linux-stable.git/include/linux, branch v5.7.10

bpf: sockmap: Require attach_bpf_fd when detaching a program

2020-07-22T07:34:29+00:00

commit bb0de3131f4c60a9bf976681e0fe4d1e55c7a821 upstream.

The sockmap code currently ignores the value of attach_bpf_fd when
detaching a program. This is contrary to the usual behaviour of
checking that attach_bpf_fd represents the currently attached
program.

Ensure that attach_bpf_fd is indeed the currently attached
program. It turns out that all sockmap selftests already do this,
which indicates that this is unlikely to cause breakage.

Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Lorenz Bauer 
Signed-off-by: Alexei Starovoitov 
Link: https://lore.kernel.org/bpf/20200629095630.7933-5-lmb@cloudflare.com
Signed-off-by: Greg Kroah-Hartman

dmabuf: use spinlock to access dmabuf->name

2020-07-22T07:34:24+00:00

commit 6348dd291e3653534a9e28e6917569bc9967b35b upstream.

There exists a sleep-while-atomic bug while accessing the dmabuf->name
under mutex in the dmabuffs_dname(). This is caused from the SELinux
permissions checks on a process where it tries to validate the inherited
files from fork() by traversing them through iterate_fd() (which
traverse files under spin_lock) and call
match_file(security/selinux/hooks.c) where the permission checks happen.
This audit information is logged using dump_common_audit_data() where it
calls d_path() to get the file path name. If the file check happen on
the dmabuf's fd, then it ends up in ->dmabuffs_dname() and use mutex to
access dmabuf->name. The flow will be like below:
flush_unauthorized_files()
  iterate_fd()
    spin_lock() --> Start of the atomic section.
      match_file()
        file_has_perm()
          avc_has_perm()
            avc_audit()
              slow_avc_audit()
	        common_lsm_audit()
		  dump_common_audit_data()
		    audit_log_d_path()
		      d_path()
                        dmabuffs_dname()
                          mutex_lock()--> Sleep while atomic.

Call trace captured (on 4.19 kernels) is below:
___might_sleep+0x204/0x208
__might_sleep+0x50/0x88
__mutex_lock_common+0x5c/0x1068
__mutex_lock_common+0x5c/0x1068
mutex_lock_nested+0x40/0x50
dmabuffs_dname+0xa0/0x170
d_path+0x84/0x290
audit_log_d_path+0x74/0x130
common_lsm_audit+0x334/0x6e8
slow_avc_audit+0xb8/0xf8
avc_has_perm+0x154/0x218
file_has_perm+0x70/0x180
match_file+0x60/0x78
iterate_fd+0x128/0x168
selinux_bprm_committing_creds+0x178/0x248
security_bprm_committing_creds+0x30/0x48
install_exec_creds+0x1c/0x68
load_elf_binary+0x3a4/0x14e0
search_binary_handler+0xb0/0x1e0

So, use spinlock to access dmabuf->name to avoid sleep-while-atomic.

Cc:  [5.3+]
Signed-off-by: Charan Teja Kalla 
Reviewed-by: Michael J. Ruhl 
Acked-by: Christian König 
 [sumits: added comment to spinlock_t definition to avoid warning]
Signed-off-by: Sumit Semwal 
Link: https://patchwork.freedesktop.org/patch/msgid/a83e7f0d-4e54-9848-4b58-e1acdbe06735@codeaurora.org
Signed-off-by: Greg Kroah-Hartman

Input: elan_i2c - add more hardware ID for Lenovo laptops

2020-07-22T07:34:22+00:00

commit a50ca29523b18baea548bdf5df9b4b923c2bb4f6 upstream.

This adds more hardware IDs for Elan touchpads found in various Lenovo
laptops.

Signed-off-by: Dave Wang 
Link: https://lore.kernel.org/r/000201d5a8bd$9fead3f0$dfc07bd0$@emc.com.tw
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

serial: core: fix sysrq overhead regression

2020-07-22T07:34:20+00:00

commit 08d5470308ac3598e7709d08b8979ce6e9de8da2 upstream.

Commit 8e20fc391711 ("serial_core: Move sysrq functions from header
file") converted the inline sysrq helpers to exported functions which
are now called for every received character, interrupt and break signal
also on systems without CONFIG_MAGIC_SYSRQ_SERIAL instead of being
optimised away by the compiler.

Inlining these helpers again also avoids the function call overhead when
CONFIG_MAGIC_SYSRQ_SERIAL is enabled (e.g. when the port is not used as
a console).

Fixes: 8e20fc391711 ("serial_core: Move sysrq functions from header file")
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Signed-off-by: Johan Hovold 
Cc: stable 
Reviewed-by: Andy Shevchenko 
Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://lore.kernel.org/r/20200610152232.16925-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman

Revert "serial: core: Refactor uart_unlock_and_check_sysrq()"

2020-07-22T07:34:20+00:00

commit 10652a9e9fe3fbcaca090f99cd3060ac3fee2913 upstream.

This reverts commit da9a5aa3402db0ff3b57216d8dbf2478e1046cae.

In order to ease backporting a fix for a sysrq regression, revert this
rewrite which was since added on top.

The other sysrq helpers now bail out early when sysrq is not enabled;
it's better to keep that pattern here as well.

Note that the __releases() attribute won't be needed after the follow-on
fix either.

Fixes: da9a5aa3402d ("serial: core: Refactor uart_unlock_and_check_sysrq()")
Cc: stable 
Signed-off-by: Johan Hovold 
Reviewed-by: Andy Shevchenko 
Link: https://lore.kernel.org/r/20200610152232.16925-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman

blk-mq-debugfs: update blk_queue_flag_name[] accordingly for new flags

2020-07-22T07:33:59+00:00

[ Upstream commit bfe373f608cf81b7626dfeb904001b0e867c5110 ]

Else there may be magic numbers in /sys/kernel/debug/block/*/state.

