linux-stable.git/include/linux, branch v5.4.83

genirq/irqdomain: Add an irq_create_mapping_affinity() function

2020-12-11T12:23:30+00:00

commit bb4c6910c8b41623104c2e64a30615682689a54d upstream.

There is currently no way to convey the affinity of an interrupt
via irq_create_mapping(), which creates issues for devices that
expect that affinity to be managed by the kernel.

In order to sort this out, rename irq_create_mapping() to
irq_create_mapping_affinity() with an additional affinity parameter that
can be passed down to irq_domain_alloc_descs().

irq_create_mapping() is re-implemented as a wrapper around
irq_create_mapping_affinity().

No functional change.

Fixes: e75eafb9b039 ("genirq/msi: Switch to new irq spreading infrastructure")
Signed-off-by: Laurent Vivier 
Signed-off-by: Thomas Gleixner 
Reviewed-by: Greg Kurz 
Cc: Michael Ellerman 
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20201126082852.1178497-2-lvivier@redhat.com
Signed-off-by: Greg Kroah-Hartman

tty: Fix ->session locking

2020-12-11T12:23:28+00:00

commit c8bcd9c5be24fb9e6132e97da5a35e55a83e36b9 upstream.

Currently, locking of ->session is very inconsistent; most places
protect it using the legacy tty mutex, but disassociate_ctty(),
__do_SAK(), tiocspgrp() and tiocgsid() don't.
Two of the writers hold the ctrl_lock (because they already need it for
->pgrp), but __proc_set_tty() doesn't do that yet.

On a PREEMPT=y system, an unprivileged user can theoretically abuse
this broken locking to read 4 bytes of freed memory via TIOCGSID if
tiocgsid() is preempted long enough at the right point. (Other things
might also go wrong, especially if root-only ioctls are involved; I'm
not sure about that.)

Change the locking on ->session such that:

 - tty_lock() is held by all writers: By making disassociate_ctty()
   hold it. This should be fine because the same lock can already be
   taken through the call to tty_vhangup_session().
   The tricky part is that we need to shorten the area covered by
   siglock to be able to take tty_lock() without ugly retry logic; as
   far as I can tell, this should be fine, since nothing in the
   signal_struct is touched in the `if (tty)` branch.
 - ctrl_lock is held by all writers: By changing __proc_set_tty() to
   hold the lock a little longer.
 - All readers that aren't holding tty_lock() hold ctrl_lock: By
   adding locking to tiocgsid() and __do_SAK(), and expanding the area
   covered by ctrl_lock in tiocspgrp().

Cc: stable@kernel.org
Signed-off-by: Jann Horn 
Reviewed-by: Jiri Slaby 
Signed-off-by: Greg Kroah-Hartman

net/mlx5: DR, Proper handling of unsupported Connect-X6DX SW steering

2020-12-08T09:40:27+00:00

[ Upstream commit d421e466c2373095f165ddd25cbabd6c5b077928 ]

STEs format for Connect-X5 and Connect-X6DX different. Currently, on
Connext-X6DX the SW steering would break at some point when building STEs
w/o giving a proper error message. Fix this by checking the STE format of
the current device when initializing domain: add mlx5_ifc definitions for
Connect-X6DX SW steering, read FW capability to get the current format
version, and check this version when domain is being created.

Fixes: 26d688e33f88 ("net/mlx5: DR, Add Steering entry (STE) utilities")
Signed-off-by: Yevgeny Kliteynik 
Signed-off-by: Saeed Mahameed 
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

netfilter: clear skb->next in NF_HOOK_LIST()

2020-12-02T07:49:44+00:00

NF_HOOK_LIST() uses list_del() to remove skb from the linked list,
however, it is not sufficient as skb->next still points to other
skb. We should just call skb_list_del_init() to clear skb->next,
like the rest places which using skb list.

This has been fixed in upstream by commit ca58fbe06c54
("netfilter: add and use nf_hook_slow_list()").

Fixes: 9f17dbf04ddf ("netfilter: fix use-after-free in NF_HOOK_LIST")
Reported-by: liuzx@knownsec.com
Tested-by: liuzx@knownsec.com
Cc: Florian Westphal 
Cc: Edward Cree 
Cc: stable@vger.kernel.org # between 4.19 and 5.4
Signed-off-by: Cong Wang 
Signed-off-by: Greg Kroah-Hartman

spi: Introduce device-managed SPI controller allocation

2020-11-24T12:29:22+00:00

commit 5e844cc37a5cbaa460e68f9a989d321d63088a89 upstream.

SPI driver probing currently comprises two steps, whereas removal
comprises only one step:

    spi_alloc_master()
    spi_register_controller()

    spi_unregister_controller()

That's because spi_unregister_controller() calls device_unregister()
instead of device_del(), thereby releasing the reference on the
spi_controller which was obtained by spi_alloc_master().

An SPI driver's private data is contained in the same memory allocation
as the spi_controller struct.  Thus, once spi_unregister_controller()
has been called, the private data is inaccessible.  But some drivers
need to access it after spi_unregister_controller() to perform further
teardown steps.

Introduce devm_spi_alloc_master() and devm_spi_alloc_slave(), which
release a reference on the spi_controller struct only after the driver
has unbound, thereby keeping the memory allocation accessible.  Change
spi_unregister_controller() to not release a reference if the
spi_controller was allocated by one of these new devm functions.

The present commit is small enough to be backportable to stable.
It allows fixing drivers which use the private data in their ->remove()
hook after it's been freed.  It also allows fixing drivers which neglect
to release a reference on the spi_controller in the probe error path.

Long-term, most SPI drivers shall be moved over to the devm functions
introduced herein.  The few that can't shall be changed in a treewide
commit to explicitly release the last reference on the controller.
That commit shall amend spi_unregister_controller() to no longer release
a reference, thereby completing the migration.

As a result, the behaviour will be less surprising and more consistent
with subsystems such as IIO, which also includes the private data in the
allocation of the generic iio_dev struct, but calls device_del() in
iio_device_unregister().

Signed-off-by: Lukas Wunner 
Link: https://lore.kernel.org/r/272bae2ef08abd21388c98e23729886663d19192.1605121038.git.lukas@wunner.de
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

iommu/vt-d: Avoid panic if iommu init fails in tboot system

2020-11-24T12:29:17+00:00

[ Upstream commit 4d213e76a359e540ca786ee937da7f35faa8e5f8 ]

"intel_iommu=off" command line is used to disable iommu but iommu is force
enabled in a tboot system for security reason.

However for better performance on high speed network device, a new option
"intel_iommu=tboot_noforce" is introduced to disable the force on.

By default kernel should panic if iommu init fail in tboot for security
reason, but it's unnecessory if we use "intel_iommu=tboot_noforce,off".

Fix the code setting force_on and move intel_iommu_tboot_noforce
from tboot code to intel iommu code.

Fixes: 7304e8f28bb2 ("iommu/vt-d: Correctly disable Intel IOMMU force on")
Signed-off-by: Zhenzhong Duan 
Tested-by: Lukasz Hawrylko 
Acked-by: Lu Baolu 
Link: https://lore.kernel.org/r/20201110071908.3133-1-zhenzhong.duan@gmail.com
Signed-off-by: Will Deacon 
Signed-off-by: Sasha Levin

iommu/vt-d: Move intel_iommu_gfx_mapped to Intel IOMMU header

2020-11-24T12:29:17+00:00

[ Upstream commit c7eb900f5f45eeab1ea1bed997a2a12d8b5907bc ]

Static analyzer is not happy about intel_iommu_gfx_mapped declaration:

.../drivers/iommu/intel/iommu.c:364:5: warning: symbol 'intel_iommu_gfx_mapped' was not declared. Should it be static?

Move its declaration to Intel IOMMU header file.

