<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/include/net/bluetooth, branch v5.15.208</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>Bluetooth: L2CAP: Fix invalid response to L2CAP_ECRED_RECONF_REQ</title>
<updated>2026-03-04T12:20:22+00:00</updated>
<author>
<name>Luiz Augusto von Dentz</name>
<email>luiz.von.dentz@intel.com</email>
</author>
<published>2026-02-03T20:16:16+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=a5fbbfa7cf2147559625f56e3e5892ddc740c931'/>
<id>a5fbbfa7cf2147559625f56e3e5892ddc740c931</id>
<content type='text'>
[ Upstream commit 7accb1c4321acb617faf934af59d928b0b047e2b ]

This fixes responding with an invalid result caused by checking the
wrong size of CID which should have been (cmd_len - sizeof(*req)) and
on top of it the wrong result was use L2CAP_CR_LE_INVALID_PARAMS which
is invalid/reserved for reconf when running test like L2CAP/ECFC/BI-03-C:

&gt; ACL Data RX: Handle 64 flags 0x02 dlen 14
      LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 6
        MTU: 64
        MPS: 64
        Source CID: 64
&lt; ACL Data TX: Handle 64 flags 0x00 dlen 10
      LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
!        Result: Reserved (0x000c)
         Result: Reconfiguration failed - one or more Destination CIDs invalid (0x0003)

Fiix L2CAP/ECFC/BI-04-C which expects L2CAP_RECONF_INVALID_MPS (0x0002)
when more than one channel gets its MPS reduced:

&gt; ACL Data RX: Handle 64 flags 0x02 dlen 16
      LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 8
        MTU: 264
        MPS: 99
        Source CID: 64
!       Source CID: 65
&lt; ACL Data TX: Handle 64 flags 0x00 dlen 10
      LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
!        Result: Reconfiguration successful (0x0000)
         Result: Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time (0x0002)

Fix L2CAP/ECFC/BI-05-C when SCID is invalid (85 unconnected):

&gt; ACL Data RX: Handle 64 flags 0x02 dlen 14
      LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 6
        MTU: 65
        MPS: 64
!        Source CID: 85
&lt; ACL Data TX: Handle 64 flags 0x00 dlen 10
      LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
!        Result: Reconfiguration successful (0x0000)
         Result: Reconfiguration failed - one or more Destination CIDs invalid (0x0003)

Fix L2CAP/ECFC/BI-06-C when MPS &lt; L2CAP_ECRED_MIN_MPS (64):

&gt; ACL Data RX: Handle 64 flags 0x02 dlen 14
      LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 6
        MTU: 672
!       MPS: 63
        Source CID: 64
&lt; ACL Data TX: Handle 64 flags 0x00 dlen 10
      LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
!       Result: Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time (0x0002)
        Result: Reconfiguration failed - other unacceptable parameters (0x0004)

Fix L2CAP/ECFC/BI-07-C when MPS reduced for more than one channel:

&gt; ACL Data RX: Handle 64 flags 0x02 dlen 16
      LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 3 len 8
        MTU: 84
!       MPS: 71
        Source CID: 64
!        Source CID: 65
&lt; ACL Data TX: Handle 64 flags 0x00 dlen 10
      LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
!       Result: Reconfiguration successful (0x0000)
        Result: Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time (0x0002)

Link: https://github.com/bluez/bluez/issues/1865
Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Signed-off-by: Luiz Augusto von Dentz &lt;luiz.von.dentz@intel.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 7accb1c4321acb617faf934af59d928b0b047e2b ]

This fixes responding with an invalid result caused by checking the
wrong size of CID which should have been (cmd_len - sizeof(*req)) and
on top of it the wrong result was use L2CAP_CR_LE_INVALID_PARAMS which
is invalid/reserved for reconf when running test like L2CAP/ECFC/BI-03-C:

&gt; ACL Data RX: Handle 64 flags 0x02 dlen 14
      LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 6
        MTU: 64
        MPS: 64
        Source CID: 64
&lt; ACL Data TX: Handle 64 flags 0x00 dlen 10
      LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
!        Result: Reserved (0x000c)
         Result: Reconfiguration failed - one or more Destination CIDs invalid (0x0003)

Fiix L2CAP/ECFC/BI-04-C which expects L2CAP_RECONF_INVALID_MPS (0x0002)
when more than one channel gets its MPS reduced:

&gt; ACL Data RX: Handle 64 flags 0x02 dlen 16
      LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 8
        MTU: 264
        MPS: 99
        Source CID: 64
!       Source CID: 65
&lt; ACL Data TX: Handle 64 flags 0x00 dlen 10
      LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
!        Result: Reconfiguration successful (0x0000)
         Result: Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time (0x0002)

Fix L2CAP/ECFC/BI-05-C when SCID is invalid (85 unconnected):

&gt; ACL Data RX: Handle 64 flags 0x02 dlen 14
      LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 6
        MTU: 65
        MPS: 64
!        Source CID: 85
&lt; ACL Data TX: Handle 64 flags 0x00 dlen 10
      LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
!        Result: Reconfiguration successful (0x0000)
         Result: Reconfiguration failed - one or more Destination CIDs invalid (0x0003)

Fix L2CAP/ECFC/BI-06-C when MPS &lt; L2CAP_ECRED_MIN_MPS (64):

&gt; ACL Data RX: Handle 64 flags 0x02 dlen 14
      LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 6
        MTU: 672
!       MPS: 63
        Source CID: 64
&lt; ACL Data TX: Handle 64 flags 0x00 dlen 10
      LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
!       Result: Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time (0x0002)
        Result: Reconfiguration failed - other unacceptable parameters (0x0004)

Fix L2CAP/ECFC/BI-07-C when MPS reduced for more than one channel:

&gt; ACL Data RX: Handle 64 flags 0x02 dlen 16
      LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 3 len 8
        MTU: 84
!       MPS: 71
        Source CID: 64
!        Source CID: 65
&lt; ACL Data TX: Handle 64 flags 0x00 dlen 10
      LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
!       Result: Reconfiguration successful (0x0000)
        Result: Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time (0x0002)

Link: https://github.com/bluez/bluez/issues/1865
Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Signed-off-by: Luiz Augusto von Dentz &lt;luiz.von.dentz@intel.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Bluetooth: SCO: Fix UAF on sco_sock_timeout</title>
<updated>2025-05-02T05:44:25+00:00</updated>
<author>
<name>Luiz Augusto von Dentz</name>
<email>luiz.von.dentz@intel.com</email>
</author>
<published>2024-10-22T16:31:08+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=74a466a15731a754bcd8b5a83c126b5122e15a45'/>
<id>74a466a15731a754bcd8b5a83c126b5122e15a45</id>
<content type='text'>
commit 1bf4470a3939c678fb822073e9ea77a0560bc6bb upstream.

conn-&gt;sk maybe have been unlinked/freed while waiting for sco_conn_lock
so this checks if the conn-&gt;sk is still valid by checking if it part of
sco_sk_list.

Reported-by: syzbot+4c0d0c4cde787116d465@syzkaller.appspotmail.com
Tested-by: syzbot+4c0d0c4cde787116d465@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=4c0d0c4cde787116d465
Fixes: ba316be1b6a0 ("Bluetooth: schedule SCO timeouts with delayed_work")
Signed-off-by: Luiz Augusto von Dentz &lt;luiz.von.dentz@intel.com&gt;
Signed-off-by: Xiangyu Chen &lt;xiangyu.chen@windriver.com&gt;
Signed-off-by: He Zhe &lt;zhe.he@windriver.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 1bf4470a3939c678fb822073e9ea77a0560bc6bb upstream.

conn-&gt;sk maybe have been unlinked/freed while waiting for sco_conn_lock
so this checks if the conn-&gt;sk is still valid by checking if it part of
sco_sk_list.

Reported-by: syzbot+4c0d0c4cde787116d465@syzkaller.appspotmail.com
Tested-by: syzbot+4c0d0c4cde787116d465@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=4c0d0c4cde787116d465
Fixes: ba316be1b6a0 ("Bluetooth: schedule SCO timeouts with delayed_work")
Signed-off-by: Luiz Augusto von Dentz &lt;luiz.von.dentz@intel.com&gt;
Signed-off-by: Xiangyu Chen &lt;xiangyu.chen@windriver.com&gt;
Signed-off-by: He Zhe &lt;zhe.he@windriver.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Bluetooth: SCO: Fix not validating setsockopt user input</title>
<updated>2025-02-01T17:24:01+00:00</updated>
<author>
<name>Luiz Augusto von Dentz</name>
<email>luiz.von.dentz@intel.com</email>
</author>
<published>2024-04-05T19:41:52+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=2c2dc87cdebef3fe3b9d7a711a984c70e376e32e'/>
<id>2c2dc87cdebef3fe3b9d7a711a984c70e376e32e</id>
<content type='text'>
commit 51eda36d33e43201e7a4fd35232e069b2c850b01 upstream.

syzbot reported sco_sock_setsockopt() is copying data without
checking user input length.

BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset
include/linux/sockptr.h:49 [inline]
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr
include/linux/sockptr.h:55 [inline]
BUG: KASAN: slab-out-of-bounds in sco_sock_setsockopt+0xc0b/0xf90
net/bluetooth/sco.c:893
Read of size 4 at addr ffff88805f7b15a3 by task syz-executor.5/12578

Fixes: ad10b1a48754 ("Bluetooth: Add Bluetooth socket voice option")
Fixes: b96e9c671b05 ("Bluetooth: Add BT_DEFER_SETUP option to sco socket")
Fixes: 00398e1d5183 ("Bluetooth: Add support for BT_PKT_STATUS CMSG data for SCO connections")
Fixes: f6873401a608 ("Bluetooth: Allow setting of codec for HFP offload use case")
Reported-by: syzbot &lt;syzkaller@googlegroups.com&gt;
Signed-off-by: Eric Dumazet &lt;edumazet@google.com&gt;
Signed-off-by: Luiz Augusto von Dentz &lt;luiz.von.dentz@intel.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
Signed-off-by: Keerthana K &lt;keerthana.kalyanasundaram@broadcom.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 51eda36d33e43201e7a4fd35232e069b2c850b01 upstream.

syzbot reported sco_sock_setsockopt() is copying data without
checking user input length.

BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset
include/linux/sockptr.h:49 [inline]
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr
include/linux/sockptr.h:55 [inline]
BUG: KASAN: slab-out-of-bounds in sco_sock_setsockopt+0xc0b/0xf90
net/bluetooth/sco.c:893
Read of size 4 at addr ffff88805f7b15a3 by task syz-executor.5/12578

Fixes: ad10b1a48754 ("Bluetooth: Add Bluetooth socket voice option")
Fixes: b96e9c671b05 ("Bluetooth: Add BT_DEFER_SETUP option to sco socket")
Fixes: 00398e1d5183 ("Bluetooth: Add support for BT_PKT_STATUS CMSG data for SCO connections")
Fixes: f6873401a608 ("Bluetooth: Allow setting of codec for HFP offload use case")
Reported-by: syzbot &lt;syzkaller@googlegroups.com&gt;
Signed-off-by: Eric Dumazet &lt;edumazet@google.com&gt;
Signed-off-by: Luiz Augusto von Dentz &lt;luiz.von.dentz@intel.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
Signed-off-by: Keerthana K &lt;keerthana.kalyanasundaram@broadcom.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Revert "Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE"</title>
<updated>2024-09-12T09:07:43+00:00</updated>
<author>
<name>Luiz Augusto von Dentz</name>
<email>luiz.von.dentz@intel.com</email>
</author>
<published>2024-08-27T18:37:22+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=d98304eaacc649f6cee9fd68c7a7f07d0a345c02'/>
<id>d98304eaacc649f6cee9fd68c7a7f07d0a345c02</id>
<content type='text'>
commit 532f8bcd1c2c4e8112f62e1922fd1703bc0ffce0 upstream.

This reverts commit 59b047bc98084f8af2c41483e4d68a5adf2fa7f7 which
breaks compatibility with commands like:

bluetoothd[46328]: @ MGMT Command: Load.. (0x0013) plen 74  {0x0001} [hci0]
        Keys: 2
        BR/EDR Address: C0:DC:DA:A5:E5:47 (Samsung Electronics Co.,Ltd)
        Key type: Authenticated key from P-256 (0x03)
        Central: 0x00
        Encryption size: 16
        Diversifier[2]: 0000
        Randomizer[8]: 0000000000000000
        Key[16]: 6ed96089bd9765be2f2c971b0b95f624
        LE Address: D7:2A:DE:1E:73:A2 (Static)
        Key type: Unauthenticated key from P-256 (0x02)
        Central: 0x00
        Encryption size: 16
        Diversifier[2]: 0000
        Randomizer[8]: 0000000000000000
        Key[16]: 87dd2546ededda380ffcdc0a8faa4597
@ MGMT Event: Command Status (0x0002) plen 3                {0x0001} [hci0]
      Load Long Term Keys (0x0013)
        Status: Invalid Parameters (0x0d)

Cc: stable@vger.kernel.org
Link: https://github.com/bluez/bluez/issues/875
Fixes: 59b047bc9808 ("Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE")
Signed-off-by: Luiz Augusto von Dentz &lt;luiz.von.dentz@intel.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 532f8bcd1c2c4e8112f62e1922fd1703bc0ffce0 upstream.

This reverts commit 59b047bc98084f8af2c41483e4d68a5adf2fa7f7 which
breaks compatibility with commands like:

bluetoothd[46328]: @ MGMT Command: Load.. (0x0013) plen 74  {0x0001} [hci0]
        Keys: 2
        BR/EDR Address: C0:DC:DA:A5:E5:47 (Samsung Electronics Co.,Ltd)
        Key type: Authenticated key from P-256 (0x03)
        Central: 0x00
        Encryption size: 16
        Diversifier[2]: 0000
        Randomizer[8]: 0000000000000000
        Key[16]: 6ed96089bd9765be2f2c971b0b95f624
        LE Address: D7:2A:DE:1E:73:A2 (Static)
        Key type: Unauthenticated key from P-256 (0x02)
        Central: 0x00
        Encryption size: 16
        Diversifier[2]: 0000
        Randomizer[8]: 0000000000000000
        Key[16]: 87dd2546ededda380ffcdc0a8faa4597
@ MGMT Event: Command Status (0x0002) plen 3                {0x0001} [hci0]
      Load Long Term Keys (0x0013)
        Status: Invalid Parameters (0x0d)

Cc: stable@vger.kernel.org
Link: https://github.com/bluez/bluez/issues/875
Fixes: 59b047bc9808 ("Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE")
Signed-off-by: Luiz Augusto von Dentz &lt;luiz.von.dentz@intel.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Bluetooth: L2CAP: Fix rejecting L2CAP_CONN_PARAM_UPDATE_REQ</title>
<updated>2024-07-05T07:14:18+00:00</updated>
<author>
<name>Luiz Augusto von Dentz</name>
<email>luiz.von.dentz@intel.com</email>
</author>
<published>2024-05-20T20:03:07+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=3c2a6dd631062904e3d9b1954656676356f617a4'/>
<id>3c2a6dd631062904e3d9b1954656676356f617a4</id>
<content type='text'>
[ Upstream commit 806a5198c05987b748b50f3d0c0cfb3d417381a4 ]

This removes the bogus check for max &gt; hcon-&gt;le_conn_max_interval since
the later is just the initial maximum conn interval not the maximum the
stack could support which is really 3200=4000ms.

In order to pass GAP/CONN/CPUP/BV-05-C one shall probably enter values
of the following fields in IXIT that would cause hci_check_conn_params
to fail:

TSPX_conn_update_int_min
TSPX_conn_update_int_max
TSPX_conn_update_peripheral_latency
TSPX_conn_update_supervision_timeout

Link: https://github.com/bluez/bluez/issues/847
Fixes: e4b019515f95 ("Bluetooth: Enforce validation on max value of connection interval")
Signed-off-by: Luiz Augusto von Dentz &lt;luiz.von.dentz@intel.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 806a5198c05987b748b50f3d0c0cfb3d417381a4 ]

This removes the bogus check for max &gt; hcon-&gt;le_conn_max_interval since
the later is just the initial maximum conn interval not the maximum the
stack could support which is really 3200=4000ms.

In order to pass GAP/CONN/CPUP/BV-05-C one shall probably enter values
of the following fields in IXIT that would cause hci_check_conn_params
to fail:

TSPX_conn_update_int_min
TSPX_conn_update_int_max
TSPX_conn_update_peripheral_latency
TSPX_conn_update_supervision_timeout

Link: https://github.com/bluez/bluez/issues/847
Fixes: e4b019515f95 ("Bluetooth: Enforce validation on max value of connection interval")
Signed-off-by: Luiz Augusto von Dentz &lt;luiz.von.dentz@intel.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Bluetooth: Fix bogus check for re-auth no supported with non-ssp</title>
<updated>2024-01-25T22:52:40+00:00</updated>
<author>
<name>Luiz Augusto von Dentz</name>
<email>luiz.von.dentz@intel.com</email>
</author>
<published>2023-11-30T13:58:03+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=cede5d0c295714e371932c8ab1f21f5bf2a1ea1d'/>
<id>cede5d0c295714e371932c8ab1f21f5bf2a1ea1d</id>
<content type='text'>
[ Upstream commit d03376c185926098cb4d668d6458801eb785c0a5 ]

This reverts 19f8def031bfa50c579149b200bfeeb919727b27
"Bluetooth: Fix auth_complete_evt for legacy units" which seems to be
working around a bug on a broken controller rather then any limitation
imposed by the Bluetooth spec, in fact if there ws not possible to
re-auth the command shall fail not succeed.

Fixes: 19f8def031bf ("Bluetooth: Fix auth_complete_evt for legacy units")
Signed-off-by: Luiz Augusto von Dentz &lt;luiz.von.dentz@intel.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit d03376c185926098cb4d668d6458801eb785c0a5 ]

This reverts 19f8def031bfa50c579149b200bfeeb919727b27
"Bluetooth: Fix auth_complete_evt for legacy units" which seems to be
working around a bug on a broken controller rather then any limitation
imposed by the Bluetooth spec, in fact if there ws not possible to
re-auth the command shall fail not succeed.

Fixes: 19f8def031bf ("Bluetooth: Fix auth_complete_evt for legacy units")
Signed-off-by: Luiz Augusto von Dentz &lt;luiz.von.dentz@intel.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE</title>
<updated>2024-01-05T14:13:34+00:00</updated>
<author>
<name>Xiao Yao</name>
<email>xiaoyao@rock-chips.com</email>
</author>
<published>2023-12-11T16:27:18+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=a346cfc6389ac36051292b20b91980e6fcc4aa51'/>
<id>a346cfc6389ac36051292b20b91980e6fcc4aa51</id>
<content type='text'>
commit 59b047bc98084f8af2c41483e4d68a5adf2fa7f7 upstream.

If two Bluetooth devices both support BR/EDR and BLE, and also
support Secure Connections, then they only need to pair once.
The LTK generated during the LE pairing process may be converted
into a BR/EDR link key for BR/EDR transport, and conversely, a
link key generated during the BR/EDR SSP pairing process can be
converted into an LTK for LE transport. Hence, the link type of
the link key and LTK is not fixed, they can be either an LE LINK
or an ACL LINK.

Currently, in the mgmt_new_irk/ltk/crsk/link_key functions, the
link type is fixed, which could lead to incorrect address types
being reported to the application layer. Therefore, it is necessary
to add link_type/addr_type to the smp_irk/ltk/crsk and link_key,
to ensure the generation of the correct address type.

SMP over BREDR:
Before Fix:
&gt; ACL Data RX: Handle 11 flags 0x02 dlen 12
        BR/EDR SMP: Identity Address Information (0x09) len 7
        Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
        Random address: 00:00:00:00:00:00 (Non-Resolvable)
        LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
        LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
        Key type: Authenticated key from P-256 (0x03)

After Fix:
&gt; ACL Data RX: Handle 11 flags 0x02 dlen 12
      BR/EDR SMP: Identity Address Information (0x09) len 7
        Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
        Random address: 00:00:00:00:00:00 (Non-Resolvable)
        BR/EDR Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
        BR/EDR Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
        Key type: Authenticated key from P-256 (0x03)

SMP over LE:
Before Fix:
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
        Random address: 5F:5C:07:37:47:D5 (Resolvable)
        LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
        LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
        Key type: Authenticated key from P-256 (0x03)
@ MGMT Event: New Link Key (0x0009) plen 26
        BR/EDR Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
        Key type: Authenticated Combination key from P-256 (0x08)

After Fix:
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
        Random address: 5E:03:1C:00:38:21 (Resolvable)
        LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
        LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
        Key type: Authenticated key from P-256 (0x03)
@ MGMT Event: New Link Key (0x0009) plen 26
        Store hint: Yes (0x01)
        LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
        Key type: Authenticated Combination key from P-256 (0x08)

Cc: stable@vger.kernel.org
Signed-off-by: Xiao Yao &lt;xiaoyao@rock-chips.com&gt;
Signed-off-by: Luiz Augusto von Dentz &lt;luiz.von.dentz@intel.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 59b047bc98084f8af2c41483e4d68a5adf2fa7f7 upstream.

If two Bluetooth devices both support BR/EDR and BLE, and also
support Secure Connections, then they only need to pair once.
The LTK generated during the LE pairing process may be converted
into a BR/EDR link key for BR/EDR transport, and conversely, a
link key generated during the BR/EDR SSP pairing process can be
converted into an LTK for LE transport. Hence, the link type of
the link key and LTK is not fixed, they can be either an LE LINK
or an ACL LINK.

Currently, in the mgmt_new_irk/ltk/crsk/link_key functions, the
link type is fixed, which could lead to incorrect address types
being reported to the application layer. Therefore, it is necessary
to add link_type/addr_type to the smp_irk/ltk/crsk and link_key,
to ensure the generation of the correct address type.

SMP over BREDR:
Before Fix:
&gt; ACL Data RX: Handle 11 flags 0x02 dlen 12
        BR/EDR SMP: Identity Address Information (0x09) len 7
        Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
        Random address: 00:00:00:00:00:00 (Non-Resolvable)
        LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
        LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
        Key type: Authenticated key from P-256 (0x03)

After Fix:
&gt; ACL Data RX: Handle 11 flags 0x02 dlen 12
      BR/EDR SMP: Identity Address Information (0x09) len 7
        Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
        Random address: 00:00:00:00:00:00 (Non-Resolvable)
        BR/EDR Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
        BR/EDR Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
        Key type: Authenticated key from P-256 (0x03)

SMP over LE:
Before Fix:
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
        Random address: 5F:5C:07:37:47:D5 (Resolvable)
        LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
        LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
        Key type: Authenticated key from P-256 (0x03)
@ MGMT Event: New Link Key (0x0009) plen 26
        BR/EDR Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
        Key type: Authenticated Combination key from P-256 (0x08)

After Fix:
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
        Random address: 5E:03:1C:00:38:21 (Resolvable)
        LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
        LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
        Key type: Authenticated key from P-256 (0x03)
@ MGMT Event: New Link Key (0x0009) plen 26
        Store hint: Yes (0x01)
        LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
        Key type: Authenticated Combination key from P-256 (0x08)

Cc: stable@vger.kernel.org
Signed-off-by: Xiao Yao &lt;xiaoyao@rock-chips.com&gt;
Signed-off-by: Luiz Augusto von Dentz &lt;luiz.von.dentz@intel.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Bluetooth: hci_sock: Correctly bounds check and pad HCI_MON_NEW_INDEX name</title>
<updated>2023-10-25T09:59:04+00:00</updated>
<author>
<name>Kees Cook</name>
<email>keescook@chromium.org</email>
</author>
<published>2023-10-11T16:31:44+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=5a9d05a4f1c3f2fdd6719c26e8da68f98a8d8450'/>
<id>5a9d05a4f1c3f2fdd6719c26e8da68f98a8d8450</id>
<content type='text'>
commit cb3871b1cd135a6662b732fbc6b3db4afcdb4a64 upstream.

The code pattern of memcpy(dst, src, strlen(src)) is almost always
wrong. In this case it is wrong because it leaves memory uninitialized
if it is less than sizeof(ni-&gt;name), and overflows ni-&gt;name when longer.

Normally strtomem_pad() could be used here, but since ni-&gt;name is a
trailing array in struct hci_mon_new_index, compilers that don't support
-fstrict-flex-arrays=3 can't tell how large this array is via
__builtin_object_size(). Instead, open-code the helper and use sizeof()
since it will work correctly.

Additionally mark ni-&gt;name as __nonstring since it appears to not be a
%NUL terminated C string.

Cc: Luiz Augusto von Dentz &lt;luiz.von.dentz@intel.com&gt;
Cc: Edward AD &lt;twuufnxlz@gmail.com&gt;
Cc: Marcel Holtmann &lt;marcel@holtmann.org&gt;
Cc: Johan Hedberg &lt;johan.hedberg@gmail.com&gt;
Cc: "David S. Miller" &lt;davem@davemloft.net&gt;
Cc: Eric Dumazet &lt;edumazet@google.com&gt;
Cc: Jakub Kicinski &lt;kuba@kernel.org&gt;
Cc: Paolo Abeni &lt;pabeni@redhat.com&gt;
Cc: linux-bluetooth@vger.kernel.org
Cc: netdev@vger.kernel.org
Fixes: 18f547f3fc07 ("Bluetooth: hci_sock: fix slab oob read in create_monitor_event")
Link: https://lore.kernel.org/lkml/202310110908.F2639D3276@keescook/
Signed-off-by: Kees Cook &lt;keescook@chromium.org&gt;
Signed-off-by: Luiz Augusto von Dentz &lt;luiz.von.dentz@intel.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit cb3871b1cd135a6662b732fbc6b3db4afcdb4a64 upstream.

The code pattern of memcpy(dst, src, strlen(src)) is almost always
wrong. In this case it is wrong because it leaves memory uninitialized
if it is less than sizeof(ni-&gt;name), and overflows ni-&gt;name when longer.

Normally strtomem_pad() could be used here, but since ni-&gt;name is a
trailing array in struct hci_mon_new_index, compilers that don't support
-fstrict-flex-arrays=3 can't tell how large this array is via
__builtin_object_size(). Instead, open-code the helper and use sizeof()
since it will work correctly.

Additionally mark ni-&gt;name as __nonstring since it appears to not be a
%NUL terminated C string.

Cc: Luiz Augusto von Dentz &lt;luiz.von.dentz@intel.com&gt;
Cc: Edward AD &lt;twuufnxlz@gmail.com&gt;
Cc: Marcel Holtmann &lt;marcel@holtmann.org&gt;
Cc: Johan Hedberg &lt;johan.hedberg@gmail.com&gt;
Cc: "David S. Miller" &lt;davem@davemloft.net&gt;
Cc: Eric Dumazet &lt;edumazet@google.com&gt;
Cc: Jakub Kicinski &lt;kuba@kernel.org&gt;
Cc: Paolo Abeni &lt;pabeni@redhat.com&gt;
Cc: linux-bluetooth@vger.kernel.org
Cc: netdev@vger.kernel.org
Fixes: 18f547f3fc07 ("Bluetooth: hci_sock: fix slab oob read in create_monitor_event")
Link: https://lore.kernel.org/lkml/202310110908.F2639D3276@keescook/
Signed-off-by: Kees Cook &lt;keescook@chromium.org&gt;
Signed-off-by: Luiz Augusto von Dentz &lt;luiz.von.dentz@intel.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Bluetooth: hci_core: Fix build warnings</title>
<updated>2023-10-25T09:59:00+00:00</updated>
<author>
<name>Luiz Augusto von Dentz</name>
<email>luiz.von.dentz@intel.com</email>
</author>
<published>2023-09-15T21:42:27+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=bbec1724519ecd9c468d1186a8f30b7567175bfb'/>
<id>bbec1724519ecd9c468d1186a8f30b7567175bfb</id>
<content type='text'>
[ Upstream commit dcda165706b9fbfd685898d46a6749d7d397e0c0 ]

This fixes the following warnings:

net/bluetooth/hci_core.c: In function ‘hci_register_dev’:
net/bluetooth/hci_core.c:2620:54: warning: ‘%d’ directive output may
be truncated writing between 1 and 10 bytes into a region of size 5
[-Wformat-truncation=]
 2620 |         snprintf(hdev-&gt;name, sizeof(hdev-&gt;name), "hci%d", id);
      |                                                      ^~
net/bluetooth/hci_core.c:2620:50: note: directive argument in the range
[0, 2147483647]
 2620 |         snprintf(hdev-&gt;name, sizeof(hdev-&gt;name), "hci%d", id);
      |                                                  ^~~~~~~
net/bluetooth/hci_core.c:2620:9: note: ‘snprintf’ output between 5 and
14 bytes into a destination of size 8
 2620 |         snprintf(hdev-&gt;name, sizeof(hdev-&gt;name), "hci%d", id);
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Luiz Augusto von Dentz &lt;luiz.von.dentz@intel.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit dcda165706b9fbfd685898d46a6749d7d397e0c0 ]

This fixes the following warnings:

net/bluetooth/hci_core.c: In function ‘hci_register_dev’:
net/bluetooth/hci_core.c:2620:54: warning: ‘%d’ directive output may
be truncated writing between 1 and 10 bytes into a region of size 5
[-Wformat-truncation=]
 2620 |         snprintf(hdev-&gt;name, sizeof(hdev-&gt;name), "hci%d", id);
      |                                                      ^~
net/bluetooth/hci_core.c:2620:50: note: directive argument in the range
[0, 2147483647]
 2620 |         snprintf(hdev-&gt;name, sizeof(hdev-&gt;name), "hci%d", id);
      |                                                  ^~~~~~~
net/bluetooth/hci_core.c:2620:9: note: ‘snprintf’ output between 5 and
14 bytes into a destination of size 8
 2620 |         snprintf(hdev-&gt;name, sizeof(hdev-&gt;name), "hci%d", id);
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Luiz Augusto von Dentz &lt;luiz.von.dentz@intel.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Bluetooth: L2CAP: Fix use-after-free caused by l2cap_chan_put</title>
<updated>2022-08-03T10:03:40+00:00</updated>
<author>
<name>Luiz Augusto von Dentz</name>
<email>luiz.von.dentz@intel.com</email>
</author>
<published>2022-07-21T16:10:50+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=f32d5615a78a1256c4f557ccc6543866e75d03f4'/>
<id>f32d5615a78a1256c4f557ccc6543866e75d03f4</id>
<content type='text'>
commit d0be8347c623e0ac4202a1d4e0373882821f56b0 upstream.

This fixes the following trace which is caused by hci_rx_work starting up
*after* the final channel reference has been put() during sock_close() but
*before* the references to the channel have been destroyed, so instead
the code now rely on kref_get_unless_zero/l2cap_chan_hold_unless_zero to
prevent referencing a channel that is about to be destroyed.

  refcount_t: increment on 0; use-after-free.
  BUG: KASAN: use-after-free in refcount_dec_and_test+0x20/0xd0
  Read of size 4 at addr ffffffc114f5bf18 by task kworker/u17:14/705

  CPU: 4 PID: 705 Comm: kworker/u17:14 Tainted: G S      W
  4.14.234-00003-g1fb6d0bd49a4-dirty #28
  Hardware name: Qualcomm Technologies, Inc. SM8150 V2 PM8150
  Google Inc. MSM sm8150 Flame DVT (DT)
  Workqueue: hci0 hci_rx_work
  Call trace:
   dump_backtrace+0x0/0x378
   show_stack+0x20/0x2c
   dump_stack+0x124/0x148
   print_address_description+0x80/0x2e8
   __kasan_report+0x168/0x188
   kasan_report+0x10/0x18
   __asan_load4+0x84/0x8c
   refcount_dec_and_test+0x20/0xd0
   l2cap_chan_put+0x48/0x12c
   l2cap_recv_frame+0x4770/0x6550
   l2cap_recv_acldata+0x44c/0x7a4
   hci_acldata_packet+0x100/0x188
   hci_rx_work+0x178/0x23c
   process_one_work+0x35c/0x95c
   worker_thread+0x4cc/0x960
   kthread+0x1a8/0x1c4
   ret_from_fork+0x10/0x18

Cc: stable@kernel.org
Reported-by: Lee Jones &lt;lee.jones@linaro.org&gt;
Signed-off-by: Luiz Augusto von Dentz &lt;luiz.von.dentz@intel.com&gt;
Tested-by: Lee Jones &lt;lee.jones@linaro.org&gt;
Signed-off-by: Luiz Augusto von Dentz &lt;luiz.von.dentz@intel.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit d0be8347c623e0ac4202a1d4e0373882821f56b0 upstream.

This fixes the following trace which is caused by hci_rx_work starting up
*after* the final channel reference has been put() during sock_close() but
*before* the references to the channel have been destroyed, so instead
the code now rely on kref_get_unless_zero/l2cap_chan_hold_unless_zero to
prevent referencing a channel that is about to be destroyed.

  refcount_t: increment on 0; use-after-free.
  BUG: KASAN: use-after-free in refcount_dec_and_test+0x20/0xd0
  Read of size 4 at addr ffffffc114f5bf18 by task kworker/u17:14/705

  CPU: 4 PID: 705 Comm: kworker/u17:14 Tainted: G S      W
  4.14.234-00003-g1fb6d0bd49a4-dirty #28
  Hardware name: Qualcomm Technologies, Inc. SM8150 V2 PM8150
  Google Inc. MSM sm8150 Flame DVT (DT)
  Workqueue: hci0 hci_rx_work
  Call trace:
   dump_backtrace+0x0/0x378
   show_stack+0x20/0x2c
   dump_stack+0x124/0x148
   print_address_description+0x80/0x2e8
   __kasan_report+0x168/0x188
   kasan_report+0x10/0x18
   __asan_load4+0x84/0x8c
   refcount_dec_and_test+0x20/0xd0
   l2cap_chan_put+0x48/0x12c
   l2cap_recv_frame+0x4770/0x6550
   l2cap_recv_acldata+0x44c/0x7a4
   hci_acldata_packet+0x100/0x188
   hci_rx_work+0x178/0x23c
   process_one_work+0x35c/0x95c
   worker_thread+0x4cc/0x960
   kthread+0x1a8/0x1c4
   ret_from_fork+0x10/0x18

Cc: stable@kernel.org
Reported-by: Lee Jones &lt;lee.jones@linaro.org&gt;
Signed-off-by: Luiz Augusto von Dentz &lt;luiz.von.dentz@intel.com&gt;
Tested-by: Lee Jones &lt;lee.jones@linaro.org&gt;
Signed-off-by: Luiz Augusto von Dentz &lt;luiz.von.dentz@intel.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
</feed>