Signed-off-by: Hou Tao 
Reviewed-by: Bart Van Assche 
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

cgroup: Fix sock_cgroup_data on big-endian.

2020-07-22T07:33:57+00:00

[ Upstream commit 14b032b8f8fce03a546dcf365454bec8c4a58d7d ]

In order for no_refcnt and is_data to be the lowest order two
bits in the 'val' we have to pad out the bitfield of the u8.

Fixes: ad0f75e5f57c ("cgroup: fix cgroup_sk_alloc() for sk_clone_lock()")
Reported-by: Guenter Roeck 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

cgroup: fix cgroup_sk_alloc() for sk_clone_lock()

2020-07-22T07:33:57+00:00

[ Upstream commit ad0f75e5f57ccbceec13274e1e242f2b5a6397ed ]

When we clone a socket in sk_clone_lock(), its sk_cgrp_data is
copied, so the cgroup refcnt must be taken too. And, unlike the
sk_alloc() path, sock_update_netprioidx() is not called here.
Therefore, it is safe and necessary to grab the cgroup refcnt
even when cgroup_sk_alloc is disabled.

sk_clone_lock() is in BH context anyway, the in_interrupt()
would terminate this function if called there. And for sk_alloc()
skcd->val is always zero. So it's safe to factor out the code
to make it more readable.

The global variable 'cgroup_sk_alloc_disabled' is used to determine
whether to take these reference counts. It is impossible to make
the reference counting correct unless we save this bit of information
in skcd->val. So, add a new bit there to record whether the socket
has already taken the reference counts. This obviously relies on
kmalloc() to align cgroup pointers to at least 4 bytes,
ARCH_KMALLOC_MINALIGN is certainly larger than that.

This bug seems to be introduced since the beginning, commit
d979a39d7242 ("cgroup: duplicate cgroup reference when cloning sockets")
tried to fix it but not compeletely. It seems not easy to trigger until
the recent commit 090e28b229af
("netprio_cgroup: Fix unlimited memory leak of v2 cgroups") was merged.

Fixes: bd1060a1d671 ("sock, cgroup: add sock->sk_cgroup")
Reported-by: Cameron Berkenpas 
Reported-by: Peter Geis 
Reported-by: Lu Fengqi 
Reported-by: Daniël Sonck 
Reported-by: Zhang Qiang 
Tested-by: Cameron Berkenpas 
Tested-by: Peter Geis 
Tested-by: Thomas Lamprecht 
Cc: Daniel Borkmann 
Cc: Zefan Li 
Cc: Tejun Heo 
Cc: Roman Gushchin 
Signed-off-by: Cong Wang 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

vlan: consolidate VLAN parsing code and limit max parsing depth

2020-07-22T07:33:56+00:00

[ Upstream commit 469aceddfa3ed16e17ee30533fae45e90f62efd8 ]

Toshiaki pointed out that we now have two very similar functions to extract
the L3 protocol number in the presence of VLAN tags. And Daniel pointed out
that the unbounded parsing loop makes it possible for maliciously crafted
packets to loop through potentially hundreds of tags.

Fix both of these issues by consolidating the two parsing functions and
limiting the VLAN tag parsing to a max depth of 8 tags. As part of this,
switch over __vlan_get_protocol() to use skb_header_pointer() instead of
pskb_may_pull(), to avoid the possible side effects of the latter and keep
the skb pointer 'const' through all the parsing functions.

v2:
- Use limit of 8 tags instead of 32 (matching XMIT_RECURSION_LIMIT)

Reported-by: Toshiaki Makita 
Reported-by: Daniel Borkmann 
Fixes: d7bf2ebebc2b ("sched: consistently handle layer3 header accesses in the presence of VLANs")
Signed-off-by: Toke Høiland-Jørgensen 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

sched: consistently handle layer3 header accesses in the presence of VLANs

2020-07-22T07:33:55+00:00

[ Upstream commit d7bf2ebebc2bd61ab95e2a8e33541ef282f303d4 ]

There are a couple of places in net/sched/ that check skb->protocol and act
on the value there. However, in the presence of VLAN tags, the value stored
in skb->protocol can be inconsistent based on whether VLAN acceleration is
enabled. The commit quoted in the Fixes tag below fixed the users of
skb->protocol to use a helper that will always see the VLAN ethertype.

However, most of the callers don't actually handle the VLAN ethertype, but
expect to find the IP header type in the protocol field. This means that
things like changing the ECN field, or parsing diffserv values, stops
working if there's a VLAN tag, or if there are multiple nested VLAN
tags (QinQ).

To fix this, change the helper to take an argument that indicates whether
the caller wants to skip the VLAN tags or not. When skipping VLAN tags, we
make sure to skip all of them, so behaviour is consistent even in QinQ
mode.

To make the helper usable from the ECN code, move it to if_vlan.h instead
of pkt_sched.h.

v3:
- Remove empty lines
- Move vlan variable definitions inside loop in skb_protocol()
- Also use skb_protocol() helper in IP{,6}_ECN_decapsulate() and
  bpf_skb_ecn_set_ce()

v2:
- Use eth_type_vlan() helper in skb_protocol()
- Also fix code that reads skb->protocol directly
- Change a couple of 'if/else if' statements to switch constructs to avoid
  calling the helper twice

Reported-by: Ilya Ponetayev 
Fixes: d8b9605d2697 ("net: sched: fix skb->protocol use in case of accelerated vlan path")
Signed-off-by: Toke Høiland-Jørgensen 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman