linux-stable.git/include/net, branch v4.14.136

VSOCK: use TCP state constants for sk_state

2019-08-04T07:31:59+00:00

commit 3b4477d2dcf2709d0be89e2a8dced3d0f4a017f2 upstream.

There are two state fields: socket->state and sock->sk_state.  The
socket->state field uses SS_UNCONNECTED, SS_CONNECTED, etc while the
sock->sk_state typically uses values that match TCP state constants
(TCP_CLOSE, TCP_ESTABLISHED).  AF_VSOCK does not follow this convention
and instead uses SS_* constants for both fields.

The sk_state field will be exposed to userspace through the vsock_diag
interface for ss(8), netstat(8), and other programs.

This patch switches sk_state to TCP state constants so that the meaning
of this field is consistent with other address families.  Not just
AF_INET and AF_INET6 use the TCP constants, AF_UNIX and others do too.

The following mapping was used to convert the code:

  SS_FREE -> TCP_CLOSE
  SS_UNCONNECTED -> TCP_CLOSE
  SS_CONNECTING -> TCP_SYN_SENT
  SS_CONNECTED -> TCP_ESTABLISHED
  SS_DISCONNECTING -> TCP_CLOSING
  VSOCK_SS_LISTEN -> TCP_LISTEN

In __vsock_create() the sk_state initialization was dropped because
sock_init_data() already initializes sk_state to TCP_CLOSE.

Signed-off-by: Stefan Hajnoczi 
Signed-off-by: David S. Miller 
[Adjusted net/vmw_vsock/hyperv_transport.c since the commit
b4562ca7925a ("hv_sock: add locking in the open/close/release code paths")
and the commit
c9d3fe9da094 ("VSOCK: fix outdated sk_state value in hvs_release()")
were backported before 3b4477d2dcf2.]
Signed-off-by: Dexuan Cui 
Signed-off-by: Greg Kroah-Hartman

tcp: fix tcp_set_congestion_control() use from bpf hook

2019-07-31T05:28:46+00:00

[ Upstream commit 8d650cdedaabb33e85e9b7c517c0c71fcecc1de9 ]

Neal reported incorrect use of ns_capable() from bpf hook.

bpf_setsockopt(...TCP_CONGESTION...)
  -> tcp_set_congestion_control()
   -> ns_capable(sock_net(sk)->user_ns, CAP_NET_ADMIN)
    -> ns_capable_common()
     -> current_cred()
      -> rcu_dereference_protected(current->cred, 1)

Accessing 'current' in bpf context makes no sense, since packets
are processed from softirq context.

As Neal stated : The capability check in tcp_set_congestion_control()
was written assuming a system call context, and then was reused from
a BPF call site.

The fix is to add a new parameter to tcp_set_congestion_control(),
so that the ns_capable() call is only performed under the right
context.

Fixes: 91b5b21c7c16 ("bpf: Add support for changing congestion control")
Signed-off-by: Eric Dumazet 
Cc: Lawrence Brakmo 
Reported-by: Neal Cardwell 
Acked-by: Neal Cardwell 
Acked-by: Lawrence Brakmo 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: make skb_dst_force return true when dst is refcounted

2019-07-31T05:28:46+00:00

[ Upstream commit b60a77386b1d4868f72f6353d35dabe5fbe981f2 ]

netfilter did not expect that skb_dst_force() can cause skb to lose its
dst entry.

I got a bug report with a skb->dst NULL dereference in netfilter
output path.  The backtrace contains nf_reinject(), so the dst might have
been cleared when skb got queued to userspace.

Other users were fixed via
if (skb_dst(skb)) {
	skb_dst_force(skb);
	if (!skb_dst(skb))
		goto handle_err;
}

But I think its preferable to make the 'dst might be cleared' part
of the function explicit.

In netfilter case, skb with a null dst is expected when queueing in
prerouting hook, so drop skb for the other hooks.

v2:
 v1 of this patch returned true in case skb had no dst entry.
 Eric said:
   Say if we have two skb_dst_force() calls for some reason
   on the same skb, only the first one will return false.

 This now returns false even when skb had no dst, as per Erics
 suggestion, so callers might need to check skb_dst() first before
 skb_dst_force().

Signed-off-by: Florian Westphal 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipvs: fix tinfo memory leak in start_sync_thread

2019-07-31T05:28:29+00:00

[ Upstream commit 5db7c8b9f9fc2aeec671ae3ca6375752c162e0e7 ]

syzkaller reports for memory leak in start_sync_thread [1]

As Eric points out, kthread may start and stop before the
threadfn function is called, so there is no chance the
data (tinfo in our case) to be released in thread.

Fix this by releasing tinfo in the controlling code instead.

[1]
BUG: memory leak
unreferenced object 0xffff8881206bf700 (size 32):
 comm "syz-executor761", pid 7268, jiffies 4294943441 (age 20.470s)
 hex dump (first 32 bytes):
   00 40 7c 09 81 88 ff ff 80 45 b8 21 81 88 ff ff  .@|......E.!....
   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
 backtrace:
   [<0000000057619e23>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline]
   [<0000000057619e23>] slab_post_alloc_hook mm/slab.h:439 [inline]
   [<0000000057619e23>] slab_alloc mm/slab.c:3326 [inline]
   [<0000000057619e23>] kmem_cache_alloc_trace+0x13d/0x280 mm/slab.c:3553
   [<0000000086ce5479>] kmalloc include/linux/slab.h:547 [inline]
   [<0000000086ce5479>] start_sync_thread+0x5d2/0xe10 net/netfilter/ipvs/ip_vs_sync.c:1862
   [<000000001a9229cc>] do_ip_vs_set_ctl+0x4c5/0x780 net/netfilter/ipvs/ip_vs_ctl.c:2402
   [<00000000ece457c8>] nf_sockopt net/netfilter/nf_sockopt.c:106 [inline]
   [<00000000ece457c8>] nf_setsockopt+0x4c/0x80 net/netfilter/nf_sockopt.c:115
   [<00000000942f62d4>] ip_setsockopt net/ipv4/ip_sockglue.c:1258 [inline]
   [<00000000942f62d4>] ip_setsockopt+0x9b/0xb0 net/ipv4/ip_sockglue.c:1238
   [<00000000a56a8ffd>] udp_setsockopt+0x4e/0x90 net/ipv4/udp.c:2616
   [<00000000fa895401>] sock_common_setsockopt+0x38/0x50 net/core/sock.c:3130
   [<0000000095eef4cf>] __sys_setsockopt+0x98/0x120 net/socket.c:2078
   [<000000009747cf88>] __do_sys_setsockopt net/socket.c:2089 [inline]
   [<000000009747cf88>] __se_sys_setsockopt net/socket.c:2086 [inline]
   [<000000009747cf88>] __x64_sys_setsockopt+0x26/0x30 net/socket.c:2086
   [<00000000ded8ba80>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:301
   [<00000000893b4ac8>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

Reported-by: syzbot+7e2e50c8adfccd2e5041@syzkaller.appspotmail.com
Suggested-by: Eric Biggers 
Fixes: 998e7a76804b ("ipvs: Use kthread_run() instead of doing a double-fork via kernel_thread()")
Signed-off-by: Julian Anastasov 
Acked-by: Simon Horman 
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Sasha Levin

ip6_tunnel: allow not to count pkts on tstats by passing dev as NULL

2019-07-21T07:04:28+00:00

[ Upstream commit 6f6a8622057c92408930c31698394fae1557b188 ]

A similar fix to Patch "ip_tunnel: allow not to count pkts on tstats by
setting skb's dev to NULL" is also needed by ip6_tunnel.

Signed-off-by: Xin Long 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

Bluetooth: Align minimum encryption key size for LE and BR/EDR connections

2019-06-25T03:36:54+00:00

commit d5bb334a8e171b262e48f378bd2096c0ea458265 upstream.

The minimum encryption key size for LE connections is 56 bits and to
align LE with BR/EDR, enforce 56 bits of minimum encryption key size for
BR/EDR connections as well.

Signed-off-by: Marcel Holtmann 
Signed-off-by: Johan Hedberg 
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman

tcp: add tcp_min_snd_mss sysctl

2019-06-17T17:52:44+00:00

commit 5f3e2bf008c2221478101ee72f5cb4654b9fc363 upstream.

Some TCP peers announce a very small MSS option in their SYN and/or
SYN/ACK messages.

This forces the stack to send packets with a very high network/cpu
overhead.

Linux has enforced a minimal value of 48. Since this value includes
the size of TCP options, and that the options can consume up to 40
bytes, this means that each segment can include only 8 bytes of payload.

In some cases, it can be useful to increase the minimal value
to a saner value.

We still let the default to 48 (TCP_MIN_SND_MSS), for compatibility
reasons.

Note that TCP_MAXSEG socket option enforces a minimal value
of (TCP_MIN_MSS). David Miller increased this minimal value
in commit c39508d6f118 ("tcp: Make TCP_MAXSEG minimum more correct.")
from 64 to 88.

We might in the future merge TCP_MIN_SND_MSS and TCP_MIN_MSS.

CVE-2019-11479 -- tcp mss hardcoded to 48

Signed-off-by: Eric Dumazet 
Suggested-by: Jonathan Looney 
Acked-by: Neal Cardwell 
Cc: Yuchung Cheng 
Cc: Tyler Hicks 
Cc: Bruce Curtis 
Cc: Jonathan Lemon 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tcp: limit payload size of sacked skbs

2019-06-17T17:52:43+00:00

commit 3b4929f65b0d8249f19a50245cd88ed1a2f78cff upstream.

Jonathan Looney reported that TCP can trigger the following crash
in tcp_shifted_skb() :

	BUG_ON(tcp_skb_pcount(skb) < pcount);

This can happen if the remote peer has advertized the smallest
MSS that linux TCP accepts : 48

An skb can hold 17 fragments, and each fragment can hold 32KB
on x86, or 64KB on PowerPC.

This means that the 16bit witdh of TCP_SKB_CB(skb)->tcp_gso_segs
can overflow.

Note that tcp_sendmsg() builds skbs with less than 64KB
of payload, so this problem needs SACK to be enabled.
SACK blocks allow TCP to coalesce multiple skbs in the retransmit
queue, thus filling the 17 fragments to maximal capacity.

CVE-2019-11477 -- u16 overflow of TCP_SKB_CB(skb)->tcp_gso_segs

Backport notes, provided by Joao Martins 

v4.15 or since commit 737ff314563 ("tcp: use sequence distance to
detect reordering") had switched from the packet-based FACK tracking and
switched to sequence-based.

v4.14 and older still have the old logic and hence on
tcp_skb_shift_data() needs to retain its original logic and have
@fack_count in sync. In other words, we keep the increment of pcount with
tcp_skb_pcount(skb) to later used that to update fack_count. To make it
more explicit we track the new skb that gets incremented to pcount in
@next_pcount, and we get to avoid the constant invocation of
tcp_skb_pcount(skb) all together.

Fixes: 832d11c5cd07 ("tcp: Try to restore large SKBs while SACK processing")
Signed-off-by: Eric Dumazet 
Reported-by: Jonathan Looney 
Acked-by: Neal Cardwell 
Reviewed-by: Tyler Hicks 
Cc: Yuchung Cheng 
Cc: Bruce Curtis 
Cc: Jonathan Lemon 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

Revert "Bluetooth: Align minimum encryption key size for LE and BR/EDR connections"

2019-06-15T09:54:59+00:00

This reverts commit 2fa7a155b25160696cd77cdd995536cf5e172e20 which is
commit d5bb334a8e171b262e48f378bd2096c0ea458265 upstream.

Lots of people have reported issues with this patch, and as there does
not seem to be a fix going into Linus's kernel tree any time soon,
revert the commit in the stable trees so as to get people's machines
working properly again.

Reported-by: Vasily Khoruzhick 
Reported-by: Hans de Goede 
Cc: Jeremy Cline 
Cc: Marcel Holtmann 
Cc: Johan Hedberg 
Signed-off-by: Greg Kroah-Hartman

ipv4: Define __ipv4_neigh_lookup_noref when CONFIG_INET is disabled

2019-06-11T10:21:51+00:00

commit 9b3040a6aafd7898ece7fc7efcbca71e42aa8069 upstream.

Define __ipv4_neigh_lookup_noref to return NULL when CONFIG_INET is disabled.

Fixes: 4b2a2bfeb3f0 ("neighbor: Call __ipv4_neigh_lookup_noref in neigh_xmit")
Reported-by: kbuild test robot 
Signed-off-by: David Ahern 
Signed-off-by: David S. Miller 
Cc: Nobuhiro Iwamatsu 
Signed-off-by: Greg Kroah-Hartman