commit 41e684ef3f37ce6e5eac3fb5b9c7c1853f4b0447 upstream.

Until now the flex parser capability was used in ib_query_device() to
indicate tunnel_offloads_caps support for mpls_over_gre/mpls_over_udp.

Newer devices and firmware will have configurations with the flexparser
but without mpls support.

Testing for the flex parser capability was a mistake, the tunnel_stateless
capability was intended for detecting mpls and was introduced at the same
time as the flex parser capability.

Otherwise userspace will be incorrectly informed that a future device
supports MPLS when it does not.

Link: https://lore.kernel.org/r/20200305123841.196086-1-leon@kernel.org
Cc: <stable@vger.kernel.org> # 4.17
Fixes: e818e255a58d ("IB/mlx5: Expose MPLS related tunneling offloads")
Signed-off-by: Alex Vesker <valex@mellanox.com>
Reviewed-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ddfd9dcf270ce23ed1985b66fcfa163920e2e1b8 upstream.

Since commit fdde0ff8590b ("ACPI: PM: s2idle: Prevent spurious SCIs from
waking up the system") the SCI triggering without there being a wakeup
cause recognized by the ACPI sleep code will no longer wakeup the system.

This works as intended, but this is a problem for devices where the SCI
is shared with another device which is also a wakeup source.

In the past these, from the pov of the ACPI sleep code, spurious SCIs
would still cause a wakeup so the wakeup from the device sharing the
interrupt would actually wakeup the system. This now no longer works.

This is a problem on e.g. Bay Trail-T and Cherry Trail devices where
some peripherals (typically the XHCI controller) can signal a
Power Management Event (PME) to the Power Management Controller (PMC)
to wakeup the system, this uses the same interrupt as the SCI.
These wakeups are handled through a special INT0002 ACPI device which
checks for events in the GPE0a_STS for this and takes care of acking
the PME so that the shared interrupt stops triggering.

The change to the ACPI sleep code to ignore the spurious SCI, causes
the system to no longer wakeup on these PME events. To make things
worse this means that the INT0002 device driver interrupt handler will
no longer run, causing the PME to not get cleared and resulting in the
system hanging. Trying to wakeup the system after such a PME through e.g.
the power button no longer works.

Add an acpi_register_wakeup_handler() function which registers
a handler to be called from acpi_s2idle_wake() and when the handler
returns true, return true from acpi_s2idle_wake().

The INT0002 driver will use this mechanism to check the GPE0a_STS
register from acpi_s2idle_wake() and to tell the system to wakeup
if a PME is signaled in the register.

Fixes: fdde0ff8590b ("ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system")
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f400991bf872debffb01c46da882dc97d7e3248e upstream.

vt_dont_switch is pure boolean, no need for whole char.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20200219073951.16151-6-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit dce05aa6eec977f1472abed95ccd71276b9a3864 upstream.

Avoid global variables (namely sel_cons) by introducing vc_is_sel. It
checks whether the parameter is the current selection console. This will
help putting sel_cons to a struct later.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20200219073951.16151-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge vm fixes from Andrew Morton:
 "5 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm/sparse: fix kernel crash with pfn_section_valid check
  mm: fork: fix kernel_stack memcg stats for various stack implementations
  hugetlb_cgroup: fix illegal access to memory
  drivers/base/memory.c: indicate all memory blocks as removable
  mm/swapfile.c: move inode_lock out of claim_swapfile

Depending on CONFIG_VMAP_STACK and the THREAD_SIZE / PAGE_SIZE ratio the
space for task stacks can be allocated using __vmalloc_node_range(),
alloc_pages_node() and kmem_cache_alloc_node().

In the first and the second cases page->mem_cgroup pointer is set, but
in the third it's not: memcg membership of a slab page should be
determined using the memcg_from_slab_page() function, which looks at
page->slab_cache->memcg_params.memcg .  In this case, using
mod_memcg_page_state() (as in account_kernel_stack()) is incorrect:
page->mem_cgroup pointer is NULL even for pages charged to a non-root
memory cgroup.

It can lead to kernel_stack per-memcg counters permanently showing 0 on
some architectures (depending on the configuration).

In order to fix it, let's introduce a mod_memcg_obj_state() helper,
which takes a pointer to a kernel object as a first argument, uses
mem_cgroup_from_obj() to get a RCU-protected memcg pointer and calls
mod_memcg_state().  It allows to handle all possible configurations
(CONFIG_VMAP_STACK and various THREAD_SIZE/PAGE_SIZE values) without
spilling any memcg/kmem specifics into fork.c .

Note: This is a special version of the patch created for stable
backports.  It contains code from the following two patches:
  - mm: memcg/slab: introduce mem_cgroup_from_obj()
  - mm: fork: fix kernel_stack memcg stats for various stack implementations

[guro@fb.com: introduce mem_cgroup_from_obj()]
  Link: http://lkml.kernel.org/r/20200324004221.GA36662@carbon.dhcp.thefacebook.com
Fixes: 4d96ba353075 ("mm: memcg/slab: stop setting page->mem_cgroup pointer for slab pages")
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200303233550.251375-1-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking fixes from David Miller:

 1) Fix memory leak in vti6, from Torsten Hilbrich.

 2) Fix double free in xfrm_policy_timer, from YueHaibing.

 3) NL80211_ATTR_CHANNEL_WIDTH attribute is put with wrong type, from
    Johannes Berg.

 4) Wrong allocation failure check in qlcnic driver, from Xu Wang.

 5) Get ks8851-ml IO operations right, for real this time, from Marek
    Vasut.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (22 commits)
  r8169: fix PHY driver check on platforms w/o module softdeps
  net: ks8851-ml: Fix IO operations, again
  mlxsw: spectrum_mr: Fix list iteration in error path
  qlcnic: Fix bad kzalloc null test
  mac80211: set IEEE80211_TX_CTRL_PORT_CTRL_PROTO for nl80211 TX
  mac80211: mark station unauthorized before key removal
  mac80211: Check port authorization in the ieee80211_tx_dequeue() case
  cfg80211: Do not warn on same channel at the end of CSA
  mac80211: drop data frames without key on encrypted links
  ieee80211: fix HE SPR size calculation
  nl80211: fix NL80211_ATTR_CHANNEL_WIDTH attribute type
  xfrm: policy: Fix doulbe free in xfrm_policy_timer
  bpf: Explicitly memset some bpf info structures declared on the stack
  bpf: Explicitly memset the bpf_attr structure
  bpf: Sanitize the bpf_struct_ops tcp-cc name
  vti6: Fix memory leak of skb if input policy check fails
  esp: remove the skb from the chain when it's enqueued in cryptd_wq
  ipv6: xfrm6_tunnel.c: Use built-in RCU list checking
  xfrm: add the missing verify_sec_ctx_len check in xfrm_add_acquire
  xfrm: fix uctx len check in verify_sec_ctx_len
  ...

Pull i2c fixes from Wolfram Sang:
 "Three more driver bugfixes, and two doc improvements fixing build
  warnings while we are here"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: pca-platform: Use platform_irq_get_optional
  i2c: st: fix missing struct parameter description
  i2c: nvidia-gpu: Handle timeout correctly in gpu_i2c_check_status()
  i2c: fix a doc warning
  i2c: hix5hd2: add missed clk_disable_unprepare in remove

Daniel Borkmann says:

====================
pull-request: bpf 2020-03-27

The following pull-request contains BPF updates for your *net* tree.

We've added 3 non-merge commits during the last 4 day(s) which contain
a total of 4 files changed, 25 insertions(+), 20 deletions(-).

The main changes are:

1) Explicitly memset the bpf_attr structure on bpf() syscall to avoid
   having to rely on compiler to do so. Issues have been noticed on
   some compilers with padding and other oddities where the request was
   then unexpectedly rejected, from Greg Kroah-Hartman.

2) Sanitize the bpf_struct_ops TCP congestion control name in order to
   avoid problematic characters such as whitespaces, from Martin KaFai Lau.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Pull clk fixes from Stephen Boyd:
 "A handful of clk driver fixes.

  Mostly they're around the i.MX drivers fixing the parents of a few
  clks and making KASAN happy with how the message passing code works.

  Besides that we have a TI driver fix for the RTC parent and a fix for
  the basic gate type registration functions introduced this release
  where they didn't actually pass the arguments in the right places to
  the multiplexer function down below"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: imx: Align imx sc clock parent msg structs to 4
  clk: imx: Align imx sc clock msg structs to 4
  clk: Pass correct arguments to __clk_hw_register_gate()
  clk: ti: am43xx: Fix clock parent for RTC clock
  clk: imx8mp: Correct the enet_qos parent clock
  clk: imx8mp: Correct IMX8MP_CLK_HDMI_AXI clock parent