linux-stable.git/include/net, branch v4.19.37

net: IP6 defrag: use rbtrees for IPv6 defrag

2019-04-27T07:36:33+00:00

[ Upstream commit d4289fcc9b16b89619ee1c54f829e05e56de8b9a ]

Currently, IPv6 defragmentation code drops non-last fragments that
are smaller than 1280 bytes: see
commit 0ed4229b08c1 ("ipv6: defrag: drop non-last frags smaller than min mtu")

This behavior is not specified in IPv6 RFCs and appears to break
compatibility with some IPv6 implemenations, as reported here:
https://www.spinics.net/lists/netdev/msg543846.html

This patch re-uses common IP defragmentation queueing and reassembly
code in IPv6, removing the 1280 byte restriction.

v2: change handling of overlaps to match that of upstream.

Signed-off-by: Peter Oskolkov 
Reported-by: Tom Herbert 
Cc: Eric Dumazet 
Cc: Florian Westphal 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net: IP defrag: encapsulate rbtree defrag code into callable functions

2019-04-27T07:36:33+00:00

[ Upstream commit c23f35d19db3b36ffb9e04b08f1d91565d15f84f ]

This is a refactoring patch: without changing runtime behavior,
it moves rbtree-related code from IPv4-specific files/functions
into .h/.c defrag files shared with IPv6 defragmentation code.

v2: make handling of overlapping packets match upstream.

Signed-off-by: Peter Oskolkov 
Cc: Eric Dumazet 
Cc: Florian Westphal 
Cc: Tom Herbert 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net/tls: prevent bad memory access in tls_is_sk_tx_device_offloaded()

2019-04-27T07:36:32+00:00

[ Upstream commit b4f47f3848eb70986f75d06112af7b48b7f5f462 ]

Unlike '&&' operator, the '&' does not have short-circuit
evaluation semantics.  IOW both sides of the operator always
get evaluated.  Fix the wrong operator in
tls_is_sk_tx_device_offloaded(), which would lead to
out-of-bounds access for for non-full sockets.

Fixes: 4799ac81e52a ("tls: Add rx inline crypto offload")
Signed-off-by: Jakub Kicinski 
Reviewed-by: Dirk van der Merwe 
Reviewed-by: Simon Horman 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

xfrm: destroy xfrm_state synchronously on net exit path

2019-04-20T07:16:03+00:00

[ Upstream commit f75a2804da391571563c4b6b29e7797787332673 ]

xfrm_state_put() moves struct xfrm_state to the GC list
and schedules the GC work to clean it up. On net exit call
path, xfrm_state_flush() is called to clean up and
xfrm_flush_gc() is called to wait for the GC work to complete
before exit.

However, this doesn't work because one of the ->destructor(),
ipcomp_destroy(), schedules the same GC work again inside
the GC work. It is hard to wait for such a nested async
callback. This is also why syzbot still reports the following
warning:

 WARNING: CPU: 1 PID: 33 at net/ipv6/xfrm6_tunnel.c:351 xfrm6_tunnel_net_exit+0x2cb/0x500 net/ipv6/xfrm6_tunnel.c:351
 ...
  ops_exit_list.isra.0+0xb0/0x160 net/core/net_namespace.c:153
  cleanup_net+0x51d/0xb10 net/core/net_namespace.c:551
  process_one_work+0xd0c/0x1ce0 kernel/workqueue.c:2153
  worker_thread+0x143/0x14a0 kernel/workqueue.c:2296
  kthread+0x357/0x430 kernel/kthread.c:246
  ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352

In fact, it is perfectly fine to bypass GC and destroy xfrm_state
synchronously on net exit call path, because it is in process context
and doesn't need a work struct to do any blocking work.

This patch introduces xfrm_state_put_sync() which simply bypasses
GC, and lets its callers to decide whether to use this synchronous
version. On net exit path, xfrm_state_fini() and
xfrm6_tunnel_net_exit() use it. And, as ipcomp_destroy() itself is
blocking, it can use xfrm_state_put_sync() directly too.

Also rename xfrm_state_gc_destroy() to ___xfrm_state_destroy() to
reflect this change.

Fixes: b48c05ab5d32 ("xfrm: Fix warning in xfrm6_tunnel_net_exit.")
Reported-and-tested-by: syzbot+e9aebef558e3ed673934@syzkaller.appspotmail.com
Cc: Steffen Klassert 
Signed-off-by: Cong Wang 
Signed-off-by: Steffen Klassert 
Signed-off-by: Sasha Levin

Bluetooth: Fix debugfs NULL pointer dereference

2019-04-20T07:16:01+00:00

[ Upstream commit 30d65e0804d58a03d1a8ea4e12c6fc07ed08218b ]

Fix crash caused by NULL pointer dereference when debugfs functions
le_max_key_read, le_max_key_size_write, le_min_key_size_read or
le_min_key_size_write and Bluetooth adapter was powered off.

Fix is to move max_key_size and min_key_size from smp_dev to hci_dev.
At the same time they were renamed to le_max_key_size and
le_min_key_size.

BUG: unable to handle kernel NULL pointer dereference at 00000000000002e8
PGD 0 P4D 0
Oops: 0000 [#24] SMP PTI
CPU: 2 PID: 6255 Comm: cat Tainted: G      D    OE     4.18.9-200.fc28.x86_64 #1
Hardware name: LENOVO 4286CTO/4286CTO, BIOS 8DET76WW (1.46 ) 06/21/2018
RIP: 0010:le_max_key_size_read+0x45/0xb0 [bluetooth]
Code: 00 00 00 48 83 ec 10 65 48 8b 04 25 28 00 00 00 48 89 44 24 08 31 c0 48 8b 87 c8 00 00 00 48 8d 7c 24 04 48 8b 80 48 0a 00 00 <48> 8b 80 e8 02 00 00 0f b6 48 52 e8 fb b6 b3 ed be 04 00 00 00 48
RSP: 0018:ffffab23c3ff3df0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 00007f0b4ca2e000 RCX: ffffab23c3ff3f08
RDX: ffffffffc0ddb033 RSI: 0000000000000004 RDI: ffffab23c3ff3df4
RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000000
R10: ffffab23c3ff3ed8 R11: 0000000000000000 R12: ffffab23c3ff3f08
R13: 00007f0b4ca2e000 R14: 0000000000020000 R15: ffffab23c3ff3f08
FS:  00007f0b4ca0f540(0000) GS:ffff91bd5e280000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000002e8 CR3: 00000000629fa006 CR4: 00000000000606e0
Call Trace:
 full_proxy_read+0x53/0x80
 __vfs_read+0x36/0x180
 vfs_read+0x8a/0x140
 ksys_read+0x4f/0xb0
 do_syscall_64+0x5b/0x160
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Signed-off-by: Matias Karhumaa 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin

vrf: check accept_source_route on the original netdevice

2019-04-17T06:38:42+00:00

[ Upstream commit 8c83f2df9c6578ea4c5b940d8238ad8a41b87e9e ]

Configuration check to accept source route IP options should be made on
the incoming netdevice when the skb->dev is an l3mdev master. The route
lookup for the source route next hop also needs the incoming netdev.

v2->v3:
- Simplify by passing the original netdevice down the stack (per David
  Ahern).

Signed-off-by: Stephen Suryaputra 
Reviewed-by: David Ahern 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

netns: provide pure entropy for net_hash_mix()

2019-04-17T06:38:40+00:00

[ Upstream commit 355b98553789b646ed97ad801a619ff898471b92 ]

net_hash_mix() currently uses kernel address of a struct net,
and is used in many places that could be used to reveal this
address to a patient attacker, thus defeating KASLR, for
the typical case (initial net namespace, &init_net is
not dynamically allocated)

I believe the original implementation tried to avoid spending
too many cycles in this function, but security comes first.

Also provide entropy regardless of CONFIG_NET_NS.

Fixes: 0b4419162aa6 ("netns: introduce the net_hash_mix "salt" for hashes")
Signed-off-by: Eric Dumazet 
Reported-by: Amit Klein 
Reported-by: Benny Pinkas 
Cc: Pavel Emelyanov 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

netfilter: physdev: relax br_netfilter dependency

2019-04-05T20:33:15+00:00

[ Upstream commit 8e2f311a68494a6677c1724bdcb10bada21af37c ]

Following command:
  iptables -D FORWARD -m physdev ...
causes connectivity loss in some setups.

Reason is that iptables userspace will probe kernel for the module revision
of the physdev patch, and physdev has an artificial dependency on
br_netfilter (xt_physdev use makes no sense unless a br_netfilter module
is loaded).

This causes the "phydev" module to be loaded, which in turn enables the
"call-iptables" infrastructure.

bridged packets might then get dropped by the iptables ruleset.

The better fix would be to change the "call-iptables" defaults to 0 and
enforce explicit setting to 1, but that breaks backwards compatibility.

This does the next best thing: add a request_module call to checkentry.
This was a stray '-D ... -m physdev' won't activate br_netfilter
anymore.

Signed-off-by: Florian Westphal 
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Sasha Levin

sctp: get sctphdr by offset in sctp_compute_cksum

2019-04-03T04:26:17+00:00

[ Upstream commit 273160ffc6b993c7c91627f5a84799c66dfe4dee ]

sctp_hdr(skb) only works when skb->transport_header is set properly.

But in Netfilter, skb->transport_header for ipv6 is not guaranteed
to be right value for sctphdr. It would cause to fail to check the
checksum for sctp packets.

So fix it by using offset, which is always right in all places.

v1->v2:
  - Fix the changelog.

Fixes: e6d8b64b34aa ("net: sctp: fix and consolidate SCTP checksumming code")
Reported-by: Li Shuang 
Signed-off-by: Xin Long 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

packets: Always register packet sk in the same order

2019-04-03T04:26:17+00:00

[ Upstream commit a4dc6a49156b1f8d6e17251ffda17c9e6a5db78a ]

When using fanouts with AF_PACKET, the demux functions such as
fanout_demux_cpu will return an index in the fanout socket array, which
corresponds to the selected socket.

The ordering of this array depends on the order the sockets were added
to a given fanout group, so for FANOUT_CPU this means sockets are bound
to cpus in the order they are configured, which is OK.

However, when stopping then restarting the interface these sockets are
bound to, the sockets are reassigned to the fanout group in the reverse
order, due to the fact that they were inserted at the head of the
interface's AF_PACKET socket list.

This means that traffic that was directed to the first socket in the
fanout group is now directed to the last one after an interface restart.

In the case of FANOUT_CPU, traffic from CPU0 will be directed to the
socket that used to receive traffic from the last CPU after an interface
restart.

This commit introduces a helper to add a socket at the tail of a list,
then uses it to register AF_PACKET sockets.

Note that this changes the order in which sockets are listed in /proc and
with sock_diag.

Fixes: dc99f600698d ("packet: Add fanout support")
Signed-off-by: Maxime Chevallier 
Acked-by: Willem de Bruijn 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman