[ Upstream commit 99014088156cd78867d19514a0bc771c4b86b93b ]

The IPv6 Multicast Router Advertisements parsing has the following two
issues:

For one thing, ICMPv6 MRD Advertisements are smaller than ICMPv6 MLD
messages (ICMPv6 MRD Adv.: 8 bytes vs. ICMPv6 MLDv1/2: >= 24 bytes,
assuming MLDv2 Reports with at least one multicast address entry).
When ipv6_mc_check_mld_msg() tries to parse an Multicast Router
Advertisement its MLD length check will fail - and it will wrongly
return -EINVAL, even if we have a valid MRD Advertisement. With the
returned -EINVAL the bridge code will assume a broken packet and will
wrongly discard it, potentially leading to multicast packet loss towards
multicast routers.

The second issue is the MRD header parsing in
br_ip6_multicast_mrd_rcv(): It wrongly checks for an ICMPv6 header
immediately after the IPv6 header (IPv6 next header type). However
according to RFC4286, section 2 all MRD messages contain a Router Alert
option (just like MLD). So instead there is an IPv6 Hop-by-Hop option
for the Router Alert between the IPv6 and ICMPv6 header, again leading
to the bridge wrongly discarding Multicast Router Advertisements.

To fix these two issues, introduce a new return value -ENODATA to
ipv6_mc_check_mld() to indicate a valid ICMPv6 packet with a hop-by-hop
option which is not an MLD but potentially an MRD packet. This also
simplifies further parsing in the bridge code, as ipv6_mc_check_mld()
already fully checks the ICMPv6 header and hop-by-hop option.

These issues were found and fixed with the help of the mrdisc tool
(https://github.com/troglobit/mrdisc).

Fixes: 4b3087c7e37f ("bridge: Snoop Multicast Router Advertisements")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

This patch is to do 3 things for ipv6_dev_find():

  As David A. noticed,

  - rt6_lookup() is not really needed. Different from __ip_dev_find(),
    ipv6_dev_find() doesn't have a compatibility problem, so remove it.

  As Hideaki suggested,

  - "valid" (non-tentative) check for the address is also needed.
    ipv6_chk_addr() calls ipv6_chk_addr_and_flags(), which will
    traverse the address hash list, but it's heavy to be called
    inside ipv6_dev_find(). This patch is to reuse the code of
    ipv6_chk_addr_and_flags() for ipv6_dev_find().

  - dev parameter is passed into ipv6_dev_find(), as link-local
    addresses from user space has sin6_scope_id set and the dev
    lookup needs it.

Fixes: 81f6cb31222d ("ipv6: add ipv6_dev_find()")
Suggested-by: YOSHIFUJI Hideaki <hideaki.yoshifuji@miraclelinux.com>
Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is to add an ip_dev_find like function for ipv6, used to find
the dev by saddr.

It will be used by TIPC protocol. So also export it.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

IPV6_ADDRFORM causes resource leaks when converting an IPv6 socket
to IPv4, particularly struct ipv6_ac_socklist. Similar to
struct ipv6_mc_socklist, we should just close it on this path.

This bug can be easily reproduced with the following C program:

  #include <stdio.h>
  #include <string.h>
  #include <sys/types.h>
  #include <sys/socket.h>
  #include <arpa/inet.h>

  int main()
  {
    int s, value;
    struct sockaddr_in6 addr;
    struct ipv6_mreq m6;

    s = socket(AF_INET6, SOCK_DGRAM, 0);
    addr.sin6_family = AF_INET6;
    addr.sin6_port = htons(5000);
    inet_pton(AF_INET6, "::ffff:192.168.122.194", &addr.sin6_addr);
    connect(s, (struct sockaddr *)&addr, sizeof(addr));

    inet_pton(AF_INET6, "fe80::AAAA", &m6.ipv6mr_multiaddr);
    m6.ipv6mr_interface = 5;
    setsockopt(s, SOL_IPV6, IPV6_JOIN_ANYCAST, &m6, sizeof(m6));

    value = AF_INET;
    setsockopt(s, SOL_IPV6, IPV6_ADDRFORM, &value, sizeof(value));

    close(s);
    return 0;
  }

Reported-by: ch3332xr@gmail.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

RFC4862 5.5.3 e) prevents received Router Advertisements from reducing
the Valid Lifetime of configured addresses to less than two hours, thus
preventing hosts from reacting to the information provided by a router
that has positive knowledge that a prefix has become invalid.

This patch makes hosts honor all Valid Lifetime values, as per
draft-gont-6man-slaac-renum-06, Section 4.2. This is meant to help
mitigate the problem discussed in draft-ietf-v6ops-slaac-renum.

Note: Attacks aiming at disabling an advertised prefix via a Valid
Lifetime of 0 are not really more harmful than other attacks
that can be performed via forged RA messages, such as those
aiming at completely disabling a next-hop router via an RA that
advertises a Router Lifetime of 0, or performing a Denial of
Service (DoS) attack by advertising illegitimate prefixes via
forged PIOs.  In scenarios where RA-based attacks are of concern,
proper mitigations such as RA-Guard [RFC6105] [RFC7113] should
be implemented.

Signed-off-by: Fernando Gont <fgont@si6networks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds a functionality to addrconf to check on a specific RPL
address configuration. According to RFC 6554:

To detect loops in the SRH, a router MUST determine if the SRH
includes multiple addresses assigned to any interface on that
router. If such addresses appear more than once and are separated by
at least one address not assigned to that router.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The sparse commit 6002ded74587 ("add a flag to warn on casts to/from
bitwise pointers") introduced a check for non-direct casts from/to
restricted datatypes (when -Wbitwise-pointer is enabled).

This triggered a warning in the 64 bit optimized ipv6_addr_is_*() functions
because sparse doesn't know that the buffer already points to some data in
the correct bitwise integer format. But these were correct and can
therefore be marked with __force to signalize sparse an intended cast to a
specific bitwise type.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Consistent with how pskb_may_pull() also now does so.

Signed-off-by: David S. Miller <davem@davemloft.net>

Commit ba5ea614622d ("bridge: simplify ip_mc_check_igmp() and
ipv6_mc_check_mld() calls") replaces direct calls to pskb_may_pull()
in br_ipv6_multicast_mld2_report() with calls to ipv6_mc_may_pull(),
that returns -EINVAL on buffers too short to be valid IPv6 packets,
while maintaining the previous handling of the return code.

This leads to the direct opposite of the intended effect: if the
packet is malformed, -EINVAL evaluates as true, and we'll happily
proceed with the processing.

Return 0 if the packet is too short, in the same way as this was
fixed for IPv4 by commit 083b78a9ed64 ("ip: fix ip_mc_may_pull()
return value").

I don't have a reproducer for this, unlike the one referred to by
the IPv4 commit, but this is clearly broken.

Fixes: ba5ea614622d ("bridge: simplify ip_mc_check_igmp() and ipv6_mc_check_mld() calls")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Get the ingress interface and increment ICMP counters based on that
instead of skb->dev when the the dev is a VRF device.

This is a follow up on the following message:
https://www.spinics.net/lists/netdev/msg560268.html

v2: Avoid changing skb->dev since it has unintended effect for local
    delivery (David Ahern).
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>