linux-stable.git/include/sound, branch v4.14.166

ASoC: Define a set of DAPM pre/post-up events

2019-10-11T16:18:30+00:00

commit cfc8f568aada98f9608a0a62511ca18d647613e2 upstream.

Prepare to use SND_SOC_DAPM_PRE_POST_PMU definition to
reduce coming code size and make it more readable.

Cc: stable@vger.kernel.org
Signed-off-by: Oleksandr Suvorov 
Reviewed-by: Marcel Ziswiler 
Reviewed-by: Igor Opaniuk 
Reviewed-by: Fabio Estevam 
Link: https://lore.kernel.org/r/20190719100524.23300-2-oleksandr.suvorov@toradex.com
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

ALSA: compress: Fix regression on compressed capture streams

2019-08-16T08:13:52+00:00

[ Upstream commit 4475f8c4ab7b248991a60d9c02808dbb813d6be8 ]

A previous fix to the stop handling on compressed capture streams causes
some knock on issues. The previous fix updated snd_compr_drain_notify to
set the state back to PREPARED for capture streams. This causes some
issues however as the handling for snd_compr_poll differs between the
two states and some user-space applications were relying on the poll
failing after the stream had been stopped.

To correct this regression whilst still fixing the original problem the
patch was addressing, update the capture handling to skip the PREPARED
state rather than skipping the SETUP state as it has done until now.

Fixes: 4f2ab5e1d13d ("ALSA: compress: Fix stop handling on compressed capture streams")
Signed-off-by: Charles Keepax 
Acked-by: Vinod Koul 
Signed-off-by: Takashi Iwai 
Signed-off-by: Sasha Levin

ALSA: compress: Fix stop handling on compressed capture streams

2019-02-12T18:46:11+00:00

commit 4f2ab5e1d13d6aa77c55f4914659784efd776eb4 upstream.

It is normal user behaviour to start, stop, then start a stream
again without closing it. Currently this works for compressed
playback streams but not capture ones.

The states on a compressed capture stream go directly from OPEN to
PREPARED, unlike a playback stream which moves to SETUP and waits
for a write of data before moving to PREPARED. Currently however,
when a stop is sent the state is set to SETUP for both types of
streams. This leaves a capture stream in the situation where a new
start can't be sent as that requires the state to be PREPARED and
a new set_params can't be sent as that requires the state to be
OPEN. The only option being to close the stream, and then reopen.

Correct this issues by allowing snd_compr_drain_notify to set the
state depending on the stream direction, as we already do in
set_params.

Fixes: 49bb6402f1aa ("ALSA: compress_core: Add support for capture streams")
Signed-off-by: Charles Keepax 
Cc: 
Signed-off-by: Takashi Iwai 
Signed-off-by: Greg Kroah-Hartman

ALSA: pcm: Fix interval evaluation with openmin/max

2018-12-13T08:18:51+00:00

commit 5363857b916c1f48027e9b96ee8be8376bf20811 upstream.

As addressed in alsa-lib (commit b420056604f0), we need to fix the
case where the evaluation of PCM interval "(x x+1]" leading to
-EINVAL.  After applying rules, such an interval may be translated as
"(x x+1)".

Fixes: ff2d6acdf6f1 ("ALSA: pcm: Fix snd_interval_refine first/last with open min/max")
Cc: 
Signed-off-by: Takashi Iwai 
Signed-off-by: Greg Kroah-Hartman

sound: don't call skl_init_chip() to reset intel skl soc

2018-10-18T07:16:22+00:00

[ Upstream commit 75383f8d39d4c0fb96083dd460b7b139fbdac492 ]

Internally, skl_init_chip() calls snd_hdac_bus_init_chip() which
1) sets bus->chip_init to prevent multiple entrances before device
is stopped; 2) enables interrupt.

We shouldn't use it for the purpose of resetting device only because
1) when we really want to initialize device, we won't be able to do
so; 2) we are ready to handle interrupt yet, and kernel crashes when
interrupt comes in.

Rename azx_reset() to snd_hdac_bus_reset_link(), and use it to reset
device properly.

Fixes: 60767abcea3d ("ASoC: Intel: Skylake: Reset the controller in probe")
Reviewed-by: Takashi Iwai 
Signed-off-by: Yu Zhao 
Signed-off-by: Mark Brown 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ALSA: control: Hardening for potential Spectre v1

2018-05-01T19:58:16+00:00

commit 088e861edffb84879cf0c0d1b02eda078c3a0ffe upstream.

As recently Smatch suggested, a few places in ALSA control core codes
may expand the array directly from the user-space value with
speculation:

  sound/core/control.c:1003 snd_ctl_elem_lock() warn: potential spectre issue 'kctl->vd'
  sound/core/control.c:1031 snd_ctl_elem_unlock() warn: potential spectre issue 'kctl->vd'
  sound/core/control.c:844 snd_ctl_elem_info() warn: potential spectre issue 'kctl->vd'
  sound/core/control.c:891 snd_ctl_elem_read() warn: potential spectre issue 'kctl->vd'
  sound/core/control.c:939 snd_ctl_elem_write() warn: potential spectre issue 'kctl->vd'

Although all these seem doing only the first load without further
reference, we may want to stay in a safer side, so hardening with
array_index_nospec() would still make sense.

In this patch, we put array_index_nospec() to the common
snd_ctl_get_ioff*() helpers instead of each caller.  These helpers are
also referred from some drivers, too, and basically all usages are to
calculate the array index from the user-space value, hence it's better
to cover there.

BugLink: https://marc.info/?l=linux-kernel&m=152411496503418&w=2
Reported-by: Dan Carpenter 
Cc: 
Signed-off-by: Takashi Iwai 
Signed-off-by: Greg Kroah-Hartman

ALSA: pcm: Return -EBUSY for OSS ioctls changing busy streams

2018-04-24T07:36:34+00:00

commit 40cab6e88cb0b6c56d3f30b7491a20e803f948f6 upstream.

OSS PCM stream management isn't modal but it allows ioctls issued at
any time for changing the parameters.  In the previous hardening
patch ("ALSA: pcm: Avoid potential races between OSS ioctls and
read/write"), we covered these races and prevent the corruption by
protecting the concurrent accesses via params_lock mutex.  However,
this means that some ioctls that try to change the stream parameter
(e.g. channels or format) would be blocked until the read/write
finishes, and it may take really long.

Basically changing the parameter while reading/writing is an invalid
operation, hence it's even more user-friendly from the API POV if it
returns -EBUSY in such a situation.

This patch adds such checks in the relevant ioctls with the addition
of read/write access refcount.

Cc: 
Signed-off-by: Takashi Iwai 
Signed-off-by: Greg Kroah-Hartman

ALSA: hda - Fix yet remaining issue with vmaster 0dB initialization

2017-11-30T08:40:49+00:00

commit d6c0615f510bc1ee26cfb2b9a3343ac99b9c46fb upstream.

The previous fix for addressing the breakage in vmaster slave
initialization, commit a91d66129fb9 ("ALSA: hda - Fix incorrect TLV
callback check introduced during set_fs() removal"), introduced a new
helper to process over each slave kctl.  However, this helper passes
only the original kctl, not the virtual slave kctl.  As a result,
HD-audio driver (which is the only user so far) couldn't initialize
the slave correctly because it's trying to update the value directly
with the original kctl, not with the mapped kctl.

This patch fixes the situation again by passing both the mapped slaved
and original slave kctls to the function.  Luckily there is a single
caller as of now, so changing the call signature is no big matter.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=197959
Fixes: a91d66129fb9 ("ALSA: hda - Fix incorrect TLV callback check introduced during set_fs() removal")
Signed-off-by: Takashi Iwai 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'sound-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

2017-11-09T17:58:11+00:00

Pull sound fixes from Takashi Iwai:
 "The amount of the changes isn't as quite small as wished, nevertheless
  they are straight fixes that deserve merging to 4.14 final.

  Most of fixes are about ALSA core bugs spotted by fuzzer: a follow-up
  fix for the previous nested rwsem patch, a fix to avoid the resource
  hogs due to too many concurrent ALSA timer invocations, and a fix for
  a crash with SYSEX MIDI transfer over OSS sequencer emulation that is
  used by none but fuzzer.

  The rest are usual HD-audio and USB-audio device-specific quirks,
  which are safe to apply"

* tag 'sound-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - fix headset mic problem for Dell machines with alc274
  ALSA: seq: Fix OSS sysex delivery in OSS emulation
  ALSA: seq: Avoid invalid lockdep class warning
  ALSA: timer: Limit max instances per timer
  ALSA: usb-audio: support new Amanero Combo384 firmware version

ALSA: seq: Avoid invalid lockdep class warning

2017-11-06T19:25:31+00:00

The recent fix for adding rwsem nesting annotation was using the given
"hop" argument as the lock subclass key.  Although the idea itself
works, it may trigger a kernel warning like:
  BUG: looking up invalid subclass: 8
  ....
since the lockdep has a smaller number of subclasses (8) than we
currently allow for the hops there (10).

The current definition is merely a sanity check for avoiding the too
deep delivery paths, and the 8 hops are already enough.  So, as a
quick fix, just follow the max hops as same as the max lockdep
subclasses.

Fixes: 1f20f9ff57ca ("ALSA: seq: Fix nested rwsem annotation for lockdep splat")
Reported-by: syzbot 
Cc: 
Signed-off-by: Takashi Iwai