd).

[akpm@linux-foundation.org: fix warning]
Signed-off-by: Jann Horn 
Acked-by: Kees Cook 
Cc: Casey Schaufler 
Cc: Oleg Nesterov 
Cc: Ingo Molnar 
Cc: James Morris 
Cc: "Serge E. Hallyn" 
Cc: Andy Shevchenko 
Cc: Andy Lutomirski 
Cc: Al Viro 
Cc: "Eric W. Biederman" 
Cc: Willy Tarreau 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
[bwh: Backported to 3.16:
 - Update mm_access() calls in fs/proc/task_{,no}mmu.c too
 - Adjust context]
Signed-off-by: Ben Hutchings

ipv6: reorder ip6_route_dev_notifier after ipv6_dev_notf

2017-09-15T17:30:14+00:00

commit 242d3a49a2a1a71d8eb9f953db1bcaa9d698ce00 upstream.

For each netns (except init_net), we initialize its null entry
in 3 places:

1) The template itself, as we use kmemdup()
2) Code around dst_init_metrics() in ip6_route_net_init()
3) ip6_route_dev_notify(), which is supposed to initialize it after
   loopback registers

Unfortunately the last one still happens in a wrong order because
we expect to initialize net->ipv6.ip6_null_entry->rt6i_idev to
net->loopback_dev's idev, thus we have to do that after we add
idev to loopback. However, this notifier has priority == 0 same as
ipv6_dev_notf, and ipv6_dev_notf is registered after
ip6_route_dev_notifier so it is called actually after
ip6_route_dev_notifier. This is similar to commit 2f460933f58e
("ipv6: initialize route null entry in addrconf_init()") which
fixes init_net.

Fix it by picking a smaller priority for ip6_route_dev_notifier.
Also, we have to release the refcnt accordingly when unregistering
loopback_dev because device exit functions are called before subsys
exit functions.

Acked-by: David Ahern 
Tested-by: David Ahern 
Signed-off-by: Cong Wang 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

ipv6: initialize route null entry in addrconf_init()

2017-09-15T17:30:14+00:00

commit 2f460933f58eee3393aba64f0f6d14acb08d1724 upstream.

Andrey reported a crash on init_net.ipv6.ip6_null_entry->rt6i_idev
since it is always NULL.

This is clearly wrong, we have code to initialize it to loopback_dev,
unfortunately the order is still not correct.

loopback_dev is registered very early during boot, we lose a chance
to re-initialize it in notifier. addrconf_init() is called after
ip6_route_init(), which means we have no chance to correct it.

Fix it by moving this initialization explicitly after
ipv6_add_dev(init_net.loopback_dev) in addrconf_init().

Reported-by: Andrey Konovalov 
Signed-off-by: Cong Wang 
Tested-by: Andrey Konovalov 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

srcu: Allow use of Classic SRCU from both process and interrupt context

2017-09-15T17:30:07+00:00

commit 1123a6041654e8f889014659593bad4168e542c2 upstream.

Linu Cherian reported a WARN in cleanup_srcu_struct() when shutting
down a guest running iperf on a VFIO assigned device.  This happens
because irqfd_wakeup() calls srcu_read_lock(&kvm->irq_srcu) in interrupt
context, while a worker thread does the same inside kvm_set_irq().  If the
interrupt happens while the worker thread is executing __srcu_read_lock(),
updates to the Classic SRCU ->lock_count[] field or the Tree SRCU
->srcu_lock_count[] field can be lost.

The docs say you are not supposed to call srcu_read_lock() and
srcu_read_unlock() from irq context, but KVM interrupt injection happens
from (host) interrupt context and it would be nice if SRCU supported the
use case.  KVM is using SRCU here not really for the "sleepable" part,
but rather due to its IPI-free fast detection of grace periods.  It is
therefore not desirable to switch back to RCU, which would effectively
revert commit 719d93cd5f5c ("kvm/irqchip: Speed up KVM_SET_GSI_ROUTING",
2014-01-16).

However, the docs are overly conservative.  You can have an SRCU instance
only has users in irq context, and you can mix process and irq context
as long as process context users disable interrupts.  In addition,
__srcu_read_unlock() actually uses this_cpu_dec() on both Tree SRCU and
Classic SRCU.  For those two implementations, only srcu_read_lock()
is unsafe.

When Classic SRCU's __srcu_read_unlock() was changed to use this_cpu_dec(),
in commit 5a41344a3d83 ("srcu: Simplify __srcu_read_unlock() via
this_cpu_dec()", 2012-11-29), __srcu_read_lock() did two increments.
Therefore it kept __this_cpu_inc(), with preempt_disable/enable in
the caller.  Tree SRCU however only does one increment, so on most
architectures it is more efficient for __srcu_read_lock() to use
this_cpu_inc(), and any performance differences appear to be down in
the noise.

Fixes: 719d93cd5f5c ("kvm/irqchip: Speed up KVM_SET_GSI_ROUTING")
Reported-by: Linu Cherian 
Suggested-by: Linu Cherian 
Cc: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini 
Cc: Linus Torvalds 
Signed-off-by: Paul E. McKenney 
[bwh: Backported to 3.16: __srcu_read_lock() still updates two different
 counters.  So follow what  _this_cpu_generic_to_op() does and use
 raw_local_irq_{save,restore}() and raw_cpu_ptr().]
Signed-off-by: Ben Hutchings

rcu: Move preemption disabling out of __srcu_read_lock()

2017-09-15T17:30:07+00:00

commit 49f5903b473c5f63f3b57856d1bd4593db0a2eef upstream.

Currently, __srcu_read_lock() cannot be invoked from restricted
environments because it contains calls to preempt_disable() and
preempt_enable(), both of which can invoke lockdep, which is a bad
idea in some restricted execution modes.  This commit therefore moves
the preempt_disable() and preempt_enable() from __srcu_read_lock()
to srcu_read_lock().  It also inserts the preempt_disable() and
preempt_enable() around the call to __srcu_read_lock() in do_exit().

Signed-off-by: Paul E. McKenney 
Reviewed-by: Josh Triplett 
[bwh: Backported to 3.16:
 - Drop changes in do_exit()
 - Adjust context]
Signed-off-by: Ben Hutchings

net: ping: do not abuse udp_poll()

2017-09-15T17:29:56+00:00

commit 77d4b1d36926a9b8387c6b53eeba42bcaaffcea3 upstream.

Alexander reported various KASAN messages triggered in recent kernels

The problem is that ping sockets should not use udp_poll() in the first
place, and recent changes in UDP stack finally exposed this old bug.

Fixes: c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind")
Fixes: 6d0bfe226116 ("net: ipv6: Add IPv6 support to the ping socket.")
Signed-off-by: Eric Dumazet 
Reported-by: Sasha Levin 
Cc: Solar Designer 
Cc: Vasiliy Kulikov 
Cc: Lorenzo Colitti 
Acked-By: Lorenzo Colitti 
Tested-By: Lorenzo Colitti 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

tracing/kprobes: Enforce kprobes teardown after testing

2017-09-15T17:29:43+00:00

commit 30e7d894c1478c88d50ce94ddcdbd7f9763d9cdd upstream.

Enabling the tracer selftest triggers occasionally the warning in
text_poke(), which warns when the to be modified page is not marked
reserved.

The reason is that the tracer selftest installs kprobes on functions marked
__init for testing. These probes are removed after the tests, but that
removal schedules the delayed kprobes_optimizer work, which will do the
actual text poke. If the work is executed after the init text is freed,
then the warning triggers. The bug can be reproduced reliably when the work
delay is increased.

Flush the optimizer work and wait for the optimizing/unoptimizing lists to
become empty before returning from the kprobes tracer selftest. That
ensures that all operations which were queued due to the probes removal
have completed.

Link: http://lkml.kernel.org/r/20170516094802.76a468bb@gandalf.local.home

Signed-off-by: Thomas Gleixner 
Acked-by: Masami Hiramatsu 
Fixes: 6274de498 ("kprobes: Support delayed unoptimizing")
Signed-off-by: Steven Rostedt (VMware) 
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings

USB: hub: fix SS max number of ports

2017-09-15T17:29:42+00:00

commit 93491ced3c87c94b12220dbac0527e1356702179 upstream.

Add define for the maximum number of ports on a SuperSpeed hub as per
USB 3.1 spec Table 10-5, and use it when verifying the retrieved hub
descriptor.

This specifically avoids benign attempts to update the DeviceRemovable
mask for non-existing ports (should we get that far).

Fixes: dbe79bbe9dcb ("USB 3.0 Hub Changes")
Acked-by: Alan Stern 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

xfrm: fix stack access out of bounds with CONFIG_XFRM_SUB_POLICY

2017-09-15T17:29:33+00:00

commit 9b3eb54106cf6acd03f07cf0ab01c13676a226c2 upstream.

When CONFIG_XFRM_SUB_POLICY=y, xfrm_dst stores a copy of the flowi for
that dst. Unfortunately, the code that allocates and fills this copy
doesn't care about what type of flowi (flowi, flowi4, flowi6) gets
passed. In multiple code paths (from raw_sendmsg, from TCP when
replying to a FIN, in vxlan, geneve, and gre), the flowi that gets
passed to xfrm is actually an on-stack flowi4, so we end up reading
stuff from the stack past the end of the flowi4 struct.

Since xfrm_dst->origin isn't used anywhere following commit
ca116922afa8 ("xfrm: Eliminate "fl" and "pol" args to
xfrm_bundle_ok()."), just get rid of it.  xfrm_dst->partner isn't used
either, so get rid of that too.

Fixes: 9d6ec938019c ("ipv4: Use flowi4 in public route lookup interfaces.")
Signed-off-by: Sabrina Dubroca 
Signed-off-by: Steffen Klassert 
Signed-off-by: Ben Hutchings

net/mlx4: Fix the check in attaching steering rules

2017-08-26T01:14:50+00:00

commit 6dc06c08bef1c746ff8da33dab677cfbacdcad32 upstream.

Our previous patch (cited below) introduced a regression
for RAW Eth QPs.

Fix it by checking if the QP number provided by user-space
exists, hence allowing steering rules to be added for valid
QPs only.

Fixes: 89c557687a32 ("net/mlx4_en: Avoid adding steering rules with invalid ring")
Reported-by: Or Gerlitz 
Signed-off-by: Talat Batheesh 
Signed-off-by: Tariq Toukan 
Acked-by: Or Gerlitz 
Reviewed-by: Leon Romanovsky 
Signed-off-by: David S. Miller 
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings