linux-stable.git/include/uapi/linux/v4l2-controls.h, branch v5.10.78

media: v4l2-ctrl: Add VP9 codec levels

2020-09-14T13:39:42+00:00

Add menu control for VP9 codec levels. A total of 14 levels are
defined for Profile 0 (8bit) and Profile 2 (10bit). Each level
is a set of constrained bitstreams coded with targeted resolutions,
frame rates, and bitrates.

The definitions have been taken from webm project [1].

[1] https://www.webmproject.org/vp9/levels/

Signed-off-by: Stanimir Varbanov 
Reviewed-by: Nicolas Dufresne 
Reviewed-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

media: v4l2-ctrl: Add frame-skip std encoder control

2020-09-01T12:13:29+00:00

Adds encoders standard v4l2 control for frame-skip. The control
is a copy of a custom encoder control so that other v4l2 encoder
drivers can use it.

Signed-off-by: Stanimir Varbanov 
Reviewed-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

media: v4l2-ctrls: Add encoder constant quality control

2020-09-01T12:13:29+00:00

When V4L2_CID_MPEG_VIDEO_BITRATE_MODE value is
V4L2_MPEG_VIDEO_BITRATE_MODE_CQ, encoder will produce
constant quality output indicated by
V4L2_CID_MPEG_VIDEO_CONSTANT_QUALITY control value.
Encoder will choose appropriate quantization parameter
and bitrate to produce requested frame quality level.

Signed-off-by: Maheshwar Ajja 
Reviewed-by: Hans Verkuil 
Signed-off-by: Stanimir Varbanov 
Signed-off-by: Mauro Carvalho Chehab

media: v4l2-ctrls: Add camera orientation and rotation

2020-05-18T13:34:21+00:00

Add support for the newly defined V4L2_CID_CAMERA_ORIENTATION
and V4L2_CID_CAMERA_SENSOR_ROTATION read-only controls used to report
the camera device mounting position and orientation respectively.

Reviewed-by: Laurent Pinchart 
Signed-off-by: Jacopo Mondi 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

media: v4l2-ctrl: Add H264 profile and levels

2020-04-21T11:26:26+00:00

Add H264 profile "Contrained High" and H264 levels "5.2",
"6.0", "6.1" and "6.2".

Signed-off-by: Maheshwar Ajja 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

media: atmel: atmel-isc-base: expose white balance as v4l2 controls

2020-02-24T15:12:28+00:00

This exposes the white balance configuration of the ISC as v4l2 controls
into userspace.
There are 8 controls available:
4 gain controls, sliders, for each of the BAYER components: R, B, GR, GB.
These gains are multipliers for each component, in format unsigned 0:4:9
with a default value of 512 (1.0 multiplier).
4 offset controls, sliders, for each of the BAYER components: R, B, GR, GB.
These offsets are added/substracted from each component, in format signed
1:12:0 with a default value of 0 (+/- 0)

To expose this to userspace, added 8 custom controls, in an auto cluster.

To summarize the functionality:
The auto cluster switch is the auto white balance control, and it works
like this:
AWB == 1: autowhitebalance is on, the do_white_balance button is inactive,
the gains/offsets are inactive, but volatile and readable.
Thus, the results of the whitebalance algorithm are available to userspace
to read at any time.
AWB == 0: autowhitebalance is off, cluster is in manual mode, user can
configure the gain/offsets directly. More than that, if the
do_white_balance button is pressed, the driver will perform
one-time-adjustment, (preferably with color checker card) and the userspace
can read again the new values.

With this feature, the userspace can save the coefficients and reinstall
them for example after reboot or reprobing the driver.

[hverkuil: fix checkpatch warning]
[hverkuil: minor spacing adjustments in the functionality description]

Signed-off-by: Eugen Hristev 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

media: add V4L2_CID_UNIT_CELL_SIZE control

2019-10-10T14:37:26+00:00

This control returns the unit cell size in nanometres. The struct provides
the width and the height in separated fields to take into consideration
asymmetric pixels and/or hardware binning.
This control is required for automatic calibration of sensors/cameras.

Reviewed-by: Philipp Zabel 
Signed-off-by: Ricardo Ribalda Delgado 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

media: v4l2-ctrl: add MPEG-2 profile and level controls

2019-05-29T10:19:12+00:00

Add MPEG-2 CID definitions for profiles and levels defined in ITU-T Rec.
H.262.

Signed-off-by: Philipp Zabel 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

media: coda/venus/s5p_mfc: fix control typo

2019-05-28T16:07:22+00:00

These two slice modes used by the V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE
control had a silly typo:

V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_MB
V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_BYTES

SICE should be SLICE.

Rename these enum values, keeping the old ones (under #ifndef __KERNEL__)
for backwards compatibility reasons.

Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

media: v4l: add I / P frame min max QP definitions

2019-04-22T14:25:36+00:00

Add following V4L2 QP parameters for H.264:
* V4L2_CID_MPEG_VIDEO_H264_I_FRAME_MIN_QP
* V4L2_CID_MPEG_VIDEO_H264_I_FRAME_MAX_QP
* V4L2_CID_MPEG_VIDEO_H264_P_FRAME_MIN_QP
* V4L2_CID_MPEG_VIDEO_H264_P_FRAME_MAX_QP

These controls will limit QP range for intra and inter frame,
provide more manual control to improve video encode quality.

Signed-off-by: Fish Lin 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab