linux-stable.git/include, branch v3.12.56

nfs: fix nfs_size_to_loff_t

2016-03-03T11:46:06+00:00

commit 50ab8ec74a153eb30db26529088bc57dd700b24c upstream.

See http: //www.infradead.org/rpr.html
X-Evolution-Source: 1451162204.2173.11@leira.trondhjem.org
Content-Transfer-Encoding: 8bit
Mime-Version: 1.0

We support OFFSET_MAX just fine, so don't round down below it.  Also
switch to using min_t to make the helper more readable.

Signed-off-by: Christoph Hellwig 
Fixes: 433c92379d9c ("NFS: Clean up nfs_size_to_loff_t()")
Signed-off-by: Trond Myklebust 
Signed-off-by: Jiri Slaby

ses: fix additional element traversal bug

2016-03-03T11:46:00+00:00

commit 5e1033561da1152c57b97ee84371dba2b3d64c25 upstream.

KASAN found that our additional element processing scripts drop off
the end of the VPD page into unallocated space.  The reason is that
not every element has additional information but our traversal
routines think they do, leading to them expecting far more additional
information than is present.  Fix this by adding a gate to the
traversal routine so that it only processes elements that are expected
to have additional information (list is in SES-2 section 6.1.13.1:
Additional Element Status diagnostic page overview)

Reported-by: Pavel Tikhomirov 
Tested-by: Pavel Tikhomirov 
Signed-off-by: James Bottomley 
Signed-off-by: Jiri Slaby

target: Fix race for SCF_COMPARE_AND_WRITE_POST checking

2016-03-03T11:45:57+00:00

commit 057085e522f8bf94c2e691a5b76880f68060f8ba upstream.

This patch addresses a race + use after free where the first
stage of COMPARE_AND_WRITE in compare_and_write_callback()
is rescheduled after the backend sends the secondary WRITE,
resulting in second stage compare_and_write_post() callback
completing in target_complete_ok_work() before the first
can return.

Because current code depends on checking se_cmd->se_cmd_flags
after return from se_cmd->transport_complete_callback(),
this results in first stage having SCF_COMPARE_AND_WRITE_POST
set, which incorrectly falls through into second stage CAW
processing code, eventually triggering a NULL pointer
dereference due to use after free.

To address this bug, pass in a new *post_ret parameter into
se_cmd->transport_complete_callback(), and depend upon this
value instead of ->se_cmd_flags to determine when to return
or fall through into ->queue_status() code for CAW.

Cc: Sagi Grimberg 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Jiri Slaby

lockd: create NSM handles per net namespace

2016-03-03T11:45:55+00:00

commit 0ad95472bf169a3501991f8f33f5147f792a8116 upstream.

Commit cb7323fffa85 ("lockd: create and use per-net NSM
 RPC clients on MON/UNMON requests") introduced per-net
NSM RPC clients. Unfortunately this doesn't make any sense
without per-net nsm_handle.

E.g. the following scenario could happen
Two hosts (X and Y) in different namespaces (A and B) share
the same nsm struct.

1. nsm_monitor(host_X) called => NSM rpc client created,
	nsm->sm_monitored bit set.
2. nsm_mointor(host-Y) called => nsm->sm_monitored already set,
	we just exit. Thus in namespace B ln->nsm_clnt == NULL.
3. host X destroyed => nsm->sm_count decremented to 1
4. host Y destroyed => nsm_unmonitor() => nsm_mon_unmon() => NULL-ptr
	dereference of *ln->nsm_clnt

So this could be fixed by making per-net nsm_handles list,
instead of global. Thus different net namespaces will not be able
share the same nsm_handle.

Signed-off-by: Andrey Ryabinin 
Signed-off-by: J. Bruce Fields 
Signed-off-by: Jiri Slaby

tracepoints: Do not trace when cpu is offline

2016-03-03T11:45:51+00:00

commit f37755490fe9bf76f6ba1d8c6591745d3574a6a6 upstream.

The tracepoint infrastructure uses RCU sched protection to enable and
disable tracepoints safely. There are some instances where tracepoints are
used in infrastructure code (like kfree()) that get called after a CPU is
going offline, and perhaps when it is coming back online but hasn't been
registered yet.

This can probuce the following warning:

 [ INFO: suspicious RCU usage. ]
 4.4.0-00006-g0fe53e8-dirty #34 Tainted: G S
 -------------------------------
 include/trace/events/kmem.h:141 suspicious rcu_dereference_check() usage!

 other info that might help us debug this:

 RCU used illegally from offline CPU!  rcu_scheduler_active = 1, debug_locks = 1
 no locks held by swapper/8/0.

 stack backtrace:
  CPU: 8 PID: 0 Comm: swapper/8 Tainted: G S              4.4.0-00006-g0fe53e8-dirty #34
  Call Trace:
  [c0000005b76c78d0] [c0000000008b9540] .dump_stack+0x98/0xd4 (unreliable)
  [c0000005b76c7950] [c00000000010c898] .lockdep_rcu_suspicious+0x108/0x170
  [c0000005b76c79e0] [c00000000029adc0] .kfree+0x390/0x440
  [c0000005b76c7a80] [c000000000055f74] .destroy_context+0x44/0x100
  [c0000005b76c7b00] [c0000000000934a0] .__mmdrop+0x60/0x150
  [c0000005b76c7b90] [c0000000000e3ff0] .idle_task_exit+0x130/0x140
  [c0000005b76c7c20] [c000000000075804] .pseries_mach_cpu_die+0x64/0x310
  [c0000005b76c7cd0] [c000000000043e7c] .cpu_die+0x3c/0x60
  [c0000005b76c7d40] [c0000000000188d8] .arch_cpu_idle_dead+0x28/0x40
  [c0000005b76c7db0] [c000000000101e6c] .cpu_startup_entry+0x50c/0x560
  [c0000005b76c7ed0] [c000000000043bd8] .start_secondary+0x328/0x360
  [c0000005b76c7f90] [c000000000008a6c] start_secondary_prolog+0x10/0x14

This warning is not a false positive either. RCU is not protecting code that
is being executed while the CPU is offline.

Instead of playing "whack-a-mole(TM)" and adding conditional statements to
the tracepoints we find that are used in this instance, simply add a
cpu_online() test to the tracepoint code where the tracepoint will be
ignored if the CPU is offline.

Use of raw_smp_processor_id() is fine, as there should never be a case where
the tracepoint code goes from running on a CPU that is online and suddenly
gets migrated to a CPU that is offline.

Link: http://lkml.kernel.org/r/1455387773-4245-1-git-send-email-kda@linux-powerpc.org

Reported-by: Denis Kirjanov 
Fixes: 97e1c18e8d17b ("tracing: Kernel Tracepoints")
Signed-off-by: Steven Rostedt 
Signed-off-by: Jiri Slaby

route: check and remove route cache when we get route

2016-03-02T15:29:14+00:00

[ Upstream commit deed49df7390d5239024199e249190328f1651e7 ]

Since the gc of ipv4 route was removed, the route cached would has
no chance to be removed, and even it has been timeout, it still could
be used, cause no code to check it's expires.

Fix this issue by checking  and removing route cache when we get route.

Signed-off-by: Xin Long 
Acked-by: Hannes Frederic Sowa 
Signed-off-by: David S. Miller 
Signed-off-by: Jiri Slaby

net:Add sysctl_max_skb_frags

2016-03-02T15:29:07+00:00

[ Upstream commit 5f74f82ea34c0da80ea0b49192bb5ea06e063593 ]

Devices may have limits on the number of fragments in an skb they support.
Current codebase uses a constant as maximum for number of fragments one
skb can hold and use.
When enabling scatter/gather and running traffic with many small messages
the codebase uses the maximum number of fragments and may thereby violate
the max for certain devices.
The patch introduces a global variable as max number of fragments.

Signed-off-by: Hans Westgaard Ry 
Reviewed-by: Håkon Bugge 
Acked-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Jiri Slaby

net/ipv6: add sysctl option accept_ra_min_hop_limit

2016-03-02T15:29:06+00:00

[ Upstream commit 8013d1d7eafb0589ca766db6b74026f76b7f5cb4 ]

Commit 6fd99094de2b ("ipv6: Don't reduce hop limit for an interface")
disabled accept hop limit from RA if it is smaller than the current hop
limit for security stuff. But this behavior kind of break the RFC definition.

RFC 4861, 6.3.4.  Processing Received Router Advertisements
   A Router Advertisement field (e.g., Cur Hop Limit, Reachable Time,
   and Retrans Timer) may contain a value denoting that it is
   unspecified.  In such cases, the parameter should be ignored and the
   host should continue using whatever value it is already using.

   If the received Cur Hop Limit value is non-zero, the host SHOULD set
   its CurHopLimit variable to the received value.

So add sysctl option accept_ra_min_hop_limit to let user choose the minimum
hop limit value they can accept from RA. And set default to 1 to meet RFC
standards.

Signed-off-by: Hangbin Liu 
Acked-by: YOSHIFUJI Hideaki 
Signed-off-by: David S. Miller 
Signed-off-by: Jiri Slaby

radix-tree: fix oops after radix_tree_iter_retry

2016-02-25T09:49:16+00:00

commit 732042821cfa106b3c20b9780e4c60fee9d68900 upstream.

Helper radix_tree_iter_retry() resets next_index to the current index.
In following radix_tree_next_slot current chunk size becomes zero.  This
isn't checked and it tries to dereference null pointer in slot.

Tagged iterator is fine because retry happens only at slot 0 where tag
bitmask in iter->tags is filled with single bit.

Fixes: 46437f9a554f ("radix-tree: fix race in gang lookup")
Signed-off-by: Konstantin Khlebnikov 
Cc: Matthew Wilcox 
Cc: Hugh Dickins 
Cc: Ohad Ben-Cohen 
Cc: Jeremiah Mahler 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Jiri Slaby

radix-tree: fix race in gang lookup

2016-02-25T09:49:15+00:00

commit 46437f9a554fbe3e110580ca08ab703b59f2f95a upstream.

If the indirect_ptr bit is set on a slot, that indicates we need to redo
the lookup.  Introduce a new function radix_tree_iter_retry() which
forces the loop to retry the lookup by setting 'slot' to NULL and
turning the iterator back to point at the problematic entry.

This is a pretty rare problem to hit at the moment; the lookup has to
race with a grow of the radix tree from a height of 0.  The consequences
of hitting this race are that gang lookup could return a pointer to a
radix_tree_node instead of a pointer to whatever the user had inserted
in the tree.

Fixes: cebbd29e1c2f ("radix-tree: rewrite gang lookup using iterator")
Signed-off-by: Matthew Wilcox 
Cc: Hugh Dickins 
Cc: Ohad Ben-Cohen 
Cc: Konstantin Khlebnikov 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Jiri Slaby