linux-stable.git/include/net, branch v6.1.178

Bluetooth: L2CAP: Fix regressions caused by reusing ident

2026-07-24T13:55:18+00:00

commit 761fb8ec8778f0caf2bba5a41e3cff1ea86974f3 upstream.

This attempt to fix regressions caused by reusing ident which apparently
is not handled well on certain stacks causing the stack to not respond to
requests, so instead of simple returning the first unallocated id this
stores the last used tx_ident and then attempt to use the next until all
available ids are exausted and then cycle starting over to 1.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=221120
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221177
Fixes: 6c3ea155e5ee ("Bluetooth: L2CAP: Fix not tracking outstanding TX ident")
Signed-off-by: Luiz Augusto von Dentz 
Tested-by: Christian Eggers 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: hci_core: Enable buffer flow control for SCO/eSCO

2026-07-24T13:55:14+00:00

[ Upstream commit 13218453521d75916dfed55efb8e809bfc03cb4b ]

This enables buffer flow control for SCO/eSCO
(see: Bluetooth Core 6.0 spec: 6.22. Synchronous Flow Control Enable),
recently this has caused the following problem and is actually a nice
addition for the likes of Socket TX complete:

< HCI Command: Read Buffer Size (0x04|0x0005) plen 0
> HCI Event: Command Complete (0x0e) plen 11
      Read Buffer Size (0x04|0x0005) ncmd 1
        Status: Success (0x00)
        ACL MTU: 1021 ACL max packet: 5
        SCO MTU: 240  SCO max packet: 8
...
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
> HCI Event: Hardware Error (0x10) plen 1
        Code: 0x0a

To fix the code will now attempt to enable buffer flow control when
HCI_QUIRK_SYNC_FLOWCTL_SUPPORTED is set by the driver:

< HCI Command: Write Sync Fl.. (0x03|0x002f) plen 1
        Flow control: Enabled (0x01)
> HCI Event: Command Complete (0x0e) plen 4
      Write Sync Flow Control Enable (0x03|0x002f) ncmd 1
        Status: Success (0x00)

On success then HCI_SCO_FLOWCTL would be set which indicates sco_cnt
shall be used for flow contro.

Fixes: 7fedd3bb6b77 ("Bluetooth: Prioritize SCO traffic")
Signed-off-by: Luiz Augusto von Dentz 
Tested-by: Pauli Virtanen 
Stable-dep-of: 12917f591cea ("Bluetooth: hci_conn: Fix null ptr deref in hci_abort_conn()")
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: L2CAP: Fix not tracking outstanding TX ident

2026-07-24T13:55:14+00:00

[ Upstream commit 6c3ea155e5ee3e56606233acde8309afda66d483 ]

This attempts to proper track outstanding request by using struct ida
and allocating from it in l2cap_get_ident using ida_alloc_range which
would reuse ids as they are free, then upon completion release
the id using ida_free.

This fixes the qualification test case L2CAP/COS/CED/BI-29-C which
attempts to check if the host stack is able to work after 256 attempts
to connect which requires Ident field to use the full range of possible
values in order to pass the test.

Link: https://github.com/bluez/bluez/issues/1829
Signed-off-by: Luiz Augusto von Dentz 
Reviewed-by: Paul Menzel 
Stable-dep-of: 2641a9e0a1dd ("Bluetooth: L2CAP: cancel pending_rx_work before taking conn->lock")
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: L2CAP: Fix use-after-free in l2cap_sock_new_connection_cb()

2026-07-24T13:55:14+00:00

[ Upstream commit 6fef032af0092ed5ccb767239a9ac1bc38c08a40 ]

l2cap_sock_new_connection_cb() returned l2cap_pi(sk)->chan after
release_sock(parent). Once the parent lock is dropped the newly
enqueued child socket sk is reachable via the accept queue, so another
task can accept and free it before the callback dereferences sk,
resulting in a use-after-free.

Rework the ->new_connection() op so the core, rather than the callback,
owns the child channel's lifetime. The op now receives a pre-allocated
new_chan and returns an errno instead of allocating and returning a
channel. l2cap_new_connection() allocates the child channel and links
it into the conn list via __l2cap_chan_add() before invoking the
callback, so the conn-list reference keeps the channel alive once
release_sock(parent) exposes the socket to other tasks.

Channel configuration that was duplicated in l2cap_sock_init() and the
various new_connection callbacks is consolidated into
l2cap_chan_set_defaults(), which now inherits from the parent channel
when one is supplied.

Fixes: 8ffb929098a5 ("Bluetooth: Remove parent socket usage from l2cap_core.c")
Cc: stable@kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Siwei Zhang 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: Remove BT_HS

2026-07-24T13:55:14+00:00

[ Upstream commit e7b02296fb400ee64822fbdd81a0718449066333 ]

High Speed, Alternate MAC and PHY (AMP) extension, has been removed from
Bluetooth Core specification on 5.3:

https://www.bluetooth.com/blog/new-core-specification-v5-3-feature-enhancements/

Fixes: 244bc377591c ("Bluetooth: Add BT_HS config option")
Signed-off-by: Luiz Augusto von Dentz 
Stable-dep-of: 6fef032af009 ("Bluetooth: L2CAP: Fix use-after-free in l2cap_sock_new_connection_cb()")
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: Make handle of hci_conn be unique

2026-07-24T13:55:14+00:00

[ Upstream commit 181a42edddf51d5d9697ecdf365d72ebeab5afb0 ]

The handle of new hci_conn is always HCI_CONN_HANDLE_MAX + 1 if
the handle of the first hci_conn entry in hci_dev->conn_hash->list
is not HCI_CONN_HANDLE_MAX + 1. Use ida to manage the allocation of
hci_conn->handle to make it be unique.

Fixes: 9f78191cc9f1 ("Bluetooth: hci_conn: Always allocate unique handles")
Signed-off-by: Ziyang Xuan 
Signed-off-by: Luiz Augusto von Dentz 
Stable-dep-of: 6fef032af009 ("Bluetooth: L2CAP: Fix use-after-free in l2cap_sock_new_connection_cb()")
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

netfilter: nf_queue: pin bridge device while NFQUEUE holds fake dst

2026-07-24T13:54:59+00:00

commit c9c9b37f8c5505224e8d206184df3bb668ee00cf upstream.

The br_netfilter fake rtable is embedded in struct net_bridge and is
attached to bridged packets with skb_dst_set_noref(). If such a packet is
queued to NFQUEUE, __nf_queue() upgrades that fake dst with
skb_dst_force().

At that point the queued skb can hold a real dst reference after bridge
teardown has started. The problem is not that every bridged packet needs
its own dst reference. The problem is that NFQUEUE can keep the bridge
private fake dst alive after unregister begins.

Fix this by keeping the bridge fake dst model unchanged and pinning the
bridge master device only while the packet sits in NFQUEUE. Record the
bridge device in nf_queue_entry when the queued skb carries a bridge fake
dst, take a device reference for the queue lifetime, and drop it when the
queue entry is freed.

Also make sure queued entries are reaped when that bridge device goes
down, and drop the redundant nf_bridge_info_exists() test from the fake
dst detection.

This keeps netdev_priv(br->dev) alive until verdict completion, so the
embedded fake rtable and its metrics backing storage cannot be freed out
from under dst_release(). It also avoids the constant refcount bump and
avoids using ipv4-specific dst helpers for IPv6 bridge traffic.

Fixes: 34666d467cbf ("netfilter: bridge: move br_netfilter out of the core")
Cc: stable@kernel.org
Reported-by: Yuan Tan 
Reported-by: Yifan Wu 
Reported-by: Juefei Pu 
Reported-by: Xin Liu 
Signed-off-by: Haoze Xie 
Signed-off-by: Ren Wei 
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Greg Kroah-Hartman

ipvs: pass parsed transport offset to state handlers

2026-07-24T13:54:57+00:00

[ Upstream commit bae7ce7bafb59e42dc0e0e2999fdd9d1cffe3866 ]

IPVS callers already parse the packet into struct ip_vs_iphdr before
updating connection state. For IPv6 this records the real
transport-header offset after extension headers in iph.len.

Pass this parsed transport offset through ip_vs_set_state() and the
protocol state_transition() callback so protocol handlers can use the
same packet context as scheduling and NAT handling. This patch only
changes the common callback plumbing and adapts the protocol callback
signatures; TCP and SCTP start using the value in follow-up patches.

Signed-off-by: Yizhou Zhao 
Acked-by: Julian Anastasov 
Signed-off-by: Florian Westphal 
Stable-dep-of: 2500fa3958b1 ("ipvs: use parsed transport offset in TCP state lookup")
Signed-off-by: Sasha Levin

ipv6: mcast: Fix potential UAF in MLD delayed work

2026-07-24T13:54:57+00:00

[ Upstream commit 9b26518b6896a16b809b1e42986f4ebac7bccc1e ]

A race condition exists between device teardown and incoming MLD query
processing, leading to a Use-After-Free in the MLD delayed work.

During device destruction, the primary reference to inet6_dev is dropped,
which can drop its refcount to 0. The actual freeing of inet6_dev memory
is deferred via RCU.

Concurrently, the packet receive path runs under RCU read lock and obtains
the inet6_dev pointer. Because the memory is RCU-protected, CPU-0 can
safely dereference inet6_dev even if its refcount has hit 0.

However, if CPU-0 calls igmp6_event_query() and schedules delayed work, it
attempts to acquire a reference using in6_dev_hold(). This increments the
refcount from 0 to 1, triggering a "refcount_t: addition on 0" warning.
Since the inet6_dev memory is still scheduled to be freed after the RCU
grace period, the device is freed while the work is still scheduled.
When the work runs, it accesses the freed memory, causing a kernel panic.

Fix this by using refcount_inc_not_zero() (via a new helper
in6_dev_hold_safe()) to prevent acquiring a reference if the device is
already being destroyed. If the refcount is 0, we do not schedule the work.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet 
Reviewed-by: Ido Schimmel 
Link: https://patch.msgid.link/20260705181756.963063-3-edumazet@google.com
Signed-off-by: Paolo Abeni 
Signed-off-by: Sasha Levin

Bluetooth: ISO: exclude RFU bits from ISO_SDU_Length

2026-07-24T13:54:56+00:00

[ Upstream commit fd076d8deeab6f9f18ef13400f89e1f550df665b ]

slen contains ISO_SDU_Length (12 bits), RFU (2 bits),
Packet_Status_Flags (2 bits).

Exclude the RFU bits from hci_iso_data_len. Also add masks to the pack
macro.

Fixes: 4de0fc599eb9 ("Bluetooth: Add definitions for CIS connections")
Signed-off-by: Pauli Virtanen 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Sasha Levin