linux-stable.git/include/scsi, branch v3.4.112 Linux kernel stable tree SCSI: add 1024 max sectors black list flag 2015-09-18T01:20:33+00:00 Mike Christie michaelc@cs.wisc.edu 2015-04-21T03:42:24+00:00 3fe48d0393d88d12a524a928d10c61cd0d446523 commit 35e9a9f93994d7f7d12afa41169c7ba05513721b upstream. This works around a issue with qnap iscsi targets not handling large IOs very well. The target returns: VPD INQUIRY: Block limits page (SBC) Maximum compare and write length: 1 blocks Optimal transfer length granularity: 1 blocks Maximum transfer length: 4294967295 blocks Optimal transfer length: 4294967295 blocks Maximum prefetch, xdread, xdwrite transfer length: 0 blocks Maximum unmap LBA count: 8388607 Maximum unmap block descriptor count: 1 Optimal unmap granularity: 16383 Unmap granularity alignment valid: 0 Unmap granularity alignment: 0 Maximum write same length: 0xffffffff blocks Maximum atomic transfer length: 0 Atomic alignment: 0 Atomic transfer length granularity: 0 and it is *sometimes* able to handle at least one IO of size up to 8 MB. We have seen in traces where it will sometimes work, but other times it looks like it fails and it looks like it returns failures if we send multiple large IOs sometimes. Also it looks like it can return 2 different errors. It will sometimes send iscsi reject errors indicating out of resources or it will send invalid cdb illegal requests check conditions. And then when it sends iscsi rejects it does not seem to handle retries when there are command sequence holes, so I could not just add code to try and gracefully handle that error code. The problem is that we do not have a good contact for the company, so we are not able to determine under what conditions it returns which error and why it sometimes works. So, this patch just adds a new black list flag to set targets like this to the old max safe sectors of 1024. The max_hw_sectors changes added in 3.19 caused this regression, so I also ccing stable. Reported-by: Christian Hesse <list@eworm.de> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com> [lizf: Backported to 3.4: adjust context] Signed-off-by: Zefan Li <lizefan@huawei.com> 
commit 35e9a9f93994d7f7d12afa41169c7ba05513721b upstream.

This works around a issue with qnap iscsi targets not handling large IOs
very well.

The target returns:

VPD INQUIRY: Block limits page (SBC)
  Maximum compare and write length: 1 blocks
  Optimal transfer length granularity: 1 blocks
  Maximum transfer length: 4294967295 blocks
  Optimal transfer length: 4294967295 blocks
  Maximum prefetch, xdread, xdwrite transfer length: 0 blocks
  Maximum unmap LBA count: 8388607
  Maximum unmap block descriptor count: 1
  Optimal unmap granularity: 16383
  Unmap granularity alignment valid: 0
  Unmap granularity alignment: 0
  Maximum write same length: 0xffffffff blocks
  Maximum atomic transfer length: 0
  Atomic alignment: 0
  Atomic transfer length granularity: 0

and it is *sometimes* able to handle at least one IO of size up to 8 MB. We
have seen in traces where it will sometimes work, but other times it
looks like it fails and it looks like it returns failures if we send
multiple large IOs sometimes. Also it looks like it can return 2 different
errors. It will sometimes send iscsi reject errors indicating out of
resources or it will send invalid cdb illegal requests check conditions.
And then when it sends iscsi rejects it does not seem to handle retries
when there are command sequence holes, so I could not just add code to
try and gracefully handle that error code.

The problem is that we do not have a good contact for the company,
so we are not able to determine under what conditions it returns
which error and why it sometimes works.

So, this patch just adds a new black list flag to set targets like this to
the old max safe sectors of 1024. The max_hw_sectors changes added in 3.19
caused this regression, so I also ccing stable.

Reported-by: Christian Hesse <list@eworm.de>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li <lizefan@huawei.com>
usb-storage/SCSI: Add broken_fua blacklist flag 2015-04-14T09:33:56+00:00 Alan Stern stern@rowland.harvard.edu 2014-06-30T15:04:21+00:00 ef978a9da7dcda0f159a9ddf9136be389333cf17 commit b14bf2d0c0358140041d1c1805a674376964d0e0 upstream. Some buggy JMicron USB-ATA bridges don't know how to translate the FUA bit in READs or WRITEs. This patch adds an entry in unusual_devs.h and a blacklist flag to tell the sd driver not to use FUA. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Michael Büsch <m@bues.ch> Tested-by: Michael Büsch <m@bues.ch> Acked-by: James Bottomley <James.Bottomley@HansenPartnership.com> CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Zefan Li <lizefan@huawei.com> 
commit b14bf2d0c0358140041d1c1805a674376964d0e0 upstream.

