linux-stable.git/include/net, branch linux-4.11.y

net: ipv6: Compare lwstate in detecting duplicate nexthops

2017-07-21T05:00:07+00:00

[ Upstream commit f06b7549b79e29a672336d4e134524373fb7a232 ]

Lennert reported a failure to add different mpls encaps in a multipath
route:

  $ ip -6 route add 1234::/16 \
        nexthop encap mpls 10 via fe80::1 dev ens3 \
        nexthop encap mpls 20 via fe80::1 dev ens3
  RTNETLINK answers: File exists

The problem is that the duplicate nexthop detection does not compare
lwtunnel configuration. Add it.

Fixes: 19e42e451506 ("ipv6: support for fib route lwtunnel encap attributes")
Signed-off-by: David Ahern 
Reported-by: João Taveira Araújo 
Reported-by: Lennert Buytenhek 
Acked-by: Roopa Prabhu 
Tested-by: Lennert Buytenhek 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

vxlan: fix hlist corruption

2017-07-21T05:00:07+00:00

[ Upstream commit 69e766612c4bcb79e19cebed9eed61d4222c1d47 ]

It's not a good idea to add the same hlist_node to two different hash lists.
This leads to various hard to debug memory corruptions.

Fixes: b1be00a6c39f ("vxlan: support both IPv4 and IPv6 sockets in a single vxlan device")
Signed-off-by: Jiri Benc 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

xfrm: fix stack access out of bounds with CONFIG_XFRM_SUB_POLICY

2017-07-05T12:41:40+00:00

commit 9b3eb54106cf6acd03f07cf0ab01c13676a226c2 upstream.

When CONFIG_XFRM_SUB_POLICY=y, xfrm_dst stores a copy of the flowi for
that dst. Unfortunately, the code that allocates and fills this copy
doesn't care about what type of flowi (flowi, flowi4, flowi6) gets
passed. In multiple code paths (from raw_sendmsg, from TCP when
replying to a FIN, in vxlan, geneve, and gre), the flowi that gets
passed to xfrm is actually an on-stack flowi4, so we end up reading
stuff from the stack past the end of the flowi4 struct.

Since xfrm_dst->origin isn't used anywhere following commit
ca116922afa8 ("xfrm: Eliminate "fl" and "pol" args to
xfrm_bundle_ok()."), just get rid of it.  xfrm_dst->partner isn't used
either, so get rid of that too.

Fixes: 9d6ec938019c ("ipv4: Use flowi4 in public route lookup interfaces.")
Signed-off-by: Sabrina Dubroca 
Signed-off-by: Steffen Klassert 
Signed-off-by: Greg Kroah-Hartman

net: ping: do not abuse udp_poll()

2017-06-14T13:07:34+00:00

[ Upstream commit 77d4b1d36926a9b8387c6b53eeba42bcaaffcea3 ]

Alexander reported various KASAN messages triggered in recent kernels

The problem is that ping sockets should not use udp_poll() in the first
place, and recent changes in UDP stack finally exposed this old bug.

Fixes: c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind")
Fixes: 6d0bfe226116 ("net: ipv6: Add IPv6 support to the ping socket.")
Signed-off-by: Eric Dumazet 
Reported-by: Sasha Levin 
Cc: Solar Designer 
Cc: Vasiliy Kulikov 
Cc: Lorenzo Colitti 
Acked-By: Lorenzo Colitti 
Tested-By: Lorenzo Colitti 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipv4: add reference counting to metrics

2017-06-07T10:10:04+00:00

[ Upstream commit 3fb07daff8e99243366a081e5129560734de4ada ]

Andrey Konovalov reported crashes in ipv4_mtu()

I could reproduce the issue with KASAN kernels, between
10.246.7.151 and 10.246.7.152 :

1) 20 concurrent netperf -t TCP_RR -H 10.246.7.152 -l 1000 &

2) At the same time run following loop :
while :
do
 ip ro add 10.246.7.152 dev eth0 src 10.246.7.151 mtu 1500
 ip ro del 10.246.7.152 dev eth0 src 10.246.7.151 mtu 1500
done

Cong Wang attempted to add back rt->fi in commit
82486aa6f1b9 ("ipv4: restore rt->fi for reference counting")
but this proved to add some issues that were complex to solve.

Instead, I suggested to add a refcount to the metrics themselves,
being a standalone object (in particular, no reference to other objects)

I tried to make this patch as small as possible to ease its backport,
instead of being super clean. Note that we believe that only ipv4 dst
need to take care of the metric refcount. But if this is wrong,
this patch adds the basic infrastructure to extend this to other
families.

Many thanks to Julian Anastasov for reviewing this patch, and Cong Wang
for his efforts on this problem.

Fixes: 2860583fe840 ("ipv4: Kill rt->fi")
Signed-off-by: Eric Dumazet 
Reported-by: Andrey Konovalov 
Reviewed-by: Julian Anastasov 
Acked-by: Cong Wang 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tcp: randomize timestamps on syncookies

2017-05-14T12:06:02+00:00

[ Upstream commit 84b114b98452c431299d99c135f751659e517acb ]

Whole point of randomization was to hide server uptime, but an attacker
can simply start a syn flood and TCP generates 'old style' timestamps,
directly revealing server jiffies value.

Also, TSval sent by the server to a particular remote address vary
depending on syncookies being sent or not, potentially triggering PAWS
drops for innocent clients.

Lets implement proper randomization, including for SYNcookies.

Also we do not need to export sysctl_tcp_timestamps, since it is not
used from a module.

In v2, I added Florian feedback and contribution, adding tsoff to
tcp_get_cookie_sock().

v3 removed one unused variable in tcp_v4_connect() as Florian spotted.

Fixes: 95a22caee396c ("tcp: randomize tcp timestamp offsets for each connection")
Signed-off-by: Eric Dumazet 
Reviewed-by: Florian Westphal 
Tested-by: Florian Westphal 
Cc: Yuchung Cheng 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipv6: reorder ip6_route_dev_notifier after ipv6_dev_notf

2017-05-14T12:06:02+00:00

[ Upstream commit 242d3a49a2a1a71d8eb9f953db1bcaa9d698ce00 ]

For each netns (except init_net), we initialize its null entry
in 3 places:

1) The template itself, as we use kmemdup()
2) Code around dst_init_metrics() in ip6_route_net_init()
3) ip6_route_dev_notify(), which is supposed to initialize it after
   loopback registers

Unfortunately the last one still happens in a wrong order because
we expect to initialize net->ipv6.ip6_null_entry->rt6i_idev to
net->loopback_dev's idev, thus we have to do that after we add
idev to loopback. However, this notifier has priority == 0 same as
ipv6_dev_notf, and ipv6_dev_notf is registered after
ip6_route_dev_notifier so it is called actually after
ip6_route_dev_notifier. This is similar to commit 2f460933f58e
("ipv6: initialize route null entry in addrconf_init()") which
fixes init_net.

Fix it by picking a smaller priority for ip6_route_dev_notifier.
Also, we have to release the refcnt accordingly when unregistering
loopback_dev because device exit functions are called before subsys
exit functions.

Acked-by: David Ahern 
Tested-by: David Ahern 
Signed-off-by: Cong Wang 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipv6: initialize route null entry in addrconf_init()

2017-05-14T12:06:02+00:00

[ Upstream commit 2f460933f58eee3393aba64f0f6d14acb08d1724 ]

Andrey reported a crash on init_net.ipv6.ip6_null_entry->rt6i_idev
since it is always NULL.

This is clearly wrong, we have code to initialize it to loopback_dev,
unfortunately the order is still not correct.

loopback_dev is registered very early during boot, we lose a chance
to re-initialize it in notifier. addrconf_init() is called after
ip6_route_init(), which means we have no chance to correct it.

Fix it by moving this initialization explicitly after
ipv6_add_dev(init_net.loopback_dev) in addrconf_init().

Reported-by: Andrey Konovalov 
Signed-off-by: Cong Wang 
Tested-by: Andrey Konovalov 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

sctp: get sock from transport in sctp_transport_update_pmtu

2017-04-05T14:20:06+00:00

This patch is almost to revert commit 02f3d4ce9e81 ("sctp: Adjust PMTU
updates to accomodate route invalidation."). As t->asoc can't be NULL
in sctp_transport_update_pmtu, it could get sk from asoc, and no need
to pass sk into that function.

It is also to remove some duplicated codes from that function.

Signed-off-by: Xin Long 
Acked-by: Marcelo Ricardo Leitner 
Signed-off-by: David S. Miller

sctp: check for dst and pathmtu update in sctp_packet_config

2017-04-03T21:54:33+00:00

This patch is to move sctp_transport_dst_check into sctp_packet_config
from sctp_packet_transmit and add pathmtu check in sctp_packet_config.

With this fix, sctp can update dst or pathmtu before appending chunks,
which can void dropping packets in sctp_packet_transmit when dst is
obsolete or dst's mtu is changed.

This patch is also to improve some other codes in sctp_packet_config.
It updates packet max_size with gso_max_size, checks for dst and
pathmtu, and appends ecne chunk only when packet is empty and asoc
is not NULL.

It makes sctp flush work better, as we only need to set up them once
for one flush schedule. It's also safe, since asoc is NULL only when
the packet is created by sctp_ootb_pkt_new in which it just gets the
new dst, no need to do more things for it other than set packet with
transport's pathmtu.

Signed-off-by: Xin Long 
Acked-by: Marcelo Ricardo Leitner 
Acked-by: Neil Horman 
Signed-off-by: David S. Miller