Signed-off-by: Andy Shevchenko 
Reviewed-by: Lu Baolu 
Link: https://lore.kernel.org/r/20200828161212.71294-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Joerg Roedel 
Signed-off-by: Sasha Levin

swiotlb: using SIZE_MAX needs limits.h included

2020-11-24T12:29:04+00:00

[ Upstream commit f51778db088b2407ec177f2f4da0f6290602aa3f ]

After merging the drm-misc tree, linux-next build (arm
multi_v7_defconfig) failed like this:

In file included from drivers/gpu/drm/nouveau/nouveau_ttm.c:26:
include/linux/swiotlb.h: In function 'swiotlb_max_mapping_size':
include/linux/swiotlb.h:99:9: error: 'SIZE_MAX' undeclared (first use in this function)
   99 |  return SIZE_MAX;
      |         ^~~~~~~~
include/linux/swiotlb.h:7:1: note: 'SIZE_MAX' is defined in header ''; did you forget to '#include '?
    6 | #include 
  +++ |+#include 
    7 | #include 
include/linux/swiotlb.h:99:9: note: each undeclared identifier is reported only once for each function it appears in
   99 |  return SIZE_MAX;
      |         ^~~~~~~~

Caused by commit

  abe420bfae52 ("swiotlb: Introduce swiotlb_max_mapping_size()")

but only exposed by commit "drm/nouveu: fix swiotlb include"

Fix it by including linux/limits.h as appropriate.

Fixes: abe420bfae52 ("swiotlb: Introduce swiotlb_max_mapping_size()")
Signed-off-by: Stephen Rothwell 
Link: https://lore.kernel.org/r/20201102124327.2f82b2a7@canb.auug.org.au
Signed-off-by: Michael S. Tsirkin 
Signed-off-by: Sasha Levin

net/mlx5: Fix a race when moving command interface to events mode

2020-11-22T09:14:11+00:00

commit d43b7007dbd1195a5b6b83213e49b1516aaf6f5e upstream.

After driver creates (via FW command) an EQ for commands, the driver will
be informed on new commands completion by EQE. However, due to a race in
driver's internal command mode metadata update, some new commands will
still be miss-handled by driver as if we are in polling mode. Such commands
can get two non forced completion, leading to already freed command entry
access.

CREATE_EQ command, that maps EQ to the command queue must be posted to the
command queue while it is empty and no other command should be posted.

Add SW mechanism that once the CREATE_EQ command is about to be executed,
all other commands will return error without being sent to the FW. Allow
sending other commands only after successfully changing the driver's
internal command mode metadata.
We can safely return error to all other commands while creating the command
EQ, as all other commands might be sent from the user/application during
driver load. Application can rerun them later after driver's load was
finished.

Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Eran Ben Elisha 
Signed-off-by: Moshe Shemesh 
Signed-off-by: Saeed Mahameed 
Cc: Timo Rothenpieler 
Signed-off-by: Greg Kroah-Hartman

bpf: Don't rely on GCC attribute((optimize)) to disable GCSE

2020-11-18T18:20:26+00:00

[ Upstream commit 080b6f40763565f65ebb9540219c71ce885cf568 ]

Commit 3193c0836 ("bpf: Disable GCC -fgcse optimization for
___bpf_prog_run()") introduced a __no_fgcse macro that expands to a
function scope __attribute__((optimize("-fno-gcse"))), to disable a
GCC specific optimization that was causing trouble on x86 builds, and
was not expected to have any positive effect in the first place.

However, as the GCC manual documents, __attribute__((optimize))
is not for production use, and results in all other optimization
options to be forgotten for the function in question. This can
cause all kinds of trouble, but in one particular reported case,
it causes -fno-asynchronous-unwind-tables to be disregarded,
resulting in .eh_frame info to be emitted for the function.

This reverts commit 3193c0836, and instead, it disables the -fgcse
optimization for the entire source file, but only when building for
X86 using GCC with CONFIG_BPF_JIT_ALWAYS_ON disabled. Note that the
original commit states that CONFIG_RETPOLINE=n triggers the issue,
whereas CONFIG_RETPOLINE=y performs better without the optimization,
so it is kept disabled in both cases.

Fixes: 3193c0836f20 ("bpf: Disable GCC -fgcse optimization for ___bpf_prog_run()")
Signed-off-by: Ard Biesheuvel 
Signed-off-by: Alexei Starovoitov 
Tested-by: Geert Uytterhoeven 
Reviewed-by: Nick Desaulniers 
Link: https://lore.kernel.org/lkml/CAMuHMdUg0WJHEcq6to0-eODpXPOywLot6UD2=GFHpzoj_hCoBQ@mail.gmail.com/
Link: https://lore.kernel.org/bpf/20201028171506.15682-2-ardb@kernel.org
Signed-off-by: Sasha Levin