linux-stable.git/include/net/bluetooth, branch v6.3.4

Bluetooth: Add new quirk for broken set random RPA timeout for ATS2851

2023-05-24T16:30:08+00:00

[ Upstream commit 91b6d02ddcd113352bdd895990b252065c596de7 ]

The ATS2851 based controller advertises support for command "LE Set Random
Private Address Timeout" but does not actually implement it, impeding the
controller initialization.

Add the quirk HCI_QUIRK_BROKEN_SET_RPA_TIMEOUT to unblock the controller
initialization.

< HCI Command: LE Set Resolvable Private... (0x08|0x002e) plen 2
        Timeout: 900 seconds
> HCI Event: Command Status (0x0f) plen 4
      LE Set Resolvable Private Address Timeout (0x08|0x002e) ncmd 1
        Status: Unknown HCI Command (0x01)

Co-developed-by: imoc 
Signed-off-by: imoc 
Signed-off-by: Raul Cheleguini 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Sasha Levin

Bluetooth: Add new quirk for broken local ext features page 2

2023-05-24T16:30:07+00:00

[ Upstream commit 8194f1ef5a815aea815a91daf2c721eab2674f1f ]

Some adapters (e.g. RTL8723CS) advertise that they have more than
2 pages for local ext features, but they don't support any features
declared in these pages. RTL8723CS reports max_page = 2 and declares
support for sync train and secure connection, but it responds with
either garbage or with error in status on corresponding commands.

Signed-off-by: Vasily Khoruzhick 
Signed-off-by: Bastian Germann 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Sasha Levin

Bluetooth: Fix printing errors if LE Connection times out

2023-04-10T17:21:33+00:00

This fixes errors like bellow when LE Connection times out since that
is actually not a controller error:

 Bluetooth: hci0: Opcode 0x200d failed: -110
 Bluetooth: hci0: request failed to create LE connection: err -110

Instead the code shall properly detect if -ETIMEDOUT is returned and
send HCI_OP_LE_CREATE_CONN_CANCEL to give up on the connection.

Link: https://github.com/bluez/bluez/issues/340
Fixes: 8e8b92ee60de ("Bluetooth: hci_sync: Add hci_le_create_conn_sync")
Signed-off-by: Luiz Augusto von Dentz

Bluetooth: btintel: Iterate only bluetooth device ACPI entries

2023-03-22T23:05:55+00:00

Current flow interates over entire ACPI table entries looking for
Bluetooth Per Platform Antenna Gain(PPAG) entry. This patch iterates
over ACPI entries relvant to Bluetooth device only.

Fixes: c585a92b2f9c ("Bluetooth: btintel: Set Per Platform Antenna Gain(PPAG)")
Signed-off-by: Kiran K 
Signed-off-by: Luiz Augusto von Dentz

Bluetooth: MGMT: add CIS feature bits to controller information

2023-02-09T22:18:27+00:00

Userspace needs to know whether the adapter has feature support for
Connected Isochronous Stream - Central/Peripheral, so it can set up
LE Audio features accordingly.

Expose these feature bits as settings in MGMT controller info.

Signed-off-by: Pauli Virtanen 
Signed-off-by: Luiz Augusto von Dentz

Bluetooth: HCI: Replace zero-length arrays with flexible-array members

2023-02-09T22:17:40+00:00

Zero-length arrays are deprecated[1] and we are moving towards
adopting C99 flexible-array members instead. So, replace zero-length
arrays in a couple of structures with flex-array members.

This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [2].

Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays [1]
Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [2]
Link: https://github.com/KSPP/linux/issues/78
Signed-off-by: Gustavo A. R. Silva 
Signed-off-by: Luiz Augusto von Dentz

Bluetooth: Add quirk to disable MWS Transport Configuration

2022-12-12T22:19:24+00:00

Broadcom 4378/4387 controllers found in Apple Silicon Macs claim to
support getting MWS Transport Layer Configuration,

< HCI Command: Read Local Supported... (0x04|0x0002) plen 0
> HCI Event: Command Complete (0x0e) plen 68
      Read Local Supported Commands (0x04|0x0002) ncmd 1
        Status: Success (0x00)
[...]
          Get MWS Transport Layer Configuration (Octet 30 - Bit 3)]
[...]

, but then don't actually allow the required command:

> HCI Event: Command Complete (0x0e) plen 15
      Get MWS Transport Layer Configuration (0x05|0x000c) ncmd 1
        Status: Command Disallowed (0x0c)
        Number of transports: 0
        Baud rate list: 0 entries
        00 00 00 00 00 00 00 00 00 00

Signed-off-by: Sven Peter 
Signed-off-by: Luiz Augusto von Dentz

Bluetooth: Add quirk to disable extended scanning

2022-12-12T22:19:24+00:00

Broadcom 4377 controllers found in Apple x86 Macs with the T2 chip
claim to support extended scanning when querying supported states,

< HCI Command: LE Read Supported St.. (0x08|0x001c) plen 0
> HCI Event: Command Complete (0x0e) plen 12
      LE Read Supported States (0x08|0x001c) ncmd 1
        Status: Success (0x00)
        States: 0x000003ffffffffff
[...]
          LE Set Extended Scan Parameters (Octet 37 - Bit 5)
          LE Set Extended Scan Enable (Octet 37 - Bit 6)
[...]

, but then fail to actually implement the extended scanning:

< HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8
        Own address type: Random (0x01)
        Filter policy: Accept all advertisement (0x00)
        PHYs: 0x01
        Entry 0: LE 1M
          Type: Active (0x01)
          Interval: 11.250 msec (0x0012)
          Window: 11.250 msec (0x0012)
> HCI Event: Command Complete (0x0e) plen 4
      LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1
        Status: Unknown HCI Command (0x01)

Signed-off-by: Sven Peter 
Signed-off-by: Luiz Augusto von Dentz

Bluetooth: hci_event: Ignore reserved bits in LE Extended Adv Report

2022-12-12T22:19:24+00:00

Broadcom controllers present on Apple Silicon devices use the upper
8 bits of the event type in the LE Extended Advertising Report for
the channel on which the frame has been received.
These bits are reserved according to the Bluetooth spec anyway such that
we can just drop them to ensure that the advertising results are parsed
correctly.

The following excerpt from a btmon trace shows a report received on
channel 37 by these controllers:

> HCI Event: LE Meta Event (0x3e) plen 55
      LE Extended Advertising Report (0x0d)
        Num reports: 1
        Entry 0
          Event type: 0x2513
            Props: 0x0013
              Connectable
              Scannable
              Use legacy advertising PDUs
            Data status: Complete
            Reserved (0x2500)
          Legacy PDU Type: Reserved (0x2513)
          Address type: Public (0x00)
          Address: XX:XX:XX:XX:XX:XX (Shenzhen Jingxun Software [...])
          Primary PHY: LE 1M
          Secondary PHY: No packets
          SID: no ADI field (0xff)
          TX power: 127 dBm
          RSSI: -76 dBm (0xb4)
          Periodic advertising interval: 0.00 msec (0x0000)
          Direct address type: Public (0x00)
          Direct address: 00:00:00:00:00:00 (OUI 00-00-00)
          Data length: 0x1d
          [...]
        Flags: 0x18
          Simultaneous LE and BR/EDR (Controller)
          Simultaneous LE and BR/EDR (Host)
        Company: Harman International Industries, Inc. (87)
          Data: [...]
        Service Data (UUID 0xfddf):
        Name (complete): JBL Flip 5

Signed-off-by: Sven Peter 
Signed-off-by: Luiz Augusto von Dentz

Bluetooth: btusb: Introduce generic USB reset

2022-12-12T22:19:23+00:00

On cmd_timeout with no reset_gpio, reset the USB port as a last
resort.

This patch changes the behavior of btusb_intel_cmd_timeout and
btusb_rtl_cmd_timeout.

Signed-off-by: Archie Pusaka 
Reviewed-by: Abhishek Pandit-Subedi 
Reviewed-by: Ying Hsu 
Signed-off-by: Luiz Augusto von Dentz