Some buggy JMicron USB-ATA bridges don't know how to translate the FUA
bit in READs or WRITEs.  This patch adds an entry in unusual_devs.h
and a blacklist flag to tell the sd driver not to use FUA.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Michael Büsch <m@bues.ch>
Tested-by: Michael Büsch <m@bues.ch>
Acked-by: James Bottomley <James.Bottomley@HansenPartnership.com>
CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Zefan Li <lizefan@huawei.com>
ore: Fix wrong math in allocation of per device BIO 2014-02-13T19:51:11+00:00 Boaz Harrosh bharrosh@panasas.com 2013-11-21T15:58:08+00:00 0cc70c5ec55e404dd4c970a3566dc60508088932 commit aad560b7f63b495f48a7232fd086c5913a676e6f upstream. At IO preparation we calculate the max pages at each device and allocate a BIO per device of that size. The calculation was wrong on some unaligned corner cases offset/length combination and would make prepare return with -ENOMEM. This would be bad for pnfs-objects that would in that case IO through MDS. And fatal for exofs were it would fail writes with EIO. Fix it by doing the proper math, that will work in all cases. (I ran a test with all possible offset/length combinations this time round). Also when reading we do not need to allocate for the parity units since we jump over them. Also lower the max_io_length to take into account the parity pages so not to allocate BIOs bigger than PAGE_SIZE Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit aad560b7f63b495f48a7232fd086c5913a676e6f upstream.

At IO preparation we calculate the max pages at each device and
allocate a BIO per device of that size. The calculation was wrong
on some unaligned corner cases offset/length combination and would
make prepare return with -ENOMEM. This would be bad for pnfs-objects
that would in that case IO through MDS. And fatal for exofs were it
would fail writes with EIO.

Fix it by doing the proper math, that will work in all cases. (I
ran a test with all possible offset/length combinations this time
round).

Also when reading we do not need to allocate for the parity units
since we jump over them.

Also lower the max_io_length to take into account the parity pages
so not to allocate BIOs bigger than PAGE_SIZE

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SCSI: libsas: fix taskfile corruption in sas_ata_qc_fill_rtf 2012-07-16T16:04:37+00:00 Dan Williams dan.j.williams@intel.com 2012-06-22T17:52:34+00:00 76c6b958de9e72947ef08b1c9509f094c34abd8f commit 6ef1b512f4e6f936d89aa20be3d97a7ec7c290ac upstream. fill_result_tf() grabs the taskfile flags from the originating qc which sas_ata_qc_fill_rtf() promptly overwrites. The presence of an ata_taskfile in the sata_device makes it tempting to just copy the full contents in sas_ata_qc_fill_rtf(). However, libata really only wants the fis contents and expects the other portions of the taskfile to not be touched by ->qc_fill_rtf. To that end store a fis buffer in the sata_device and use ata_tf_from_fis() like every other ->qc_fill_rtf() implementation. Reported-by: Praveen Murali <pmurali@logicube.com> Tested-by: Praveen Murali <pmurali@logicube.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 6ef1b512f4e6f936d89aa20be3d97a7ec7c290ac upstream.

fill_result_tf() grabs the taskfile flags from the originating qc which
sas_ata_qc_fill_rtf() promptly overwrites.  The presence of an
ata_taskfile in the sata_device makes it tempting to just copy the full
contents in sas_ata_qc_fill_rtf().  However, libata really only wants
the fis contents and expects the other portions of the taskfile to not
be touched by ->qc_fill_rtf.  To that end store a fis buffer in the
sata_device and use ata_tf_from_fis() like every other ->qc_fill_rtf()
implementation.

Reported-by: Praveen Murali <pmurali@logicube.com>
Tested-by: Praveen Murali <pmurali@logicube.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SCSI: Fix NULL dereferences in scsi_cmd_to_driver 2012-07-16T16:04:30+00:00 Mark Rustad mark.d.rustad@intel.com 2012-06-21T19:23:42+00:00 5a89aae8085ef69a2ea9034ff8f5624327cd4efc commit 222a806af830fda34ad1f6bc991cd226916de060 upstream. Avoid crashing if the private_data pointer happens to be NULL. This has been seen sometimes when a host reset happens, notably when there are many LUNs: host3: Assigned Port ID 0c1601 scsi host3: libfc: Host reset succeeded on port (0c1601) BUG: unable to handle kernel NULL pointer dereference at 0000000000000350 IP: [<ffffffff81352bb8>] scsi_send_eh_cmnd+0x58/0x3a0 <snip> Process scsi_eh_3 (pid: 4144, threadinfo ffff88030920c000, task ffff880326b160c0) Stack: 000000010372e6ba 0000000000000282 000027100920dca0 ffffffffa0038ee0 0000000000000000 0000000000030003 ffff88030920dc80 ffff88030920dc80 00000002000e0000 0000000a00004000 ffff8803242f7760 ffff88031326ed80 Call Trace: [<ffffffff8105b590>] ? lock_timer_base+0x70/0x70 [<ffffffff81352fbe>] scsi_eh_tur+0x3e/0xc0 [<ffffffff81353a36>] scsi_eh_test_devices+0x76/0x170 [<ffffffff81354125>] scsi_eh_host_reset+0x85/0x160 [<ffffffff81354291>] scsi_eh_ready_devs+0x91/0x110 [<ffffffff813543fd>] scsi_unjam_host+0xed/0x1f0 [<ffffffff813546a8>] scsi_error_handler+0x1a8/0x200 [<ffffffff81354500>] ? scsi_unjam_host+0x1f0/0x1f0 [<ffffffff8106ec3e>] kthread+0x9e/0xb0 [<ffffffff81509264>] kernel_thread_helper+0x4/0x10 [<ffffffff8106eba0>] ? kthread_freezable_should_stop+0x70/0x70 [<ffffffff81509260>] ? gs_change+0x13/0x13 Code: 25 28 00 00 00 48 89 45 c8 31 c0 48 8b 87 80 00 00 00 48 8d b5 60 ff ff ff 89 d1 48 89 fb 41 89 d6 4c 89 fa 48 8b 80 b8 00 00 00 <48> 8b 80 50 03 00 00 48 8b 00 48 89 85 38 ff ff ff 48 8b 07 4c RIP [<ffffffff81352bb8>] scsi_send_eh_cmnd+0x58/0x3a0 RSP <ffff88030920dc50> CR2: 0000000000000350 Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 222a806af830fda34ad1f6bc991cd226916de060 upstream.

Avoid crashing if the private_data pointer happens to be NULL. This has
been seen sometimes when a host reset happens, notably when there are
many LUNs:

host3: Assigned Port ID 0c1601
scsi host3: libfc: Host reset succeeded on port (0c1601)
BUG: unable to handle kernel NULL pointer dereference at 0000000000000350
IP: [<ffffffff81352bb8>] scsi_send_eh_cmnd+0x58/0x3a0
<snip>
Process scsi_eh_3 (pid: 4144, threadinfo ffff88030920c000, task ffff880326b160c0)
Stack:
 000000010372e6ba 0000000000000282 000027100920dca0 ffffffffa0038ee0
 0000000000000000 0000000000030003 ffff88030920dc80 ffff88030920dc80
 00000002000e0000 0000000a00004000 ffff8803242f7760 ffff88031326ed80
Call Trace:
 [<ffffffff8105b590>] ? lock_timer_base+0x70/0x70
 [<ffffffff81352fbe>] scsi_eh_tur+0x3e/0xc0
 [<ffffffff81353a36>] scsi_eh_test_devices+0x76/0x170
 [<ffffffff81354125>] scsi_eh_host_reset+0x85/0x160
 [<ffffffff81354291>] scsi_eh_ready_devs+0x91/0x110
 [<ffffffff813543fd>] scsi_unjam_host+0xed/0x1f0
 [<ffffffff813546a8>] scsi_error_handler+0x1a8/0x200
 [<ffffffff81354500>] ? scsi_unjam_host+0x1f0/0x1f0
 [<ffffffff8106ec3e>] kthread+0x9e/0xb0
 [<ffffffff81509264>] kernel_thread_helper+0x4/0x10
 [<ffffffff8106eba0>] ? kthread_freezable_should_stop+0x70/0x70
 [<ffffffff81509260>] ? gs_change+0x13/0x13
Code: 25 28 00 00 00 48 89 45 c8 31 c0 48 8b 87 80 00 00 00 48 8d b5 60 ff ff ff 89 d1 48 89 fb 41 89 d6 4c 89 fa 48 8b 80 b8 00 00 00
 <48> 8b 80 50 03 00 00 48 8b 00 48 89 85 38 ff ff ff 48 8b 07 4c
RIP  [<ffffffff81352bb8>] scsi_send_eh_cmnd+0x58/0x3a0
 RSP <ffff88030920dc50>
CR2: 0000000000000350


Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SCSI & usb-storage: add try_rc_10_first flag 2012-07-16T16:04:10+00:00 Alan Stern stern@rowland.harvard.edu 2012-06-20T20:04:19+00:00 b18504e4a631e31edd939fe569342274927d4b41 commit 6a0bdffa0073857870a4ed1b4489762146359eb4 upstream. Several bug reports have been received recently for USB mass-storage devices that don't handle READ CAPACITY(16) commands properly. They report bogus sizes, in some cases becoming unusable as a result. The bugs were triggered by commit 09b6b51b0b6c1b9bb61815baf205e4d74c89ff04 (SCSI & usb-storage: add flags for VPD pages and REPORT LUNS), which caused usb-storage to stop overriding the SCSI level reported by devices. By default, the sd driver will try READ CAPACITY(16) first for any device whose level is above SCSI_SPC_2. It seems likely that any device large enough to require the use of READ CAPACITY(16) (i.e., 2 TB or more) would be able to handle READ CAPACITY(10) commands properly. Indeed, I don't know of any devices that don't handle READ CAPACITY(10) properly. Therefore this patch (as1559) adds a new flag telling the sd driver to try READ CAPACITY(10) before READ CAPACITY(16), and sets this flag for every USB mass-storage device. If a device really is larger than 2 TB, sd will fall back to READ CAPACITY(16) just as it used to. This fixes Bugzilla #43391. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Hans de Goede <hdegoede@redhat.com> CC: "James E.J. Bottomley" <JBottomley@parallels.com> CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 6a0bdffa0073857870a4ed1b4489762146359eb4 upstream.

Several bug reports have been received recently for USB mass-storage
devices that don't handle READ CAPACITY(16) commands properly.  They
report bogus sizes, in some cases becoming unusable as a result.

The bugs were triggered by commit
09b6b51b0b6c1b9bb61815baf205e4d74c89ff04 (SCSI & usb-storage: add
flags for VPD pages and REPORT LUNS), which caused usb-storage to stop
overriding the SCSI level reported by devices.  By default, the sd
driver will try READ CAPACITY(16) first for any device whose level is
above SCSI_SPC_2.

It seems likely that any device large enough to require the use of
READ CAPACITY(16) (i.e., 2 TB or more) would be able to handle READ
CAPACITY(10) commands properly.  Indeed, I don't know of any devices
that don't handle READ CAPACITY(10) properly.

Therefore this patch (as1559) adds a new flag telling the sd driver
to try READ CAPACITY(10) before READ CAPACITY(16), and sets this flag
for every USB mass-storage device.  If a device really is larger than
2 TB, sd will fall back to READ CAPACITY(16) just as it used to.

This fixes Bugzilla #43391.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Hans de Goede <hdegoede@redhat.com>
CC: "James E.J. Bottomley" <JBottomley@parallels.com>
CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[SCSI] libsas, libata: fix start of life for a sas ata_port 2012-04-23T11:11:47+00:00 Dan Williams dan.j.williams@intel.com 2012-03-22T04:09:07+00:00 b2024459252a9d2d312ee562f86f332a1498f412 This changes the ordering of initialization and probing events from: 1/ allocate rphy in PORTE_BYTES_DMAED, DISCE_REVALIDATE_DOMAIN 2/ allocate ata_port and schedule port probe in DISCE_PROBE ...to: 1/ allocate ata_port in PORTE_BYTES_DMAED, DISCE_REVALIDATE_DOMAIN 2/ allocate rphy in PORTE_BYTES_DMAED, DISCE_REVALIDATE_DOMAIN 3/ schedule port probe in DISCE_PROBE This ordering prevents PHYE_SIGNAL_LOSS_EVENTS from sneaking in to destrory ata devices before they have been fully initialized: BUG: unable to handle kernel paging request at 0000000000003b10 IP: [<ffffffffa0053d7e>] sas_ata_end_eh+0x12/0x5e [libsas] ... [<ffffffffa004d1af>] sas_unregister_common_dev+0x78/0xc9 [libsas] [<ffffffffa004d4d4>] sas_unregister_dev+0x4f/0xad [libsas] [<ffffffffa004d5b1>] sas_unregister_domain_devices+0x7f/0xbf [libsas] [<ffffffffa004c487>] sas_deform_port+0x61/0x1b8 [libsas] [<ffffffffa004bed0>] sas_phye_loss_of_signal+0x29/0x2b [libsas] ...and kills the awkward "sata domain_device briefly existing in the domain without an ata_port" state. Reported-by: Michal Kosciowski <michal.kosciowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> 
This changes the ordering of initialization and probing events from:
  1/ allocate rphy in PORTE_BYTES_DMAED, DISCE_REVALIDATE_DOMAIN
  2/ allocate ata_port and schedule port probe in DISCE_PROBE
...to:
  1/ allocate ata_port in PORTE_BYTES_DMAED, DISCE_REVALIDATE_DOMAIN
  2/ allocate rphy in PORTE_BYTES_DMAED, DISCE_REVALIDATE_DOMAIN
  3/ schedule port probe in DISCE_PROBE

This ordering prevents PHYE_SIGNAL_LOSS_EVENTS from sneaking in to
destrory ata devices before they have been fully initialized:

  BUG: unable to handle kernel paging request at 0000000000003b10
  IP: [<ffffffffa0053d7e>] sas_ata_end_eh+0x12/0x5e [libsas]
  ...
  [<ffffffffa004d1af>] sas_unregister_common_dev+0x78/0xc9 [libsas]
  [<ffffffffa004d4d4>] sas_unregister_dev+0x4f/0xad [libsas]
  [<ffffffffa004d5b1>] sas_unregister_domain_devices+0x7f/0xbf [libsas]
  [<ffffffffa004c487>] sas_deform_port+0x61/0x1b8 [libsas]
  [<ffffffffa004bed0>] sas_phye_loss_of_signal+0x29/0x2b [libsas]

...and kills the awkward "sata domain_device briefly existing in the
domain without an ata_port" state.

Reported-by: Michal Kosciowski <michal.kosciowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
[SCSI] libsas: introduce sas_work to fix sas_drain_work vs sas_queue_work 2012-04-23T11:03:39+00:00 Dan Williams dan.j.williams@intel.com 2012-03-09T19:00:06+00:00 22b9153faa2263aa89625de25e71c7d44c8dbd16 When requeuing work to a draining workqueue the last work instance may not be idle, so sas_queue_work() must not touch work->entry. Introduce sas_work with a drain_node list_head to have a private list for collecting work deferred due to drain collision. Fixes reports like: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff810410d4>] process_one_work+0x2e/0x338 Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> 
When requeuing work to a draining workqueue the last work instance may
not be idle, so sas_queue_work() must not touch work->entry.  Introduce
sas_work with a drain_node list_head to have a private list for
collecting work deferred due to drain collision.

Fixes reports like:
  BUG: unable to handle kernel NULL pointer dereference at           (null)
  IP: [<ffffffff810410d4>] process_one_work+0x2e/0x338

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
SCSI: Fix error handling when no ULD is attached 2012-04-15T18:08:53+00:00 Martin K. Petersen martin.petersen@oracle.com 2012-04-15T03:01:28+00:00 919f797a4c9c22ff5ec059744dba364dc600ece2 Commit 18a4d0a22ed6 ("[SCSI] Handle disk devices which can not process medium access commands") introduced a bug in which we would attempt to dereference the scsi driver even when the device had no ULD attached. Ensure that a driver is registered and make the driver accessor function more resilient to errors during device discovery. Reported-by: Elric Fu <elricfu1@gmail.com> Reported-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
Commit 18a4d0a22ed6 ("[SCSI] Handle disk devices which can not process
medium access commands") introduced a bug in which we would attempt to
dereference the scsi driver even when the device had no ULD attached.

Ensure that a driver is registered and make the driver accessor function
more resilient to errors during device discovery.

Reported-by: Elric Fu <elricfu1@gmail.com>
Reported-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6 2012-03-31T20:31:23+00:00 Linus Torvalds torvalds@linux-foundation.org 2012-03-31T20:31:23+00:00 a75ee6ecd411a50bf4da927c2fdb2cb56246a2bd Pull SCSI updates from James Bottomley: "This is primarily another round of driver updates (lpfc, bfa, fcoe, ipr) plus a new ufshcd driver. There shouldn't be anything controversial in here (The final deletion of scsi proc_ops which caused some build breakage has been held over until the next merge window to give us more time to stabilise it). I'm afraid, with me moving continents at exactly the wrong time, anything submitted after the merge window opened has been held over to the next merge window." * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (63 commits) [SCSI] ipr: Driver version 2.5.3 [SCSI] ipr: Increase alignment boundary of command blocks [SCSI] ipr: Increase max concurrent oustanding commands [SCSI] ipr: Remove unnecessary memory barriers [SCSI] ipr: Remove unnecessary interrupt clearing on new adapters [SCSI] ipr: Fix target id allocation re-use problem [SCSI] atp870u, mpt2sas, qla4xxx use pci_dev->revision [SCSI] fcoe: Drop the rtnl_mutex before calling fcoe_ctlr_link_up [SCSI] bfa: Update the driver version to 3.0.23.0 [SCSI] bfa: BSG and User interface fixes. [SCSI] bfa: Fix to avoid vport delete hang on request queue full scenario. [SCSI] bfa: Move service parameter programming logic into firmware. [SCSI] bfa: Revised Fabric Assigned Address(FAA) feature implementation. [SCSI] bfa: Flash controller IOC pll init fixes. [SCSI] bfa: Serialize the IOC hw semaphore unlock logic. [SCSI] bfa: Modify ISR to process pending completions [SCSI] bfa: Add fc host issue lip support [SCSI] mpt2sas: remove extraneous sas_log_info messages [SCSI] libfc: fcoe_transport_create fails in single-CPU environment [SCSI] fcoe: reduce contention for fcoe_rx_list lock [v2] ... 
Pull SCSI updates from James Bottomley:
 "This is primarily another round of driver updates (lpfc, bfa, fcoe,
  ipr) plus a new ufshcd driver.  There shouldn't be anything
  controversial in here (The final deletion of scsi proc_ops which
  caused some build breakage has been held over until the next merge
  window to give us more time to stabilise it).

  I'm afraid, with me moving continents at exactly the wrong time,
  anything submitted after the merge window opened has been held over to
  the next merge window."

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (63 commits)
  [SCSI] ipr: Driver version 2.5.3
  [SCSI] ipr: Increase alignment boundary of command blocks
  [SCSI] ipr: Increase max concurrent oustanding commands
  [SCSI] ipr: Remove unnecessary memory barriers
  [SCSI] ipr: Remove unnecessary interrupt clearing on new adapters
  [SCSI] ipr: Fix target id allocation re-use problem
  [SCSI] atp870u, mpt2sas, qla4xxx use pci_dev->revision
  [SCSI] fcoe: Drop the rtnl_mutex before calling fcoe_ctlr_link_up
  [SCSI] bfa: Update the driver version to 3.0.23.0
  [SCSI] bfa: BSG and User interface fixes.
  [SCSI] bfa: Fix to avoid vport delete hang on request queue full scenario.
  [SCSI] bfa: Move service parameter programming logic into firmware.
  [SCSI] bfa: Revised Fabric Assigned Address(FAA) feature implementation.
  [SCSI] bfa: Flash controller IOC pll init fixes.
  [SCSI] bfa: Serialize the IOC hw semaphore unlock logic.
  [SCSI] bfa: Modify ISR to process pending completions
  [SCSI] bfa: Add fc host issue lip support
  [SCSI] mpt2sas: remove extraneous sas_log_info messages
  [SCSI] libfc: fcoe_transport_create fails in single-CPU environment
  [SCSI] fcoe: reduce contention for fcoe_rx_list lock [v2]
  ...