linux-stable.git/include/net, branch linux-6.11.y Linux kernel stable tree Rename .data.once to .data..once to fix resetting WARN*_ONCE 2024-12-05T12:54:31+00:00 Masahiro Yamada masahiroy@kernel.org 2024-11-06T16:14:41+00:00 8d9cc7f1593ed809b0398a0f5f079fb5aca3e919 [ Upstream commit dbefa1f31a91670c9e7dac9b559625336206466f ] Commit b1fca27d384e ("kernel debug: support resetting WARN*_ONCE") added support for clearing the state of once warnings. However, it is not functional when CONFIG_LD_DEAD_CODE_DATA_ELIMINATION or CONFIG_LTO_CLANG is enabled, because .data.once matches the .data.[0-9a-zA-Z_]* pattern in the DATA_MAIN macro. Commit cb87481ee89d ("kbuild: linker script do not match C names unless LD_DEAD_CODE_DATA_ELIMINATION is configured") was introduced to suppress the issue for the default CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=n case, providing a minimal fix for stable backporting. We were aware this did not address the issue for CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=y. The plan was to apply correct fixes and then revert cb87481ee89d. [1] Seven years have passed since then, yet the #ifdef workaround remains in place. Meanwhile, commit b1fca27d384e introduced the .data.once section, and commit dc5723b02e52 ("kbuild: add support for Clang LTO") extended the #ifdef. Using a ".." separator in the section name fixes the issue for CONFIG_LD_DEAD_CODE_DATA_ELIMINATION and CONFIG_LTO_CLANG. [1]: https://lore.kernel.org/linux-kbuild/CAK7LNASck6BfdLnESxXUeECYL26yUDm0cwRZuM4gmaWUkxjL5g@mail.gmail.com/ Fixes: b1fca27d384e ("kernel debug: support resetting WARN*_ONCE") Fixes: dc5723b02e52 ("kbuild: add support for Clang LTO") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit dbefa1f31a91670c9e7dac9b559625336206466f ]

Commit b1fca27d384e ("kernel debug: support resetting WARN*_ONCE")
added support for clearing the state of once warnings. However,
it is not functional when CONFIG_LD_DEAD_CODE_DATA_ELIMINATION or
CONFIG_LTO_CLANG is enabled, because .data.once matches the
.data.[0-9a-zA-Z_]* pattern in the DATA_MAIN macro.

Commit cb87481ee89d ("kbuild: linker script do not match C names unless
LD_DEAD_CODE_DATA_ELIMINATION is configured") was introduced to suppress
the issue for the default CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=n case,
providing a minimal fix for stable backporting. We were aware this did
not address the issue for CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=y. The
plan was to apply correct fixes and then revert cb87481ee89d. [1]

Seven years have passed since then, yet the #ifdef workaround remains in
place. Meanwhile, commit b1fca27d384e introduced the .data.once section,
and commit dc5723b02e52 ("kbuild: add support for Clang LTO") extended
the #ifdef.

Using a ".." separator in the section name fixes the issue for
CONFIG_LD_DEAD_CODE_DATA_ELIMINATION and CONFIG_LTO_CLANG.

[1]: https://lore.kernel.org/linux-kbuild/CAK7LNASck6BfdLnESxXUeECYL26yUDm0cwRZuM4gmaWUkxjL5g@mail.gmail.com/

Fixes: b1fca27d384e ("kernel debug: support resetting WARN*_ONCE")
Fixes: dc5723b02e52 ("kbuild: add support for Clang LTO")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bluetooth: ISO: Do not emit LE BIG Create Sync if previous is pending 2024-12-05T12:53:27+00:00 Iulia Tanasescu iulia.tanasescu@nxp.com 2024-11-01T08:23:38+00:00 8958e1cee4e2eac1a5b825caa4dd96ce9ed975dd [ Upstream commit 42ecf1947135110ea08abeaca39741636f9a2285 ] The Bluetooth Core spec does not allow a LE BIG Create sync command to be sent to Controller if another one is pending (Vol 4, Part E, page 2586). In order to avoid this issue, the HCI_CONN_CREATE_BIG_SYNC was added to mark that the LE BIG Create Sync command has been sent for a hcon. Once the BIG Sync Established event is received, the hcon flag is erased and the next pending hcon is handled. Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Stable-dep-of: 07a9342b94a9 ("Bluetooth: ISO: Send BIG Create Sync via hci_sync") Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 42ecf1947135110ea08abeaca39741636f9a2285 ]

The Bluetooth Core spec does not allow a LE BIG Create sync command to be
sent to Controller if another one is pending (Vol 4, Part E, page 2586).

In order to avoid this issue, the HCI_CONN_CREATE_BIG_SYNC was added
to mark that the LE BIG Create Sync command has been sent for a hcon.
Once the BIG Sync Established event is received, the hcon flag is
erased and the next pending hcon is handled.

Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: 07a9342b94a9 ("Bluetooth: ISO: Send BIG Create Sync via hci_sync")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bluetooth: ISO: Do not emit LE PA Create Sync if previous is pending 2024-12-05T12:53:27+00:00 Iulia Tanasescu iulia.tanasescu@nxp.com 2024-11-01T08:23:36+00:00 f3689ce39de2d5db7a6a7862844e4a16ae7175e9 [ Upstream commit 4a5e0ba68676b3a77298cf646cd2b39c94fbd2f5 ] The Bluetooth Core spec does not allow a LE PA Create sync command to be sent to Controller if another one is pending (Vol 4, Part E, page 2493). In order to avoid this issue, the HCI_CONN_CREATE_PA_SYNC was added to mark that the LE PA Create Sync command has been sent for a hcon. Once the PA Sync Established event is received, the hcon flag is erased and the next pending hcon is handled. Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Stable-dep-of: 07a9342b94a9 ("Bluetooth: ISO: Send BIG Create Sync via hci_sync") Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 4a5e0ba68676b3a77298cf646cd2b39c94fbd2f5 ]

The Bluetooth Core spec does not allow a LE PA Create sync command to be
sent to Controller if another one is pending (Vol 4, Part E, page 2493).

In order to avoid this issue, the HCI_CONN_CREATE_PA_SYNC was added
to mark that the LE PA Create Sync command has been sent for a hcon.
Once the PA Sync Established event is received, the hcon flag is
erased and the next pending hcon is handled.

Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: 07a9342b94a9 ("Bluetooth: ISO: Send BIG Create Sync via hci_sync")
Signed-off-by: Sasha Levin <sashal@kernel.org>
wifi: radiotap: Avoid -Wflex-array-member-not-at-end warnings 2024-12-05T12:52:36+00:00 Gustavo A. R. Silva gustavoars@kernel.org 2024-10-04T20:14:44+00:00 119f99d7f6eff6d97f3b4f656ba4828c42e82bff [ Upstream commit 57be3d3562ca4aa62b8047bc681028cc402af8ce ] -Wflex-array-member-not-at-end was introduced in GCC-14, and we are getting ready to enable it, globally. So, in order to avoid ending up with a flexible-array member in the middle of multiple other structs, we use the `__struct_group()` helper to create a new tagged `struct ieee80211_radiotap_header_fixed`. This structure groups together all the members of the flexible `struct ieee80211_radiotap_header` except the flexible array. As a result, the array is effectively separated from the rest of the members without modifying the memory layout of the flexible structure. We then change the type of the middle struct members currently causing trouble from `struct ieee80211_radiotap_header` to `struct ieee80211_radiotap_header_fixed`. We also want to ensure that in case new members need to be added to the flexible structure, they are always included within the newly created tagged struct. For this, we use `static_assert()`. This ensures that the memory layout for both the flexible structure and the new tagged struct is the same after any changes. This approach avoids having to implement `struct ieee80211_radiotap_header_fixed` as a completely separate structure, thus preventing having to maintain two independent but basically identical structures, closing the door to potential bugs in the future. So, with these changes, fix the following warnings: drivers/net/wireless/ath/wil6210/txrx.c:309:50: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/intel/ipw2x00/ipw2100.c:2521:50: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/intel/ipw2x00/ipw2200.h:1146:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/intel/ipw2x00/libipw.h:595:36: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/marvell/libertas/radiotap.h:34:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/marvell/libertas/radiotap.h:5:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/microchip/wilc1000/mon.c:10:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/microchip/wilc1000/mon.c:15:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/virtual/mac80211_hwsim.c:758:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/virtual/mac80211_hwsim.c:767:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://patch.msgid.link/ZwBMtBZKcrzwU7l4@kspp Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 57be3d3562ca4aa62b8047bc681028cc402af8ce ]

-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.

So, in order to avoid ending up with a flexible-array member in the
middle of multiple other structs, we use the `__struct_group()`
helper to create a new tagged `struct ieee80211_radiotap_header_fixed`.
This structure groups together all the members of the flexible
`struct ieee80211_radiotap_header` except the flexible array.

As a result, the array is effectively separated from the rest of the
members without modifying the memory layout of the flexible structure.
We then change the type of the middle struct members currently causing
trouble from `struct ieee80211_radiotap_header` to `struct
ieee80211_radiotap_header_fixed`.

We also want to ensure that in case new members need to be added to the
flexible structure, they are always included within the newly created
tagged struct. For this, we use `static_assert()`. This ensures that the
memory layout for both the flexible structure and the new tagged struct
is the same after any changes.

This approach avoids having to implement `struct ieee80211_radiotap_header_fixed`
as a completely separate structure, thus preventing having to maintain
two independent but basically identical structures, closing the door
to potential bugs in the future.

So, with these changes, fix the following warnings:
drivers/net/wireless/ath/wil6210/txrx.c:309:50: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/ipw2x00/ipw2100.c:2521:50: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/ipw2x00/ipw2200.h:1146:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/ipw2x00/libipw.h:595:36: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/marvell/libertas/radiotap.h:34:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/marvell/libertas/radiotap.h:5:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/microchip/wilc1000/mon.c:10:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/microchip/wilc1000/mon.c:15:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/virtual/mac80211_hwsim.c:758:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/virtual/mac80211_hwsim.c:767:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/ZwBMtBZKcrzwU7l4@kspp
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
wifi: cfg80211: Add wiphy_delayed_work_pending() 2024-12-05T12:52:36+00:00 Remi Pommarel repk@triplefau.lt 2024-09-24T19:28:04+00:00 58b1007e603a47ad82b853bc823b85ce418824b7 [ Upstream commit 68d0021fe7231eec0fb84cd110cf62a6e782b72d ] Add wiphy_delayed_work_pending() to check if any delayed work timer is pending, that can be used to be sure that wiphy_delayed_work_queue() won't postpone an already pending delayed work. Signed-off-by: Remi Pommarel <repk@triplefau.lt> Link: https://patch.msgid.link/20240924192805.13859-2-repk@triplefau.lt [fix return value kernel-doc] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 68d0021fe7231eec0fb84cd110cf62a6e782b72d ]

Add wiphy_delayed_work_pending() to check if any delayed work timer is
pending, that can be used to be sure that wiphy_delayed_work_queue()
won't postpone an already pending delayed work.

Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Link: https://patch.msgid.link/20240924192805.13859-2-repk@triplefau.lt
[fix return value kernel-doc]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
bonding: add ns target multicast address to slave device 2024-11-22T14:39:50+00:00 Hangbin Liu liuhangbin@gmail.com 2024-11-11T10:16:49+00:00 a9347ce29299462c2bc556b3d2ee97910387e15b [ Upstream commit 8eb36164d1a6769a20ed43033510067ff3dab9ee ] Commit 4598380f9c54 ("bonding: fix ns validation on backup slaves") tried to resolve the issue where backup slaves couldn't be brought up when receiving IPv6 Neighbor Solicitation (NS) messages. However, this fix only worked for drivers that receive all multicast messages, such as the veth interface. For standard drivers, the NS multicast message is silently dropped because the slave device is not a member of the NS target multicast group. To address this, we need to make the slave device join the NS target multicast group, ensuring it can receive these IPv6 NS messages to validate the slave’s status properly. There are three policies before joining the multicast group: 1. All settings must be under active-backup mode (alb and tlb do not support arp_validate), with backup slaves and slaves supporting multicast. 2. We can add or remove multicast groups when arp_validate changes. 3. Other operations, such as enslaving, releasing, or setting NS targets, need to be guarded by arp_validate. Fixes: 4e24be018eb9 ("bonding: add new parameter ns_targets") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 8eb36164d1a6769a20ed43033510067ff3dab9ee ]

Commit 4598380f9c54 ("bonding: fix ns validation on backup slaves")
tried to resolve the issue where backup slaves couldn't be brought up when
receiving IPv6 Neighbor Solicitation (NS) messages. However, this fix only
worked for drivers that receive all multicast messages, such as the veth
interface.

For standard drivers, the NS multicast message is silently dropped because
the slave device is not a member of the NS target multicast group.

To address this, we need to make the slave device join the NS target
multicast group, ensuring it can receive these IPv6 NS messages to validate
the slave’s status properly.

There are three policies before joining the multicast group:
1. All settings must be under active-backup mode (alb and tlb do not support
   arp_validate), with backup slaves and slaves supporting multicast.
2. We can add or remove multicast groups when arp_validate changes.
3. Other operations, such as enslaving, releasing, or setting NS targets,
   need to be guarded by arp_validate.

Fixes: 4e24be018eb9 ("bonding: add new parameter ns_targets")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
bpf: Add sk_is_inet and IS_ICSK check in tls_sw_has_ctx_tx/rx 2024-11-17T14:09:53+00:00 Zijian Zhang zijianzhang@bytedance.com 2024-11-06T00:37:42+00:00 6781cfa93a6a1b7f5be6819a5a2dd8f30f47ca26 [ Upstream commit 44d0469f79bd3d0b3433732877358df7dc6b17b1 ] As the introduction of the support for vsock and unix sockets in sockmap, tls_sw_has_ctx_tx/rx cannot presume the socket passed in must be IS_ICSK. vsock and af_unix sockets have vsock_sock and unix_sock instead of inet_connection_sock. For these sockets, tls_get_ctx may return an invalid pointer and cause page fault in function tls_sw_ctx_rx. BUG: unable to handle page fault for address: 0000000000040030 Workqueue: vsock-loopback vsock_loopback_work RIP: 0010:sk_psock_strp_data_ready+0x23/0x60 Call Trace: ? __die+0x81/0xc3 ? no_context+0x194/0x350 ? do_page_fault+0x30/0x110 ? async_page_fault+0x3e/0x50 ? sk_psock_strp_data_ready+0x23/0x60 virtio_transport_recv_pkt+0x750/0x800 ? update_load_avg+0x7e/0x620 vsock_loopback_work+0xd0/0x100 process_one_work+0x1a7/0x360 worker_thread+0x30/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x112/0x130 ? __kthread_cancel_work+0x40/0x40 ret_from_fork+0x1f/0x40 v2: - Add IS_ICSK check v3: - Update the commits in Fixes Fixes: 634f1a7110b4 ("vsock: support sockmap") Fixes: 94531cfcbe79 ("af_unix: Add unix_stream_proto for sockmap") Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Acked-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Cong Wang <cong.wang@bytedance.com> Acked-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20241106003742.399240-1-zijianzhang@bytedance.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 44d0469f79bd3d0b3433732877358df7dc6b17b1 ]

As the introduction of the support for vsock and unix sockets in sockmap,
tls_sw_has_ctx_tx/rx cannot presume the socket passed in must be IS_ICSK.
vsock and af_unix sockets have vsock_sock and unix_sock instead of
inet_connection_sock. For these sockets, tls_get_ctx may return an invalid
pointer and cause page fault in function tls_sw_ctx_rx.

BUG: unable to handle page fault for address: 0000000000040030
Workqueue: vsock-loopback vsock_loopback_work
RIP: 0010:sk_psock_strp_data_ready+0x23/0x60
Call Trace:
 ? __die+0x81/0xc3
 ? no_context+0x194/0x350
 ? do_page_fault+0x30/0x110
 ? async_page_fault+0x3e/0x50
 ? sk_psock_strp_data_ready+0x23/0x60
 virtio_transport_recv_pkt+0x750/0x800
 ? update_load_avg+0x7e/0x620
 vsock_loopback_work+0xd0/0x100
 process_one_work+0x1a7/0x360
 worker_thread+0x30/0x390
 ? create_worker+0x1a0/0x1a0
 kthread+0x112/0x130
 ? __kthread_cancel_work+0x40/0x40
 ret_from_fork+0x1f/0x40

v2:
  - Add IS_ICSK check
v3:
  - Update the commits in Fixes

Fixes: 634f1a7110b4 ("vsock: support sockmap")
Fixes: 94531cfcbe79 ("af_unix: Add unix_stream_proto for sockmap")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20241106003742.399240-1-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
netfilter: nf_tables: wait for rcu grace period on net_device removal 2024-11-14T12:21:00+00:00 Pablo Neira Ayuso pablo@netfilter.org 2024-11-05T11:07:22+00:00 cb401e5799e0acacb405f2128097e9c4ccf82f8a [ Upstream commit c03d278fdf35e73dd0ec543b9b556876b9d9a8dc ] 8c873e219970 ("netfilter: core: free hooks with call_rcu") removed synchronize_net() call when unregistering basechain hook, however, net_device removal event handler for the NFPROTO_NETDEV was not updated to wait for RCU grace period. Note that 835b803377f5 ("netfilter: nf_tables_netdev: unregister hooks on net_device removal") does not remove basechain rules on device removal, I was hinted to remove rules on net_device removal later, see 5ebe0b0eec9d ("netfilter: nf_tables: destroy basechain and rules on netdevice removal"). Although NETDEV_UNREGISTER event is guaranteed to be handled after synchronize_net() call, this path needs to wait for rcu grace period via rcu callback to release basechain hooks if netns is alive because an ongoing netlink dump could be in progress (sockets hold a reference on the netns). Note that nf_tables_pre_exit_net() unregisters and releases basechain hooks but it is possible to see NETDEV_UNREGISTER at a later stage in the netns exit path, eg. veth peer device in another netns: cleanup_net() default_device_exit_batch() unregister_netdevice_many_notify() notifier_call_chain() nf_tables_netdev_event() __nft_release_basechain() In this particular case, same rule of thumb applies: if netns is alive, then wait for rcu grace period because netlink dump in the other netns could be in progress. Otherwise, if the other netns is going away then no netlink dump can be in progress and basechain hooks can be released inmediately. While at it, turn WARN_ON() into WARN_ON_ONCE() for the basechain validation, which should not ever happen. Fixes: 835b803377f5 ("netfilter: nf_tables_netdev: unregister hooks on net_device removal") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit c03d278fdf35e73dd0ec543b9b556876b9d9a8dc ]

8c873e219970 ("netfilter: core: free hooks with call_rcu") removed
synchronize_net() call when unregistering basechain hook, however,
net_device removal event handler for the NFPROTO_NETDEV was not updated
to wait for RCU grace period.

Note that 835b803377f5 ("netfilter: nf_tables_netdev: unregister hooks
on net_device removal") does not remove basechain rules on device
removal, I was hinted to remove rules on net_device removal later, see
5ebe0b0eec9d ("netfilter: nf_tables: destroy basechain and rules on
netdevice removal").

Although NETDEV_UNREGISTER event is guaranteed to be handled after
synchronize_net() call, this path needs to wait for rcu grace period via
rcu callback to release basechain hooks if netns is alive because an
ongoing netlink dump could be in progress (sockets hold a reference on
the netns).

Note that nf_tables_pre_exit_net() unregisters and releases basechain
hooks but it is possible to see NETDEV_UNREGISTER at a later stage in
the netns exit path, eg. veth peer device in another netns:

 cleanup_net()
  default_device_exit_batch()
   unregister_netdevice_many_notify()
    notifier_call_chain()
     nf_tables_netdev_event()
      __nft_release_basechain()

In this particular case, same rule of thumb applies: if netns is alive,
then wait for rcu grace period because netlink dump in the other netns
could be in progress. Otherwise, if the other netns is going away then
no netlink dump can be in progress and basechain hooks can be released
inmediately.

While at it, turn WARN_ON() into WARN_ON_ONCE() for the basechain
validation, which should not ever happen.

Fixes: 835b803377f5 ("netfilter: nf_tables_netdev: unregister hooks on net_device removal")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ipv4: ip_tunnel: Fix suspicious RCU usage warning in ip_tunnel_init_flow() 2024-11-08T15:30:47+00:00 Ido Schimmel idosch@nvidia.com 2024-10-22T06:38:22+00:00 6dfaa458fe923211c766238a224e0a3c0522935c [ Upstream commit ad4a3ca6a8e886f6491910a3ae5d53595e40597d ] There are code paths from which the function is called without holding the RCU read lock, resulting in a suspicious RCU usage warning [1]. Fix by using l3mdev_master_upper_ifindex_by_index() which will acquire the RCU read lock before calling l3mdev_master_upper_ifindex_by_index_rcu(). [1] WARNING: suspicious RCU usage 6.12.0-rc3-custom-gac8f72681cf2 #141 Not tainted ----------------------------- net/core/dev.c:876 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by ip/361: #0: ffffffff86fc7cb0 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x377/0xf60 stack backtrace: CPU: 3 UID: 0 PID: 361 Comm: ip Not tainted 6.12.0-rc3-custom-gac8f72681cf2 #141 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: <TASK> dump_stack_lvl+0xba/0x110 lockdep_rcu_suspicious.cold+0x4f/0xd6 dev_get_by_index_rcu+0x1d3/0x210 l3mdev_master_upper_ifindex_by_index_rcu+0x2b/0xf0 ip_tunnel_bind_dev+0x72f/0xa00 ip_tunnel_newlink+0x368/0x7a0 ipgre_newlink+0x14c/0x170 __rtnl_newlink+0x1173/0x19c0 rtnl_newlink+0x6c/0xa0 rtnetlink_rcv_msg+0x3cc/0xf60 netlink_rcv_skb+0x171/0x450 netlink_unicast+0x539/0x7f0 netlink_sendmsg+0x8c1/0xd80 ____sys_sendmsg+0x8f9/0xc20 ___sys_sendmsg+0x197/0x1e0 __sys_sendmsg+0x122/0x1f0 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: db53cd3d88dc ("net: Handle l3mdev in ip_tunnel_init_flow") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20241022063822.462057-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit ad4a3ca6a8e886f6491910a3ae5d53595e40597d ]

There are code paths from which the function is called without holding
the RCU read lock, resulting in a suspicious RCU usage warning [1].

Fix by using l3mdev_master_upper_ifindex_by_index() which will acquire
the RCU read lock before calling
l3mdev_master_upper_ifindex_by_index_rcu().

[1]
WARNING: suspicious RCU usage
6.12.0-rc3-custom-gac8f72681cf2 #141 Not tainted
-----------------------------
net/core/dev.c:876 RCU-list traversed in non-reader section!!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
1 lock held by ip/361:
 #0: ffffffff86fc7cb0 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x377/0xf60

stack backtrace:
CPU: 3 UID: 0 PID: 361 Comm: ip Not tainted 6.12.0-rc3-custom-gac8f72681cf2 #141
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
 <TASK>
 dump_stack_lvl+0xba/0x110
 lockdep_rcu_suspicious.cold+0x4f/0xd6
 dev_get_by_index_rcu+0x1d3/0x210
 l3mdev_master_upper_ifindex_by_index_rcu+0x2b/0xf0
 ip_tunnel_bind_dev+0x72f/0xa00
 ip_tunnel_newlink+0x368/0x7a0
 ipgre_newlink+0x14c/0x170
 __rtnl_newlink+0x1173/0x19c0
 rtnl_newlink+0x6c/0xa0
 rtnetlink_rcv_msg+0x3cc/0xf60
 netlink_rcv_skb+0x171/0x450
 netlink_unicast+0x539/0x7f0
 netlink_sendmsg+0x8c1/0xd80
 ____sys_sendmsg+0x8f9/0xc20
 ___sys_sendmsg+0x197/0x1e0
 __sys_sendmsg+0x122/0x1f0
 do_syscall_64+0xbb/0x1d0
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

Fixes: db53cd3d88dc ("net: Handle l3mdev in ip_tunnel_init_flow")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20241022063822.462057-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bluetooth: SCO: Fix UAF on sco_sock_timeout 2024-11-01T01:02:37+00:00 Luiz Augusto von Dentz luiz.von.dentz@intel.com 2024-10-22T16:31:08+00:00 80b05fbfa998480fb3d5299d93eab946f51e9c36 [ Upstream commit 1bf4470a3939c678fb822073e9ea77a0560bc6bb ] conn->sk maybe have been unlinked/freed while waiting for sco_conn_lock so this checks if the conn->sk is still valid by checking if it part of sco_sk_list. Reported-by: syzbot+4c0d0c4cde787116d465@syzkaller.appspotmail.com Tested-by: syzbot+4c0d0c4cde787116d465@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=4c0d0c4cde787116d465 Fixes: ba316be1b6a0 ("Bluetooth: schedule SCO timeouts with delayed_work") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 1bf4470a3939c678fb822073e9ea77a0560bc6bb ]

conn->sk maybe have been unlinked/freed while waiting for sco_conn_lock
so this checks if the conn->sk is still valid by checking if it part of
sco_sk_list.

Reported-by: syzbot+4c0d0c4cde787116d465@syzkaller.appspotmail.com
Tested-by: syzbot+4c0d0c4cde787116d465@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=4c0d0c4cde787116d465
Fixes: ba316be1b6a0 ("Bluetooth: schedule SCO timeouts with delayed_work")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>