linux-stable.git/include/media, branch v4.19.3

media: cec: fix the Signal Free Time calculation

2018-11-13T19:08:53+00:00

commit 7d867a1b765e2b70815fec4964d7822a976ed349 upstream.

The calculation of the Signal Free Time in the framework was not
correct. If a message was received, then the next transmit should be
considered a New Initiator and use a shorter SFT value.

This was not done with the result that if both sides where continually
sending messages, they both could use the same SFT value and one side
could deny the other side access to the bus.

Note that this fix does not take the corner case into account where
a receive is in progress when you call adap_transmit.

Signed-off-by: Hans Verkuil 
Cc:       # for v4.18 and up
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

media: cec: make cec_get_edid_spa_location() an inline function

2018-11-13T19:08:52+00:00

commit b915bf575d5b7774d0f22d57d6c143e07dcaade2 upstream.

This function is needed by both V4L2 and CEC, so move this to
cec.h as a static inline since there are no obvious shared
modules between the two subsystems.

This patch, together with the following ones, fixes a
dependency bug: if CEC_CORE is disabled, then building adv7604
(and other HDMI receivers) will fail because an essential
function is now stubbed out.

Signed-off-by: Hans Verkuil 
Cc:       # for v4.17 and up
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

media: v4l: event: Prevent freeing event subscriptions while accessed

2018-10-03T10:32:51+00:00

The event subscriptions are added to the subscribed event list while
holding a spinlock, but that lock is subsequently released while still
accessing the subscription object. This makes it possible to unsubscribe
the event --- and freeing the subscription object's memory --- while
the subscription object is simultaneously accessed.

Prevent this by adding a mutex to serialise the event subscription and
unsubscription. This also gives a guarantee to the callback ops that the
add op has returned before the del op is called.

This change also results in making the elems field less special:
subscriptions are only added to the event list once they are fully
initialised.

Signed-off-by: Sakari Ailus 
Reviewed-by: Hans Verkuil 
Reviewed-by: Laurent Pinchart 
Cc: stable@vger.kernel.org # for 4.14 and up
Fixes: c3b5b0241f62 ("V4L/DVB: V4L: Events: Add backend")
Signed-off-by: Mauro Carvalho Chehab

Merge tag 'mfd-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

2018-08-20T22:38:44+00:00

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Add Cirrus Logic Madera Codec (CS47L35, CS47L85 and CS47L90/91) driver
   - Add ChromeOS EC CEC driver
   - Add ROHM BD71837 PMIC driver

  New Device Support:
   - Add support for Dialog Semi DA9063L PMIC variant to DA9063
   - Add support for Intel Ice Lake to Intel-PLSS-PCI
   - Add support for X-Powers AXP806 to AXP20x

  New Functionality:
   - Add support for USB Charging to the ChromeOS Embedded Controller
   - Add support for HDMI CEC to the ChromeOS Embedded Controller
   - Add support for HDMI CEC to Intel HDMI
   - Add support for accessory detection to Madera devices
   - Allow individual pins to be configured via DT' wlf,csnaddr-pd
   - Provide legacy platform specific EEPROM/Watchdog commands; rave-sp

  Fix-upsL
   - Trivial renaming/spelling fixes; cros_ec, da9063-*
   - Convert to Managed Resources (devm_*); da9063-*, ti_am335x_tscadc
   - Transition to helper macros/functions; da9063-*
   - Constify; kempld-core
   - Improve error path/messages; wm8994-core
   - Disable IRQs locally instead of relying on USB subsystem; dln2
   - Remove unused code; rave-sp
   - New exports; sec-core

  Bug Fixes:
   - Fix possible false I2C transaction error; arizona-core
   - Fix declared memory area size; hi655x-pmic
   - Fix checksum type; rave-sp
   - Fix incorrect default serial port configuration: rave-sp
   - Fix incorrect coherent DMA mask for sub-devices; sm501"

* tag 'mfd-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (60 commits)
  mfd: madera: Add register definitions for accessory detect
  mfd: sm501: Set coherent_dma_mask when creating subdevices
  mfd: bd71837: Devicetree bindings for ROHM BD71837 PMIC
  mfd: bd71837: Core driver for ROHM BD71837 PMIC
  media: platform: cros-ec-cec: Fix dependency on MFD_CROS_EC
  mfd: sec-core: Export OF module alias table
  mfd: as3722: Disable auto-power-on when AC OK
  mfd: axp20x: Support AXP806 in I2C mode
  mfd: axp20x: Add self-working mode support for AXP806
  dt-bindings: mfd: axp20x: Add "self-working" mode for AXP806
  mfd: wm8994: Allow to configure CS/ADDR Pulldown from dts
  mfd: wm8994: Allow to configure Speaker Mode Pullup from dts
  mfd: rave-sp: Emulate CMD_GET_STATUS on device that don't support it
  mfd: rave-sp: Add legacy watchdog ping command translation
  mfd: rave-sp: Add legacy EEPROM access command translation
  mfd: rave-sp: Initialize flow control and parity of the port
  mfd: rave-sp: Fix incorrectly specified checksum type
  mfd: rave-sp: Remove unused defines
  mfd: hi655x: Fix regmap area declared size for hi655x
  mfd: ti_am335x_tscadc: Fix struct clk memory leak
  ...

media: vsp1: Support Interlaced display pipelines

2018-08-03T20:02:27+00:00

Calculate the top and bottom fields for the interlaced frames and
utilise the extended display list command feature to implement the
auto-field operations. This allows the DU to update the VSP2 registers
dynamically based upon the currently processing field.

Signed-off-by: Kieran Bingham 
Signed-off-by: Laurent Pinchart 
Signed-off-by: Mauro Carvalho Chehab

media: dvb: represent min/max/step/tolerance freqs in Hz

2018-08-02T22:10:48+00:00

Right now, satellite frontend drivers specify frequencies in kHz,
while terrestrial/cable ones specify in Hz. That's confusing
for developers.

However, the main problem is that universal frontends capable
of handling both satellite and non-satelite delivery systems
are appearing. We end by needing to hack the drivers in
order to support such hybrid frontends.

So, convert everything to specify frontend frequencies in Hz.

Tested-by: Katsuhiro Suzuki 
Signed-off-by: Mauro Carvalho Chehab

media: dvb: convert tuner_info frequencies to Hz

2018-08-02T20:14:50+00:00

Right now, satellite tuner drivers specify frequencies in kHz,
while terrestrial/cable ones specify in Hz. That's confusing
for developers.

However, the main problem is that universal tuners capable
of handling both satellite and non-satelite delivery systems
are appearing. We end by needing to hack the drivers in
order to support such hybrid tuners.

So, convert everything to specify tuner frequencies in Hz.

Plese notice that a similar patch is also needed for frontends.

Tested-by: Katsuhiro Suzuki 
Acked-by: Michael Büsch 
Signed-off-by: Mauro Carvalho Chehab

media: v4l2-ctrls.h: fix v4l2_ctrl field description typos

2018-07-25T12:36:05+00:00

Signed-off-by: Baruch Siach 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

media: v4l2-mem2mem: add v4l2_m2m_last_buf()

2018-07-25T12:10:31+00:00

This can be used to mark the last queued source buffer as the last
buffer.

Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

media: cec: add support for 5V signal testing

2018-07-25T11:11:48+00:00

Add support for the new 5V CEC events

Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab