linux-stable.git/include/net/udp.h, branch linux-4.5.y

soreuseport: setsockopt SO_ATTACH_REUSEPORT_[CE]BPF

2016-01-05T03:49:59+00:00

Expose socket options for setting a classic or extended BPF program
for use when selecting sockets in an SO_REUSEPORT group.  These options
can be used on the first socket to belong to a group before bind or
on any socket in the group after bind.

This change includes refactoring of the existing sk_filter code to
allow reuse of the existing BPF filter validation checks.

Signed-off-by: Craig Gallek 
Acked-by: Alexei Starovoitov 
Signed-off-by: David S. Miller

soreuseport: fast reuseport UDP socket selection

2016-01-05T03:49:58+00:00

Include a struct sock_reuseport instance when a UDP socket binds to
a specific address for the first time with the reuseport flag set.
When selecting a socket for an incoming UDP packet, use the information
available in sock_reuseport if present.

This required adding an additional field to the UDP source address
equality function to differentiate between exact and wildcard matches.
The original use case allowed wildcard matches when checking for
existing port uses during bind.  The new use case of adding a socket
to a reuseport group requires exact address matching.

Performance test (using a machine with 2 CPU sockets and a total of
48 cores):  Create reuseport groups of varying size.  Use one socket
from this group per user thread (pinning each thread to a different
core) calling recvmmsg in a tight loop.  Record number of messages
received per second while saturating a 10G link.
  10 sockets: 18% increase (~2.8M -> 3.3M pkts/s)
  20 sockets: 14% increase (~2.9M -> 3.3M pkts/s)
  40 sockets: 13% increase (~3.0M -> 3.4M pkts/s)

This work is based off a similar implementation written by
Ying Cai  for implementing policy-based reuseport
selection.

Signed-off-by: Craig Gallek 
Signed-off-by: David S. Miller

net: Remove iocb argument from sendmsg and recvmsg

2015-03-02T18:06:31+00:00

After TIPC doesn't depend on iocb argument in its internal
implementations of sendmsg() and recvmsg() hooks defined in proto
structure, no any user is using iocb argument in them at all now.
Then we can drop the redundant iocb argument completely from kinds of
implementations of both sendmsg() and recvmsg() in the entire
networking stack.

Cc: Christoph Hellwig 
Suggested-by: Al Viro 
Signed-off-by: Ying Xue 
Signed-off-by: David S. Miller

udp: In udp_flow_src_port use random hash value if skb_get_hash fails

2015-02-27T21:00:01+00:00

In the unlikely event that skb_get_hash is unable to deduce a hash
in udp_flow_src_port we use a consistent random value instead.
This is specified in GRE/UDP draft section 3.2.1:
https://tools.ietf.org/html/draft-ietf-tsvwg-gre-in-udp-encap-04

Signed-off-by: Tom Herbert 
Signed-off-by: David S. Miller

udp: Generalize skb_udp_segment

2014-10-02T01:35:51+00:00

skb_udp_segment is the function called from udp4_ufo_fragment to
segment a UDP tunnel packet. This function currently assumes
segmentation is transparent Ethernet bridging (i.e. VXLAN
encapsulation). This patch generalizes the function to
operate on either Ethertype or IP protocol.

The inner_protocol field must be set to the protocol of the inner
header. This can now be either an Ethertype or an IP protocol
(in a union). A new flag in the skbuff indicates which type is
effective. skb_set_inner_protocol and skb_set_inner_ipproto
helper functions were added to set the inner_protocol. These
functions are called from the point where the tunnel encapsulation
is occuring.

When skb_udp_tunnel_segment is called, the function to segment the
inner packet is selected based on the inner IP or Ethertype. In the
case of an IP protocol encapsulation, the function is derived from
inet[6]_offloads. In the case of Ethertype, skb->protocol is
set to the inner_protocol and skb_mac_gso_segment is called. (GRE
currently does this, but it might be possible to lookup the protocol
in offload_base and call the appropriate segmenation function
directly).

Signed-off-by: Tom Herbert 
Signed-off-by: David S. Miller

udp: additional GRO support

2014-08-25T01:09:24+00:00

Implement GRO for UDPv6. Add UDP checksum verification in gro_receive
for both UDP4 and UDP6 calling skb_gro_checksum_validate_zero_check.

Signed-off-by: Tom Herbert 
Signed-off-by: David S. Miller

udp: Add function to make source port for UDP tunnels

2014-07-08T04:14:21+00:00

This patch adds udp_flow_src_port function which is intended to be
a common function that UDP tunnel implementations call to set the source
port. The source port is chosen so that a hash over the outer headers
(IP addresses and UDP ports) acts as suitable hash for the flow of the
encapsulated packet. In this manner, UDP encapsulation works with RSS
and ECMP based wrt the inner flow.

Signed-off-by: Tom Herbert 
Signed-off-by: David S. Miller

udp: call __skb_checksum_complete when doing full checksum

2014-06-15T08:00:49+00:00

In __udp_lib_checksum_complete check if checksum is being done over all
the data (len is equal to skb->len) and if it is call
__skb_checksum_complete instead of __skb_checksum_complete_head. This
allows checksum to be saved in checksum complete.

Signed-off-by: Tom Herbert 
Signed-off-by: David S. Miller

udp: Generic functions to set checksum

2014-06-05T05:46:38+00:00

Added udp_set_csum and udp6_set_csum functions to set UDP checksums
in packets. These are for simple UDP packets such as those that might
be created in UDP tunnels.

Signed-off-by: Tom Herbert 
Signed-off-by: David S. Miller

net: Split sk_no_check into sk_no_check_{rx,tx}

2014-05-23T20:28:53+00:00

Define separate fields in the sock structure for configuring disabling
checksums in both TX and RX-- sk_no_check_tx and sk_no_check_rx.
The SO_NO_CHECK socket option only affects sk_no_check_tx. Also,
removed UDP_CSUM_* defines since they are no longer necessary.

Signed-off-by: Tom Herbert 
Signed-off-by: David S. Miller