linux-stable.git/include/net/netfilter, branch v6.11 Linux kernel stable tree netfilter: nf_tables_ipv6: consider network offset in netdev/egress validation 2024-08-27T16:11:56+00:00 Pablo Neira Ayuso pablo@netfilter.org 2024-08-26T13:03:23+00:00 70c261d500951cf3ea0fcf32651aab9a65a91471 From netdev/egress, skb->len can include the ethernet header, therefore, subtract network offset from skb->len when validating IPv6 packet length. Fixes: 42df6e1d221d ("netfilter: Introduce egress hook") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 
From netdev/egress, skb->len can include the ethernet header, therefore,
subtract network offset from skb->len when validating IPv6 packet length.

Fixes: 42df6e1d221d ("netfilter: Introduce egress hook")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
netfilter: nf_tables: restore IP sanity checks for netdev/egress 2024-08-26T11:05:28+00:00 Pablo Neira Ayuso pablo@netfilter.org 2024-08-26T10:45:22+00:00 5fd0628918977a0afdc2e6bc562d8751b5d3b8c5 Subtract network offset to skb->len before performing IPv4 header sanity checks, then adjust transport offset from offset from mac header. Jorge Ortiz says: When small UDP packets (< 4 bytes payload) are sent from eth0, `meta l4proto udp` condition is not met because `NFT_PKTINFO_L4PROTO` is not set. This happens because there is a comparison that checks if the transport header offset exceeds the total length. This comparison does not take into account the fact that the skb network offset might be non-zero in egress mode (e.g., 14 bytes for Ethernet header). Fixes: 0ae8e4cca787 ("netfilter: nf_tables: set transport offset from mac header for netdev/egress") Reported-by: Jorge Ortiz <jorge.ortiz.escribano@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 
Subtract network offset to skb->len before performing IPv4 header sanity
checks, then adjust transport offset from offset from mac header.

Jorge Ortiz says:

When small UDP packets (< 4 bytes payload) are sent from eth0,
`meta l4proto udp` condition is not met because `NFT_PKTINFO_L4PROTO` is
not set. This happens because there is a comparison that checks if the
transport header offset exceeds the total length.  This comparison does
not take into account the fact that the skb network offset might be
non-zero in egress mode (e.g., 14 bytes for Ethernet header).

Fixes: 0ae8e4cca787 ("netfilter: nf_tables: set transport offset from mac header for netdev/egress")
Reported-by: Jorge Ortiz <jorge.ortiz.escribano@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
sysctl: treewide: constify the ctl_table argument of proc_handlers 2024-07-24T18:59:29+00:00 Joel Granados j.granados@samsung.com 2024-07-24T18:59:29+00:00 78eb4ea25cd5fdbdae7eb9fdf87b99195ff67508 const qualify the struct ctl_table argument in the proc_handler function signatures. This is a prerequisite to moving the static ctl_table structs into .rodata data which will ensure that proc_handler function pointers cannot be modified. This patch has been generated by the following coccinelle script: ``` virtual patch @r1@ identifier ctl, write, buffer, lenp, ppos; identifier func !~ "appldata_(timer|interval)_handler|sched_(rt|rr)_handler|rds_tcp_skbuf_handler|proc_sctp_do_(hmac_alg|rto_min|rto_max|udp_port|alpha_beta|auth|probe_interval)"; @@ int func( - struct ctl_table *ctl + const struct ctl_table *ctl ,int write, void *buffer, size_t *lenp, loff_t *ppos); @r2@ identifier func, ctl, write, buffer, lenp, ppos; @@ int func( - struct ctl_table *ctl + const struct ctl_table *ctl ,int write, void *buffer, size_t *lenp, loff_t *ppos) { ... } @r3@ identifier func; @@ int func( - struct ctl_table * + const struct ctl_table * ,int , void *, size_t *, loff_t *); @r4@ identifier func, ctl; @@ int func( - struct ctl_table *ctl + const struct ctl_table *ctl ,int , void *, size_t *, loff_t *); @r5@ identifier func, write, buffer, lenp, ppos; @@ int func( - struct ctl_table * + const struct ctl_table * ,int write, void *buffer, size_t *lenp, loff_t *ppos); ``` * Code formatting was adjusted in xfs_sysctl.c to comply with code conventions. The xfs_stats_clear_proc_handler, xfs_panic_mask_proc_handler and xfs_deprecated_dointvec_minmax where adjusted. * The ctl_table argument in proc_watchdog_common was const qualified. This is called from a proc_handler itself and is calling back into another proc_handler, making it necessary to change it as part of the proc_handler migration. Co-developed-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Co-developed-by: Joel Granados <j.granados@samsung.com> Signed-off-by: Joel Granados <j.granados@samsung.com> 
const qualify the struct ctl_table argument in the proc_handler function
signatures. This is a prerequisite to moving the static ctl_table
structs into .rodata data which will ensure that proc_handler function
pointers cannot be modified.

This patch has been generated by the following coccinelle script:

```
  virtual patch

  @r1@
  identifier ctl, write, buffer, lenp, ppos;
  identifier func !~ "appldata_(timer|interval)_handler|sched_(rt|rr)_handler|rds_tcp_skbuf_handler|proc_sctp_do_(hmac_alg|rto_min|rto_max|udp_port|alpha_beta|auth|probe_interval)";
  @@

  int func(
  - struct ctl_table *ctl
  + const struct ctl_table *ctl
    ,int write, void *buffer, size_t *lenp, loff_t *ppos);

  @r2@
  identifier func, ctl, write, buffer, lenp, ppos;
  @@

  int func(
  - struct ctl_table *ctl
  + const struct ctl_table *ctl
    ,int write, void *buffer, size_t *lenp, loff_t *ppos)
  { ... }

  @r3@
  identifier func;
  @@

  int func(
  - struct ctl_table *
  + const struct ctl_table *
    ,int , void *, size_t *, loff_t *);

  @r4@
  identifier func, ctl;
  @@

  int func(
  - struct ctl_table *ctl
  + const struct ctl_table *ctl
    ,int , void *, size_t *, loff_t *);

  @r5@
  identifier func, write, buffer, lenp, ppos;
  @@

  int func(
  - struct ctl_table *
  + const struct ctl_table *
    ,int write, void *buffer, size_t *lenp, loff_t *ppos);

```

* Code formatting was adjusted in xfs_sysctl.c to comply with code
  conventions. The xfs_stats_clear_proc_handler,
  xfs_panic_mask_proc_handler and xfs_deprecated_dointvec_minmax where
  adjusted.

* The ctl_table argument in proc_watchdog_common was const qualified.
  This is called from a proc_handler itself and is calling back into
  another proc_handler, making it necessary to change it as part of the
  proc_handler migration.

Co-developed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Co-developed-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Joel Granados <j.granados@samsung.com>
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next 2024-07-09T15:01:46+00:00 Paolo Abeni pabeni@redhat.com 2024-07-09T15:01:46+00:00 7b769adc2612b495d94a4b4537ffaa725861d763 Daniel Borkmann says: ==================== pull-request: bpf-next 2024-07-08 The following pull-request contains BPF updates for your *net-next* tree. We've added 102 non-merge commits during the last 28 day(s) which contain a total of 127 files changed, 4606 insertions(+), 980 deletions(-). The main changes are: 1) Support resilient split BTF which cuts down on duplication and makes BTF as compact as possible wrt BTF from modules, from Alan Maguire & Eduard Zingerman. 2) Add support for dumping kfunc prototypes from BTF which enables both detecting as well as dumping compilable prototypes for kfuncs, from Daniel Xu. 3) Batch of s390x BPF JIT improvements to add support for BPF arena and to implement support for BPF exceptions, from Ilya Leoshkevich. 4) Batch of riscv64 BPF JIT improvements in particular to add 12-argument support for BPF trampolines and to utilize bpf_prog_pack for the latter, from Pu Lehui. 5) Extend BPF test infrastructure to add a CHECKSUM_COMPLETE validation option for skbs and add coverage along with it, from Vadim Fedorenko. 6) Inline bpf_get_current_task/_btf() helpers in the arm64 BPF JIT which gives a small 1% performance improvement in micro-benchmarks, from Puranjay Mohan. 7) Extend the BPF verifier to track the delta between linked registers in order to better deal with recent LLVM code optimizations, from Alexei Starovoitov. 8) Fix bpf_wq_set_callback_impl() kfunc signature where the third argument should have been a pointer to the map value, from Benjamin Tissoires. 9) Extend BPF selftests to add regular expression support for test output matching and adjust some of the selftest when compiled under gcc, from Cupertino Miranda. 10) Simplify task_file_seq_get_next() and remove an unnecessary loop which always iterates exactly once anyway, from Dan Carpenter. 11) Add the capability to offload the netfilter flowtable in XDP layer through kfuncs, from Florian Westphal & Lorenzo Bianconi. 12) Various cleanups in networking helpers in BPF selftests to shave off a few lines of open-coded functions on client/server handling, from Geliang Tang. 13) Properly propagate prog->aux->tail_call_reachable out of BPF verifier, so that x86 JIT does not need to implement detection, from Leon Hwang. 14) Fix BPF verifier to add a missing check_func_arg_reg_off() to prevent an out-of-bounds memory access for dynpointers, from Matt Bobrowski. 15) Fix bpf_session_cookie() kfunc to return __u64 instead of long pointer as it might lead to problems on 32-bit archs, from Jiri Olsa. 16) Enhance traffic validation and dynamic batch size support in xsk selftests, from Tushar Vyavahare. bpf-next-for-netdev * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (102 commits) selftests/bpf: DENYLIST.aarch64: Remove fexit_sleep selftests/bpf: amend for wrong bpf_wq_set_callback_impl signature bpf: helpers: fix bpf_wq_set_callback_impl signature libbpf: Add NULL checks to bpf_object__{prev_map,next_map} selftests/bpf: Remove exceptions tests from DENYLIST.s390x s390/bpf: Implement exceptions s390/bpf: Change seen_reg to a mask bpf: Remove unnecessary loop in task_file_seq_get_next() riscv, bpf: Optimize stack usage of trampoline bpf, devmap: Add .map_alloc_check selftests/bpf: Remove arena tests from DENYLIST.s390x selftests/bpf: Add UAF tests for arena atomics selftests/bpf: Introduce __arena_global s390/bpf: Support arena atomics s390/bpf: Enable arena s390/bpf: Support address space cast instruction s390/bpf: Support BPF_PROBE_MEM32 s390/bpf: Land on the next JITed instruction after exception s390/bpf: Introduce pre- and post- probe functions s390/bpf: Get rid of get_probe_mem_regno() ... ==================== Link: https://patch.msgid.link/20240708221438.10974-1-daniel@iogearbox.net Signed-off-by: Paolo Abeni <pabeni@redhat.com> 
Daniel Borkmann says:

====================
pull-request: bpf-next 2024-07-08

The following pull-request contains BPF updates for your *net-next* tree.

We've added 102 non-merge commits during the last 28 day(s) which contain
a total of 127 files changed, 4606 insertions(+), 980 deletions(-).

The main changes are:

1) Support resilient split BTF which cuts down on duplication and makes BTF
   as compact as possible wrt BTF from modules, from Alan Maguire & Eduard Zingerman.

2) Add support for dumping kfunc prototypes from BTF which enables both detecting
   as well as dumping compilable prototypes for kfuncs, from Daniel Xu.

3) Batch of s390x BPF JIT improvements to add support for BPF arena and to implement
   support for BPF exceptions, from Ilya Leoshkevich.

4) Batch of riscv64 BPF JIT improvements in particular to add 12-argument support
   for BPF trampolines and to utilize bpf_prog_pack for the latter, from Pu Lehui.

5) Extend BPF test infrastructure to add a CHECKSUM_COMPLETE validation option
   for skbs and add coverage along with it, from Vadim Fedorenko.

6) Inline bpf_get_current_task/_btf() helpers in the arm64 BPF JIT which gives
   a small 1% performance improvement in micro-benchmarks, from Puranjay Mohan.

7) Extend the BPF verifier to track the delta between linked registers in order
   to better deal with recent LLVM code optimizations, from Alexei Starovoitov.

8) Fix bpf_wq_set_callback_impl() kfunc signature where the third argument should
   have been a pointer to the map value, from Benjamin Tissoires.

9) Extend BPF selftests to add regular expression support for test output matching
   and adjust some of the selftest when compiled under gcc, from Cupertino Miranda.

10) Simplify task_file_seq_get_next() and remove an unnecessary loop which always
    iterates exactly once anyway, from Dan Carpenter.

11) Add the capability to offload the netfilter flowtable in XDP layer through
    kfuncs, from Florian Westphal & Lorenzo Bianconi.

12) Various cleanups in networking helpers in BPF selftests to shave off a few
    lines of open-coded functions on client/server handling, from Geliang Tang.

13) Properly propagate prog->aux->tail_call_reachable out of BPF verifier, so
    that x86 JIT does not need to implement detection, from Leon Hwang.

14) Fix BPF verifier to add a missing check_func_arg_reg_off() to prevent an
    out-of-bounds memory access for dynpointers, from Matt Bobrowski.

15) Fix bpf_session_cookie() kfunc to return __u64 instead of long pointer as
    it might lead to problems on 32-bit archs, from Jiri Olsa.

16) Enhance traffic validation and dynamic batch size support in xsk selftests,
    from Tushar Vyavahare.

bpf-next-for-netdev

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (102 commits)
  selftests/bpf: DENYLIST.aarch64: Remove fexit_sleep
  selftests/bpf: amend for wrong bpf_wq_set_callback_impl signature
  bpf: helpers: fix bpf_wq_set_callback_impl signature
  libbpf: Add NULL checks to bpf_object__{prev_map,next_map}
  selftests/bpf: Remove exceptions tests from DENYLIST.s390x
  s390/bpf: Implement exceptions
  s390/bpf: Change seen_reg to a mask
  bpf: Remove unnecessary loop in task_file_seq_get_next()
  riscv, bpf: Optimize stack usage of trampoline
  bpf, devmap: Add .map_alloc_check
  selftests/bpf: Remove arena tests from DENYLIST.s390x
  selftests/bpf: Add UAF tests for arena atomics
  selftests/bpf: Introduce __arena_global
  s390/bpf: Support arena atomics
  s390/bpf: Enable arena
  s390/bpf: Support address space cast instruction
  s390/bpf: Support BPF_PROBE_MEM32
  s390/bpf: Land on the next JITed instruction after exception
  s390/bpf: Introduce pre- and post- probe functions
  s390/bpf: Get rid of get_probe_mem_regno()
  ...
====================

Link: https://patch.msgid.link/20240708221438.10974-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
netfilter: Add bpf_xdp_flow_lookup kfunc 2024-07-01T15:03:01+00:00 Lorenzo Bianconi lorenzo@kernel.org 2024-06-29T22:26:49+00:00 391bb6594fd3a567efb1cd3efc8136c78c4c9e31 Introduce bpf_xdp_flow_lookup kfunc in order to perform the lookup of a given flowtable entry based on a fib tuple of incoming traffic. bpf_xdp_flow_lookup can be used as building block to offload in xdp the processing of sw flowtable when hw flowtable is not available. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Link: https://lore.kernel.org/bpf/55d38a4e5856f6d1509d823ff4e98aaa6d356097.1719698275.git.lorenzo@kernel.org 
Introduce bpf_xdp_flow_lookup kfunc in order to perform the lookup
of a given flowtable entry based on a fib tuple of incoming traffic.
bpf_xdp_flow_lookup can be used as building block to offload in xdp
the processing of sw flowtable when hw flowtable is not available.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://lore.kernel.org/bpf/55d38a4e5856f6d1509d823ff4e98aaa6d356097.1719698275.git.lorenzo@kernel.org
netfilter: nf_tables: Add flowtable map for xdp offload 2024-07-01T15:01:53+00:00 Florian Westphal fw@strlen.de 2024-06-29T22:26:48+00:00 89cc8f1c5f22568142b7ad118c738204708e4207 This adds a small internal mapping table so that a new bpf (xdp) kfunc can perform lookups in a flowtable. As-is, xdp program has access to the device pointer, but no way to do a lookup in a flowtable -- there is no way to obtain the needed struct without questionable stunts. This allows to obtain an nf_flowtable pointer given a net_device structure. In order to keep backward compatibility, the infrastructure allows the user to add a given device to multiple flowtables, but it will always return the first added mapping performing the lookup since it assumes the right configuration is 1:1 mapping between flowtables and net_devices. Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Link: https://lore.kernel.org/bpf/9f20e2c36f494b3bf177328718367f636bb0b2ab.1719698275.git.lorenzo@kernel.org 
This adds a small internal mapping table so that a new bpf (xdp) kfunc
can perform lookups in a flowtable.

As-is, xdp program has access to the device pointer, but no way to do a
lookup in a flowtable -- there is no way to obtain the needed struct
without questionable stunts.

This allows to obtain an nf_flowtable pointer given a net_device
structure.

In order to keep backward compatibility, the infrastructure allows the
user to add a given device to multiple flowtables, but it will always
return the first added mapping performing the lookup since it assumes
the right configuration is 1:1 mapping between flowtables and net_devices.

Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://lore.kernel.org/bpf/9f20e2c36f494b3bf177328718367f636bb0b2ab.1719698275.git.lorenzo@kernel.org
Merge tag 'nf-next-24-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next into main 2024-07-01T08:52:35+00:00 David S. Miller davem@davemloft.net 2024-07-01T08:52:35+00:00 1c5fc27bc48a7f33302536c42184e5208ee66783 Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter/IPVS updates for net-next: Patch #1 to #11 to shrink memory consumption for transaction objects: struct nft_trans_chain { /* size: 120 (-32), cachelines: 2, members: 10 */ struct nft_trans_elem { /* size: 72 (-40), cachelines: 2, members: 4 */ struct nft_trans_flowtable { /* size: 80 (-48), cachelines: 2, members: 5 */ struct nft_trans_obj { /* size: 72 (-40), cachelines: 2, members: 4 */ struct nft_trans_rule { /* size: 80 (-32), cachelines: 2, members: 6 */ struct nft_trans_set { /* size: 96 (-24), cachelines: 2, members: 8 */ struct nft_trans_table { /* size: 56 (-40), cachelines: 1, members: 2 */ struct nft_trans_elem can now be allocated from kmalloc-96 instead of kmalloc-128 slab. Series from Florian Westphal. For the record, I have mangled patch #1 to add nft_trans_container_*() and use if for every transaction object. I have also added BUILD_BUG_ON to ensure struct nft_trans always comes at the beginning of the container transaction object. And few minor cleanups, any new bugs are of my own. Patch #12 simplify check for SCTP GSO in IPVS, from Ismael Luceno. Patch #13 nf_conncount key length remains in the u32 bound, from Yunjian Wang. Patch #14 removes unnecessary check for CTA_TIMEOUT_L3PROTO when setting default conntrack timeouts via nfnetlink_cttimeout API, from Lin Ma. Patch #15 updates NFT_SECMARK_CTX_MAXLEN to 4096, SELinux could use larger secctx names than the existing 256 bytes length. Patch #16 adds a selftest to exercise nfnetlink_queue listeners leaving nfnetlink_queue, from Florian Westphal. Patch #17 increases hitcount from 255 to 65535 in xt_recent, from Phil Sutter. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 
Pablo Neira Ayuso says:

====================
Netfilter/IPVS updates for net-next

The following patchset contains Netfilter/IPVS updates for net-next:

Patch #1 to #11 to shrink memory consumption for transaction objects:

  struct nft_trans_chain { /* size: 120 (-32), cachelines: 2, members: 10 */
  struct nft_trans_elem { /* size: 72 (-40), cachelines: 2, members: 4 */
  struct nft_trans_flowtable { /* size: 80 (-48), cachelines: 2, members: 5 */
  struct nft_trans_obj { /* size: 72 (-40), cachelines: 2, members: 4 */
  struct nft_trans_rule { /* size: 80 (-32), cachelines: 2, members: 6 */
  struct nft_trans_set { /* size: 96 (-24), cachelines: 2, members: 8 */
  struct nft_trans_table { /* size: 56 (-40), cachelines: 1, members: 2 */

  struct nft_trans_elem can now be allocated from kmalloc-96 instead of
  kmalloc-128 slab.

  Series from Florian Westphal. For the record, I have mangled patch #1
  to add nft_trans_container_*() and use if for every transaction object.
   I have also added BUILD_BUG_ON to ensure struct nft_trans always comes
  at the beginning of the container transaction object. And few minor
  cleanups, any new bugs are of my own.

Patch #12 simplify check for SCTP GSO in IPVS, from Ismael Luceno.

Patch #13 nf_conncount key length remains in the u32 bound, from Yunjian Wang.

Patch #14 removes unnecessary check for CTA_TIMEOUT_L3PROTO when setting
          default conntrack timeouts via nfnetlink_cttimeout API, from
          Lin Ma.

Patch #15 updates NFT_SECMARK_CTX_MAXLEN to 4096, SELinux could use
          larger secctx names than the existing 256 bytes length.

Patch #16 adds a selftest to exercise nfnetlink_queue listeners leaving
          nfnetlink_queue, from Florian Westphal.

Patch #17 increases hitcount from 255 to 65535 in xt_recent, from Phil Sutter.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
netfilter: nf_tables: fully validate NFT_DATA_VALUE on store to data registers 2024-06-26T23:09:51+00:00 Pablo Neira Ayuso pablo@netfilter.org 2024-06-26T21:15:38+00:00 7931d32955e09d0a11b1fe0b6aac1bfa061c005c register store validation for NFT_DATA_VALUE is conditional, however, the datatype is always either NFT_DATA_VALUE or NFT_DATA_VERDICT. This only requires a new helper function to infer the register type from the set datatype so this conditional check can be removed. Otherwise, pointer to chain object can be leaked through the registers. Fixes: 96518518cc41 ("netfilter: add nftables") Reported-by: Linus Torvalds <torvalds@linuxfoundation.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 
register store validation for NFT_DATA_VALUE is conditional, however,
the datatype is always either NFT_DATA_VALUE or NFT_DATA_VERDICT. This
only requires a new helper function to infer the register type from the
set datatype so this conditional check can be removed. Otherwise,
pointer to chain object can be leaked through the registers.

Fixes: 96518518cc41 ("netfilter: add nftables")
Reported-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
netfilter: nf_tables: do not store nft_ctx in transaction objects 2024-06-25T18:40:47+00:00 Florian Westphal fw@strlen.de 2024-05-13T13:00:51+00:00 e169285f8c56b8d5702475de0582dc83650c6cee nft_ctx is huge and most of the information stored within isn't used at all. Remove nft_ctx member from the base transaction structure and store only what is needed. After this change, relevant struct sizes are: struct nft_trans_chain { /* size: 120 (-32), cachelines: 2, members: 10 */ struct nft_trans_elem { /* size: 72 (-40), cachelines: 2, members: 4 */ struct nft_trans_flowtable { /* size: 80 (-48), cachelines: 2, members: 5 */ struct nft_trans_obj { /* size: 72 (-40), cachelines: 2, members: 4 */ struct nft_trans_rule { /* size: 80 (-32), cachelines: 2, members: 6 */ struct nft_trans_set { /* size: 96 (-24), cachelines: 2, members: 8 */ struct nft_trans_table { /* size: 56 (-40), cachelines: 1, members: 2 */ struct nft_trans_elem can now be allocated from kmalloc-96 instead of kmalloc-128 slab. A further reduction by 8 bytes would even allow for kmalloc-64. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 
nft_ctx is huge and most of the information stored within isn't used
at all.

Remove nft_ctx member from the base transaction structure and store
only what is needed.

After this change, relevant struct sizes are:

struct nft_trans_chain { /* size: 120 (-32), cachelines: 2, members: 10 */
struct nft_trans_elem { /* size: 72 (-40), cachelines: 2, members: 4 */
struct nft_trans_flowtable { /* size: 80 (-48), cachelines: 2, members: 5 */
struct nft_trans_obj { /* size: 72 (-40), cachelines: 2, members: 4 */
struct nft_trans_rule { /* size: 80 (-32), cachelines: 2, members: 6 */
struct nft_trans_set { /* size: 96 (-24), cachelines: 2, members: 8 */
struct nft_trans_table { /* size: 56 (-40), cachelines: 1, members: 2 */

struct nft_trans_elem can now be allocated from kmalloc-96 instead of
kmalloc-128 slab.
A further reduction by 8 bytes would even allow for kmalloc-64.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
netfilter: nf_tables: store chain pointer in rule transaction 2024-06-25T18:40:47+00:00 Florian Westphal fw@strlen.de 2024-06-24T18:57:03+00:00 13f20bc9ec4f9f25935bf52337d3d1708787bd55 Currently the chain can be derived from trans->ctx.chain, but the ctx will go away soon. Thus add the chain pointer to nft_trans_rule structure itself. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 
Currently the chain can be derived from trans->ctx.chain, but
the ctx will go away soon.

Thus add the chain pointer to nft_trans_rule structure itself.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>