linux-stable.git/include/net/addrconf.h, branch v4.13.4

ipv6: fix NULL dereference in ip6_route_dev_notify()

2017-08-16T00:06:34+00:00

Based on a syzkaller report [1], I found that a per cpu allocation
failure in snmp6_alloc_dev() would then lead to NULL dereference in
ip6_route_dev_notify().

It seems this is a very old bug, thus no Fixes tag in this submission.

Let's add in6_dev_put_clear() helper, as we will probably use
it elsewhere (once available/present in net-next)

[1]
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
   (ftrace buffer empty)
Modules linked in:
CPU: 1 PID: 17294 Comm: syz-executor6 Not tainted 4.13.0-rc2+ #10
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
task: ffff88019f456680 task.stack: ffff8801c6e58000
RIP: 0010:__read_once_size include/linux/compiler.h:250 [inline]
RIP: 0010:atomic_read arch/x86/include/asm/atomic.h:26 [inline]
RIP: 0010:refcount_sub_and_test+0x7d/0x1b0 lib/refcount.c:178
RSP: 0018:ffff8801c6e5f1b0 EFLAGS: 00010202
RAX: 0000000000000037 RBX: dffffc0000000000 RCX: ffffc90005d25000
RDX: ffff8801c6e5f218 RSI: ffffffff82342bbf RDI: 0000000000000001
RBP: ffff8801c6e5f240 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 1ffff10038dcbe37
R13: 0000000000000006 R14: 0000000000000001 R15: 00000000000001b8
FS:  00007f21e0429700(0000) GS:ffff8801dc100000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001ddbc22000 CR3: 00000001d632b000 CR4: 00000000001426e0
DR0: 0000000020000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600
Call Trace:
 refcount_dec_and_test+0x1a/0x20 lib/refcount.c:211
 in6_dev_put include/net/addrconf.h:335 [inline]
 ip6_route_dev_notify+0x1c9/0x4a0 net/ipv6/route.c:3732
 notifier_call_chain+0x136/0x2c0 kernel/notifier.c:93
 __raw_notifier_call_chain kernel/notifier.c:394 [inline]
 raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401
 call_netdevice_notifiers_info+0x51/0x90 net/core/dev.c:1678
 call_netdevice_notifiers net/core/dev.c:1694 [inline]
 rollback_registered_many+0x91c/0xe80 net/core/dev.c:7107
 rollback_registered+0x1be/0x3c0 net/core/dev.c:7149
 register_netdevice+0xbcd/0xee0 net/core/dev.c:7587
 register_netdev+0x1a/0x30 net/core/dev.c:7669
 loopback_net_init+0x76/0x160 drivers/net/loopback.c:214
 ops_init+0x10a/0x570 net/core/net_namespace.c:118
 setup_net+0x313/0x710 net/core/net_namespace.c:294
 copy_net_ns+0x27c/0x580 net/core/net_namespace.c:418
 create_new_namespaces+0x425/0x880 kernel/nsproxy.c:107
 unshare_nsproxy_namespaces+0xae/0x1e0 kernel/nsproxy.c:206
 SYSC_unshare kernel/fork.c:2347 [inline]
 SyS_unshare+0x653/0xfa0 kernel/fork.c:2297
 entry_SYSCALL_64_fastpath+0x1f/0xbe
RIP: 0033:0x4512c9
RSP: 002b:00007f21e0428c08 EFLAGS: 00000216 ORIG_RAX: 0000000000000110
RAX: ffffffffffffffda RBX: 0000000000718150 RCX: 00000000004512c9
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000062020200
RBP: 0000000000000086 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000216 R12: 00000000004b973d
R13: 00000000ffffffff R14: 000000002001d000 R15: 00000000000002dd
Code: 50 2b 34 82 c7 00 f1 f1 f1 f1 c7 40 04 04 f2 f2 f2 c7 40 08 f3 f3
f3 f3 e8 a1 43 39 ff 4c 89 f8 48 8b 95 70 ff ff ff 48 c1 e8 03 <0f> b6
0c 18 4c 89 f8 83 e0 07 83 c0 03 38 c8 7c 08 84 c9 0f 85
RIP: __read_once_size include/linux/compiler.h:250 [inline] RSP:
ffff8801c6e5f1b0
RIP: atomic_read arch/x86/include/asm/atomic.h:26 [inline] RSP:
ffff8801c6e5f1b0
RIP: refcount_sub_and_test+0x7d/0x1b0 lib/refcount.c:178 RSP:
ffff8801c6e5f1b0
---[ end trace e441d046c6410d31 ]---

Signed-off-by: Eric Dumazet 
Reported-by: Dmitry Vyukov 
Signed-off-by: David S. Miller

net, ipv6: convert inet6_ifaddr.refcnt from atomic_t to refcount_t

2017-07-04T08:29:04+00:00

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova 
Signed-off-by: Hans Liljestrand 
Signed-off-by: Kees Cook 
Signed-off-by: David Windsor 
Signed-off-by: David S. Miller

net, ipv6: convert inet6_dev.refcnt from atomic_t to refcount_t

2017-07-04T08:29:04+00:00

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova 
Signed-off-by: Hans Liljestrand 
Signed-off-by: Kees Cook 
Signed-off-by: David Windsor 
Signed-off-by: David S. Miller

Ipvlan should return an error when an address is already in use.

2017-06-09T16:26:07+00:00

The ipvlan code already knows how to detect when a duplicate address is
about to be assigned to an ipvlan device.  However, that failure is not
propogated outward and leads to a silent failure.

Introduce a validation step at ip address creation time and allow device
drivers to register to validate the incoming ip addresses.  The ipvlan
code is the first consumer.  If it detects an address in use, we can
return an error to the user before beginning to commit the new ifa in
the networking code.

This can be especially useful if it is necessary to provision many
ipvlans in containers.  The provisioning software (or operator) can use
this to detect situations where an ip address is unexpectedly in use.

Signed-off-by: Krister Johansen 
Signed-off-by: David S. Miller

ipv6: reorder ip6_route_dev_notifier after ipv6_dev_notf

2017-05-08T21:31:24+00:00

For each netns (except init_net), we initialize its null entry
in 3 places:

1) The template itself, as we use kmemdup()
2) Code around dst_init_metrics() in ip6_route_net_init()
3) ip6_route_dev_notify(), which is supposed to initialize it after
   loopback registers

Unfortunately the last one still happens in a wrong order because
we expect to initialize net->ipv6.ip6_null_entry->rt6i_idev to
net->loopback_dev's idev, thus we have to do that after we add
idev to loopback. However, this notifier has priority == 0 same as
ipv6_dev_notf, and ipv6_dev_notf is registered after
ip6_route_dev_notifier so it is called actually after
ip6_route_dev_notifier. This is similar to commit 2f460933f58e
("ipv6: initialize route null entry in addrconf_init()") which
fixes init_net.

Fix it by picking a smaller priority for ip6_route_dev_notifier.
Also, we have to release the refcnt accordingly when unregistering
loopback_dev because device exit functions are called before subsys
exit functions.

Acked-by: David Ahern 
Tested-by: David Ahern 
Signed-off-by: Cong Wang 
Signed-off-by: David S. Miller

{net,IB}/{rxe,usnic}: Utilize generic mac to eui32 function

2017-04-25T18:21:34+00:00

This logic seems to be duplicated in (at least) three separate files.
Move it to one place so code can be re-use.

Signed-off-by: Yuval Shaia 
Reviewed-by: Leon Romanovsky

net: ipv6: Refactor inet6_netconf_notify_devconf to take event

2017-03-29T05:32:42+00:00

Refactor inet6_netconf_notify_devconf to take the event as an input arg.

Signed-off-by: David Ahern 
Signed-off-by: David S. Miller

inet: collapse ipv4/v6 rcv_saddr_equal functions into one

2017-01-18T18:04:28+00:00

We pass these per-protocol equal functions around in various places, but
we can just have one function that checks the sk->sk_family and then do
the right comparison function.  I've also changed the ipv4 version to
not cast to inet_sock since it is unneeded.

Signed-off-by: Josef Bacik 
Signed-off-by: David S. Miller

ipv6: fix a potential deadlock in do_ipv6_setsockopt()

2016-10-21T15:29:02+00:00

Baozeng reported this deadlock case:

       CPU0                    CPU1
       ----                    ----
  lock([  165.136033] sk_lock-AF_INET6);
                               lock([  165.136033] rtnl_mutex);
                               lock([  165.136033] sk_lock-AF_INET6);
  lock([  165.136033] rtnl_mutex);

Similar to commit 87e9f0315952
("ipv4: fix a potential deadlock in mcast getsockopt() path")
this is due to we still have a case, ipv6_sock_mc_close(),
where we acquire sk_lock before rtnl_lock. Close this deadlock
with the similar solution, that is always acquire rtnl lock first.

Fixes: baf606d9c9b1 ("ipv4,ipv6: grab rtnl before locking the socket")
Reported-by: Baozeng Ding 
Tested-by: Baozeng Ding 
Cc: Marcelo Ricardo Leitner 
Signed-off-by: Cong Wang 
Reviewed-by: Marcelo Ricardo Leitner 
Signed-off-by: David S. Miller

ipv6 addrconf: implement RFC7559 router solicitation backoff

2016-09-30T05:54:28+00:00

This implements:
  https://tools.ietf.org/html/rfc7559

Backoff is performed according to RFC3315 section 14:
  https://tools.ietf.org/html/rfc3315#section-14

We allow setting /proc/sys/net/ipv6/conf/*/router_solicitations
to a negative value meaning an unlimited number of retransmits,
and we make this the new default (inline with the RFC).

We also add a new setting:
  /proc/sys/net/ipv6/conf/*/router_solicitation_max_interval
defaulting to 1 hour (per RFC recommendation).

Signed-off-by: Maciej Żenczykowski 
Acked-by: Erik Kline 
Signed-off-by: David S. Miller