linux-stable.git/include/uapi/linux/v4l2-controls.h, branch v3.18.76 Linux kernel stable tree [media] v4l: Add camera pan/tilt speed controls 2014-09-21T23:23:39+00:00 Vincent Palatin vpalatin@chromium.org 2014-09-03T19:38:39+00:00 e3d6eb1c16ef174a8fbbdd40770f5cbace0710e4 The V4L2_CID_PAN_SPEED and V4L2_CID_TILT_SPEED controls allow to move the camera by setting its rotation speed around its axis. Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Reviewed-by: Pawel Osciak <posciak@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> 
The V4L2_CID_PAN_SPEED and V4L2_CID_TILT_SPEED controls allow to move the
camera by setting its rotation speed around its axis.

Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Pawel Osciak <posciak@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
[media] v4l: Add test pattern colour component controls 2014-08-21T20:25:11+00:00 Sakari Ailus sakari.ailus@linux.intel.com 2014-05-28T12:38:21+00:00 0fc87864879c46afe145e20ec09c9dba2328e3be In many cases the test pattern has selectable values for each colour component. Implement controls for raw bayer components. Additional controls should be defined for colour components that are not covered by these controls. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> 
In many cases the test pattern has selectable values for each colour
component. Implement controls for raw bayer components. Additional controls
should be defined for colour components that are not covered by these
controls.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
[media] v4l2-ctrls: add RX RDS controls 2014-07-25T22:27:51+00:00 Hans Verkuil hans.verkuil@cisco.com 2014-07-21T13:45:40+00:00 9570a14847a9d334a0baf5a5921da2dbc6b9f6d2 The radio-miropcm20 driver has firmware that decodes the RDS signals. So in that case the RDS data becomes available in the form of controls. Add support for these controls to the control framework, allowing the miro driver to use them. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> 
The radio-miropcm20 driver has firmware that decodes the RDS signals. So in that
case the RDS data becomes available in the form of controls.

Add support for these controls to the control framework, allowing the miro driver
to use them.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
[media] v4l2-ctrls: add new RDS TX controls 2014-07-25T22:26:14+00:00 Hans Verkuil hans.verkuil@cisco.com 2014-07-21T13:45:37+00:00 811c508104d092683ea5fe86cdcfd23dded22934 The si4713 supports several RDS features not yet implemented in the driver. This patch adds the missing RDS functionality to the list of RDS controls. The ALT_FREQS control is a compound control containing an array of up to 25 (the maximum according to the RDS standard) frequencies. To support that the V4L2_CTRL_TYPE_U32 was added. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> 
The si4713 supports several RDS features not yet implemented in the driver.

This patch adds the missing RDS functionality to the list of RDS controls.

The ALT_FREQS control is a compound control containing an array of up
to 25 (the maximum according to the RDS standard) frequencies. To support
that the V4L2_CTRL_TYPE_U32 was added.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
[media] v4l2-ctrls/v4l2-controls.h: add MD controls 2014-07-17T14:57:27+00:00 Hans Verkuil hans.verkuil@cisco.com 2014-03-28T16:00:08+00:00 a77b4fc0bc328b0989f83220aba1c268e087107f Add the 'Detect' control class and the new motion detection controls. Those controls will be used by the solo6x10 and go7007 drivers. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> 
Add the 'Detect' control class and the new motion detection controls.
Those controls will be used by the solo6x10 and go7007 drivers.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
[media] v4l: add control for RF tuner PLL lock flag 2014-03-13T13:26:49+00:00 Antti Palosaari crope@iki.fi 2014-02-07T05:46:16+00:00 9aa4357e9b10b92acb85e30834f8eb4aa7b94554 Add volatile boolean control to indicate if tuner frequency synthesizer is locked to requested frequency. That means tuner is able to receive given frequency. Control is named as "PLL lock", since frequency synthesizers are based of phase-locked-loop. Maybe more general name could be wise still? Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> 
Add volatile boolean control to indicate if tuner frequency synthesizer
is locked to requested frequency. That means tuner is able to receive
given frequency. Control is named as "PLL lock", since frequency
synthesizers are based of phase-locked-loop. Maybe more general name
could be wise still?

Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
[media] v4l: reorganize RF tuner control ID numbers 2014-03-13T13:26:44+00:00 Antti Palosaari crope@iki.fi 2014-02-05T01:13:44+00:00 835b87c7adecef13bbc2a32c8e8437201144e9c4 It appears that controls are ordered by ID number when enumerating. That could lead illogical UI as controls are usually enumerated and drawn by the application at runtime. Change order of controls by reorganizing assigned IDs now as we can. It is not reasonable possible after the API is released. Also, leave some spare space between IDs too for possible future extensions. Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> 
It appears that controls are ordered by ID number when enumerating.
That could lead illogical UI as controls are usually enumerated and
drawn by the application at runtime.

Change order of controls by reorganizing assigned IDs now as we can.
It is not reasonable possible after the API is released. Also, leave
some spare space between IDs too for possible future extensions.

Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
[media] v4l: add RF tuner channel bandwidth control 2014-03-13T13:26:43+00:00 Antti Palosaari crope@iki.fi 2014-02-01T02:36:13+00:00 3ce569fd7c55ed99c04c4ebc5e49304f29a139bb Modern silicon RF tuners has one or more adjustable filters on signal path, in order to filter noise from desired radio channel. Add channel bandwidth control to tell the driver which is radio channel width we want receive. Filters could be then adjusted by the driver or hardware, using RF frequency and channel bandwidth as a base of filter calculations. On automatic mode (normal mode), bandwidth is calculated from sampling rate or tuning info got from userspace. That new control gives possibility to set manual mode and let user have more control for filters. Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> 
Modern silicon RF tuners has one or more adjustable filters on
signal path, in order to filter noise from desired radio channel.

Add channel bandwidth control to tell the driver which is radio
channel width we want receive. Filters could be then adjusted by
the driver or hardware, using RF frequency and channel bandwidth
as a base of filter calculations.

On automatic mode (normal mode), bandwidth is calculated from sampling
rate or tuning info got from userspace. That new control gives
possibility to set manual mode and let user have more control for
filters.

Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
[media] v4l2-controls.h: Add addtional Flash fault bits 2014-03-11T12:57:48+00:00 Daniel Jeong gshark.jeong@gmail.com 2014-03-03T09:52:08+00:00 935aa6b2e8a911e81baecec0537dd7e478dc8c91 Three Flash fault are added. V4L2_FLASH_FAULT_UNDER_VOLTAGE for the case low voltage below the min. limit. V4L2_FLASH_FAULT_INPUT_VOLTAGE for the case falling input voltage and chip adjust flash current not occur under voltage event. V4L2_FLASH_FAULT_LED_OVER_TEMPERATURE for the case the temperature exceed the maximun limit Signed-off-by: Daniel Jeong <gshark.jeong@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> 
Three Flash fault are added. V4L2_FLASH_FAULT_UNDER_VOLTAGE for the case low
voltage below the min. limit. V4L2_FLASH_FAULT_INPUT_VOLTAGE for the case
falling input voltage and chip adjust flash current not occur under voltage
event. V4L2_FLASH_FAULT_LED_OVER_TEMPERATURE for the case the temperature
exceed the maximun limit

Signed-off-by: Daniel Jeong <gshark.jeong@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
[media] v4l: add RF tuner gain controls 2014-03-05T18:46:56+00:00 Antti Palosaari crope@iki.fi 2014-01-25T02:44:26+00:00 80807fada4398d11ebd2bb28b3b49ca6a59e1260 Modern silicon RF tuners used nowadays has many controllable gain stages on signal path. Usually, but not always, there is at least 3 gain stages. Also on some cases there could be multiple gain stages within the ones specified here. However, I think that having these three controllable gain stages offers enough fine-tuning for real use cases. 1) LNA gain. That is first gain just after antenna input. 2) Mixer gain. It is located quite middle of the signal path, where RF signal is down-converted to IF/BB. 3) IF gain. That is last gain in order to adjust output signal level to optimal level for receiving party (usually demodulator ADC). Each gain stage could be set rather often both manual or automatic (AGC) mode. Due to that add separate controls for controlling operation mode. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> 
Modern silicon RF tuners used nowadays has many controllable gain
stages on signal path. Usually, but not always, there is at least
3 gain stages. Also on some cases there could be multiple gain
stages within the ones specified here. However, I think that having
these three controllable gain stages offers enough fine-tuning for
real use cases.

1) LNA gain. That is first gain just after antenna input.
2) Mixer gain. It is located quite middle of the signal path, where
RF signal is down-converted to IF/BB.
3) IF gain. That is last gain in order to adjust output signal level
to optimal level for receiving party (usually demodulator ADC).

Each gain stage could be set rather often both manual or automatic
(AGC) mode. Due to that add separate controls for controlling
operation mode.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>