linux-stable.git/include/linux, branch v6.7.7 Linux kernel stable tree iommu: Add mm_get_enqcmd_pasid() helper function 2024-03-01T12:41:59+00:00 Tina Zhang tina.zhang@intel.com 2023-10-27T00:05:22+00:00 7c122e02b32f92f9b0ef06fa90d5f1172afeea96 [ Upstream commit 2396046d75d3c0b2cfead852a77efd023f8539dc ] mm_get_enqcmd_pasid() should be used by architecture code and closely related to learn the PASID value that the x86 ENQCMD operation should use for the mm. For the moment SMMUv3 uses this without any connection to ENQCMD, it will be cleaned up similar to how the prior patch made VT-d use the PASID argument of set_dev_pasid(). The motivation is to replace mm->pasid with an iommu private data structure that is introduced in a later patch. Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Tina Zhang <tina.zhang@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20231027000525.1278806-4-tina.zhang@intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Stable-dep-of: b5bf7778b722 ("iommu/arm-smmu-v3: Do not use GFP_KERNEL under as spinlock") Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 2396046d75d3c0b2cfead852a77efd023f8539dc ]

mm_get_enqcmd_pasid() should be used by architecture code and closely
related to learn the PASID value that the x86 ENQCMD operation should
use for the mm.

For the moment SMMUv3 uses this without any connection to ENQCMD, it
will be cleaned up similar to how the prior patch made VT-d use the
PASID argument of set_dev_pasid().

The motivation is to replace mm->pasid with an iommu private data
structure that is introduced in a later patch.

Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20231027000525.1278806-4-tina.zhang@intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Stable-dep-of: b5bf7778b722 ("iommu/arm-smmu-v3: Do not use GFP_KERNEL under as spinlock")
Signed-off-by: Sasha Levin <sashal@kernel.org>
x86/numa: Fix the address overlap check in numa_fill_memblks() 2024-03-01T12:41:54+00:00 Alison Schofield alison.schofield@intel.com 2024-01-12T20:09:50+00:00 6b725eab0967839ec393d8caa827cec2886c2aa5 [ Upstream commit 9b99c17f7510bed2adbe17751fb8abddba5620bc ] numa_fill_memblks() fills in the gaps in numa_meminfo memblks over a physical address range. To do so, it first creates a list of existing memblks that overlap that address range. The issue is that it is off by one when comparing to the end of the address range, so memblks that do not overlap are selected. The impact of selecting a memblk that does not actually overlap is that an existing memblk may be filled when the expected action is to do nothing and return NUMA_NO_MEMBLK to the caller. The caller can then add a new NUMA node and memblk. Replace the broken open-coded search for address overlap with the memblock helper memblock_addrs_overlap(). Update the kernel doc and in code comments. Suggested by: "Huang, Ying" <ying.huang@intel.com> Fixes: 8f012db27c95 ("x86/numa: Introduce numa_fill_memblks()") Signed-off-by: Alison Schofield <alison.schofield@intel.com> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Link: https://lore.kernel.org/r/10a3e6109c34c21a8dd4c513cf63df63481a2b07.1705085543.git.alison.schofield@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 9b99c17f7510bed2adbe17751fb8abddba5620bc ]

numa_fill_memblks() fills in the gaps in numa_meminfo memblks over a
physical address range. To do so, it first creates a list of existing
memblks that overlap that address range. The issue is that it is off
by one when comparing to the end of the address range, so memblks
that do not overlap are selected.

The impact of selecting a memblk that does not actually overlap is
that an existing memblk may be filled when the expected action is to
do nothing and return NUMA_NO_MEMBLK to the caller. The caller can
then add a new NUMA node and memblk.

Replace the broken open-coded search for address overlap with the
memblock helper memblock_addrs_overlap(). Update the kernel doc
and in code comments.

Suggested by: "Huang, Ying" <ying.huang@intel.com>

Fixes: 8f012db27c95 ("x86/numa: Introduce numa_fill_memblks()")
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/10a3e6109c34c21a8dd4c513cf63df63481a2b07.1705085543.git.alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
IB/mlx5: Don't expose debugfs entries for RRoCE general parameters if not supported 2024-03-01T12:41:52+00:00 Mark Zhang markzhang@nvidia.com 2024-01-28T09:29:12+00:00 35dae0bd7ea51d13861fddeefc1a8abf1e34c0cd [ Upstream commit 43fdbd140238d44e7e847232719fef7d20f9d326 ] debugfs entries for RRoCE general CC parameters must be exposed only when they are supported, otherwise when accessing them there may be a syndrome error in kernel log, for example: $ cat /sys/kernel/debug/mlx5/0000:08:00.1/cc_params/rtt_resp_dscp cat: '/sys/kernel/debug/mlx5/0000:08:00.1/cc_params/rtt_resp_dscp': Invalid argument $ dmesg mlx5_core 0000:08:00.1: mlx5_cmd_out_err:805:(pid 1253): QUERY_CONG_PARAMS(0x824) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x325a82), err(-22) Fixes: 66fb1d5df6ac ("IB/mlx5: Extend debug control for CC parameters") Reviewed-by: Edward Srouji <edwards@nvidia.com> Signed-off-by: Mark Zhang <markzhang@nvidia.com> Link: https://lore.kernel.org/r/e7ade70bad52b7468bdb1de4d41d5fad70c8b71c.1706433934.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 43fdbd140238d44e7e847232719fef7d20f9d326 ]

debugfs entries for RRoCE general CC parameters must be exposed only when
they are supported, otherwise when accessing them there may be a syndrome
error in kernel log, for example:

$ cat /sys/kernel/debug/mlx5/0000:08:00.1/cc_params/rtt_resp_dscp
cat: '/sys/kernel/debug/mlx5/0000:08:00.1/cc_params/rtt_resp_dscp': Invalid argument
$ dmesg
 mlx5_core 0000:08:00.1: mlx5_cmd_out_err:805:(pid 1253): QUERY_CONG_PARAMS(0x824) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x325a82), err(-22)

Fixes: 66fb1d5df6ac ("IB/mlx5: Extend debug control for CC parameters")
Reviewed-by: Edward Srouji <edwards@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/e7ade70bad52b7468bdb1de4d41d5fad70c8b71c.1706433934.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
mm/swap: fix race when skipping swapcache 2024-03-01T12:41:47+00:00 Kairui Song kasong@tencent.com 2024-02-06T18:25:59+00:00 d183a4631acfc7af955c02a02e739cec15f5234d commit 13ddaf26be324a7f951891ecd9ccd04466d27458 upstream. When skipping swapcache for SWP_SYNCHRONOUS_IO, if two or more threads swapin the same entry at the same time, they get different pages (A, B). Before one thread (T0) finishes the swapin and installs page (A) to the PTE, another thread (T1) could finish swapin of page (B), swap_free the entry, then swap out the possibly modified page reusing the same entry. It breaks the pte_same check in (T0) because PTE value is unchanged, causing ABA problem. Thread (T0) will install a stalled page (A) into the PTE and cause data corruption. One possible callstack is like this: CPU0 CPU1 ---- ---- do_swap_page() do_swap_page() with same entry <direct swapin path> <direct swapin path> <alloc page A> <alloc page B> swap_read_folio() <- read to page A swap_read_folio() <- read to page B <slow on later locks or interrupt> <finished swapin first> ... set_pte_at() swap_free() <- entry is free <write to page B, now page A stalled> <swap out page B to same swap entry> pte_same() <- Check pass, PTE seems unchanged, but page A is stalled! swap_free() <- page B content lost! set_pte_at() <- staled page A installed! And besides, for ZRAM, swap_free() allows the swap device to discard the entry content, so even if page (B) is not modified, if swap_read_folio() on CPU0 happens later than swap_free() on CPU1, it may also cause data loss. To fix this, reuse swapcache_prepare which will pin the swap entry using the cache flag, and allow only one thread to swap it in, also prevent any parallel code from putting the entry in the cache. Release the pin after PT unlocked. Racers just loop and wait since it's a rare and very short event. A schedule_timeout_uninterruptible(1) call is added to avoid repeated page faults wasting too much CPU, causing livelock or adding too much noise to perf statistics. A similar livelock issue was described in commit 029c4628b2eb ("mm: swap: get rid of livelock in swapin readahead") Reproducer: This race issue can be triggered easily using a well constructed reproducer and patched brd (with a delay in read path) [1]: With latest 6.8 mainline, race caused data loss can be observed easily: $ gcc -g -lpthread test-thread-swap-race.c && ./a.out Polulating 32MB of memory region... Keep swapping out... Starting round 0... Spawning 65536 workers... 32746 workers spawned, wait for done... Round 0: Error on 0x5aa00, expected 32746, got 32743, 3 data loss! Round 0: Error on 0x395200, expected 32746, got 32743, 3 data loss! Round 0: Error on 0x3fd000, expected 32746, got 32737, 9 data loss! Round 0 Failed, 15 data loss! This reproducer spawns multiple threads sharing the same memory region using a small swap device. Every two threads updates mapped pages one by one in opposite direction trying to create a race, with one dedicated thread keep swapping out the data out using madvise. The reproducer created a reproduce rate of about once every 5 minutes, so the race should be totally possible in production. After this patch, I ran the reproducer for over a few hundred rounds and no data loss observed. Performance overhead is minimal, microbenchmark swapin 10G from 32G zram: Before: 10934698 us After: 11157121 us Cached: 13155355 us (Dropping SWP_SYNCHRONOUS_IO flag) [kasong@tencent.com: v4] Link: https://lkml.kernel.org/r/20240219082040.7495-1-ryncsn@gmail.com Link: https://lkml.kernel.org/r/20240206182559.32264-1-ryncsn@gmail.com Fixes: 0bcac06f27d7 ("mm, swap: skip swapcache for swapin of synchronous device") Reported-by: "Huang, Ying" <ying.huang@intel.com> Closes: https://lore.kernel.org/lkml/87bk92gqpx.fsf_-_@yhuang6-desk2.ccr.corp.intel.com/ Link: https://github.com/ryncsn/emm-test-project/tree/master/swap-stress-race [1] Signed-off-by: Kairui Song <kasong@tencent.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Yu Zhao <yuzhao@google.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Chris Li <chrisl@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Barry Song <21cnbao@gmail.com> Cc: SeongJae Park <sj@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 13ddaf26be324a7f951891ecd9ccd04466d27458 upstream.

When skipping swapcache for SWP_SYNCHRONOUS_IO, if two or more threads
swapin the same entry at the same time, they get different pages (A, B).
Before one thread (T0) finishes the swapin and installs page (A) to the
PTE, another thread (T1) could finish swapin of page (B), swap_free the
entry, then swap out the possibly modified page reusing the same entry.
It breaks the pte_same check in (T0) because PTE value is unchanged,
causing ABA problem.  Thread (T0) will install a stalled page (A) into the
PTE and cause data corruption.

One possible callstack is like this:

CPU0                                 CPU1
----                                 ----
do_swap_page()                       do_swap_page() with same entry
<direct swapin path>                 <direct swapin path>
<alloc page A>                       <alloc page B>
swap_read_folio() <- read to page A  swap_read_folio() <- read to page B
<slow on later locks or interrupt>   <finished swapin first>
...                                  set_pte_at()
                                     swap_free() <- entry is free
                                     <write to page B, now page A stalled>
                                     <swap out page B to same swap entry>
pte_same() <- Check pass, PTE seems
              unchanged, but page A
              is stalled!
swap_free() <- page B content lost!
set_pte_at() <- staled page A installed!

And besides, for ZRAM, swap_free() allows the swap device to discard the
entry content, so even if page (B) is not modified, if swap_read_folio()
on CPU0 happens later than swap_free() on CPU1, it may also cause data
loss.

To fix this, reuse swapcache_prepare which will pin the swap entry using
the cache flag, and allow only one thread to swap it in, also prevent any
parallel code from putting the entry in the cache.  Release the pin after
PT unlocked.

Racers just loop and wait since it's a rare and very short event.  A
schedule_timeout_uninterruptible(1) call is added to avoid repeated page
faults wasting too much CPU, causing livelock or adding too much noise to
perf statistics.  A similar livelock issue was described in commit
029c4628b2eb ("mm: swap: get rid of livelock in swapin readahead")

Reproducer:

This race issue can be triggered easily using a well constructed
reproducer and patched brd (with a delay in read path) [1]:

With latest 6.8 mainline, race caused data loss can be observed easily:
$ gcc -g -lpthread test-thread-swap-race.c && ./a.out
  Polulating 32MB of memory region...
  Keep swapping out...
  Starting round 0...
  Spawning 65536 workers...
  32746 workers spawned, wait for done...
  Round 0: Error on 0x5aa00, expected 32746, got 32743, 3 data loss!
  Round 0: Error on 0x395200, expected 32746, got 32743, 3 data loss!
  Round 0: Error on 0x3fd000, expected 32746, got 32737, 9 data loss!
  Round 0 Failed, 15 data loss!

This reproducer spawns multiple threads sharing the same memory region
using a small swap device.  Every two threads updates mapped pages one by
one in opposite direction trying to create a race, with one dedicated
thread keep swapping out the data out using madvise.

The reproducer created a reproduce rate of about once every 5 minutes, so
the race should be totally possible in production.

After this patch, I ran the reproducer for over a few hundred rounds and
no data loss observed.

Performance overhead is minimal, microbenchmark swapin 10G from 32G
zram:

Before:     10934698 us
After:      11157121 us
Cached:     13155355 us (Dropping SWP_SYNCHRONOUS_IO flag)

[kasong@tencent.com: v4]
  Link: https://lkml.kernel.org/r/20240219082040.7495-1-ryncsn@gmail.com
Link: https://lkml.kernel.org/r/20240206182559.32264-1-ryncsn@gmail.com
Fixes: 0bcac06f27d7 ("mm, swap: skip swapcache for swapin of synchronous device")
Reported-by: "Huang, Ying" <ying.huang@intel.com>
Closes: https://lore.kernel.org/lkml/87bk92gqpx.fsf_-_@yhuang6-desk2.ccr.corp.intel.com/
Link: https://github.com/ryncsn/emm-test-project/tree/master/swap-stress-race [1]
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Yu Zhao <yuzhao@google.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Chris Li <chrisl@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via libaio 2024-03-01T12:41:46+00:00 Bart Van Assche bvanassche@acm.org 2024-02-15T20:47:38+00:00 1dc7d74fe456944a9b1c57bd776280249f441ac6 commit b820de741ae48ccf50dd95e297889c286ff4f760 upstream. If kiocb_set_cancel_fn() is called for I/O submitted via io_uring, the following kernel warning appears: WARNING: CPU: 3 PID: 368 at fs/aio.c:598 kiocb_set_cancel_fn+0x9c/0xa8 Call trace: kiocb_set_cancel_fn+0x9c/0xa8 ffs_epfile_read_iter+0x144/0x1d0 io_read+0x19c/0x498 io_issue_sqe+0x118/0x27c io_submit_sqes+0x25c/0x5fc __arm64_sys_io_uring_enter+0x104/0xab0 invoke_syscall+0x58/0x11c el0_svc_common+0xb4/0xf4 do_el0_svc+0x2c/0xb0 el0_svc+0x2c/0xa4 el0t_64_sync_handler+0x68/0xb4 el0t_64_sync+0x1a4/0x1a8 Fix this by setting the IOCB_AIO_RW flag for read and write I/O that is submitted by libaio. Suggested-by: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@lst.de> Cc: Avi Kivity <avi@scylladb.com> Cc: Sandeep Dhavale <dhavale@google.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: stable@vger.kernel.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20240215204739.2677806-2-bvanassche@acm.org Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b820de741ae48ccf50dd95e297889c286ff4f760 upstream.

If kiocb_set_cancel_fn() is called for I/O submitted via io_uring, the
following kernel warning appears:

WARNING: CPU: 3 PID: 368 at fs/aio.c:598 kiocb_set_cancel_fn+0x9c/0xa8
Call trace:
 kiocb_set_cancel_fn+0x9c/0xa8
 ffs_epfile_read_iter+0x144/0x1d0
 io_read+0x19c/0x498
 io_issue_sqe+0x118/0x27c
 io_submit_sqes+0x25c/0x5fc
 __arm64_sys_io_uring_enter+0x104/0xab0
 invoke_syscall+0x58/0x11c
 el0_svc_common+0xb4/0xf4
 do_el0_svc+0x2c/0xb0
 el0_svc+0x2c/0xa4
 el0t_64_sync_handler+0x68/0xb4
 el0t_64_sync+0x1a4/0x1a8

Fix this by setting the IOCB_AIO_RW flag for read and write I/O that is
submitted by libaio.

Suggested-by: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Avi Kivity <avi@scylladb.com>
Cc: Sandeep Dhavale <dhavale@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: stable@vger.kernel.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240215204739.2677806-2-bvanassche@acm.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
libceph: fail sparse-read if the data length doesn't match 2024-03-01T12:41:43+00:00 Xiubo Li xiubli@redhat.com 2023-10-13T05:55:44+00:00 136b4e1f6dad59945f18e7a3d90da572d3faa98b [ Upstream commit cd7d469c25704d414d71bf3644f163fb74e7996b ] Once this happens that means there have bugs. Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit cd7d469c25704d414d71bf3644f163fb74e7996b ]

Once this happens that means there have bugs.

Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
netfilter: ipset: fix performance regression in swap operation 2024-02-23T08:51:58+00:00 Jozsef Kadlecsik kadlec@netfilter.org 2024-01-29T09:57:01+00:00 970709a67696b100a57b33af1a3d75fc34b747eb commit 97f7cf1cd80eeed3b7c808b7c12463295c751001 upstream. The patch "netfilter: ipset: fix race condition between swap/destroy and kernel side add/del/test", commit 28628fa9 fixes a race condition. But the synchronize_rcu() added to the swap function unnecessarily slows it down: it can safely be moved to destroy and use call_rcu() instead. Eric Dumazet pointed out that simply calling the destroy functions as rcu callback does not work: sets with timeout use garbage collectors which need cancelling at destroy which can wait. Therefore the destroy functions are split into two: cancelling garbage collectors safely at executing the command received by netlink and moving the remaining part only into the rcu callback. Link: https://lore.kernel.org/lkml/C0829B10-EAA6-4809-874E-E1E9C05A8D84@automattic.com/ Fixes: 28628fa952fe ("netfilter: ipset: fix race condition between swap/destroy and kernel side add/del/test") Reported-by: Ale Crismani <ale.crismani@automattic.com> Reported-by: David Wang <00107082@163.com> Tested-by: David Wang <00107082@163.com> Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 97f7cf1cd80eeed3b7c808b7c12463295c751001 upstream.

The patch "netfilter: ipset: fix race condition between swap/destroy
and kernel side add/del/test", commit 28628fa9 fixes a race condition.
But the synchronize_rcu() added to the swap function unnecessarily slows
it down: it can safely be moved to destroy and use call_rcu() instead.

Eric Dumazet pointed out that simply calling the destroy functions as
rcu callback does not work: sets with timeout use garbage collectors
which need cancelling at destroy which can wait. Therefore the destroy
functions are split into two: cancelling garbage collectors safely at
executing the command received by netlink and moving the remaining
part only into the rcu callback.

Link: https://lore.kernel.org/lkml/C0829B10-EAA6-4809-874E-E1E9C05A8D84@automattic.com/
Fixes: 28628fa952fe ("netfilter: ipset: fix race condition between swap/destroy and kernel side add/del/test")
Reported-by: Ale Crismani <ale.crismani@automattic.com>
Reported-by: David Wang <00107082@163.com>
Tested-by: David Wang <00107082@163.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
blk-wbt: Fix detection of dirty-throttled tasks 2024-02-23T08:51:56+00:00 Jan Kara jack@suse.cz 2024-01-23T17:58:26+00:00 fd955c0da6262975c9a45bb4b0ca8674aaa09648 commit f814bdda774c183b0cc15ec8f3b6e7c6f4527ba5 upstream. The detection of dirty-throttled tasks in blk-wbt has been subtly broken since its beginning in 2016. Namely if we are doing cgroup writeback and the throttled task is not in the root cgroup, balance_dirty_pages() will set dirty_sleep for the non-root bdi_writeback structure. However blk-wbt checks dirty_sleep only in the root cgroup bdi_writeback structure. Thus detection of recently throttled tasks is not working in this case (we noticed this when we switched to cgroup v2 and suddently writeback was slow). Since blk-wbt has no easy way to get to proper bdi_writeback and furthermore its intention has always been to work on the whole device rather than on individual cgroups, just move the dirty_sleep timestamp from bdi_writeback to backing_dev_info. That fixes the checking for recently throttled task and saves memory for everybody as a bonus. CC: stable@vger.kernel.org Fixes: b57d74aff9ab ("writeback: track if we're sleeping on progress in balance_dirty_pages()") Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20240123175826.21452-1-jack@suse.cz [axboe: fixup indentation errors] Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f814bdda774c183b0cc15ec8f3b6e7c6f4527ba5 upstream.

The detection of dirty-throttled tasks in blk-wbt has been subtly broken
since its beginning in 2016. Namely if we are doing cgroup writeback and
the throttled task is not in the root cgroup, balance_dirty_pages() will
set dirty_sleep for the non-root bdi_writeback structure. However
blk-wbt checks dirty_sleep only in the root cgroup bdi_writeback
structure. Thus detection of recently throttled tasks is not working in
this case (we noticed this when we switched to cgroup v2 and suddently
writeback was slow).

Since blk-wbt has no easy way to get to proper bdi_writeback and
furthermore its intention has always been to work on the whole device
rather than on individual cgroups, just move the dirty_sleep timestamp
from bdi_writeback to backing_dev_info. That fixes the checking for
recently throttled task and saves memory for everybody as a bonus.

CC: stable@vger.kernel.org
Fixes: b57d74aff9ab ("writeback: track if we're sleeping on progress in balance_dirty_pages()")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240123175826.21452-1-jack@suse.cz
[axboe: fixup indentation errors]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gpiolib: add gpiod_to_gpio_device() stub for !GPIOLIB 2024-02-23T08:51:50+00:00 Krzysztof Kozlowski krzysztof.kozlowski@linaro.org 2024-01-25T08:15:59+00:00 88716f557b4968e32f56a90ae98f7b3dd6083118 commit 6ac86372102b477083db99a9af8246fb916271b5 upstream. Add empty stub of gpiod_to_gpio_device() when GPIOLIB is not enabled. Cc: <stable@vger.kernel.org> Fixes: 370232d096e3 ("gpiolib: provide gpiod_to_gpio_device()") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 6ac86372102b477083db99a9af8246fb916271b5 upstream.

Add empty stub of gpiod_to_gpio_device() when GPIOLIB is not enabled.

Cc: <stable@vger.kernel.org>
Fixes: 370232d096e3 ("gpiolib: provide gpiod_to_gpio_device()")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gpiolib: add gpio_device_get_base() stub for !GPIOLIB 2024-02-23T08:51:50+00:00 Krzysztof Kozlowski krzysztof.kozlowski@linaro.org 2024-01-25T08:16:00+00:00 548412022127785060f26ea9952ba46915f26126 commit ebe0c15b135b1e4092c25b95d89e9a5899467499 upstream. Add empty stub of gpio_device_get_base() when GPIOLIB is not enabled. Cc: <stable@vger.kernel.org> Fixes: 8c85a102fc4e ("gpiolib: provide gpio_device_get_base()") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ebe0c15b135b1e4092c25b95d89e9a5899467499 upstream.

Add empty stub of gpio_device_get_base() when GPIOLIB is not enabled.

Cc: <stable@vger.kernel.org>
Fixes: 8c85a102fc4e ("gpiolib: provide gpio_device_get_base()")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>