linux-stable.git/include, branch v3.14.63

nfs: fix nfs_size_to_loff_t

2016-03-03T23:06:53+00:00

commit 50ab8ec74a153eb30db26529088bc57dd700b24c upstream.

See http: //www.infradead.org/rpr.html
X-Evolution-Source: 1451162204.2173.11@leira.trondhjem.org
Content-Transfer-Encoding: 8bit
Mime-Version: 1.0

We support OFFSET_MAX just fine, so don't round down below it.  Also
switch to using min_t to make the helper more readable.

Signed-off-by: Christoph Hellwig 
Fixes: 433c92379d9c ("NFS: Clean up nfs_size_to_loff_t()")
Signed-off-by: Trond Myklebust 
Signed-off-by: Greg Kroah-Hartman

cputime: Prevent 32bit overflow in time[val|spec]_to_cputime()

2016-03-03T23:06:52+00:00

commit 0f26922fe5dc5724b1adbbd54b21bad03590b4f3 upstream.

The datatype __kernel_time_t is u32 on 32bit platform, so its subject to
overflows in the timeval/timespec to cputime conversion.

Currently the following functions are affected:
1. setitimer()
2. timer_create/timer_settime()
3. sys_clock_nanosleep

This can happen on MIPS32 and ARM32 with "Full dynticks CPU time accounting"
enabled, which is required for CONFIG_NO_HZ_FULL.

Enforce u64 conversion to prevent the overflow.

Fixes: 31c1fc818715 ("ARM: Kconfig: allow full nohz CPU accounting")
Signed-off-by: zengtao 
Reviewed-by: Arnd Bergmann 
Cc: 
Link: http://lkml.kernel.org/r/1454384314-154784-1-git-send-email-prime.zeng@huawei.com
Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

ses: fix additional element traversal bug

2016-03-03T23:06:50+00:00

commit 5e1033561da1152c57b97ee84371dba2b3d64c25 upstream.

KASAN found that our additional element processing scripts drop off
the end of the VPD page into unallocated space.  The reason is that
not every element has additional information but our traversal
routines think they do, leading to them expecting far more additional
information than is present.  Fix this by adding a gate to the
traversal routine so that it only processes elements that are expected
to have additional information (list is in SES-2 section 6.1.13.1:
Additional Element Status diagnostic page overview)

Reported-by: Pavel Tikhomirov 
Tested-by: Pavel Tikhomirov 
Signed-off-by: James Bottomley 
Signed-off-by: Greg Kroah-Hartman

target: Fix race for SCF_COMPARE_AND_WRITE_POST checking

2016-03-03T23:06:49+00:00

commit 057085e522f8bf94c2e691a5b76880f68060f8ba upstream.

This patch addresses a race + use after free where the first
stage of COMPARE_AND_WRITE in compare_and_write_callback()
is rescheduled after the backend sends the secondary WRITE,
resulting in second stage compare_and_write_post() callback
completing in target_complete_ok_work() before the first
can return.

Because current code depends on checking se_cmd->se_cmd_flags
after return from se_cmd->transport_complete_callback(),
this results in first stage having SCF_COMPARE_AND_WRITE_POST
set, which incorrectly falls through into second stage CAW
processing code, eventually triggering a NULL pointer
dereference due to use after free.

To address this bug, pass in a new *post_ret parameter into
se_cmd->transport_complete_callback(), and depend upon this
value instead of ->se_cmd_flags to determine when to return
or fall through into ->queue_status() code for CAW.

Cc: Sagi Grimberg 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

lockd: create NSM handles per net namespace

2016-03-03T23:06:48+00:00

commit 0ad95472bf169a3501991f8f33f5147f792a8116 upstream.

Commit cb7323fffa85 ("lockd: create and use per-net NSM
 RPC clients on MON/UNMON requests") introduced per-net
NSM RPC clients. Unfortunately this doesn't make any sense
without per-net nsm_handle.

E.g. the following scenario could happen
Two hosts (X and Y) in different namespaces (A and B) share
the same nsm struct.

1. nsm_monitor(host_X) called => NSM rpc client created,
	nsm->sm_monitored bit set.
2. nsm_mointor(host-Y) called => nsm->sm_monitored already set,
	we just exit. Thus in namespace B ln->nsm_clnt == NULL.
3. host X destroyed => nsm->sm_count decremented to 1
4. host Y destroyed => nsm_unmonitor() => nsm_mon_unmon() => NULL-ptr
	dereference of *ln->nsm_clnt

So this could be fixed by making per-net nsm_handles list,
instead of global. Thus different net namespaces will not be able
share the same nsm_handle.

Signed-off-by: Andrey Ryabinin 
Signed-off-by: J. Bruce Fields 
Signed-off-by: Greg Kroah-Hartman

unix: correctly track in-flight fds in sending process user_struct

2016-03-03T23:06:47+00:00

commit 415e3d3e90ce9e18727e8843ae343eda5a58fad6 upstream.

The commit referenced in the Fixes tag incorrectly accounted the number
of in-flight fds over a unix domain socket to the original opener
of the file-descriptor. This allows another process to arbitrary
deplete the original file-openers resource limit for the maximum of
open files. Instead the sending processes and its struct cred should
be credited.

To do so, we add a reference counted struct user_struct pointer to the
scm_fp_list and use it to account for the number of inflight unix fds.

Fixes: 712f4aad406bb1 ("unix: properly account for FDs passed over unix sockets")
Reported-by: David Herrmann 
Cc: David Herrmann 
Cc: Willy Tarreau 
Cc: Linus Torvalds 
Suggested-by: Linus Torvalds 
Signed-off-by: Hannes Frederic Sowa 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tracepoints: Do not trace when cpu is offline

2016-03-03T23:06:44+00:00

commit f37755490fe9bf76f6ba1d8c6591745d3574a6a6 upstream.

The tracepoint infrastructure uses RCU sched protection to enable and
disable tracepoints safely. There are some instances where tracepoints are
used in infrastructure code (like kfree()) that get called after a CPU is
going offline, and perhaps when it is coming back online but hasn't been
registered yet.

This can probuce the following warning:

 [ INFO: suspicious RCU usage. ]
 4.4.0-00006-g0fe53e8-dirty #34 Tainted: G S
 -------------------------------
 include/trace/events/kmem.h:141 suspicious rcu_dereference_check() usage!

 other info that might help us debug this:

 RCU used illegally from offline CPU!  rcu_scheduler_active = 1, debug_locks = 1
 no locks held by swapper/8/0.

 stack backtrace:
  CPU: 8 PID: 0 Comm: swapper/8 Tainted: G S              4.4.0-00006-g0fe53e8-dirty #34
  Call Trace:
  [c0000005b76c78d0] [c0000000008b9540] .dump_stack+0x98/0xd4 (unreliable)
  [c0000005b76c7950] [c00000000010c898] .lockdep_rcu_suspicious+0x108/0x170
  [c0000005b76c79e0] [c00000000029adc0] .kfree+0x390/0x440
  [c0000005b76c7a80] [c000000000055f74] .destroy_context+0x44/0x100
  [c0000005b76c7b00] [c0000000000934a0] .__mmdrop+0x60/0x150
  [c0000005b76c7b90] [c0000000000e3ff0] .idle_task_exit+0x130/0x140
  [c0000005b76c7c20] [c000000000075804] .pseries_mach_cpu_die+0x64/0x310
  [c0000005b76c7cd0] [c000000000043e7c] .cpu_die+0x3c/0x60
  [c0000005b76c7d40] [c0000000000188d8] .arch_cpu_idle_dead+0x28/0x40
  [c0000005b76c7db0] [c000000000101e6c] .cpu_startup_entry+0x50c/0x560
  [c0000005b76c7ed0] [c000000000043bd8] .start_secondary+0x328/0x360
  [c0000005b76c7f90] [c000000000008a6c] start_secondary_prolog+0x10/0x14

This warning is not a false positive either. RCU is not protecting code that
is being executed while the CPU is offline.

Instead of playing "whack-a-mole(TM)" and adding conditional statements to
the tracepoints we find that are used in this instance, simply add a
cpu_online() test to the tracepoint code where the tracepoint will be
ignored if the CPU is offline.

Use of raw_smp_processor_id() is fine, as there should never be a case where
the tracepoint code goes from running on a CPU that is online and suddenly
gets migrated to a CPU that is offline.

Link: http://lkml.kernel.org/r/1455387773-4245-1-git-send-email-kda@linux-powerpc.org

Reported-by: Denis Kirjanov 
Fixes: 97e1c18e8d17b ("tracing: Kernel Tracepoints")
Signed-off-by: Steven Rostedt 
Signed-off-by: Greg Kroah-Hartman

radix-tree: fix oops after radix_tree_iter_retry

2016-02-25T19:58:55+00:00

commit 732042821cfa106b3c20b9780e4c60fee9d68900 upstream.

Helper radix_tree_iter_retry() resets next_index to the current index.
In following radix_tree_next_slot current chunk size becomes zero.  This
isn't checked and it tries to dereference null pointer in slot.

Tagged iterator is fine because retry happens only at slot 0 where tag
bitmask in iter->tags is filled with single bit.

Fixes: 46437f9a554f ("radix-tree: fix race in gang lookup")
Signed-off-by: Konstantin Khlebnikov 
Cc: Matthew Wilcox 
Cc: Hugh Dickins 
Cc: Ohad Ben-Cohen 
Cc: Jeremiah Mahler 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

radix-tree: fix race in gang lookup

2016-02-25T19:58:55+00:00

commit 46437f9a554fbe3e110580ca08ab703b59f2f95a upstream.

If the indirect_ptr bit is set on a slot, that indicates we need to redo
the lookup.  Introduce a new function radix_tree_iter_retry() which
forces the loop to retry the lookup by setting 'slot' to NULL and
turning the iterator back to point at the problematic entry.

This is a pretty rare problem to hit at the moment; the lookup has to
race with a grow of the radix tree from a height of 0.  The consequences
of hitting this race are that gang lookup could return a pointer to a
radix_tree_node instead of a pointer to whatever the user had inserted
in the tree.

Fixes: cebbd29e1c2f ("radix-tree: rewrite gang lookup using iterator")
Signed-off-by: Matthew Wilcox 
Cc: Hugh Dickins 
Cc: Ohad Ben-Cohen 
Cc: Konstantin Khlebnikov 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

tracing: Fix freak link error caused by branch tracer

2016-02-25T19:58:52+00:00

commit b33c8ff4431a343561e2319f17c14286f2aa52e2 upstream.

In my randconfig tests, I came across a bug that involves several
components:

* gcc-4.9 through at least 5.3
* CONFIG_GCOV_PROFILE_ALL enabling -fprofile-arcs for all files
* CONFIG_PROFILE_ALL_BRANCHES overriding every if()
* The optimized implementation of do_div() that tries to
  replace a library call with an division by multiplication
* code in drivers/media/dvb-frontends/zl10353.c doing

        u32 adc_clock = 450560; /* 45.056 MHz */
        if (state->config.adc_clock)
                adc_clock = state->config.adc_clock;
        do_div(value, adc_clock);

In this case, gcc fails to determine whether the divisor
in do_div() is __builtin_constant_p(). In particular, it
concludes that __builtin_constant_p(adc_clock) is false, while
__builtin_constant_p(!!adc_clock) is true.

That in turn throws off the logic in do_div() that also uses
__builtin_constant_p(), and instead of picking either the
constant- optimized division, and the code in ilog2() that uses
__builtin_constant_p() to figure out whether it knows the answer at
compile time. The result is a link error from failing to find
multiple symbols that should never have been called based on
the __builtin_constant_p():

dvb-frontends/zl10353.c:138: undefined reference to `____ilog2_NaN'
dvb-frontends/zl10353.c:138: undefined reference to `__aeabi_uldivmod'
ERROR: "____ilog2_NaN" [drivers/media/dvb-frontends/zl10353.ko] undefined!
ERROR: "__aeabi_uldivmod" [drivers/media/dvb-frontends/zl10353.ko] undefined!

This patch avoids the problem by changing __trace_if() to check
whether the condition is known at compile-time to be nonzero, rather
than checking whether it is actually a constant.

I see this one link error in roughly one out of 1600 randconfig builds
on ARM, and the patch fixes all known instances.

Link: http://lkml.kernel.org/r/1455312410-1058841-1-git-send-email-arnd@arndb.de

Acked-by: Nicolas Pitre 
Fixes: ab3c9c686e22 ("branch tracer, intel-iommu: fix build with CONFIG_BRANCH_TRACER=y")
Signed-off-by: Arnd Bergmann 
Signed-off-by: Steven Rostedt 
Signed-off-by: Greg Kroah-Hartman