[ Upstream commit 775f5729b47d8737f4f98e0141f61b3358245398 ]

Zero is a valid SDCA IRQ interrupt position so add a special value to
indicate that the IRQ is not used.

Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250624122844.2761627-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 9843cf7b6fd6f938c16fde51e86dd0e3ddbefb12 ]

The step for TLV on tas2781, should be 50 (-0.5dB).

Fixes: 678f38eba1f2 ("ASoC: tas2781: Add Header file for tas2781 driver")
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20250801021618.64627-1-baojun.xu@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt changes for 6.16-rc1.
  Included in here are the following:

   - USB offload support for audio devices.

     I think this takes the record for the most number of patch series
     (30+) over the longest period of time (2+ years) to get merged
     properly.

     Many props go to Wesley Cheng for seeing this effort through, they
     took a major out-of-tree hacked-up-monstrosity that was created by
     multiple vendors for their specific devices, got it all merged into
     a semi-coherent set of changes, and got all of the different major
     subsystems to agree on how this should be implemented both with
     changes to their code as well as userspace apis, AND wrangled the
     hardware companies into agreeing to go forward with this, despite
     making them all redo work they had already done in their private
     device trees.

     This feature offers major power savings on embedded devices where a
     USB audio stream can continue to flow while the rest of the system
     is sleeping, something that devices running on battery power really
     care about. There are still some more small tweaks left to be done
     here, and those patches are still out for review and arguing among
     the different hardware companies, but this is a major step forward
     and a great example of how to do upstream development well.

   - small number of thunderbolt fixes and updates, things seem to be
     slowing down here (famous last words...)

   - xhci refactors and reworking to try to handle some rough corner
     cases in some hardware implementations where things don't always
     work properly

   - typec driver updates

   - USB3 power management reworking and updates

   - Removal of some old and orphaned UDC gadget drivers that had not
     been used in a very long time, dropping over 11 thousand lines from
     the tree, always a nice thing, making up for the 12k lines added
     for the USB offload feature.

   - lots of little updates and fixes in different drivers

  All of these have been in linux-next for over 2 weeks, the USB offload
  logic has been in there for 8 weeks now, with no reported issues"

* tag 'usb-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits)
  ALSA: usb-audio: qcom: fix USB_XHCI dependency
  ASoC: qdsp6: fix compile-testing without CONFIG_OF
  usb: misc: onboard_usb_dev: fix build warning for CONFIG_USB_ONBOARD_DEV_USB5744=n
  usb: typec: tipd: fix typo in TPS_STATUS_HIGH_VOLAGE_WARNING macro
  USB: typec: fix const issue in typec_match()
  USB: gadget: udc: fix const issue in gadget_match_driver()
  USB: gadget: fix up const issue with struct usb_function_instance
  USB: serial: pl2303: add new chip PL2303GC-Q20 and PL2303GT-2AB
  USB: serial: bus: fix const issue in usb_serial_device_match()
  usb: usbtmc: Fix timeout value in get_stb
  usb: usbtmc: Fix read_stb function and get_stb ioctl
  ALSA: qc_audio_offload: try to reduce address space confusion
  ALSA: qc_audio_offload: avoid leaking xfer_buf allocation
  ALSA: qc_audio_offload: rename dma/iova/va/cpu/phys variables
  ALSA: usb-audio: qcom: Fix an error handling path in qc_usb_audio_probe()
  usb: misc: onboard_usb_dev: Fix usb5744 initialization sequence
  dt-bindings: usb: ti,usb8041: Add binding for TI USB8044 hub controller
  usb: misc: onboard_usb_dev: Add support for TI TUSB8044 hub
  usb: gadget: lpc32xx_udc: Use USB API functions rather than constants
  usb: gadget: epautoconf: Use USB API functions rather than constants
  ...

Sync with the pending 6.15 fixes.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

ASoC: Updates for v6.16

The changes in this release are quite large, mainly in drivers rather
than the core.  This is partly due to cleanups that touch a lot of
drivers and partly due to several relatively large new drivers.

 - Support for automatically enumerating DAIs from standards conforming
   SoundWire SDCA devices, further work is required for these to be
   useful in an actual card.
 - Conversion of quite a few drivers to newer GPIO APIs.
 - More helpers and cleanups from Mormimoto-san.
 - Support for a wider range of AVS platforms.
 - Support for AMD ACP 7.x platforms, Cirrus Logic CS35L63 and CS48L32,
   Everest Semiconductor ES8389, Longsoon-1 AC'97 controllers, nVidia
   Tegra264, Richtek ALC203 and RT9123 and Rockchip SAI controllers.

In commit d69d80484598 ("driver core: have match() callback in struct
bus_type take a const *"), the match bus callback was changed to have
the driver be a const pointer.  Unfortunately that const attribute was
thrown away when container_of() is called, which is not correct and was
not caught by the compiler due to how container_of() is implemented.
Fix this up by correctly preserving the const attribute of the driver
passed to the bus match function which requires the hdac_driver match
function to also take a const pointer for the driver structure.

Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Fixes: d69d80484598 ("driver core: have match() callback in struct bus_type take a const *")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2025052204-hyphen-thermal-3e72@gregkh
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Calibration data getting function for SPI and I2C HDA drivers are almost
same, which read the calibration data from UEFI. To put them into
tas2781_hda lib for code cleanup is more reasonable than to still keep
them in the codec driver. For tas2781 codec driver, there're two different
sources for calibrated data, one is from bin file, generated in factory
test, requested and read in codec driver side; the other is from user
space during device bootup.

Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>

Link: https://patch.msgid.link/20250522014347.1163-1-shenghao-ding@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:

Add helper functions to add DAPM widgets, routes, ALSA controls,
and DAI drivers, these will be used to create SDCA function device
drivers.

This series should provide most of the core functionality needed to
get a device registered and have a working DAPM graph within the
device. There are some features that still need additional work, these
are marked with FIXMEs in the code. The two main things are SDCA
Clock Muxes (not used in our devices and needs some ASoC core work),
and better support for more complex SDCA volume control definitions
(our parts have fairly simple volumes, and SDCA has a large amount of
flexibility in how the volume control is specified).

The next steps in the process are to add helpers for the DAI ops
themselves, some IRQ handling, and firmware download. And finally we
should be able to actually add the SDCA class driver itself.

Use the previously parsed DisCo information from ACPI to create the DAI
drivers required to connect an SDCA Function into an ASoC soundcard.

Create DAI driver structures and populate the supported sample rates
and sample widths into them based on the Input/Output Terminal and any
attach Clock Source entities. More complex relationships with channels
etc. will be added later as constraints as part of the DAI startup.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-8-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Use the previously parsed DisCo information from ACPI to create the
ALSA controls required by an SDCA Function. This maps all User and
Application level SDCA Controls to ALSA controls. Typically controls
marked with those access levels are just volumes and mutes.

SDCA defines volume controls as an integer in 1/256ths of a dB and
then provides a mechanism to specify what values are valid (range
templates). Currently only a simple case of a single linear volume
range with a power of 2 step size is supported. This allows the code
to expose the volume control using a simple shift. This will need
expanded in the future, to support more complex ranges and probably
also some additional control types but this should be sufficient to
for a first pass.

For non-dataport terminal widgets also add a pin switch to allow
that endpoint to be turned on/off.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>